Skip to content

L
linux
Switch branch/tag
  1. 11 Jun, 2014 12 commits
    • Linus Lüssing's avatar
      bridge: memorize and export selected IGMP/MLD querier port · 2cd41431
      Linus Lüssing authored 
      Adding bridge support to the batman-adv multicast optimization requires
batman-adv knowing about the existence of bridged-in IGMP/MLD queriers
to be able to reliably serve any multicast listener behind this same
bridge.
Signed-off-by: default avatarLinus Lüssing <linus.luessing@web.de>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      2cd41431
    • Linus Lüssing's avatar
      bridge: add export of multicast database adjacent to net_dev · 07f8ac4a
      Linus Lüssing authored 
      With this new, exported function br_multicast_list_adjacent(net_dev) a
list of IPv4/6 addresses is returned. This list contains all multicast
addresses sensed by the bridge multicast snooping feature on all bridge
ports of the bridge interface of net_dev, excluding addresses from the
specified net_device itself.

Adding bridge support to the batman-adv multicast optimization requires
batman-adv knowing about the existence of bridged-in multicast
listeners to be able to reliably serve them with multicast packets.
Signed-off-by: default avatarLinus Lüssing <linus.luessing@web.de>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      07f8ac4a
    • Linus Lüssing's avatar
      bridge: adhere to querier election mechanism specified by RFCs · dc4eb53a
      Linus Lüssing authored 
      MLDv1 (RFC2710 section 6), MLDv2 (RFC3810 section 7.6.2), IGMPv2
(RFC2236 section 3) and IGMPv3 (RFC3376 section 6.6.2) specify that the
querier with lowest source address shall become the selected
querier.

So far the bridge stopped its querier as soon as it heard another
querier regardless of its source address. This results in the "wrong"
querier potentially becoming the active querier or a potential,
unnecessary querying delay.

With this patch the bridge memorizes the source address of the currently
selected querier and ignores queries from queriers with a higher source
address than the currently selected one. This slight optimization is
supposed to make it more RFC compliant (but is rather uncritical and
therefore probably not necessary to be queued for stable kernels).
Signed-off-by: default avatarLinus Lüssing <linus.luessing@web.de>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      dc4eb53a
    • Linus Lüssing's avatar
      bridge: rename struct bridge_mcast_query/querier · 90010b36
      Linus Lüssing authored 
      The current naming of these two structs is very random, in that
reversing their naming would not make any semantical difference.

This patch tries to make the naming less confusing by giving them a more
specific, distinguishable naming.

This is also useful for the upcoming patches reintroducing the
"struct bridge_mcast_querier" but for storing information about the
selected querier (no matter if our own or a foreign querier).
Signed-off-by: default avatarLinus Lüssing <linus.luessing@web.de>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      90010b36
    • David S. Miller's avatar
      Merge branch 'cxgb4' · c4d4c255
      David S. Miller authored 
      Hariprasad Shenai says:

====================
Adds support for CIQ and other misc. fixes for rdma/cxgb4

This patch series adds support to allocate and use IQs specifically for
indirect interrupts, adds fixes to align ISS for iWARP connections & fixes
related to tcp snd/rvd window for Chelsio T4/T5 adapters on iw_cxgb4.
Also changes Interrupt Holdoff Packet Count threshold of response queues for
cxgb4 driver.

The patches series is created against 'net-next' tree.
And includes patches on cxgb4 and iw_cxgb4 driver.

Since this patch-series contains cxgb4 and iw_cxgb4 patches, we would like to
request this patch series to get merged via David Miller's 'net-next' tree.

We have included all the maintainers of respective drivers. Kindly review the
change and let us know in case of any review comments.
====================
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      c4d4c255
    • Hariprasad Shenai's avatar
      cxgb4: Change default Interrupt Holdoff Packet Count Threshold · c887ad0e
      Hariprasad Shenai authored 
      Based on original work by Casey Leedom <leedom@chelsio.com>
Signed-off-by: default avatarCasey Leedom <leedom@chelsio.com>
Signed-off-by: default avatarHariprasad Shenai <hariprasad@chelsio.com>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      c887ad0e
    • Hariprasad Shenai's avatar
      iw_cxgb4: don't truncate the recv window size · b408ff28
      Hariprasad Shenai authored 
      Fixed a bug that shows up with recv window sizes that exceed the size of
the RCV_BUFSIZ field in opt0 (>= 1024K).  If the recv window exceeds
this, then we specify the max possible in opt0, add add the rest in via
a RX_DATA_ACK credits.
Signed-off-by: default avatarSteve Wise <swise@opengridcomputing.com>
Signed-off-by: default avatarHariprasad Shenai <hariprasad@chelsio.com>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      b408ff28
    • Hariprasad Shenai's avatar
      iw_cxgb4: Choose appropriate hw mtu index and ISS for iWARP connections · 92e7ae71
      Hariprasad Shenai authored 
      Select the appropriate hw mtu index and initial sequence number to optimize
hw memory performance.

Add new cxgb4_best_aligned_mtu() which allows callers to provide enough
information to be used to [possibly] select an MTU which will result in the
TCP Data Segment Size (AKA Maximum Segment Size) to be an aligned value.

If an RTR message exhange is required, then align the ISS to 8B - 1 + 4, so
that after the SYN the send seqno will align on a 4B boundary. The RTR
message exchange will leave the send seqno aligned on an 8B boundary.
If an RTR is not required, then align the ISS to 8B - 1.  The goal is
to have the send seqno be 8B aligned when we send the first FPDU.

Based on original work by Casey Leedom <leeedom@chelsio.com> and
Steve Wise <swise@opengridcomputing.com>
Signed-off-by: default avatarCasey Leedom <leedom@chelsio.com>
Signed-off-by: default avatarSteve Wise <swise@opengridcomputing.com>
Signed-off-by: default avatarHariprasad Shenai <hariprasad@chelsio.com>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      92e7ae71
    • Hariprasad Shenai's avatar
      iw_cxgb4: Allocate and use IQs specifically for indirect interrupts · cf38be6d
      Hariprasad Shenai authored 
      Currently indirect interrupts for RDMA CQs funnel through the LLD's RDMA
RXQs, which also handle direct interrupts for offload CPLs during RDMA
connection setup/teardown.  The intended T4 usage model, however, is to
have indirect interrupts flow through dedicated IQs. IE not to mix
indirect interrupts with CPL messages in an IQ.  This patch adds the
concept of RDMA concentrator IQs, or CIQs, setup and maintained by the
LLD and exported to iw_cxgb4 for use when creating CQs. RDMA CPLs will
flow through the LLD's RDMA RXQs, and CQ interrupts flow through the
CIQs.

Design:

cxgb4 creates and exports an array of CIQs for the RDMA ULD.  These IQs
are sized according to the max available CQs available at adapter init.
In addition, these IQs don't need FL buffers since they only service
indirect interrupts.  One CIQ is setup per RX channel similar to the
RDMA RXQs.

iw_cxgb4 will utilize these CIQs based on the vector value passed into
create_cq().  The num_comp_vectors advertised by iw_cxgb4 will be the
number of CIQs configured, and thus the vector value will be the index
into the array of CIQs.

Based on original work by Steve Wise <swise@opengridcomputing.com>
Signed-off-by: default avatarSteve Wise <swise@opengridcomputing.com>
Signed-off-by: default avatarHariprasad Shenai <hariprasad@chelsio.com>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      cf38be6d
    • stephen hemminger's avatar
      gre: allow changing mac address when device is up · f8c1b7ce
      stephen hemminger authored 
      There is no need to require forcing device down on a Ethernet GRE (gretap)
tunnel to change the MAC address.
Signed-off-by: default avatarStephen Hemminger <stephen@networkplumber.org>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      f8c1b7ce
    • Octavian Purdila's avatar
      tcp: add gfp parameter to tcp_fragment · 6cc55e09
      Octavian Purdila authored 
      tcp_fragment can be called from process context (from tso_fragment).
Add a new gfp parameter to allow it to preserve atomic memory if
possible.
Signed-off-by: default avatarOctavian Purdila <octavian.purdila@intel.com>
Reviewed-by: default avatarChristoph Paasch <christoph.paasch@uclouvain.be>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      6cc55e09
    • David S. Miller's avatar
      Merge branch 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/jkirsher/net-next · 27fa589d
      David S. Miller authored 
      Jeff Kirsher says:

====================
Intel Wired LAN Driver Updates 2014-06-09

This series contains more updates to i40e and i40evf.

Shannon adds checks for error status bits on the admin event queue and
provides notification if seen.  Cleans up unused variable and memory
allocation which was used earlier in driver development and is no longer
needed.  Also fixes the driver to not complain about removing
non-existent MAC addresses.  Bumps the driver versions for both i40e
and i40evf.

Catherine fixes a function header comment to make sure the comment correctly
reflects the function name.

Mitch adds code to allow for additional VSIs since the number of VSIs that
the firmware reports to us is a guaranteed minimum, not an absolute
maximum.  The hardware actually supports for more than the reported value,
which we often need.  Implements anti-spoofing for VFs for both MAC
addresses and VLANs, as well as enable this feature by default for all VFs.

Anjali changes the interrupt distribution policy to change the way
resources for special features are handled.  Fixes the driver to not fall
back to one queue if the only feature enabled is ATR, since FD_SB
and FD_ATR need to be checked independently in order to decide if we
will support multiple queue or not.  Allows the RSS table entry range
and GPS to be any number, not necessarily a power of 2 because hardware
does not restrict us to use a power of 2 GPS in the case of RSS as long as
we are not sharing the RSS table with another VSI (VMDq).

Frank modifies the driver to keep SR-IOV enabled in the case that RSS,
VMFq, FD_SB and DCB are disabled so that SR-IOV does not get turned off
unnecessarily.

Jesse fixes a bug in receive checksum where the driver was not marking
packets with bad checksums correctly, especially IPv6 packets with a bad
checksum.  To do this correctly, we need a define that may be set by
hardware in rare cases.

Greg fixes the driver to delete all the old and stale MAC filters for the
VF VSI when the host administrator changes the VF MAC address from under
its feet.
====================
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      27fa589d
  3. 09 Jun, 2014 13 commits
  5. 08 Jun, 2014 15 commits
GitLab Nexedi Edition | About GitLab | About Nexedi | 沪ICP备2021021310号-2 | 沪ICP备2021021310号-7