- 20 Aug, 2016 32 commits
-
-
Noa Osherovich authored
commit 0540d814 upstream. Some variables were not initialized properly: max_recv_wr, max_recv_sge, max_send_wr, qp_context and max_inline_data. Fixes: e126ba97 ('mlx5: Add driver for Mellanox Connect-IB...') Signed-off-by:
Noa Osherovich <noaos@mellanox.com> Signed-off-by:
Leon Romanovsky <leon@kernel.org> Reviewed-by:
Sagi Grimberg <sagi@grimberg.me> Signed-off-by:
Doug Ledford <dledford@redhat.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Artemy Kovalyov authored
commit e3353c26 upstream. Make MODIFY_QP command input structure compliant to specification Fixes: e126ba97 ('mlx5: Add driver for Mellanox Connect-IB adapters') Signed-off-by:
Artemy Kovalyov <artemyko@mellanox.com> Signed-off-by:
-
James Hogan authored
commit 6154c187 upstream. The LNKGET based atomic sequence in __cmpxchg_u32 has slightly incorrect constraints for the return value which under certain circumstances can allow an address unit register to be used as the first operand of a CMP instruction. This isn't a valid instruction however as the encodings only allow a data unit to be specified. This would result in an assembler error like the following: Error: failed to assemble instruction: "CMP A0.2,D0Ar6" Fix by changing the constraint from "=&da" (assigned, early clobbered, data or address unit register) to "=&d" (data unit register only). The constraint for the second operand, "bd" (an op2 register where op1 is a data unit register and the instruction supports O2R) is already correct assuming the first operand is a data unit register. Other cases of CMP in inline asm have had their constraints checked, and appear to all be fine. Fixes: 6006c0d8 ("metag: Atomics, locks and bitops") Signed-off-by:
James Hogan <james.hogan@imgtec.com> Cc: linux-metag@vger.kernel.org Signed-off-by:
-
Laura Abbott authored
commit b2e1c26f upstream. glibc recently did a sync up (94e73c95d9b5 "elf.h: Sync with the gabi webpage") that added a #define for EM_METAG but did not add relocations This triggers build errors: scripts/recordmcount.c: In function 'do_file': scripts/recordmcount.c:466:28: error: 'R_METAG_ADDR32' undeclared (first use in this function) case EM_METAG: reltype = R_METAG_ADDR32; ^~~~~~~~~~~~~~ scripts/recordmcount.c:466:28: note: each undeclared identifier is reported only once for each function it appears in scripts/recordmcount.c:468:20: error: 'R_METAG_NONE' undeclared (first use in this function) rel_type_nop = R_METAG_NONE; ^~~~~~~~~~~~ Work around this change with some more #ifdefery for the relocations. Fedora Bugzilla: https://bugzilla.redhat.com/show_bug.cgi?id=1354034 Link: http://lkml.kernel.org/r/1468005530-14757-1-git-send-email-labbott@redhat.com Cc: James Hogan <james.hogan@imgtec.com> Fixes: 00512bdd ("metag: ftrace support") Reported-by:
Ross Burton <ross.burton@intel.com> Signed-off-by:
Laura Abbott <labbott@redhat.com> Signed-off-by:
Steven Rostedt <rostedt@goodmis.org> Signed-off-by:
-
Konstantin Neumoin authored
commit 37cf99e0 upstream. The balloon has a special mechanism that is subscribed to the oom notification which leads to deflation for a fixed number of pages. The number is always fixed even when the balloon is fully deflated. But leak_balloon did not expect that the pages to deflate will be more than taken, and raise a "BUG" in balloon_page_dequeue when page list will be empty. So, the simplest solution would be to check that the number of releases pages is less or equal to the number taken pages. Signed-off-by:
Konstantin Neumoin <kneumoin@virtuozzo.com> Signed-off-by:
Denis V. Lunev <den@openvz.org> CC: Michael S. Tsirkin <mst@redhat.com> Signed-off-by:
Michael S. Tsirkin <mst@redhat.com> Signed-off-by:
-
Mario Kleiner authored
commit 196f954e upstream. This reverts commit 013dd9e0 ("drm/i915/dp: fall back to 18 bpp when sink capability is unknown") This commit introduced a regression into stable kernels, as it reduces output color depth to 6 bpc for any video sink connected to a Displayport connector if that sink doesn't report a specific color depth via EDID, or if our EDID parser doesn't actually recognize the proper bpc from EDID. Affected are active DisplayPort->VGA converters and active DisplayPort->DVI converters. Both should be able to handle 8 bpc, but are degraded to 6 bpc with this patch. The reverted commit was meant to fix Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=105331 A followup patch implements a fix for that specific bug, which is caused by a faulty EDID of the affected DP panel by adding a new EDID quirk for that panel. DP 18 bpp fallback handling and other improvements to DP sink bpc detection will be handled for future kernels in a separate series of patches. Please backport to stable. Signed-off-by:
Mario Kleiner <mario.kleiner.de@gmail.com> Acked-by:
Jani Nikula <jani.nikula@intel.com> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by:
Dave Airlie <airlied@redhat.com> Signed-off-by:
-
Alex Deucher authored
commit d3200be6 upstream. Same interface as other UNIPHY blocks Signed-off-by:
Alex Deucher <alexander.deucher@amd.com> Signed-off-by:
-
Alex Deucher authored
commit 3edc38a0 upstream. Some of the checks didn't handle frev 2 tables properly. Signed-off-by:
-
Lyude authored
commit 14ff8d48 upstream. DRM_CONNECTOR_POLL_CONNECT only enables polling for connections, not disconnections. Because of this, we end up losing hotplug polling for analog connectors once they get connected. Easy way to reproduce: - Grab a machine with a radeon GPU and a VGA port - Plug a monitor into the VGA port, wait for it to update the connector from disconnected to connected - Disconnect the monitor on VGA, a hotplug event is never sent for the removal of the connector. Originally, only using DRM_CONNECTOR_POLL_CONNECT might have been a good idea since doing VGA polling can sometimes result in having to mess with the DAC voltages to figure out whether or not there's actually something there since VGA doesn't have HPD. Doing this would have the potential of showing visible artifacts on the screen every time we ran a poll while a VGA display was connected. Luckily, radeon_vga_detect() only resorts to this sort of polling if the poll is forced, and DRM's polling helper doesn't force it's polls. Additionally, this removes some assignments to connector->polled that weren't actually doing anything. Signed-off-by:
Lyude <cpaul@redhat.com> Signed-off-by:
-
Alex Deucher authored
commit d814b24f upstream. ATPX dGPU power control requires a 200ms delay between power off and on. This should fix dGPU failures on resume from power off. Reviewed-by:
Hawking Zhang <Hawking.Zhang@amd.com> Acked-by:
Christian König <christian.koenig@amd.com> Signed-off-by:
-
Paul Moore authored
commit 0e0e3677 upstream. It seems risky to always rely on the caller to ensure the socket's address family is correct before passing it to the NetLabel kAPI, especially since we see at least one LSM which didn't. Add address family checks to the *_delattr() functions to help prevent future problems. Reported-by:
Maninder Singh <maninder1.s@samsung.com> Signed-off-by:
Paul Moore <paul@paul-moore.com> Signed-off-by:
-
Steve Capper authored
commit 56530f5d upstream. Currently pmd_mknotpresent will use a zero entry to respresent an invalidated pmd. Unfortunately this definition clashes with pmd_none, thus it is possible for a race condition to occur if zap_pmd_range sees pmd_none whilst __split_huge_pmd_locked is running too with pmdp_invalidate just called. This patch fixes the race condition by modifying pmd_mknotpresent to create non-zero faulting entries (as is done in other architectures), removing the ambiguity with pmd_none. [catalin.marinas@arm.com: using L_PMD_SECT_VALID instead of PMD_TYPE_SECT] Fixes: 8d962507 ("ARM: mm: Transparent huge page support for LPAE systems.") Cc: <stable@vger.kernel.org> # 3.11+ Reported-by:
Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Acked-by:
Will Deacon <will.deacon@arm.com> Cc: Russell King <linux@armlinux.org.uk> Signed-off-by:
Steve Capper <steve.capper@arm.com> Signed-off-by:
Catalin Marinas <catalin.marinas@arm.com> Signed-off-by:
Russell King <rmk+kernel@arm.linux.org.uk> Signed-off-by:
-
Eric Dumazet authored
commit 197c949e upstream. Backport of this upstream commit into stable kernels : 89c22d8c ("net: Fix skb csum races when peeking") exposed a bug in udp stack vs MSG_PEEK support, when user provides a buffer smaller than skb payload. In this case, skb_copy_and_csum_datagram_iovec(skb, sizeof(struct udphdr), msg->msg_iov); returns -EFAULT. This bug does not happen in upstream kernels since Al Viro did a great job to replace this into : skb_copy_and_csum_datagram_msg(skb, sizeof(struct udphdr), msg); This variant is safe vs short buffers. For the time being, instead reverting Herbert Xu patch and add back skb->ip_summed invalid changes, simply store the result of udp_lib_checksum_complete() so that we avoid computing the checksum a second time, and avoid the problematic skb_copy_and_csum_datagram_iovec() call. This patch can be applied on recent kernels as it avoids a double checksumming, then backported to stable kernels as a bug fix. Signed-off-by:
Eric Dumazet <edumazet@google.com> Acked-by:
Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by:
David S. Miller <davem@davemloft.net> [ luis: backported to 3.16: adjusted context ] Signed-off-by:
Luis Henriques <luis.henriques@canonical.com> Signed-off-by:
Charles (Chas) Williams <ciwillia@brocade.com> Signed-off-by:
-
Kangjie Lu authored
commit 681fef83 upstream. The stack object “ci” has a total size of 8 bytes. Its last 3 bytes are padding bytes which are not initialized and leaked to userland via “copy_to_user”. Signed-off-by:
Kangjie Lu <kjlu@gatech.edu> Signed-off-by:
-
Benjamin Coddington authored
commit 149a4fdd upstream. NFS doesn't expect requests with wb_bytes set to zero and may make unexpected decisions about how to handle that request at the page IO layer. Skip request creation if we won't have any wb_bytes in the request. Signed-off-by:
Benjamin Coddington <bcodding@redhat.com> Signed-off-by:
Alexey Dobriyan <adobriyan@gmail.com> Reviewed-by:
Weston Andros Adamson <dros@primarydata.com> Signed-off-by:
Trond Myklebust <trond.myklebust@primarydata.com> Signed-off-by:
-
James Hogan authored
commit 9b731bcf upstream. Propagate errors from kvm_mips_handle_kseg0_tlb_fault() and kvm_mips_handle_mapped_seg_tlb_fault(), usually triggering an internal error since they normally indicate the guest accessed bad physical memory or the commpage in an unexpected way. Fixes: 858dd5d4 ("KVM/MIPS32: MMU/TLB operations for the Guest.") Fixes: e685c689 ("KVM/MIPS32: Privileged instruction/target branch emulation.") Signed-off-by:
Radim Krčmář <rkrcmar@redhat.com> [james.hogan@imgtec.com: Backport to v3.10.y - v3.15.y] Signed-off-by:
-
James Hogan authored
commit 0741f52d upstream. Two consecutive gfns are loaded into host TLB, so ensure the range check isn't off by one if guest_pmap_npages is odd. Fixes: 858dd5d4 ("KVM/MIPS32: MMU/TLB operations for the Guest.") Signed-off-by:
-
James Hogan authored
commit 8985d503 upstream. kvm_mips_handle_mapped_seg_tlb_fault() calculates the guest frame number based on the guest TLB EntryLo values, however it is not range checked to ensure it lies within the guest_pmap. If the physical memory the guest refers to is out of range then dump the guest TLB and emit an internal error. Fixes: 858dd5d4 ("KVM/MIPS32: MMU/TLB operations for the Guest.") Signed-off-by:
-
James Hogan authored
commit c604cffa upstream. kvm_mips_handle_mapped_seg_tlb_fault() appears to map the guest page at virtual address 0 to PFN 0 if the guest has created its own mapping there. The intention is unclear, but it may have been an attempt to protect the zero page from being mapped to anything but the comm page in code paths you wouldn't expect from genuine commpage accesses (guest kernel mode cache instructions on that address, hitting trapping instructions when executing from that address with a coincidental TLB eviction during the KVM handling, and guest user mode accesses to that address). Fix this to check for mappings exactly at KVM_GUEST_COMMPAGE_ADDR (it may not be at address 0 since commit 42aa12e7 ("MIPS: KVM: Move commpage so 0x0 is unmapped")), and set the corresponding EntryLo to be interpreted as 0 (invalid). Fixes: 858dd5d4 ("KVM/MIPS32: MMU/TLB operations for the Guest.") Signed-off-by:
-
Theodore Ts'o authored
commit 9b4d0087 upstream. Since systemd is consistently using /dev/urandom before it is initialized, we can't see the other potentially dangerous users of /dev/urandom immediately after boot. So print the first ten such complaints instead. Signed-off-by:
Theodore Ts'o <tytso@mit.edu> Signed-off-by:
-
Pavel Shilovsky authored
commit 7893242e upstream. During following a symbolic link we received err_buf from SMB2_open(). While the validity of SMB2 error response is checked previously in smb2_check_message() a symbolic link payload is not checked at all. Fix it by adding such checks. Cc: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by:
Pavel Shilovsky <pshilovsky@samba.org> Signed-off-by:
Steve French <smfrench@gmail.com> Signed-off-by:
-
Rabin Vincent authored
commit bd975d1e upstream. The secmech hmac(md5) structures are present in the TCP_Server_Info struct and can be shared among multiple CIFS sessions. However, the server mutex is not currently held when these structures are allocated and used, which can lead to a kernel crashes, as in the scenario below: mount.cifs(8) #1 mount.cifs(8) #2 Is secmech.sdeschmaccmd5 allocated? // false Is secmech.sdeschmaccmd5 allocated? // false secmech.hmacmd = crypto_alloc_shash.. secmech.sdeschmaccmd5 = kzalloc.. sdeschmaccmd5->shash.tfm = &secmec.hmacmd; secmech.sdeschmaccmd5 = kzalloc // sdeschmaccmd5->shash.tfm // not yet assigned crypto_shash_update() deref NULL sdeschmaccmd5->shash.tfm Unable to handle kernel paging request at virtual address 00000030 epc : 8027ba34 crypto_shash_update+0x38/0x158 ra : 8020f2e8 setup_ntlmv2_rsp+0x4bc/0xa84 Call Trace: crypto_shash_update+0x38/0x158 setup_ntlmv2_rsp+0x4bc/0xa84 build_ntlmssp_auth_blob+0xbc/0x34c sess_auth_rawntlmssp_authenticate+0xac/0x248 CIFS_SessSetup+0xf0/0x178 cifs_setup_session+0x4c/0x84 cifs_get_smb_ses+0x2c8/0x314 cifs_mount+0x38c/0x76c cifs_do_mount+0x98/0x440 mount_fs+0x20/0xc0 vfs_kern_mount+0x58/0x138 do_mount+0x1e8/0xccc SyS_mount+0x88/0xd4 syscall_common+0x30/0x54 Fix this by locking the srv_mutex around the code which uses these hmac(md5) structures. All the other secmech algos already have similar locking. Fixes: 95dc8dd1 ("Limit allocation of crypto mechanisms to dialect which requires") Signed-off-by:
Rabin Vincent <rabinv@axis.com> Acked-by:
Sachin Prabhu <sprabhu@redhat.com> Signed-off-by:
-
Sachin Prabhu authored
commit 8d9535b6 upstream. When opening a file with O_CREAT flag, check to see if the file opened is an existing directory. This prevents the directory from being opened which subsequently causes a crash when the close function for directories cifs_closedir() is called which frees up the file->private_data memory while the file is still listed on the open file list for the tcon. Signed-off-by:
Xiaoli Feng <xifeng@redhat.com> Signed-off-by:
-
Amadeusz Sławiński authored
commit 23bc6ab0 upstream. When we retrieve imtu value from userspace we should use 16 bit pointer cast instead of 32 as it's defined that way in headers. Fixes setsockopt calls on big-endian platforms. Signed-off-by:
Amadeusz Sławiński <amadeusz.slawinski@tieto.com> Signed-off-by:
Marcel Holtmann <marcel@holtmann.org> Signed-off-by:
-
Javier Martinez Canillas authored
commit 6311f126 upstream. When s5p_mfc_remove() calls put_device() for the reserved memory region devs, the driver core warns that the dev doesn't have a release callback: WARNING: CPU: 0 PID: 591 at drivers/base/core.c:251 device_release+0x8c/0x90 Device 's5p-mfc-l' does not have a release() function, it is broken and must be fixed. Also, the declared DMA memory using dma_declare_coherent_memory() isn't relased so add a dev .release that calls dma_release_declared_memory(). Fixes: 6e83e6e2 ("[media] s5p-mfc: Fix kernel warning on memory init") Signed-off-by:
Javier Martinez Canillas <javier@osg.samsung.com> Tested-by:
Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by:
Sylwester Nawrocki <s.nawrocki@samsung.com> Signed-off-by:
-
Javier Martinez Canillas authored
commit 29debab0 upstream. The devices don't have a name set, so makes dev_name() returns NULL which makes harder to identify the devices that are causing issues, for example: WARNING: CPU: 2 PID: 616 at drivers/base/core.c:251 device_release+0x8c/0x90 Device '(null)' does not have a release() function, it is broken and must be fixed. And after setting the device name: WARNING: CPU: 0 PID: 591 at drivers/base/core.c:251 device_release+0x8c/0x90 Device 's5p-mfc-l' does not have a release() function, it is broken and must be fixed. Fixes: 6e83e6e2 ("[media] s5p-mfc: Fix kernel warning on memory init") Signed-off-by:
-
Alex Hung authored
commit fc8a601e upstream. Several users reported wifi cannot be unblocked as discussed in [1]. This patch removes the use of the 2009 flag by BIOS but uses the actual WMI function calls - it will be skipped if WMI reports unsupported. [1] https://bugzilla.kernel.org/show_bug.cgi?id=69131Signed-off-by:
Alex Hung <alex.hung@canonical.com> Tested-by:
Evgenii Shatokhin <eugene.shatokhin@yandex.ru> Signed-off-by:
Darren Hart <dvhart@linux.intel.com> Signed-off-by:
-
Andy Shevchenko authored
commit 3dbd3212 upstream. The commit d56d6b3d ("gpio: langwell: add Intel Merrifield support") doesn't look at all as a proper support for Intel Merrifield and I dare to say that it distorts the behaviour of the hardware. The register map is different on Intel Merrifield, i.e. only 6 out of 8 register have the same purpose but none of them has same location in the address space. The current case potentially harmful to existing hardware since it's poking registers on wrong offsets and may set some pin to be GPIO output when connected hardware doesn't expect such. Besides the above GPIO and pinctrl on Intel Merrifield have been located in different IP blocks. The functionality has been extended as well, i.e. added support of level interrupts, special registers for wake capable sources and thus, in my opinion, requires a completele separate driver. If someone wondering the existing gpio-intel-mid.c would be converted to actual pinctrl (which by the fact it is now), though I wouldn't be a volunteer to do that. Fixes: d56d6b3d ("gpio: langwell: add Intel Merrifield support") Signed-off-by:
Andy Shevchenko <andriy.shevchenko@linux.intel.com> Reviewed-by:
Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by:
Linus Walleij <linus.walleij@linaro.org> Signed-off-by:
-
Vignesh R authored
commit a246b819 upstream. NBANK() macro assumes that ngpios is a multiple of 8(BANK_SZ) and hence results in 0 banks for PCA9536 which has just 4 gpios. This is wrong as PCA9356 has 1 bank with 4 gpios. This results in uninitialized PCA953X_INVERT register. Fix this by using DIV_ROUND_UP macro in NBANK(). Signed-off-by:
Vignesh R <vigneshr@ti.com> Signed-off-by:
-
Daniele Palmas authored
commit 3c0415fa upstream. This patch adds support for 0x1206 PID of Telit LE910. Since the interfaces positions are the same than the ones for 0x1043 PID of Telit LE922, telit_le922_blacklist_usbcfg3 is used. Signed-off-by:
Daniele Palmas <dnlplm@gmail.com> Signed-off-by:
Johan Hovold <johan@kernel.org> Signed-off-by:
-
Yoshihiro Shimoda authored
commit 15e4292a upstream. This patch fixes an issue that the CFIFOSEL register value is possible to be changed by usbhsg_ep_enable() wrongly. And then, a data transfer using CFIFO may not work correctly. For example: # modprobe g_multi file=usb-storage.bin # ifconfig usb0 192.168.1.1 up (During the USB host is sending file to the mass storage) # ifconfig usb0 down In this case, since the u_ether.c may call usb_ep_enable() in eth_stop(), if the renesas_usbhs driver is also using CFIFO for mass storage, the mass storage may not work correctly. So, this patch adds usbhs_lock() and usbhs_unlock() calling in usbhsg_ep_enable() to protect CFIFOSEL register. This is because: - CFIFOSEL.CURPIPE = 0 is also needed for the pipe configuration - The CFIFOSEL (fifo->sel) is already protected by usbhs_lock() Fixes: 97664a20 ("usb: renesas_usbhs: shrink spin lock area") Signed-off-by:
Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Signed-off-by:
Felipe Balbi <felipe.balbi@linux.intel.com> Signed-off-by:
-
Greg Kroah-Hartman authored
When backporting upstream commit 75ff39cc ("tcp: make challenge acks less predictable") I negelected to use the correct ACCESS* type macros. This fixes that up to hopefully speed things up a bit more. Thanks to Chas Wiliams for the 3.10 backport which reminded me of this. Cc: Yue Cao <ycao009@ucr.edu> Cc: Eric Dumazet <edumazet@google.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Yuchung Cheng <ycheng@google.com> Cc: Neal Cardwell <ncardwell@google.com> Cc: Neal Cardwell <ncardwell@google.com> Cc: Yuchung Cheng <ycheng@google.com> Cc: David S. Miller <davem@davemloft.net> Cc: Chas Williams <ciwillia@brocade.com> Cc: Willy Tarreau <w@1wt.eu> Signed-off-by:
-
- 16 Aug, 2016 8 commits
-
-
Greg Kroah-Hartman authored
-
Vegard Nossum authored
commit 554a5ccc upstream. If we hit this error when mounted with errors=continue or errors=remount-ro: EXT4-fs error (device loop0): ext4_mb_mark_diskspace_used:2940: comm ext4.exe: Allocating blocks 5090-6081 which overlap fs metadata then ext4_mb_new_blocks() will call ext4_mb_release_context() and try to continue. However, ext4_mb_release_context() is the wrong thing to call here since we are still actually using the allocation context. Instead, just error out. We could retry the allocation, but there is a possibility of getting stuck in an infinite loop instead, so this seems safer. [ Fixed up so we don't return EAGAIN to userspace. --tytso ] Fixes: 8556e8f3 ("ext4: Don't allow new groups to be added during block allocation") Signed-off-by:
Vegard Nossum <vegard.nossum@oracle.com> Signed-off-by:
-
Eric Dumazet authored
[ Upstream commit 75ff39cc ] Yue Cao claims that current host rate limiting of challenge ACKS (RFC 5961) could leak enough information to allow a patient attacker to hijack TCP sessions. He will soon provide details in an academic paper. This patch increases the default limit from 100 to 1000, and adds some randomization so that the attacker can no longer hijack sessions without spending a considerable amount of probes. Based on initial analysis and patch from Linus. Note that we also have per socket rate limiting, so it is tempting to remove the host limit in the future. v2: randomize the count of challenge acks per second, not the period. Fixes: 282f23c6 ("tcp: implement RFC 5961 3.2") Reported-by:
Yue Cao <ycao009@ucr.edu> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org> Cc: Yuchung Cheng <ycheng@google.com> Cc: Neal Cardwell <ncardwell@google.com> Acked-by:
Neal Cardwell <ncardwell@google.com> Acked-by:
Yuchung Cheng <ycheng@google.com> Signed-off-by:
-
Soheil Hassas Yeganeh authored
[ Upstream commit f626300a ] tcp_select_initial_window() intends to advertise a window scaling for the maximum possible window size. To do so, it considers the maximum of net.ipv4.tcp_rmem[2] and net.core.rmem_max as the only possible upper-bounds. However, users with CAP_NET_ADMIN can use SO_RCVBUFFORCE to set the socket's receive buffer size to values larger than net.ipv4.tcp_rmem[2] and net.core.rmem_max. Thus, SO_RCVBUFFORCE is effectively ignored by tcp_select_initial_window(). To fix this, consider the maximum of net.ipv4.tcp_rmem[2], net.core.rmem_max and socket's initial buffer space. Fixes: b0573dea ("[NET]: Introduce SO_{SND,RCV}BUFFORCE socket options") Signed-off-by:
Soheil Hassas Yeganeh <soheil@google.com> Suggested-by:
-
Vegard Nossum authored
[ Upstream commit d3e6952c ] I ran into this: kasan: CONFIG_KASAN_INLINE enabled kasan: GPF could be caused by NULL-ptr deref or user memory access general protection fault: 0000 [#1] PREEMPT SMP KASAN CPU: 2 PID: 2012 Comm: trinity-c3 Not tainted 4.7.0-rc7+ #19 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Ubuntu-1.8.2-1ubuntu1 04/01/2014 task: ffff8800b745f2c0 ti: ffff880111740000 task.ti: ffff880111740000 RIP: 0010:[<ffffffff82bbf066>] [<ffffffff82bbf066>] irttp_connect_request+0x36/0x710 RSP: 0018:ffff880111747bb8 EFLAGS: 00010286 RAX: dffffc0000000000 RBX: 0000000000000000 RCX: 0000000069dd8358 RDX: 0000000000000009 RSI: 0000000000000027 RDI: 0000000000000048 RBP: ffff880111747c00 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000069dd8358 R11: 1ffffffff0759723 R12: 0000000000000000 R13: ffff88011a7e4780 R14: 0000000000000027 R15: 0000000000000000 FS: 00007fc738404700(0000) GS:ffff88011af00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007fc737fdfb10 CR3: 0000000118087000 CR4: 00000000000006e0 Stack: 0000000000000200 ffff880111747bd8 ffffffff810ee611 ffff880119f1f220 ffff880119f1f4f8 ffff880119f1f4f0 ffff88011a7e4780 ffff880119f1f232 ffff880119f1f220 ffff880111747d58 ffffffff82bca542 0000000000000000 Call Trace: [<ffffffff82bca542>] irda_connect+0x562/0x1190 [<ffffffff825ae582>] SYSC_connect+0x202/0x2a0 [<ffffffff825b4489>] SyS_connect+0x9/0x10 [<ffffffff8100334c>] do_syscall_64+0x19c/0x410 [<ffffffff83295ca5>] entry_SYSCALL64_slow_path+0x25/0x25 Code: 41 89 ca 48 89 e5 41 57 41 56 41 55 41 54 41 89 d7 53 48 89 fb 48 83 c7 48 48 89 fa 41 89 f6 48 c1 ea 03 48 83 ec 20 4c 8b 65 10 <0f> b6 04 02 84 c0 74 08 84 c0 0f 8e 4c 04 00 00 80 7b 48 00 74 RIP [<ffffffff82bbf066>] irttp_connect_request+0x36/0x710 RSP <ffff880111747bb8> ---[ end trace 4cda2588bc055b30 ]--- The problem is that irda_open_tsap() can fail and leave self->tsap = NULL, and then irttp_connect_request() almost immediately dereferences it. Cc: stable@vger.kernel.org Signed-off-by:
-
Beniamino Galvani authored
[ Upstream commit 005db31d ] Commit e826eafa ("bonding: Call netif_carrier_off after register_netdevice") moved netif_carrier_off() from bond_init() to bond_create(), but the latter is called only for initial default devices and ones created through sysfs: $ modprobe bonding $ echo +bond1 > /sys/class/net/bonding_masters $ ip link add bond2 type bond $ grep "MII Status" /proc/net/bonding/* /proc/net/bonding/bond0:MII Status: down /proc/net/bonding/bond1:MII Status: down /proc/net/bonding/bond2:MII Status: up Ensure that carrier is initially off also for devices created through netlink. Signed-off-by:
Beniamino Galvani <bgalvani@redhat.com> Signed-off-by:
-
Vegard Nossum authored
commit c65d5c6c upstream. If we encounter a filesystem error during orphan cleanup, we should stop. Otherwise, we may end up in an infinite loop where the same inode is processed again and again. EXT4-fs (loop0): warning: checktime reached, running e2fsck is recommended EXT4-fs error (device loop0): ext4_mb_generate_buddy:758: group 2, block bitmap and bg descriptor inconsistent: 6117 vs 0 free clusters Aborting journal on device loop0-8. EXT4-fs (loop0): Remounting filesystem read-only EXT4-fs error (device loop0) in ext4_free_blocks:4895: Journal has aborted EXT4-fs error (device loop0) in ext4_do_update_inode:4893: Journal has aborted EXT4-fs error (device loop0) in ext4_do_update_inode:4893: Journal has aborted EXT4-fs error (device loop0) in ext4_ext_remove_space:3068: IO failure EXT4-fs error (device loop0) in ext4_ext_truncate:4667: Journal has aborted EXT4-fs error (device loop0) in ext4_orphan_del:2927: Journal has aborted EXT4-fs error (device loop0) in ext4_do_update_inode:4893: Journal has aborted EXT4-fs (loop0): Inode 16 (00000000618192a0): orphan list check failed! [...] EXT4-fs (loop0): Inode 16 (0000000061819748): orphan list check failed! [...] EXT4-fs (loop0): Inode 16 (0000000061819bf0): orphan list check failed! [...] See-also: c9eb13a9 ("ext4: fix hang when processing corrupted orphaned inode list") Cc: Jan Kara <jack@suse.cz> Signed-off-by:
-
Vegard Nossum authored
commit 6a7fd522 upstream. If ext4_fill_super() fails early, it's possible for ext4_evict_inode() to call ext4_should_journal_data() before superblock options and flags are fully set up. In that case, the iput() on the journal inode can end up causing a BUG(). Work around this problem by reordering the tests so we only call ext4_should_journal_data() after we know it's not the journal inode. Fixes: 2d859db3 ("ext4: fix data corruption in inodes with journalled data") Fixes: 2b405bfa ("ext4: fix data=journal fast mount/umount hang") Cc: Jan Kara <jack@suse.cz> Signed-off-by:
Jan Kara <jack@suse.cz> Signed-off-by:
-
