- 29 Dec, 2008 40 commits
-
-
Mauro Carvalho Chehab authored
Signed-off-by:Mauro Carvalho Chehab <mchehab@redhat.com>
-
Laurent Pinchart authored
Failed requests will now generate a one-time warning message instead of the usual "Failed to query..." error, which should be more user-friendly. The driver will also recover automatically from failed GET_MIN/GET_MAX requests when the device is half-broken without requiring the MINMAX quirk (fully broken devices still need the quirk). Signed-off-by:
Laurent Pinchart <laurent.pinchart@skynet.be> Signed-off-by:
-
Jean-Francois Moine authored
According to http://bugzilla.kernel.org/show_bug.cgi?id=11997, the driver sn9c102 does not work for this webcam. Signed-off-by:
Jean-Francois Moine <moinejf@free.fr> Signed-off-by:
-
Jean-Francois Moine authored
According to http://bugzilla.kernel.org/show_bug.cgi?id=11920, the driver sn9c102 does not work for this webcam. Signed-off-by:
-
Frederic Cand authored
Signed-off-by:
Frederic Cand <frederic.cand@anevia.com> Signed-off-by:
-
Alexey Klimov authored
Patch adds disabled controls in v4l2_queryctrl struct. Also version of driver corrected. -- Signed-off-by:
Alexey Klimov <klimov.linux@gmail.com> Signed-off-by:
-
Alexey Klimov authored
This patch adds support for suspend and resume methods in driver. Without this kradio and gnomeradio crashes during resume. Also .supports_autosuspend in usb_driver struct set equal to 0 to avoid suspending of module if usb_autosuspend enabled. Signed-off-by:
-
Mauro Carvalho Chehab authored
Some recent patches added a few bad whitespaces. Remove that. Signed-off-by: -
Laurent Pinchart authored
The UVC specification does not require frame descriptors to be sorted by bFrameIndex. At least one camera (145f:013e) is known not to sort the descriptors properly, so they need to be sorted during parsing as the driver then accesses them by index. Signed-off-by:
-
Laurent Pinchart authored
Signed-off-by:
-
Laurent Pinchart authored
Signed-off-by:
-
Jean-Francois Moine authored
Signed-off-by:
-
Jean-Francois Moine authored
This patch fixes the bad picture at low resolution (320x240). Signed-off-by:
-
Jean-Francois Moine authored
Signed-off-by:
-
Jean-Francois Moine authored
Signed-off-by:
-
Jean-Francois Moine authored
This patch - makes unuseful the temporary buffers - and also fixes the bad colors problem. Signed-off-by:
-
Frederic Cand authored
Signed-off-by:
-
Jean-Francois Moine authored
Signed-off-by:
-
Jean-Francois Moine authored
- The scan function must know about empty packets. - Packets starting with 0x80 must not be counted. - Wrong size of the translated frame. Signed-off-by:
-
Jean-Francois Moine authored
- This flag is needed by some subdrivers as tv8532 for start of frame detection. Signed-off-by:
-
Jean-Francois Moine authored
- usb_clear_halt() added in gspca and removed in finepix. Signed-off-by:
-
Hans de Goede authored
- This patch makes sonixb.c strife to different values during autoexposure for sif versus vga sensors. Signed-off-by:
Hans de Goede <hdegoede@redhat.com> Signed-off-by:
-
Jean-Francois Moine authored
Signed-off-by:
-
Igor M. Liplianin authored
Add TerraTec Cinergy S USB support Signed-off-by:
Igor M. Liplianin <liplianin@me.by> Acked-by:
Thorsten Leupold <th86@gmx.de> Signed-off-by:
-
Vincent Pelletier authored
Add support for the following inputs: - radio tuner - composite 1 & 2 (only 1 is physically available, but composite 2 is also advertised by windows driver) - svideo Signed-off-by:
Vincent Pelletier <plr.vincent@gmail.com> Acked-by:
Jean Delvare <khali@linux-fr.org> Signed-off-by:
-
Igor M. Liplianin authored
Remove usage core->prev_set_voltage from cx24116 based cards, as it does not make sense for the demod. Signed-off-by:
-
Igor M. Liplianin authored
The card based on stv0299 or stv0288 demodulators. Signed-off-by:
-
Igor M. Liplianin authored
The card based on stv0299 or stv0288 demodulators. Signed-off-by:
-
Mauro Carvalho Chehab authored
Signed-off-by: -
Igor M. Liplianin authored
Currently in stb0899 code it appears double .read_status assignment Send patch to fix it. Cc: Manu Abraham <abraham.manu@gmail.com> Signed-off-by:
-
Andy Walls authored
cx18: Fix PLL freq computation for debug display. The code to compute the PLL freq from register values was storing an intermediate 56 bit result in a 32 bit type, causing a nonsense value to be displayed. Signed-off-by:
Andy Walls <awalls@radix.net> Signed-off-by:
-
Robert Jarzmik authored
There were already 3 YUV formats defined : - YUYV - YVYU - UYVY The only left combination is VYUY, which is added in this patch. Signed-off-by:
Robert Jarzmik <robert.jarzmik@free.fr> Signed-off-by:
-
Patrice Levesque authored
There's a second PCI identifier for the ATI TV WONDER PRO card (0x1002:0x00f9). Attached is a patch to kernel 2.6.27 that adds autodetection for this version. Signed-off-by: -
Antti Palosaari authored
- add USB-ID 1b80:e396 for KWorld USB DVB-T TV Stick II (VS-DVBT 395U) Thanks-to: Bo Hansen <bohans@online.no> Signed-off-by:
Antti Palosaari <crope@iki.fi> Signed-off-by:
-
Jose Alberto Reguero authored
This patch add support for AverMedia Volar X remote. Signed-off-by:
Jose Alberto Reguero <jareguero@telefonica.net> Signed-off-by:
-
Alan McIvor authored
The BT8XX device driver currently only supports 16 such devices in a system. This is too small for many surveillance applications. This patch increases the number to 32. Signed-off-by:
Alan McIvor <alan.mcivor@reveal.co.nz> Signed-off-by:
-
Alan McIvor authored
The SAA7134 device driver currently only supports 8 such devices in a system. This is too small for many surveillance applications. This patch increases the number to 32. Signed-off-by:
-
Kay Sievers authored
This patch is part of a larger patch series which will remove the "char bus_id[20]" name string from struct device. The device name is managed in the kobject anyway, and without any size limitation, and just needlessly copied into "struct device". To set and read the device name dev_name(dev) and dev_set_name(dev) must be used. If your code uses static kobjects, which it shouldn't do, "const char *init_name" can be used to statically provide the name the registered device should have. At registration time, the init_name field is cleared, to enforce the use of dev_name(dev) to access the device name at a later time. We need to get rid of all occurrences of bus_id in the entire tree to be able to enable the new interface. Please apply this patch, and possibly convert any remaining remaining occurrences of bus_id. We want to submit a patch to -next, which will remove bus_id from "struct device", to find the remaining pieces to convert, and finally switch over to the new api, which will remove the 20 bytes array and does no longer have a size limitation. Thanks, Kay Signed-off-by:
Kay Sievers <kay.sievers@vrfy.org> Acked-by:
Greg Kroah-Hartman <gregkh@suse.de> Signed-off-by:
-
Huang Weiyi authored
The file(s) below do not use LINUX_VERSION_CODE nor KERNEL_VERSION. drivers/media/dvb/frontends/si21xx.c This patch removes the said #include <version.h>. Cc: Igor M. Liplianin <liplianin@tut.by> Signed-off-by:
Huang Weiyi <weiyi.huang@gmail.com> Signed-off-by:
-
Alexey Klimov authored
Patch removes warn(), err() and info() statements in drivers/media/radio/radio-mr800.c, and place dev_warn, dev_info in right places. Printk changed on pr_info and pr_err macro. Also new macro amradio_dev_warn defined. Name in usb driver struct changed on MR800_DRIVER_NAME. -- Signed-off-by:
David Ellingsworth <david@identd.dyndns.org> Signed-off-by:
-
