Skip to content

L
linux
Switch branch/tag
  1. 24 Sep, 2011 8 commits
  3. 23 Sep, 2011 10 commits
  5. 22 Sep, 2011 10 commits
  7. 21 Sep, 2011 12 commits
    • Lutz Sammer's avatar
      [media] TT-budget S2-3200 cannot tune on HB13E DVBS2 transponder · 699cc196
      Lutz Sammer authored 
      The FEC fix patch fixed locking on 11,681 Ghz, but not on 12,692 Ghz for
me.
Reviewed-by: default avatarManu Abraham <manu@linuxtv.org>
Signed-off-by: default avatarMauro Carvalho Chehab <mchehab@redhat.com>
      699cc196
    • tvboxspy's avatar
      [media] [2/2,ver,1.90] DM04/QQBOX Reduce USB buffer size · 810fda9b
      tvboxspy authored 
      Reduced unused buffer size to 64.
Signed-off-by: default avatarMalcolm Priestley <tvboxspy@gmail.com>
Signed-off-by: default avatarMauro Carvalho Chehab <mchehab@redhat.com>
      810fda9b
    • tvboxspy's avatar
      [media] [1/2,ver,1.89] DM04/QQBOX Interupt Urb and Timing changes · 95c21c41
      tvboxspy authored 
      Reduce buffer size of Interupt urb to 128 bytes and polling
interval to 8.

The devices buffer appears to only handle a maxium of 40 bytes.
If the buffer is full a slowing effect is noticed causing occasionnal
dropped streaming packets.
Signed-off-by: default avatarMalcolm Priestley <tvboxspy@gmail.com>
Signed-off-by: default avatarMauro Carvalho Chehab <mchehab@redhat.com>
      95c21c41
    • Yang Ruirui's avatar
      [media] v4l2: uvcvideo use after free bug fix · 69803ecf
      Yang Ruirui authored 
      Unplugging uvc video camera trigger following oops:

eeepc kernel: [ 1393.500719] usb 3-2: USB disconnect, device number 4
eeepc kernel: [ 1393.504351] uvcvideo: Failed to resubmit video URB (-19).
eeepc kernel: [ 1495.428853] BUG: unable to handle kernel paging request at 6b6b6bcb
eeepc kernel: [ 1495.429017] IP: [<b0358d37>] dev_get_drvdata+0x17/0x20
eeepc kernel: [ 1495.429017] *pde = 00000000
eeepc kernel: [ 1495.429017] Oops: 0000 [#1] DEBUG_PAGEALLOC
eeepc kernel: [ 1495.429017]
eeepc kernel: [ 1495.429017] Pid: 3476, comm: cheese Not tainted 3.1.0-rc3-00270-g7a54f5e1-dirty #485 ASUSTeK Computer INC. 900/900
eeepc kernel: [ 1495.429017] EIP: 0060:[<b0358d37>] EFLAGS: 00010202 CPU: 0
eeepc kernel: [ 1495.429017] EIP is at dev_get_drvdata+0x17/0x20
eeepc kernel: [ 1495.429017] EAX: 6b6b6b6b EBX: eb08d870 ECX: 00000000 EDX: eb08d930
eeepc kernel: [ 1495.429017] ESI: eb08d870 EDI: eb08d870 EBP: d3249cac ESP: d3249cac
eeepc kernel: [ 1495.429017]  DS: 007b ES: 007b FS: 0000 GS: 00e0 SS: 0068
eeepc kernel: [ 1495.429017] Process cheese (pid: 3476, ti=d3248000 task=df46d870 task.ti=d3248000)
eeepc kernel: [ 1495.429017] Stack:
eeepc kernel: [ 1495.429017]  d3249cb8 b03e77a1 d307b840 d3249ccc b03e77d1 d307b840 eb08d870 eb08d830
eeepc kernel: [ 1495.429017]  d3249ce4 b03ed3b7 00000246 d307b840 eb08d870 d3021b80 d3249cec b03ed565
eeepc kernel: [ 1495.429017]  d3249cfc b03e044d e8323d10 b06e013c d3249d18 b0355fb9 fffffffe d3249d1c
eeepc kernel: [ 1495.429017] Call Trace:
eeepc kernel: [ 1495.429017]  [<b03e77a1>] v4l2_device_disconnect+0x11/0x30
eeepc kernel: [ 1495.429017]  [<b03e77d1>] v4l2_device_unregister+0x11/0x50
eeepc kernel: [ 1495.429017]  [<b03ed3b7>] uvc_delete+0x37/0x110
eeepc kernel: [ 1495.429017]  [<b03ed565>] uvc_release+0x25/0x30
eeepc kernel: [ 1495.429017]  [<b03e044d>] v4l2_device_release+0x9d/0xc0
eeepc kernel: [ 1495.429017]  [<b0355fb9>] device_release+0x19/0x90
eeepc kernel: [ 1495.429017]  [<b03adfdc>] ? usb_hcd_unlink_urb+0x7c/0x90
eeepc kernel: [ 1495.429017]  [<b026b99c>] kobject_release+0x3c/0x90
eeepc kernel: [ 1495.429017]  [<b026b960>] ? kobject_del+0x30/0x30
eeepc kernel: [ 1495.429017]  [<b026ca4c>] kref_put+0x2c/0x60
eeepc kernel: [ 1495.429017]  [<b026b88d>] kobject_put+0x1d/0x50
eeepc kernel: [ 1495.429017]  [<b03b2385>] ? usb_autopm_put_interface+0x25/0x30
eeepc kernel: [ 1495.429017]  [<b03f0e5d>] ? uvc_v4l2_release+0x5d/0xd0
eeepc kernel: [ 1495.429017]  [<b0355d2f>] put_device+0xf/0x20
eeepc kernel: [ 1495.429017]  [<b03dfa96>] v4l2_release+0x56/0x60
eeepc kernel: [ 1495.429017]  [<b019c8dc>] fput+0xcc/0x220
eeepc kernel: [ 1495.429017]  [<b01990f4>] filp_close+0x44/0x70
eeepc kernel: [ 1495.429017]  [<b012b238>] put_files_struct+0x158/0x180
eeepc kernel: [ 1495.429017]  [<b012b100>] ? put_files_struct+0x20/0x180
eeepc kernel: [ 1495.429017]  [<b012b2a0>] exit_files+0x40/0x50
eeepc kernel: [ 1495.429017]  [<b012b9e7>] do_exit+0x5a7/0x660
eeepc kernel: [ 1495.429017]  [<b0135f72>] ? __dequeue_signal+0x12/0x120
eeepc kernel: [ 1495.429017]  [<b055edf2>] ? _raw_spin_unlock_irq+0x22/0x30
eeepc kernel: [ 1495.429017]  [<b012badc>] do_group_exit+0x3c/0xb0
eeepc kernel: [ 1495.429017]  [<b015792b>] ? trace_hardirqs_on+0xb/0x10
eeepc kernel: [ 1495.429017]  [<b013755f>] get_signal_to_deliver+0x18f/0x570
eeepc kernel: [ 1495.429017]  [<b01020f7>] do_signal+0x47/0x9e0
eeepc kernel: [ 1495.429017]  [<b055edf2>] ? _raw_spin_unlock_irq+0x22/0x30
eeepc kernel: [ 1495.429017]  [<b015792b>] ? trace_hardirqs_on+0xb/0x10
eeepc kernel: [ 1495.429017]  [<b0123300>] ? T.1034+0x30/0xc0
eeepc kernel: [ 1495.429017]  [<b055c45f>] ? schedule+0x29f/0x640
eeepc kernel: [ 1495.429017]  [<b0102ac8>] do_notify_resume+0x38/0x40
eeepc kernel: [ 1495.429017]  [<b055f154>] work_notifysig+0x9/0x11
eeepc kernel: [ 1495.429017] Code: e5 5d 83 f8 01 19 c0 f7 d0 83 e0 f0 c3 8d b4 26 00 00 00 00 55 85 c0 89 e5 75 09 31 c0 5d c3 90 8d 74 26 00 8b 40 04 85 c0 74 f0 <8b> 40 60 5d c3 8d 74 26 00 55 89 e5 53 89 c3 83 ec 04 8b 40 04
eeepc kernel: [ 1495.429017] EIP: [<b0358d37>] dev_get_drvdata+0x17/0x20 SS:ESP 0068:d3249cac
eeepc kernel: [ 1495.429017] CR2: 000000006b6b6bcb
eeepc kernel: [ 1495.466975] uvcvideo: Failed to resubmit video URB (-27).
eeepc kernel: [ 1495.467860] uvcvideo: Failed to resubmit video URB (-27).
eeepc kernel: last message repeated 3 times
eeepc kernel: [ 1495.512610] ---[ end trace 73ec16848794e5a5 ]---

For uvc device, dev->vdev.dev is the &intf->dev,
uvc_delete code is as below:
	usb_put_intf(dev->intf);
	usb_put_dev(dev->udev);

	uvc_status_cleanup(dev);
	uvc_ctrl_cleanup_device(dev);

	if (dev->vdev.dev)
		v4l2_device_unregister(&dev->vdev);

Fix it by get_device in v4l2_device_register and put_device in v4l2_device_disconnect
Reported-by: default avatarSitsofe Wheeler <sitsofe@yahoo.com>
Signed-off-by: default avatarDave Young <hidave.darkstar@gmail.com>
Tested-by: default avatarSitsofe Wheeler <sitsofe@yahoo.com>
Acked-by: default avatarLaurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: default avatarMauro Carvalho Chehab <mchehab@redhat.com>
      69803ecf
    • Chris Rankin's avatar
      [media] em28xx: Fix em28xx_devused cleanup logic on error · 9da9f356
      Chris Rankin authored 
      On 04/09/11 00:49, Mauro Carvalho Chehab wrote:
> This is an automatic generated email to let you know that the following patch were queued at the
> http://git.linuxtv.org/media_tree.git tree:
>
> Subject: [media] em28xx: use atomic bit operations for devices-in-use mask
> Author:  Chris Rankin<rankincj@yahoo.com>
> Date:    Sat Aug 20 08:21:03 2011 -0300
>
> Use atomic bit operations for the em28xx_devused mask, to prevent an
> unlikely race condition should two adapters be plugged in
> simultaneously. The operations also clearer than explicit bit
> manipulation anyway.
>
> Signed-off-by: Chris Rankin<rankincj@yahoo.com>
> Signed-off-by: Mauro Carvalho Chehab<mchehab@redhat.com>
>
>   drivers/media/video/em28xx/em28xx-cards.c |   33 ++++++++++++++---------------

I think you missed this line in the merge.
Signed-off-by: default avatarMauro Carvalho Chehab <mchehab@redhat.com>
      9da9f356
    • Thierry Reding's avatar
      [media] tm6000: Enable fast USB quirk on Cinergy Hybrid · 6e896481
      Thierry Reding authored 
      The Cinergy Hybrid cards are known not to need an artificial delay after
USB accesses so the quirk can safely be enabled.
Signed-off-by: default avatarThierry Reding <thierry.reding@avionic-design.de>
Signed-off-by: default avatarMauro Carvalho Chehab <mchehab@redhat.com>
      6e896481
    • Thierry Reding's avatar
      [media] tm6000: Add fast USB access quirk · 42845708
      Thierry Reding authored 
      Some devices support fast access to registers using the USB interface
while others require a certain delay after each operation. This commit
adds a quirk that can be enabled by devices that don't need the delay.
Signed-off-by: default avatarThierry Reding <thierry.reding@avionic-design.de>
Signed-off-by: default avatarMauro Carvalho Chehab <mchehab@redhat.com>
      42845708
    • Laurent Pinchart's avatar
      [media] mt9t001: Aptina (Micron) MT9T001 3MP sensor driver · 0a54b86a
      Laurent Pinchart authored 
      The MT9T001 is a parallel 3MP sensor from Aptina (formerly Micron)
controlled through I2C.

The driver creates a V4L2 subdevice. It currently supports binning and
cropping, and the gain, exposure, test pattern and black level controls.
Signed-off-by: default avatarLaurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: default avatarMauro Carvalho Chehab <mchehab@redhat.com>
      0a54b86a
    • Laurent Pinchart's avatar
      [media] omap3isp: video: Avoid crashes when pipeline set stream operation fails · 5b6c3ef0
      Laurent Pinchart authored 
      If streaming can't be enabled on the pipeline, the DMA buffers queue is
not emptied. If the buffers then get freed the queue will end up
referencing free memory. This is usually not an issue, as the DMA queue
will be reinitialized the next time streaming is enabled, before
enabling the hardware.

However, if the sensor connected at the pipeline input is free-running,
the CCDC will start generating interrupts as soon as it gets powered up,
before the streaming gets enabled on the hardware. This will make the
CCDC interrupt handler access freed memory, causing a crash.

Reinitialize the DMA buffers queue in isp_video_streamon() if the error
path to make sure this situation won't happen.
Signed-off-by: default avatarLaurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: default avatarMauro Carvalho Chehab <mchehab@redhat.com>
      5b6c3ef0
    • Laurent Pinchart's avatar
      [media] omap3isp: Don't fail streamon when the sensor doesn't implement s_stream · c62e2a19
      Laurent Pinchart authored 
      The code handles subdevs with no s_stream operation correctly, but
returns -ENOIOCTLCMD by mistake if the first subdev in the chain has no
s_stream operation. Return 0 in that case.
Signed-off-by: default avatarLaurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: default avatarMauro Carvalho Chehab <mchehab@redhat.com>
      c62e2a19
    • Kamil Debski's avatar
      [media] media: s5p-mfc: fix section mismatch · 1e393e90
      Kamil Debski authored 
      Fix section mismatch in the MFC driver.
Reported-by: default avatarMarek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: default avatarKamil Debski <k.debski@samsung.com>
Signed-off-by: default avatarKyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: default avatarMauro Carvalho Chehab <mchehab@redhat.com>
      1e393e90
    • Randy Dunlap's avatar
      [media] [-mmotm] media: video/adp1653.c needs module.h · ae11e354
      Randy Dunlap authored 
      adp1653.c uses interfaces that are provided by <linux/module.h>
and needs to include that header file to fix build errors.

and more.
Signed-off-by: default avatarRandy Dunlap <rdunlap@xenotime.net>
Signed-off-by: default avatarMauro Carvalho Chehab <mchehab@redhat.com>
      ae11e354
GitLab Nexedi Edition | About GitLab | About Nexedi | 沪ICP备2021021310号-2 | 沪ICP备2021021310号-7