- 10 Jun, 2004 1 commit
-
-
Dmitry Torokhov authored
Do not add numeric suffix to platform device name if device id is set to -1. This can be used when there can be only one instance of a device (like i8042). Signed-off-by: Dmitry Torokhov <dtor@mail.ru> Signed-off-by: Greg Kroah-Hartman <greg@kroah.com>
-
- 09 Jun, 2004 2 commits
-
-
Andrew Morton authored
with gcc-2.95: drivers/i2c/chips/w83627hf.c:482: parse error before `static' drivers/i2c/chips/w83627hf.c:502: parse error before `static' drivers/i2c/chips/w83627hf.c: In function `show_regs_fan_1': drivers/i2c/chips/w83627hf.c:541: warning: implicit declaration of function `show_fan' drivers/i2c/chips/w83627hf.c: In function `w83627hf_detect': drivers/i2c/chips/w83627hf.c:1074: `dev_attr_in0_min' undeclared (first use in this function) drivers/i2c/chips/w83627hf.c:1074: (Each undeclared identifier is reported only once drivers/i2c/chips/w83627hf.c:1074: for each function it appears in.) drivers/i2c/chips/w83627hf.c: At top level: drivers/i2c/chips/w83627hf.c:428: warning: `show_regs_in_min0' defined but not used drivers/i2c/chips/w83627hf.c:441: warning: `store_regs_in_min0' defined but not used Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Greg Kroah-Hartman <greg@kroah.com>
-
Greg Kroah-Hartman authored
-
- 08 Jun, 2004 19 commits
-
-
Greg Kroah-Hartman authored
Signed-off-by: Greg Kroah-Hartman <greg@kroah.com>
-
Russell King authored
This patch adds management of platform device resources to the device model, allowing drivers to lookup resources, IRQs and DMA numbers in the platform device resource array. We also add a couple of functions which allow platform devices and their resources to be registered. Signed-off-by: Russell King <rmk@arm.linux.org.uk> Signed-off-by: Greg Kroah-Hartman <greg@kroah.com>
-
Hanna V. Linder authored
Here is the patch that uses a cpu hotplug callback, to allow dynamic support of cpu id for classes in sysfs. This patch applies on top of the one I sent out earlier that Greg included. I do not have access to hardware that supports cpu hotswapping (virtually or not) so have not been able to test that aspect of the patch. However, the original functionality of listing static cpu's still works. Please consider for testing or inclusion. Signed-off-by: Hanna Linder <hannal@us.ibm.com> Signed-off-by: Greg Kroah-Hartman <greg@kroah.com>
-
Greg Kroah-Hartman authored
into kroah.com:/home/greg/linux/BK/i2c-2.6
-
Jonas Munsin authored
Attached is a cleanup patch for the it87 sensor driver, against 2.6.7-rc2. Jean Delvare has reviewed it. Signed-off-by: Greg Kroah-Hartman <greg@kroah.com>
-
Mark M. Hoffman authored
This patch adds support for the alternate in0/VCORE calculation which is available for 2 of 4 chips this driver supports. It also fixes a minor bug in the standard voltage input calculation. Signed-off-by: Greg Kroah-Hartman <greg@kroah.com>
-
David Howells authored
Stop downgrade_write() from under-adjusting the rwsem counter in optimised rw-semaphores. Signed-off-by: David Howells <dhowells@redhat.com> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
-
bk://gkernel.bkbits.net/net-drivers-2.6Linus Torvalds authored
into evo.osdl.org:/home/torvalds/v2.6/linux
-
Jesse Brandeburg authored
Signed off by: Jesse Brandeburg
-
Andrew Morton authored
From: Carl-Daniel Hailfinger <c-d.hailfinger.kernel.2004@gmx.net> Handle going-away devices.
-
Herbert Xu authored
This patch fixes an incorrect MCA check as well as a leak on probe failure in at1700.
-
Herbert Xu authored
This patch frees the netdev on failure in mc32_probe in 3c527.
-
Alan Cox authored
"Gee it works better if you turn the chip on before programming it" The ioctl to ethtool change broke that little detail... I made the changes, Jeff agreed in principle, Red Hat owns them and I know no reason they can't be contributed under the GPL v2 or later. Requires: ethtool change
-
Alan Cox authored
Several ethernet drivers have been broken by the ethtool support because the ioctl code used to power the interface up and down as needed. Rather than add this to each driver call Jeff Garzik suggested we add hooks for before/after ethtool processing. This patch implements them which makes fixing the PM stuff easier, as the epic100 patch to follow will show. It also cleans up the via-velocity driver pm/ethtool logic a great deal. As per Jeff's request the before handler is allowed to fail the operation. -- The contribution herein included is a creation of Red Hat Inc. It is hereby submitted under the license of the existing files and as a derivative work thereof. I know of no reason for not having the right to submit the work herein included. (Bluff your way in legalese ;))
-
Michael Hunold authored
Adrian Bunk noticed that the tda1004x DVB frontend driver was broken and sent a small patch that at least made the driver work again. There was a discussion afterwards about the kernel syscall interface, but at the end, the tda1004x DVB frontend driver is still non-functional. This re-applies the temporary band-aid.
-
Paul Mackerras authored
The paca struct contains a pointer to the current task, which is used for the `current' macro. For some reason, this field is a u64, and every time we use it we need a cast, because it is really a pointer. This patch cleans things up a little by making it a pointer to struct task_struct and removing the casts. It also removes a now-incorrect comment which said that r13 contains current (it now holds &paca[smp_processor_id()]). Signed-off-by: Paul Mackerras <paulus@samba.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
-
Paul Mackerras authored
Occasionally the ppc64 kernel emulates a usermode instruction, for example in the alignment exception handler. Kumar Gala pointed out (in the context of the ppc32 kernel) that if the instruction was being single-stepped, and we end up emulating the instruction, we should then send the process a SIGTRAP as if it had not been emulated and the process had then taken a single-step exception. This patch implements this for ppc64. Signed-off-by: Paul Mackerras <paulus@samba.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
-
bk://kernel.bkbits.net/davem/net-2.6Linus Torvalds authored
into evo.osdl.org:/home/torvalds/v2.6/linux
-
bk://kernel.bkbits.net/gregkh/linux/usb-fix-2.6Linus Torvalds authored
into evo.osdl.org:/home/torvalds/v2.6/linux
-
- 07 Jun, 2004 12 commits
-
-
David S. Miller authored
into kernel.bkbits.net:/home/davem/net-2.6
-
David S. Miller authored
-
Stephen Hemminger authored
-
Stephen Hemminger authored
-
Duncan Sands authored
proc_resetdevice is called with dev->serialize held. usb_reset_device takes dev->serialize and then calls __usb_reset_device. To avoid deadlock, proc_resetdevice should call __usb_reset_device directly. Signed-off-by: Duncan Sands <baldrick@free.fr> Signed-off-by: Greg Kroah-Hartman <greg@kroah.com>
-
Andrew Morton authored
Updates i386 defconfig. I simply ran `make oldconfig' and selected `m' where it was available, otherwise `y'. Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
-
Andrew Morton authored
Forgot to update the top-level makefile to invoke the new reference_init script. Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
-
Kai Engert authored
The attached patch enables the pwc driver included with kernel 2.6.7-rc2 It also removes the warnings during compilation. However, note that I blindly duplicated the release approach used by other usb camera drivers, replacing the current no-op. The driver works for me with a Logitech QuickCam Notebook Pro and GnomeMeeting. Signed-off-by: Greg Kroah-Hartman <greg@kroah.com>
-
Siegfried Hildebrand authored
> Send me a patch to back those changes out to fix your device and I'll > apply it. If the author is around to realize this, that should wake > them up :) Ok, here you are! :) Attached is a patch for linux-2.6.7-rc2. (though the patch hasn't changed since -rc1) Again a short description: (the patch removes most of the changes done in linux-2.6.2) 1. Removed the local buffer of cyberjack_write, because something goes wrong upon a write-request bigger than the buffer. Without this, a write-request stalls with error -3. 2. Removed some usb_clear_halt() lines. Without this, the device doesn't even open and returns -7. It works for my cyberjack pinpad USB card reader on - nforce2 chipset - VIA KM266 chipset - AMD Irongate chipset Signed-off-by: Greg Kroah-Hartman <greg@kroah.com>
-
Linus Torvalds authored
-
Vojtech Pavlik authored
Signed-off-by: Vojtech Pavlik <vojtech@suse.cz>
-
Vojtech Pavlik authored
into suse.cz:/home/vojtech/bk/for-linus
-
- 06 Jun, 2004 6 commits
-
-
bk://kernel.bkbits.net/davem/sparc-2.6Linus Torvalds authored
into ppc970.osdl.org:/home/torvalds/v2.6/linux
-
David S. Miller authored
into kernel.bkbits.net:/home/davem/net-2.6
-
Jamal Hadi Salim authored
Signed-off-by: Jamal Hadi Salim <hadi@zynx.com> Signed-off-by: David S. Miller <davem@redhat.com>
-
Adam Kropelin authored
When handling FBIOPUTCMAP_SPARC, sbusfb fails to initialize cmap.transp, which quickly leads to an oops when fb_set_cmap() dereferences it. First encountered in Aurora Wombat kernels and seems to afflict mainline as well. Patch is against 2.6.7-rc2. xorg still fails to actually get anything to display on my CG6, but at least it no longer oopses the kernel. Signed-off-by: Adam Kropelin <akropel1@rochester.rr.com> Signed-off-by: David S. Miller <davem@redhat.com>
-
David S. Miller authored
into kernel.bkbits.net:/home/davem/net-2.6
-
David S. Miller authored
-