The only work left in the kthread is the periodic health check for each
controller.  There is no need to run this from process context or keep
a thread context around for it, so replace it with a simpler timer.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Keith Busch <keith.busch@intel.com>
Reviewed-by: Sagi Grimberg <sagig@mellanox.com>
Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de>
Signed-off-by: Jens Axboe <axboe@fb.com>

There is no reason to do unconditional polling of CQs per the NVMe
spec.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Keith Busch <keith.busch@intel.com>
Reviewed-by: Sagi Grimberg <sagig@mellanox.com>
Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de>
Signed-off-by: Jens Axboe <axboe@fb.com>

Use a dedicated work item to submit async event requests instead of the
global kthread.  This simplifies the code and reduces the latencies to
resubmit a request once an even notification happened.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Keith Busch <keith.busch@intel.com>
Reviewed-by: Sagi Grimberg <sagig@mellanox.com>
Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de>
Signed-off-by: Jens Axboe <axboe@fb.com>

NVMe over Fabrics drivers are going to reuse the core,
so splits nvme.ko into 2 modules:

nvme-core.ko: the core part
nvme.ko: the PCI driver

Export symbols from nvme-core.ko.
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Ming Lin <ming.l@ssi.samsung.com>
Signed-off-by: Jens Axboe <axboe@fb.com>

Split dev_list_lock into one in the core and one in the PCI driver.
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de>
Reviewed-by: Sagi Grimberg <sagig@mellanox.com>
Signed-off-by: Ming Lin <ming.l@ssi.samsung.com>
Signed-off-by: Jens Axboe <axboe@fb.com>

These variables are used by PCI driver and will also be used in the
forthcoming NVMe over Fabrics drivers.
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de>
Reviewed-by: Sagi Grimberg <sagig@mellanox.com>
Signed-off-by: Ming Lin <ming.l@ssi.samsung.com>
Signed-off-by: Jens Axboe <axboe@fb.com>

We don't want to be able to unload the fabric driver when we have
openened referenced to our namespaces. Thus, for each nvme_open we
take a reference on the fabric driver and put it in nvme_release.
This behavior is consistent with the scsi model.

This resolves the panic when unloading a fabric module with
mpath holders.
Signed-off-by: Sagi Grimberg <sagig@mellanox.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Ian Bakshan <ianb@mellanox.com>
Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de>
Signed-off-by: Ming Lin <ming.l@ssi.samsung.com>
Signed-off-by: Jens Axboe <axboe@fb.com>

Having the ctrl name "nvmeX" seems much more friendly than
the underlying device name. Also, with other nvme transports
such as the soon to come nvme-loop we don't have an underlying
device so it doesn't makes sense to make up one.

In order to help matching an instance name to a pci function,
we add a info print in nvme_probe.
Signed-off-by: Sagi Grimberg <sagig@mellanox.com>
Acked-by: Keith Busch <keith.busch@intel.com>

Manually fixed up the hunk in nvme_cancel_queue_ios().
Signed-off-by: Jens Axboe <axboe@fb.com>

Pass the right private data to device_create_with_groups from the
beginning, and remove the superflous call to dev_set_drvdata.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Jon Derrick <jonathan.derrick@intel.com>
Signed-off-by: Jens Axboe <axboe@fb.com>

This notifies blk-mq when the tag set contains a different number of
queues prior to freeing unused ones that the request queue points to.
Signed-off-by: Keith Busch <keith.busch@intel.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@fb.com>

The hardware's provided queue count may change at runtime with resource
provisioning. This patch allows a block driver to alter the number of
h/w queues available when its resource count changes.

The main part is a new blk-mq API to request a new number of h/w queues
for a given live tag set. The new API freezes all queues using that set,
then adjusts the allocated count prior to remapping these to CPUs.

The bulk of the rest just shifts where h/w contexts and all their
artifacts are allocated and freed.

The number of max h/w contexts is capped to the number of possible cpus
since there is no use for more than that. As such, all pre-allocated
memory for pointers need to account for the max possible rather than
the initial number of queues.

A side effect of this is that the blk-mq will proceed successfully as
long as it can allocate at least one h/w context. Previously it would
fail request queue initialization if less than the requested number
was allocated.
Signed-off-by: Keith Busch <keith.busch@intel.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Tested-by: Jon Derrick <jonathan.derrick@intel.com>
Signed-off-by: Jens Axboe <axboe@fb.com>

Currently we don't allow sync workload of one cgroup to preempt sync
workload of any other cgroup. This is because we want to achieve service
separation between cgroups. However in cases where cgroup preempting is
ancestor of the current cgroup, there is no need of separation and
idling introduces unnecessary overhead. This hurts for example the case
when workload is isolated within a cgroup but journalling threads are in
root cgroup. Simple way to demostrate the issue is using:

dbench4 -c /usr/share/dbench4/client.txt -t 10 -D /mnt 1

on ext4 filesystem on plain SATA drive (mounted with barrier=0 to make
difference more visible). When all processes are in the root cgroup,
reported throughput is 153.132 MB/sec. When dbench process gets its own
blkio cgroup, reported throughput drops to 26.1006 MB/sec.

Fix the problem by making check in cfq_should_preempt() more benevolent
and allow preemption by ancestor cgroup. This improves the throughput
reported by dbench4 to 48.9106 MB/sec.
Acked-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Jan Kara <jack@suse.com>
Signed-off-by: Jens Axboe <axboe@fb.com>

The original idea with preemption of sync noidle queues (introduced in
commit 718eee05 "cfq-iosched: fairness for sync no-idle queues") was
that we service all sync noidle queues together, we don't idle on any of
the queues individually and we idle only if there is no sync noidle
queue to be served. This intention also matches the original test:

	if (cfqd->serving_type == SYNC_NOIDLE_WORKLOAD
	   && new_cfqq->service_tree == cfqq->service_tree)
		return true;

However since at that time cfqq->service_tree was not set for idling
queues, this test was unreliable and was replaced in commit e4a22919
"cfq-iosched: fix no-idle preemption logic" by:

	if (cfqd->serving_type == SYNC_NOIDLE_WORKLOAD &&
	    cfqq_type(new_cfqq) == SYNC_NOIDLE_WORKLOAD &&
	    new_cfqq->service_tree->count == 1)
		return true;

That was a reliable test but was actually doing something different -
now we preempt sync noidle queue only if the new queue is the only one
busy in the service tree.

These days cfq queue is kept in service tree even if it is idling and
thus the original check would be safe again. But since we actually check
that cfq queues are in the same cgroup, of the same priority class and
workload type (sync noidle), we know that new_cfqq is fine to preempt
cfqq. So just remove the service tree check.
Acked-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Jan Kara <jack@suse.com>
Signed-off-by: Jens Axboe <axboe@fb.com>

Move check for preemption by rt class up. There is no functional change
but it makes arguing about conditions simpler since we can be sure both
cfq queues are from the same ioprio class.
Acked-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Jan Kara <jack@suse.com>
Signed-off-by: Jens Axboe <axboe@fb.com>

There is no point in idling on a cfq group if the only cfq queue that is
there has too big thinktime.
Signed-off-by: Jan Kara <jack@suse.com>
Acked-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Jens Axboe <axboe@fb.com>

Pull USB driver fixes from Greg KH:
 "Here are some small USB fixes and new device ids for 4.5-rc2.  Nothing
  major here, full details are in the shortlog, and all of these have
  been in linux-next successfully"

* tag 'usb-4.5-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb:
  USB: option: fix Cinterion AHxx enumeration
  USB: mxu11x0: fix memory leak on usb_serial private data
  USB: serial: ftdi_sio: add support for Yaesu SCU-18 cable
  USB: serial: option: Adding support for Telit LE922
  USB: serial: visor: fix crash on detecting device without write_urbs
  USB: visor: fix null-deref at probe
  USB: cp210x: add ID for IAI USB to RS485 adaptor
  usb: hub: do not clear BOS field during reset device
  cdc-acm:exclude Samsung phone 04e8:685d
  usb: cdc-acm: send zero packet for intel 7260 modem
  usb: cdc-acm: handle unlinked urb in acm read callback

Pull tty/serial fixes from Greg KH:
 "Here are some small tty/serial driver fixes for 4.5-rc2.

  They resolve a number of reported problems (the ioctl one specifically
  has been pointed out by numerous people) and one patch adds some new
  device ids for the 8250_pci driver.  All have been in linux-next
  successfully"

* tag 'tty-4.5-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty:
  serial: 8250_pci: Add Intel Broadwell ports
  staging/speakup: Use tty_ldisc_ref() for paste kworker
  n_tty: Fix unsafe reference to "other" ldisc
  tty: Fix unsafe ldisc reference via ioctl(TIOCGETD)
  tty: Retry failed reopen if tty teardown in-progress
  tty: Wait interruptibly for tty lock on reopen

Pull staging fixes from Greg KH:
 "Here are some small staging driver fixes for 4.5-rc2.

  One of them predated 4.4-final, but I missed that merge window due to
  the holliday.  The others fix reported issues that have come up
  recently.  The tty change is needed for the speakup driver fix and has
  the ack of the tty driver maintainer as well, i.e.  myself :)

  All have been in linux-next with no reported issues"

* tag 'staging-4.5-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging:
  Staging: speakup: fix read scrolled-back VT
  Staging: speakup: Fix getting port information
  Revert "Staging: panel: usleep_range is preferred over udelay"
  iio: adis_buffer: Fix out-of-bounds memory access

Pull driver core fix from Greg KH:
 "Here's a single driver core fix that resolves an issue a lot of users
  have been hitting for a while now.  It's been tested a lot and has
  been in linux-next successfully for a while"

* tag 'driver-core-4.5-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core:
  base/platform: Fix platform drivers with no probe callback

Pull MIPS fix from Ralf Baechle:
 "Just a single revert for a patch which I had upstreamed out of
  sequence"

* 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus:
  Revert "MIPS: bcm63xx: nvram: Remove unused bcm63xx_nvram_get_psi_size() function"

Pull x86 fixes from Thomas Gleixner:
 "A bit on the largish side due to a series of fixes for a regression in
  the x86 vector management which was introduced in 4.3.  This work was
  started in December already, but it took some time to fix all corner
  cases and a couple of older bugs in that area which were detected
  while at it

  Aside of that a few platform updates for intel-mid, quark and UV and
  two fixes for in the mm code:
   - Use proper types for pgprot values to avoid truncation
   - Prevent a size truncation in the pageattr code when setting page
     attributes for large mappings"

* 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (21 commits)
  x86/mm/pat: Avoid truncation when converting cpa->numpages to address
  x86/mm: Fix types used in pgprot cacheability flags translations
  x86/platform/quark: Print boundaries correctly
  x86/platform/UV: Remove EFI memmap quirk for UV2+
  x86/platform/intel-mid: Join string and fix SoC name
  x86/platform/intel-mid: Enable 64-bit build
  x86/irq: Plug vector cleanup race
  x86/irq: Call irq_force_move_complete with irq descriptor
  x86/irq: Remove outgoing CPU from vector cleanup mask
  x86/irq: Remove the cpumask allocation from send_cleanup_vector()
  x86/irq: Clear move_in_progress before sending cleanup IPI
  x86/irq: Remove offline cpus from vector cleanup
  x86/irq: Get rid of code duplication
  x86/irq: Copy vectormask instead of an AND operation
  x86/irq: Check vector allocation early
  x86/irq: Reorganize the search in assign_irq_vector
  x86/irq: Reorganize the return path in assign_irq_vector
  x86/irq: Do not use apic_chip_data.old_domain as temporary buffer
  x86/irq: Validate that irq descriptor is still active
  x86/irq: Fix a race in x86_vector_free_irqs()
  ...

Pull timer fixes from Thomas Gleixner:
 "The timer departement delivers:

   - a regression fix for the NTP code along with a proper selftest
   - prevent a spurious timer interrupt in the NOHZ lowres code
   - a fix for user space interfaces returning the remaining time on
     architectures with CONFIG_TIME_LOW_RES=y
   - a few patches to fix COMPILE_TEST fallout"

* 'timers-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  tick/nohz: Set the correct expiry when switching to nohz/lowres mode
  clocksource: Fix dependencies for archs w/o HAS_IOMEM
  clocksource: Select CLKSRC_MMIO where needed
  tick/sched: Hide unused oneshot timer code
  kselftests: timers: Add adjtimex SETOFFSET validity tests
  ntp: Fix ADJ_SETOFFSET being used w/ ADJ_NANO
  itimers: Handle relative timers with CONFIG_TIME_LOW_RES proper
  posix-timers: Handle relative timers with CONFIG_TIME_LOW_RES proper
  timerfd: Handle relative timers with CONFIG_TIME_LOW_RES proper
  hrtimer: Handle remaining time proper for TIME_LOW_RES
  clockevents/tcb_clksrc: Prevent disabling an already disabled clock

Pull scheduler fixes from Thomas Gleixner:
 "Three small fixes in the scheduler/core:

   - use after free in the numa code
   - crash in the numa init code
   - a simple spelling fix"

* 'sched-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  pid: Fix spelling in comments
  sched/numa: Fix use-after-free bug in the task_numa_compare
  sched: Fix crash in sched_init_numa()

Pull perf fixes from Thomas Gleixner:
 "This is much bigger than typical fixes, but Peter found a category of
  races that spurred more fixes and more debugging enhancements.  Work
  started before the merge window, but got finished only now.

  Aside of that this contains the usual small fixes to perf and tools.
  Nothing particular exciting"

* 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (43 commits)
  perf: Remove/simplify lockdep annotation
  perf: Synchronously clean up child events
  perf: Untangle 'owner' confusion
  perf: Add flags argument to perf_remove_from_context()
  perf: Clean up sync_child_event()
  perf: Robustify event->owner usage and SMP ordering
  perf: Fix STATE_EXIT usage
  perf: Update locking order
  perf: Remove __free_event()
  perf/bpf: Convert perf_event_array to use struct file
  perf: Fix NULL deref
  perf/x86: De-obfuscate code
  perf/x86: Fix uninitialized value usage
  perf: Fix race in perf_event_exit_task_context()
  perf: Fix orphan hole
  perf stat: Do not clean event's private stats
  perf hists: Fix HISTC_MEM_DCACHELINE width setting
  perf annotate browser: Fix behaviour of Shift-Tab with nothing focussed
  perf tests: Remove wrong semicolon in while loop in CQM test
  perf: Synchronously free aux pages in case of allocation failure
  ...

Pull locking fix from Thomas Gleixner:
 "A single commit, which makes the rtmutex.wait_lock an irq safe lock.

  This prevents a potential deadlock which can be triggered by the rcu
  boosting code from rcu_read_unlock()"

* 'locking-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  rtmutex: Make wait_lock irq safe

Pull IRQ fixes from Ingo Molnar:
 "Mostly irqchip driver fixes, but also an irq core crash fix and a
  build fix"

* 'irq-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  irqchip/mxs: Add missing set_handle_irq()
  irqchip/atmel-aic: Fix wrong bit operation for IRQ priority
  irqchip/gic-v3-its: Recompute the number of pages on page size change
  base: Export platform_msi_domain_[alloc,free]_irqs
  of: MSI: Simplify irqdomain lookup
  irqdomain: Allow domain lookup with DOMAIN_BUS_WIRED token
  irqchip: Fix dependencies for archs w/o HAS_IOMEM
  irqchip/s3c24xx: Mark init_eint as __maybe_unused
  genirq: Validate action before dereferencing it in handle_irq_event_percpu()

Pull debugobjects fix from Ingo Molnar:
 "Bump up debugobjects pool limit that bigger s390 systems kept running
  into"

* 'core-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  debugobjects: Allow bigger number of early boot objects

Pull VFIO fix from Alex Williamson:
 "Use alternate group tracking for no-iommu"

* tag 'vfio-v4.5-rc2' of git://github.com/awilliam/linux-vfio:
  vfio/noiommu: Don't use iommu_present() to track fake groups

Pull i2c fixes from Wolfram Sang:
 "Here are two I2C driver regression fixes.  piix4 gets a larger
  overhaul fixing the latest refactoring and also an older known issue
  as well.  designware-pci gets a fix for a bad merge conflict
  resolution"

* 'i2c/for-current' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux:
  i2c: piix4: don't regress on bus names
  i2c: designware-pci: use IRQF_COND_SUSPEND flag
  i2c: piix4: Fully initialize SB800 before it is registered
  i2c: piix4: Fix SB800 locking

Accidentally discovered this typo when I studied this module.
Signed-off-by: Zhen Lei <thunder.leizhen@huawei.com>
Cc: Hanjun Guo <guohanjun@huawei.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Tianhong Ding <dingtianhong@huawei.com>
Cc: Xinwei Hu <huxinwei@huawei.com>
Cc: Zefan Li <lizefan@huawei.com>
Link: http://lkml.kernel.org/r/1454119457-11272-1-git-send-email-thunder.leizhen@huawei.comSigned-off-by: Ingo Molnar <mingo@kernel.org>

Merge tag 'perf-urgent-for-mingo' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux into perf/urgent

Pull perf/urgent fixes from Arnaldo Carvalho de Melo:

 - Fix 'perf stat' stddev reporting due to mistakenly cleaning event
   private stats (Jiri Olsa)

 - Fix 'perf test CQM' endless loop detected by 'gcc6 -Wmisleading-indentation'
   (Markus Trippelsdorf)

 - Fix behaviour of Shift-Tab when nothing is focussed in the annotate TUI browser,
   detected with gcc6 -Wmisleading-indentation (Markus Trippelsdorf)

 - Fix mem data cacheline hists browser width setting for unresolved
   addresses (Jiri Olsa)
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>

Pull ARM fixes from Russell King:
 "Just one fix for a -fstack-protector-strong problem from Kees Cook,
  and adding the new copy_file_range syscall"

* 'fixes' of git://ftp.arm.linux.org.uk/~rmk/linux-arm:
  ARM: wire up copy_file_range() syscall
  ARM: 8500/1: fix atags_to_fdt with stack-protector-strong

Pull powerpc fixes from Michael Ellerman:
 - Wire up copy_file_range() syscall from Chandan Rajendra
 - Simplify module TOC handling from Alan Modra
 - Remove newly added extra definition of pmd_dirty from Stephen Rothwell
 - Allow user space to map rtas_rmo_buf from Vasant Hegde
 - Fix PE location code from Gavin Shan
 - Remove PPMU_HAS_SSLOT flag for Power8 from Madhavan Srinivasan
 - Fixup _HPAGE_CHG_MASK from Aneesh Kumar K.V

* tag 'powerpc-4.5-2' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
  powerpc/mm: Fixup _HPAGE_CHG_MASK
  powerpc/perf: Remove PPMU_HAS_SSLOT flag for Power8
  powerpc/eeh: Fix PE location code
  powerpc/mm: Allow user space to map rtas_rmo_buf
  powerpc: Remove newly added extra definition of pmd_dirty
  powerpc: Simplify module TOC handling
  powerpc: Wire up copy_file_range() syscall

Pull s390 updates from Martin Schwidefsky:
 "An optimization for irq-restore, the SSM instruction is quite a bit
  slower than an if-statement and a STOSM.

  The copy_file_range system all is added.

  Cleanup for PCI and CIO.

  And a couple of bug fixes"

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux:
  s390/cio: update measurement characteristics
  s390/cio: ensure consistent measurement state
  s390/cio: fix measurement characteristics memleak
  s390/zcrypt: Fix cryptographic device id in kernel messages
  s390/pci: remove iomap sanity checks
  s390/pci: set error state for unusable functions
  s390/pci: fix bar check
  s390/pci: resize iomap
  s390/pci: improve ZPCI_* macros
  s390/pci: provide ZPCI_ADDR macro
  s390/pci: adjust IOMAP_MAX_ENTRIES
  s390/numa: move numa_init_late() from device to arch_initcall
  s390: remove all usages of PSW_ADDR_INSN
  s390: remove all usages of PSW_ADDR_AMODE
  s390: wire up copy_file_range syscall
  s390: remove superfluous memblock_alloc() return value checks
  s390/numa: allocate memory with correct alignment
  s390/irqflags: optimize irq restore
  s390/mm: use TASK_MAX_SIZE where applicable

Pull btrfs fixes from Chris Mason:
 "Dave had a small collection of fixes to the new free space tree code,
  one of which was keeping our sysfs files more up to date with feature
  bits as different things get enabled (lzo, raid5/6, etc).

  I should have kept the sysfs stuff for rc3, since we always manage to
  trip over something.  This time it was GFP_KERNEL from somewhere that
  is NOFS only.  Instead of rebasing it out I've put a revert in, and
  we'll fix it properly for rc3.

  Otherwise, Filipe fixed a btrfs DIO race and Qu Wenruo fixed up a
  use-after-free in our tracepoints that Dave Jones reported"

* 'for-linus-4.5' of git://git.kernel.org/pub/scm/linux/kernel/git/mason/linux-btrfs:
  Revert "btrfs: synchronize incompat feature bits with sysfs files"
  btrfs: don't use GFP_HIGHMEM for free-space-tree bitmap kzalloc
  btrfs: sysfs: check initialization state before updating features
  Revert "btrfs: clear PF_NOFREEZE in cleaner_kthread()"
  btrfs: async-thread: Fix a use-after-free error for trace
  Btrfs: fix race between fsync and lockless direct IO writes
  btrfs: add free space tree to the cow-only list
  btrfs: add free space tree to lockdep classes
  btrfs: tweak free space tree bitmap allocation
  btrfs: tests: switch to GFP_KERNEL
  btrfs: synchronize incompat feature bits with sysfs files
  btrfs: sysfs: introduce helper for syncing bits with sysfs files
  btrfs: sysfs: add free-space-tree bit attribute
  btrfs: sysfs: fix typo in compat_ro attribute definition

Pull power management and ACPI fixes from Rafael Wysocki:
 "These are: cpuidle fixes (including one fix for a recent regression),
  cpufreq fixes (including fixes for two issues introduced during the
  4.2 cycle), generic power domains framework fixes (two locking fixes
  and one cleanup), one locking fix in the ACPI-based PCI hotplug
  framework (ACPIPHP), removal of one ACPI backlight blacklist entry
  that isn't necessary any more and a PM Kconfig cleanup.

  Specifics:

   - Fix a recent cpuidle core regression that broke suspend-to-idle on
     all systems where cpuidle drivers don't provide ->enter_freeze
     callbacks for any states (Sudeep Holla).

   - Drop an unnecessary symbol definition from the cpuidle core code
     handling coupled CPU cores (Anders Roxell).

   - Fix a race condition related to governor initialization and removal
     in the cpufreq core (Viresh Kumar).

   - Clean up the cpufreq core to use list_is_last() for checking if the
     given policy object is the last element of a list instead of open
     coding that in a clumsy way (Gautham R Shenoy).

   - Fix compiler warnings in the pxa2xx and cpufreq-dt cpufreq drivers
     (Arnd Bergmann).

   - Fix two locking issues and clean up a comment in the generic power
     domains framework (Ulf Hansson, Marek Szyprowski, Moritz Fischer).

   - Fix the error code path of one function in the ACPI-based PCI
     hotplug framework (ACPIPHP) that forgets to release a lock acquired
     previously (Insu Yun).

   - Drop the ACPI backlight blacklist entry for Dell Inspiron 5737 that
     is not necessary any more (Hans de Goede).

   - Clean up the top-level PM Kconfig to stop requiring APM emulation
     to depend on PM which in fact isn't necessary (Arnd Bergmann)"

* tag 'pm+acpi-4.5-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
  cpufreq: cpufreq-dt: avoid uninitialized variable warnings:
  cpufreq: pxa2xx: fix pxa_cpufreq_change_voltage prototype
  PM: APM_EMULATION does not depend on PM
  cpufreq: Use list_is_last() to check last entry of the policy list
  cpufreq: Fix NULL reference crash while accessing policy->governor_data
  cpuidle: coupled: remove unused define cpuidle_coupled_lock
  PM / Domains: Fix typo in comment
  PM / Domains: Fix potential deadlock while adding/removing subdomains
  ACPI / PCI / hotplug: unlock in error path in acpiphp_enable_slot()
  ACPI: Revert "ACPI / video: Add Dell Inspiron 5737 to the blacklist"
  cpuidle: fix fallback mechanism for suspend to idle in absence of enter_freeze
  PM / domains: fix lockdep issue for all subdomains

Pull swiotlb patchlet from Konrad Rzeszutek Wilk:
 "One trivial patch.

  Another patch (from Fengguang) is already in your tree courtesy of
  Andrew Morton - but I would prefer not to rebase my tree.  Hence the
  diff is very small"

* 'stable/for-linus-4.5' of git://git.kernel.org/pub/scm/linux/kernel/git/konrad/swiotlb:
  swiotlb: Make linux/swiotlb.h standalone includible
  MAINTAINERS: add git URL for swiotlb

Pull cleancache cleanups from Konrad Rzeszutek Wilk:
 "Simple cleanups"

* 'stable/for-linus-4.5' of git://git.kernel.org/pub/scm/linux/kernel/git/konrad/mm:
  include/linux/cleancache.h: Clean up code
  cleancache: constify cleancache_ops structure

Pull IOMMU fixes from Joerg Roedel:
 "Five patches queued up:

   - Two patches for the AMD and Intel IOMMU drivers to fix alias
     handling and ATS handling.

   - Fix build error with arm io-pgtable code

   - Two documentation fixes"

* tag 'iommu-fixes-v4.5-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu:
  iommu: Update struct iommu_ops comments
  iommu/vt-d: Fix link to Intel IOMMU Specification
  iommu/amd: Correct the wrong setting of alias DTE in do_attach
  iommu/vt-d: Don't skip PCI devices when disabling IOTLB
  iommu/io-pgtable-arm: Fix io-pgtable-arm build failure