- 12 Apr, 2017 40 commits
-
-
Ping Cheng authored
[ Upstream commit e7deb157 ] Non-generic devices have numbered_buttons set for both pen and touch interfaces by default. The actual number of buttons on the interface is normally manually decided later, which is different from what those HID generic devices are processed, where number of buttons are directly retrieved from HID descriptors. This patch adds the missed HID_GENERIC check and moves the statement to wacom_setup_pad_input_capabilities since it's not a quirk anymore. Signed-off-by:
Ping Cheng <ping.cheng@wacom.com> Reviewed-by:
Jason Gerecke <jason.gerecke@wacom.com> Signed-off-by:
Jiri Kosina <jkosina@suse.cz> Signed-off-by:
Sasha Levin <alexander.levin@verizon.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Mylène Josserand authored
[ Upstream commit 2ad6f30d ] Some SoCs have a reset line that must be asserted/deasserted. This patch adds a quirk to handle the new compatible "allwinner,sun6i-a31-i2s" which will deassert the reset line on probe function and assert it on remove's one. This new compatible is useful in case of A33 codec driver, for example. Signed-off-by:
Mylène Josserand <mylene.josserand@free-electrons.com> Acked-by:
Maxime Ripard <maxime.ripard@free-electrons.com> Signed-off-by:
Mark Brown <broonie@kernel.org> Signed-off-by:
-
Zhang Rui authored
[ Upstream commit cbc00c13 ] In commit 821d6f03 (ACPI / sleep: Do not save NVS for new machines to accelerate S3), to optimize S3 suspend/resume speed, code is introduced to ignore NVS memory saving during S3 for all the platforms later than 2012. But, Lenovo G50-45, a platform released in 2015, still needs NVS memory saving during S3. A quirk is introduced for this platform. Link: https://bugzilla.kernel.org/show_bug.cgi?id=189431Tested-by:
Przemek <soprwa@gmail.com> Signed-off-by:
Zhang Rui <rui.zhang@intel.com> [ rjw: Drop unnecessary code ] Signed-off-by:
Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by:
-
Pierre-Louis Bossart authored
[ Upstream commit a50477e5 ] The existing code assumes a 19.2 MHz MCLK as the default hardware configuration. This is valid for CherryTrail but not for Baytrail. Add explicit MCLK configuration to set the 19.2 clock on/off depending on DAPM events. This is a prerequisite step to enable devices with Baytrail and RT5645 such as Asus X205TA Signed-off-by:
Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Signed-off-by:
-
Pierre-Louis Bossart authored
[ Upstream commit 42648c22 ] Fix classic issue of having multiple codecs listed in DSDT but a single one actually enabled. The previous code did not handle such errors and could also lead to uninitalized configurations Signed-off-by:
-
Pierre-Louis Bossart authored
[ Upstream commit fd0138dc ] the BIOS reports this codec as RT5640 but it's a rt5670. Use the quirk mechanism to use the cht_bsw_rt5672 machine driver Signed-off-by:
-
Pierre-Louis Bossart authored
[ Upstream commit 93ffeaa8 ] the BIOS incorrectly reports this codec as 5640 but it is really a rt5670 Signed-off-by:
-
Lv Zheng authored
[ Upstream commit 77e9a4aa ] More and more platforms need the button.lid_init_state=open quirk. This patch sets it the default behavior. If a platform doesn't send lid open event or lid open event is lost due to the underlying system problems, then we can compare various combinations: 1. systemd/acpid is used to suspend system or not, systemd has a special logic forcing open event after resuming; 2. _LID returns a cached value or not. The result is as follows: 1. lid_init_state=method 1. cached 1. resumed by lid: (x) event=close (x) systemd=suspends again (x) acpid=suspends again (x) state=close 2. resumed by other: (o) event=close (x) systemd=suspends again (x) acpid=suspends again (o) state=close 2. non-cached 1. resumed by lid: (o) event=open (o) systemd=resumes (o) acpid=resumes (o) state=open 2. resumed by other: (o) event=close (x) systemd=suspends again (x) acpid=suspends again (o) state=close 2. lid_init_state=open 1. cached 1. resumed by lid: (o) event=open (o) systemd=resumes (o) acpid=resumes (x) state=close 2. resumed by other: (x) event=open (o) systemd=resumes (o) acpid=resumes (o) state=close 2. non-cached 1. resumed by lid: (o) event=open (o) systemd=resumes (o) acpid=resumes (o) state=open 2. resumed by other: (x) event=open (o) systemd=resumes (o) acpid=resumes (o) state=close 3. lid_init_state=ignore 1. cached 1. resumed by lid: (o) event=none (x) systemd=suspends again (o) acpid=resumes (x) state=close 2. resumed by other: (o) event=none (x) systemd=suspends again (o) acpid=resumes (o) state=close 2. non-cached 1. resumed by lid: (o) event=none (x) systemd=suspends again (o) acpid=resumes (o) state=open 2. resumed by other: (o) event=none (x) systemd=suspends again (o) acpid=resumes (o) state=close As a conclusion: 1. With systemd changed, lid_init_state=ignore has only one problem and the problem comes from an underlying issue, not userspace and kernel lid handling. 2. Without systemd changed, lid_init_state=open can be the default behavior as the pass ratio is not much worse than lid_init_state=ignore. 3. lid_init_state=method is buggy, we can have a separate patch to make it deprectated. Link: https://bugzilla.kernel.org/show_bug.cgi?id=187271Signed-off-by:
Lv Zheng <lv.zheng@intel.com> Signed-off-by:
-
Bartosz Golaszewski authored
[ Upstream commit f4d435f3 ] There's an issue with the da850 SATA controller: if port multiplier support is compiled in, but we're connecting the drive directly to the SATA port on the board, the drive can't be detected. To make SATA work on the da850-lcdk board: first try to softreset with pmp - if the operation fails with -EBUSY, retry without pmp. Signed-off-by:
Bartosz Golaszewski <bgolaszewski@baylibre.com> Acked-by:
Tejun Heo <tj@kernel.org> Signed-off-by:
Sekhar Nori <nsekhar@ti.com> Signed-off-by:
-
Dan Carpenter authored
[ Upstream commit 1ded56df ] The "port" variable was allocated with devm_kzalloc() so if we free it with kfree() it will be freed twice. Also I changed it to propogate the error from devm_ioremap_resource() instead of returning -ENOMEM. Fixes: c5d46039 ("PCI: Add MCFG quirks for X-Gene host controller") Also-posted-by:
Shawn Lin <shawn.lin@rock-chips.com> Signed-off-by:
Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by:
Bjorn Helgaas <bhelgaas@google.com> Acked-by:
Tanmay Inamdar <tinamdar@apm.com> Signed-off-by:
-
Alex Williamson authored
[ Upstream commit 7184f5b4 ] Intel 200-series chipsets have the same errata as 100-series: the ACS capability doesn't follow the PCIe spec, the capability and control registers are dwords rather than words. Add PCIe root port device IDs to existing quirk. Signed-off-by:
Alex Williamson <alex.williamson@redhat.com> Signed-off-by:
-
Daniel Vetter authored
[ Upstream commit 858b2c1b ] It's only for a device quirk, and we might as well do that in the load callback. Acked-by:
Alex Deucher <alexander.deucher@amd.com> Signed-off-by:
Daniel Vetter <daniel.vetter@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/20170125062657.19270-10-daniel.vetter@ffwll.chSigned-off-by:
-
Felipe Balbi authored
[ Upstream commit e42a5dbb ] dwc3 revisions <=3.00a have a limitation where Port Disable command doesn't work. Set the quirk-broken-port-ped property for such controllers so XHCI core can do the necessary workaround. [rogerq@ti.com] Updated code from platform data to device property. Signed-off-by:
Roger Quadros <rogerq@ti.com> Signed-off-by:
Felipe Balbi <felipe.balbi@linux.intel.com> Signed-off-by:
-
Felipe Balbi authored
[ Upstream commit 21939f00 ] In case 'quirk-broken-port-ped' property is passed in via device property, we should enable the corresponding BROKEN_PED quirk flag for XHCI core. [rogerq@ti.com] Updated code from platform data to device property and added DT binding. Signed-off-by:
Felipe Balbi <balbi@ti.com> Signed-off-by:
Mathias Nyman <mathias.nyman@linux.intel.com> Signed-off-by:
-
Felipe Balbi authored
[ Upstream commit 41135de1 ] Some devices from Texas Instruments [1] suffer from a silicon bug where Port Enabled/Disabled bit should not be used to silence an erroneous device. The bug is so that if port is disabled with PED bit, an IRQ for device removal (or attachment) will never fire. Just for the sake of completeness, the actual problem lies with SNPS USB IP and this affects all known versions up to 3.00a. A separate patch will be added to dwc3 to enabled this quirk flag if version is <= 3.00a. [1] - AM572x Silicon Errata http://www.ti.com/lit/er/sprz429j/sprz429j.pdf Section i896— USB xHCI Port Disable Feature Does Not Work Signed-off-by:
-
Vignesh R authored
[ Upstream commit b6ffcf21 ] UART uses as EDMA as dma engine on AM437x SoC and therefore, requires OMAP_DMA_TX_KICK quirk just like AM33xx. So, enable OMAP_DMA_TX_KICK quirk for AM437x platform as well. While at that, drop use of of_machine_is_compatible() and instead pass quirks via device data. Signed-off-by:
Vignesh R <vigneshr@ti.com> Acked-by:
Tony Lindgren <tony@atomide.com> Signed-off-by:
-
Stephen Boyd authored
[ Upstream commit dd374909 ] The core framework already handles setting this parameter with a platform quirk. Add the appropriate flag so that we always set AHBBURST to 0. Technically DT should be doing this, but we always do it for msm chipidea devices so setting the flag in the driver works just as well. If the burst needs to be anything besides 0, we expect the 'ahb-burst-config' dts property to be present. Acked-by:
Peter Chen <peter.chen@nxp.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by:
Stephen Boyd <stephen.boyd@linaro.org> Signed-off-by:
-
youling257 authored
[ Upstream commit 57180048 ] There are literally dozens of Insyde devices with a different name but with the same audio routing. Use a generic quirk to match on vendor name only to avoid recurring edits of the same thing. Signed-off-by:
youling257 <youling257@gmail.com> Signed-off-by:
-
Paulo Zanoni authored
[ Upstream commit 98b2f01c ] Back in 2014, commit fb7023e0 ("drm/i915: BDW: Adding Reserved PCI IDs.") added the reserved PCI IDs in order to try to make sure we had working drivers in case we ever released products using these IDs (since we had instances of this type of problem in the past). The problem is that the patch only touched the macros used by early-quirks.c and by the user space components that rely on i915_pciids.h, it didn't touch the macros used by i915_pci.c. So we correctly handled the stolen memory for these theoretical IDs, but we didn't actually drive the devices from i915.ko. So this patch fixes the original commit by actually making i915.ko drive these IDs, which was the goal. There's no information on what would be the GT count on these IDs, so we just go with the safer intel_broadwell_info, at the risk of ignoring a possibly inexistent BSD2_RING. I did some checking, and it seems that these IDs are driven by intel-gpu-tools, xf86-video-intel and libdrm (since they contain old copies of i915_pciids.h), but they are not checked by mesa. The alternative to this patch would be to just assume we're actually never going to use these IDs, and then remove them from our ID lists and make sure our user space components sync the latest i915_pciids.h copy. I'm fine with either approaches, as long as we make sure that every component tries to drive the same list of PCI IDs. Fixes: fb7023e0 ("drm/i915: BDW: Adding Reserved PCI IDs.") Cc: Rodrigo Vivi <rodrigo.vivi@intel.com> Cc: Ben Widawsky <ben@bwidawsk.net> Cc: Jani Nikula <jani.nikula@intel.com> Signed-off-by:
Paulo Zanoni <paulo.r.zanoni@intel.com> Reviewed-by:
Rodrigo Vivi <rodrigo.vivi@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1483473860-17644-3-git-send-email-paulo.r.zanoni@intel.comSigned-off-by:
-
Paulo Zanoni authored
[ Upstream commit 0784bc62 ] Commit 8d9c20e1 ("drm/i915: Remove .is_mobile field from platform struct") removed mobile vs desktop differences for HSW+, but forgot the Broadwell reserved IDs, so do it now. It's interesting to notice that these IDs are used by early-quirks.c but are *not* used by i915_pci.c. Cc: Carlos Santa <carlos.santa@intel.com> Cc: Rodrigo Vivi <rodrigo.vivi@intel.com> Signed-off-by:
-
Paulo Zanoni authored
[ Upstream commit 7fbd995c ] Remove duplicated IDs from the list. Currently, this definition is only used by early-quirks.c. From my understanding of the code, having duplicated IDs shouldn't be causing any bugs. Fixes: 8d9c20e1 ("drm/i915: Remove .is_mobile field from platform struct") Cc: Carlos Santa <carlos.santa@intel.com> Cc: Rodrigo Vivi <rodrigo.vivi@intel.com> Signed-off-by:
-
Jani Nikula authored
[ Upstream commit 23c4cfbd ] No reason not to be const. Reviewed-by:
Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by:
Jani Nikula <jani.nikula@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1482923186-22430-1-git-send-email-jani.nikula@intel.comSigned-off-by:
-
Paolo Bonzini authored
commit 06ce521a upstream. handle_vmon gets a reference on VMXON region page, but does not release it. Release the reference. Found by syzkaller; based on a patch by Dmitry. Reported-by:
Dmitry Vyukov <dvyukov@google.com> Signed-off-by:
Paolo Bonzini <pbonzini@redhat.com> Cc: "Charles (Chas) Williams" <ciwillia@brocade.com> Signed-off-by:
-
Jason A. Donenfeld authored
commit f5b98461 upstream. Now that our crng uses chacha20, we can rely on its speedy characteristics for replacing MD5, while simultaneously achieving a higher security guarantee. Before the idea was to use these functions if you wanted random integers that aren't stupidly insecure but aren't necessarily secure either, a vague gray zone, that hopefully was "good enough" for its users. With chacha20, we can strengthen this claim, since either we're using an rdrand-like instruction, or we're using the same crng as /dev/urandom. And it's faster than what was before. We could have chosen to replace this with a SipHash-derived function, which might be slightly faster, but at the cost of having yet another RNG construction in the kernel. By moving to chacha20, we have a single RNG to analyze and verify, and we also already get good performance improvements on all platforms. Implementation-wise, rather than use a generic buffer for both get_random_int/long and memcpy based on the size needs, we use a specific buffer for 32-bit reads and for 64-bit reads. This way, we're guaranteed to always have aligned accesses on all platforms. While slightly more verbose in C, the assembly this generates is a lot simpler than otherwise. Finally, on 32-bit platforms where longs and ints are the same size, we simply alias get_random_int to get_random_long. Signed-off-by:
Jason A. Donenfeld <Jason@zx2c4.com> Suggested-by:
Theodore Ts'o <tytso@mit.edu> Cc: Theodore Ts'o <tytso@mit.edu> Cc: Hannes Frederic Sowa <hannes@stressinduktion.org> Cc: Andy Lutomirski <luto@amacapital.net> Signed-off-by:
-
Chris Salls authored
commit cf01fb99 upstream. In the case that compat_get_bitmap fails we do not want to copy the bitmap to the user as it will contain uninitialized stack data and leak sensitive data. Signed-off-by:
Chris Salls <salls@cs.ucsb.edu> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by:
-
Johan Hovold authored
commit cf903e9d upstream. A patch documenting how to specify which kernels a particular fix should be backported to (seemingly) inadvertently added a minus sign after the kernel version. This particular stable-tag format had never been used prior to this patch, and was neither present when the patch in question was first submitted (it was added in v2 without any comment). Drop the minus sign to avoid any confusion. Fixes: fdc81b79 ("stable_kernel_rules: Add clause about specification of kernel versions to patch.") Signed-off-by:
Johan Hovold <johan@kernel.org> Signed-off-by:
-
Janusz Dziedzic authored
commit de288e36 upstream. In the case of bounced ep0 requests, we must delay DMA operation until after ->complete() otherwise we might overwrite contents of req->buf. This caused problems with RNDIS gadget. Signed-off-by:
Janusz Dziedzic <januszx.dziedzic@intel.com> Signed-off-by:
-
Changbin Du authored
commit 5180edc2 upstream. The srcu read lock must be held while accessing kvm memslots. This patch fix below warning for function kvmgt_rw_gpa(). [ 165.345093] [ ERR: suspicious RCU usage. ] [ 165.416538] Call Trace: [ 165.418989] dump_stack+0x85/0xc2 [ 165.422310] lockdep_rcu_suspicious+0xd7/0x110 [ 165.426769] kvm_read_guest_page+0x195/0x1b0 [kvm] [ 165.431574] kvm_read_guest+0x50/0x90 [kvm] [ 165.440492] kvmgt_rw_gpa+0x43/0xa0 [kvmgt] [ 165.444683] kvmgt_read_gpa+0x11/0x20 [kvmgt] [ 165.449061] gtt_get_entry64+0x4d/0xc0 [i915] [ 165.453438] ppgtt_populate_shadow_page_by_guest_entry+0x380/0xdc0 [i915] [ 165.460254] shadow_mm+0xd1/0x460 [i915] [ 165.472488] intel_vgpu_create_mm+0x1ab/0x210 [i915] [ 165.477472] intel_vgpu_g2v_create_ppgtt_mm+0x5f/0xc0 [i915] [ 165.483154] pvinfo_mmio_write+0x19b/0x1d0 [i915] [ 165.499068] intel_vgpu_emulate_mmio_write+0x3f9/0x600 [i915] [ 165.504827] intel_vgpu_rw+0x114/0x150 [kvmgt] [ 165.509281] intel_vgpu_write+0x16f/0x1a0 [kvmgt] [ 165.513993] vfio_mdev_write+0x20/0x30 [vfio_mdev] [ 165.518793] vfio_device_fops_write+0x24/0x30 [vfio] [ 165.523770] __vfs_write+0x28/0x120 [ 165.540529] vfs_write+0xce/0x1f0 v2: fix Cc format for stable Signed-off-by:
Changbin Du <changbin.du@intel.com> Reviewed-by:
Xiao Guangrong <guangrong.xiao@linux.intel.com> Reviewed-by:
Jike Song <jike.song@intel.com> Signed-off-by:
Zhenyu Wang <zhenyuw@linux.intel.com> Signed-off-by:
-
Zhenyu Wang authored
commit 2958b901 upstream. Fix to correctly assign 1ms for gvt scheduler interval time, as previous code using HZ is pretty broken. And use no delay for start gvt scheduler function. Fixes: 4b63960e ("drm/i915/gvt: vGPU schedule policy framework") Cc: Zhi Wang <zhi.a.wang@intel.com> Acked-by:
Chuanxiao Dong <chuanxiao.dong@intel.com> Signed-off-by:
-
Huacai Chen authored
commit 0be032c1 upstream. If scache.waysize is 0, r4k___flush_cache_all() will do nothing and then cause bugs. BTW, though vcache.waysize isn't being used by now, we also fix its calculation. Signed-off-by:
Huacai Chen <chenhc@lemote.com> Cc: John Crispin <john@phrozen.org> Cc: Steven J . Hill <Steven.Hill@caviumnetworks.com> Cc: Fuxin Zhang <zhangfx@lemote.com> Cc: Zhangjin Wu <wuzhangjin@gmail.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/15756/Signed-off-by:
Ralf Baechle <ralf@linux-mips.org> Signed-off-by:
-
Huacai Chen authored
commit 0115f6cb upstream. On VTLB+FTLB platforms (such as Loongson-3A R2), FTLB's pagesize is usually configured the same as PAGE_SIZE. In such a case, Huge page entry is not suitable to write in FTLB. Unfortunately, when a huge page is created, its page table entries haven't created immediately. Then the TLB refill handler will fetch an invalid page table entry which has no "HUGE" bit, and this entry may be written to FTLB. Since it is invalid, TLB load/store handler will then use tlbwi to write the valid entry at the same place. However, the valid entry is a huge page entry which isn't suitable for FTLB. Our solution is to modify build_huge_handler_tail. Flush the invalid old entry (whether it is in FTLB or VTLB, this is in order to reduce branches) and use tlbwr to write the valid new entry. Signed-off-by:
Rui Wang <wangr@lemote.com> Signed-off-by:
-
Huacai Chen authored
commit 033cffee upstream. Loongson-3A R2 and newer CPU have FTLB, but Config0.MT is 1, so add MIPS_CPU_FTLB to the CPU options. Signed-off-by:
-
Huacai Chen authored
commit 5a341331 upstream. Loongson-3's micro TLB (ITLB) is not strictly a subset of JTLB. That means: when a JTLB entry is replaced by hardware, there may be an old valid entry exists in ITLB. So, a TLB miss exception may occur while handle_ri_rdhwr() is running because it try to access EPC's content. However, handle_ri_rdhwr() doesn't clear EXL, which makes a TLB Refill exception be treated as a TLB Invalid exception and tlbp may fail. In this case, if FTLB (which is usually set-associative instead of set- associative) is enabled, a tlbp failure will cause an invalid tlbwi, which will hang the whole system. This patch rename handle_ri_rdhwr_vivt to handle_ri_rdhwr_tlbp and use it for Loongson-3. It try to solve the same problem described as below, but more straightforwards. https://patchwork.linux-mips.org/patch/12591/ I think Loongson-2 has the same problem, but it has no FTLB, so we just keep it as is. Signed-off-by:
-
Hauke Mehrtens authored
commit 6ef90877 upstream. Commit 08b3c894 ("MIPS: lantiq: Disable xbar fpi burst mode") accidentally requested the resources from the pmu address region instead of the xbar registers region, but the check for the return value of request_mem_region() was wrong. Commit 98ea51cb ("MIPS: Lantiq: Fix another request_mem_region() return code check") fixed the check of the return value of request_mem_region() which made the kernel panics. This patch now makes use of the correct memory region for the cross bar. Fixes: 08b3c894 ("MIPS: lantiq: Disable xbar fpi burst mode") Signed-off-by:
Hauke Mehrtens <hauke@hauke-m.de> Cc: John Crispin <john@phrozen.org> Cc: james.hogan@imgtec.com Cc: arnd@arndb.de Cc: sergei.shtylyov@cogentembedded.com Cc: john@phrozen.org Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/15751Signed-off-by:
-
Paul Burton authored
commit 4b5347a2 upstream. When building for microMIPS we need to ensure that the assembler always knows that there is code at the target of a branch or jump. Recent toolchains will fail to link a microMIPS kernel when this isn't the case due to what it thinks is a branch to non-microMIPS code. mips-mti-linux-gnu-ld kernel/built-in.o: .spinlock.text+0x2fc: Unsupported branch between ISA modes. mips-mti-linux-gnu-ld final link failed: Bad value This is due to inline assembly labels in spinlock.h not being followed by an instruction mnemonic, either due to a .subsection pseudo-op or the end of the inline asm block. Fix this with a .insn direction after such labels. Signed-off-by:
Paul Burton <paul.burton@imgtec.com> Signed-off-by:
James Hogan <james.hogan@imgtec.com> Reviewed-by:
Maciej W. Rozycki <macro@imgtec.com> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Ingo Molnar <mingo@redhat.com> Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/15325/Signed-off-by:
-
John Crispin authored
commit 7c5a3d81 upstream. There are two copy & paste errors in the definition of the 5GHz LNA and second ethernet pinmux. Fixes: f576fb6a ("MIPS: ralink: cleanup the soc specific pinmux data") Signed-off-by:
John Crispin <john@phrozen.org> Signed-off-by:
Daniel Golle <daniel@makrotopia.org> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/15328/Signed-off-by:
-
James Hogan authored
commit 2e6c7747 upstream. When a 32-bit kernel is configured to support MIPS64r6 (CPU_MIPS64_R6), MIPS_O32_FP64_SUPPORT won't be selected as it should be because MIPS32_O32 is disabled (o32 is already the default ABI available on 32-bit kernels). This results in userland FP breakage as CP0_Status.FR is read-only 1 since r6 (when an FPU is present) so __enable_fpu() will fail to clear FR. This causes the FPU emulator to get used which will incorrectly emulate 32-bit FPU registers. Force o32 fp64 support in this case by also selecting MIPS_O32_FP64_SUPPORT from CPU_MIPS64_R6 if 32BIT. Fixes: 4e9d324d ("MIPS: Require O32 FP64 support for MIPS64 with O32 compat") Signed-off-by:
-
Heiko Carstens authored
commit d09c5373 upstream. Commit fd2d2b19 ("s390: get_user() should zero on failure") intended to fix s390's get_user() implementation which did not zero the target operand if the read from user space faulted. Unfortunately the patch has no effect: the corresponding inline assembly specifies that the operand is only written to ("=") and the previous value is discarded. Therefore the compiler is free to and actually does omit the zero initialization. To fix this simply change the contraint modifier to "+", so the compiler cannot omit the initialization anymore. Fixes: c9ca7841 ("s390/uaccess: provide inline variants of get_user/put_user") Fixes: fd2d2b19 ("s390: get_user() should zero on failure") Cc: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by:
Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by:
Martin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by:
-
Marcelo Henrique Cerri authored
commit d82c0d12 upstream. Reorder the operations in decompress_kernel() to ensure initrd is moved to a safe location before the bss section is zeroed. During decompression bss can overlap with the initrd and this can corrupt the initrd contents depending on the size of the compressed kernel (which affects where the initrd is placed by the bootloader) and the size of the bss section of the decompressor. Also use the correct initrd size when checking for overlaps with parmblock. Fixes: 06c0dd72 ([S390] fix boot failures with compressed kernels) Reviewed-by:
Joy Latten <joy.latten@canonical.com> Reviewed-by:
Vineetha HariPai <vineetha.hari.pai@canonical.com> Signed-off-by:
Marcelo Henrique Cerri <marcelo.cerri@canonical.com> Signed-off-by:
-
Max Filippov authored
commit 2b83878d upstream. When __pa is applied to virtual address in uncached KSEG region the result is incorrect. Fix it by checking if the original address is in the uncached KSEG and adjusting the result. It looks better than masking off bits because pfn_valid would correctly work with new __pa results and it may be made working in noMMU case, once we get definition for uncached memory view. This is required for the dma_common_mmap and DMA debug code to work correctly: they both indirectly use __pa with coherent DMA addresses. In case of DMA debug the visible effect is false reports that an address mapped for DMA is accessed by CPU. Tested-by:
Boris Brezillon <boris.brezillon@free-electrons.com> Reviewed-by:
Max Filippov <jcmvbkbc@gmail.com> Signed-off-by:
-
