- 10 Mar, 2017 8 commits
-
-
Kieran Bingham authored
The device type isn't used anymore now that workarounds and PHY-specific operations are performed based on version information read at runtime. Remove it. Signed-off-by:
Kieran Bingham <kieran.bingham+renesas@ideasonboard.com> Signed-off-by:
Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Tested-by:
Neil Armstrong <narmstrong@baylibre.com> Reviewed-by:
Jose Abreu <joabreu@synopsys.com> Signed-off-by:
Archit Taneja <architt@codeaurora.org> Link: http://patchwork.freedesktop.org/patch/msgid/20170303172007.26541-9-laurent.pinchart+renesas@ideasonboard.com
-
Kieran Bingham authored
The DWC HDMI TX controller interfaces with a companion PHY. While Synopsys provides multiple standard PHYs, SoC vendors can also integrate a custom PHY. Modularize PHY configuration to support vendor PHYs through platform data. The existing PHY configuration code was originally written to support the DWC HDMI 3D TX PHY, and seems to be compatible with the DWC MLP PHY. The HDMI 2.0 PHY will require a separate configuration function. Signed-off-by:
Jose Abreu <Jose.Abreu@synopsys.com> Signed-off-by:
-
Laurent Pinchart authored
The HDMI TX controller support different PHYs whose programming interface can vary significantly, especially with vendor PHYs that are not provided by Synopsys. To support them, create a PHY operation structure that can be provided by the platform glue layer. The existing PHY handling code (limited to Synopsys PHY support) is refactored into a set of default PHY operations that are used automatically when the platform glue doesn't provide its own operations. Signed-off-by:
-
Laurent Pinchart authored
When powering the PHY up we need to wait for the PLL to lock. This is done by polling the TX_PHY_LOCK bit in the HDMI_PHY_STAT0 register (interrupt-based wait could be implemented as well but is likely overkill). The bit is asserted when the PLL locks, but the current code incorrectly waits for the bit to be deasserted. Fix it, and while at it, replace the udelay() with a sleep as the code never runs in non-sleepable context. To be consistent with the power down implementation move the poll loop to the power off function. Signed-off-by:
-
Laurent Pinchart authored
The PHY requires us to wait for the PHY to switch to low power mode after deasserting TXPWRON and before asserting PDDQ in the power down sequence, otherwise power down will fail. The PHY power down can be monitored though the TX_READY bit, available through I2C in the PHY registers, or the TX_PHY_LOCK bit, available through the HDMI TX registers. As the two are equivalent, let's pick the easier solution of polling the TX_PHY_LOCK bit. The power down code is currently duplicated in multiple places. To avoid spreading multiple calls to a TX_PHY_LOCK poll function, we have to refactor the power down code and group it all in a single function. Tests showed that one poll iteration was enough for TX_PHY_LOCK to become low, without requiring any additional delay. Retrying the read five times with a 1ms to 2ms delay between each attempt should thus be more than enough. Signed-off-by:
-
Neil Armstrong authored
If the input pixel format is not RGB, the CSC must be enabled in order to provide valid pixel to DVI sinks. This patch removes the hdmi only dependency on the CSC enabling. Reviewed-by:
Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by:
-
Laurent Pinchart authored
The color space converter isn't part of the PHY, move its configuration out of PHY code. Signed-off-by:
-
Laurent Pinchart authored
Most of the hdmi_phy_test_*() functions are unused. Remove them. Signed-off-by:
Nickey Yang <nickey.yang@rock-chips.com> Signed-off-by:
-
- 09 Mar, 2017 10 commits
-
-
Daniel Vetter authored
I'm torn on whether drm_minor really should be here or somewhere else. Maybe with more clarity after untangling drmP.h more this is easier to decide, for now I've put a FIXME comment right next to it. Right now we need struct drm_minor for the inline drm_file type helpers, and so it does kinda make sense to have them here. Next patch will kerneldoc-ify the entire pile. Reviewed-by:
Gustavo Padovan <gustavo.padovan@collabora.com> Signed-off-by:
Daniel Vetter <daniel.vetter@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/20170308141257.12119-10-daniel.vetter@ffwll.ch
-
Daniel Vetter authored
This was originally added by David Herrmann for range checks, but entirely unused. It confused me, so let's remove it. Cc: David Herrmann <dh.herrmann@gmail.com> Reviewed-by:
David Herrmann <dh.herrmann@gmail.com> Signed-off-by:
-
Daniel Vetter authored
It's not just file ops, but drm_file stuff in general. This is prep work to extracting a drm_file.h header in the next patch. Reviewed-by:
-
Daniel Vetter authored
Worst case if the hw can't support completion signalling in a race-free way we want the event to be too late, not too early. Text adapted from a proposal from Laurent - the other side of how to make hw work correctly where it's possible is imo already sufficiently documented. v2: Review from Laurent. Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by:
-
Daniel Vetter authored
An easy one as a drive-by. Reviewed-by:
-
Daniel Vetter authored
Just another step in finally making drmP.h obsolete. Reviewed-by:
-
Daniel Vetter authored
And remove the semi-kernel-doc stuff, to make sure no one uses this. Reviewed-by:
-
Daniel Vetter authored
Plus a little bit more documentation. v2: Untangle the missing forward decls to make drm_prime|gem.h free-standing. Reviewed-by:
-
Daniel Vetter authored
At least radeon, amdgpu and nouveau should be converted. We have patches for i915 already. v2: Spelling (Sean). Reviewed-by:
Sean Paul <seanpaul@chromium.org> Signed-off-by:
-
Noralf Trønnes authored
drm_debugfs_cleanup() now removes all minor->debugfs_list entries automatically, so it's not necessary to call drm_debugfs_remove_files(). Cc: airlied@linux.ie Cc: kraxel@redhat.com Signed-off-by:
Noralf Trønnes <noralf@tronnes.org> Link: http://patchwork.freedesktop.org/patch/msgid/20170307204924.1002-4-noralf@tronnes.org [ kraxel: solved conflict ] Signed-off-by:
Gerd Hoffmann <kraxel@redhat.com>
-
- 08 Mar, 2017 2 commits
-
-
Noralf Trønnes authored
Remove the .debugfs_cleanup() callback now that all the users are gone. Signed-off-by:
Daniel Vetter <daniel.vetter@ffwll.ch> Link: http://patchwork.freedesktop.org/patch/msgid/20170307204924.1002-3-noralf@tronnes.org
-
Noralf Trønnes authored
Move the contents of msm_debugfs_cleanup() to msm_drm_uninit() to free up the drm_driver->debugfs_cleanup callback. Also remove the mdp_kms_funcs->debugfs_cleanup callback which has no users. Cc: robdclark@gmail.com Signed-off-by:
Rob Clark <robdclark@gmail.com> Signed-off-by:
-
- 07 Mar, 2017 7 commits
-
-
Tomeu Vizoso authored
Gabriel Krisman reported these warnings when building the documentation: ./drivers/gpu/drm/drm_dp_helper.c:1165: warning: No description found for parameter 'crtc' ./drivers/gpu/drm/drm_dp_helper.c:1166: warning: No description found for parameter 'crtc' Reported-by:
Gabriel Krisman Bertazi <krisman@collabora.co.uk> Signed-off-by:
Tomeu Vizoso <tomeu.vizoso@collabora.com> Signed-off-by:
-
Gerd Hoffmann authored
Just use kmem_cache instead of rolling our own, limited implementation. Signed-off-by:
-
Gerd Hoffmann authored
Call qxl_add_monitors_config_modes() unconditionally. Do all sanity checks in that function. Fix sanity checks. monitors_config is the current monitor configuration, whereas client_monitors_config is the configuration requested by the spice client. So when filling the mode list, based on the spice client request, we need to look at client_monitors_config->count not monitors_config->count. Signed-off-by:
-
Gerd Hoffmann authored
Try to read the client monitors config at driver load time, even without explicit notification. So in case that info was filled before the driver loaded and we've missed the notifications because of that the settings will still be used. With that place we now have to take care to properly handle a empty client monitors config, so we don't trip over an uninitialized client monitors config. Signed-off-by:
-
Gerd Hoffmann authored
When reading the monitor config fails, don't retry forever. If it fails ten times in a row just give up to avoid the driver hangs. Also add a small delay after each attempt, so the host has a chance to complete a partial update. Signed-off-by:
-
Gerd Hoffmann authored
very old qxl hardware revisions (predating qxl ksm support by a few years) supported a fixed list of video modes only. The list is still provided by the virtual hardware, for backward compatibility reasons. The qxl kms driver never ever looks at it, except for dumping it to the kernel log at load time in case debug logging is enabled. Drop that pointless code. Signed-off-by:
-
Gabriel Krisman Bertazi authored
If fbdev emulation is disabled, the QXL shutdown path will try to clean a framebuffer that wasn't initialized, hitting the Oops below. The problem is that even when FBDEV_EMULATION is disabled we allocate the qfbdev strutucture, but we don't initialize it. The fix is to stop allocating the memory, since it won't be used. This allows the existing verification in the cleanup hook to do it's job preventing the oops. Now that we don't allocate the unused fbdev structure, we need to be careful when dereferencing it in the PM suspend hook. [ 24.284684] BUG: unable to handle kernel NULL pointer dereference at 00000000000002e0 [ 24.285627] IP: mutex_lock+0x18/0x30 [ 24.286049] PGD 78cdf067 [ 24.286050] PUD 7940f067 [ 24.286344] PMD 0 [ 24.286649] [ 24.287072] Oops: 0002 [#1] SMP [ 24.287422] Modules linked in: qxl [ 24.287806] CPU: 0 PID: 2328 Comm: bash Not tainted 4.10.0-rc5+ #97 [ 24.288515] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.9.3-20161025_171302-gandalf 04/01/2014 [ 24.289681] task: ffff88007c4c0000 task.stack: ffffc90001b58000 [ 24.290354] RIP: 0010:mutex_lock+0x18/0x30 [ 24.290812] RSP: 0018:ffffc90001b5bcb0 EFLAGS: 00010246 [ 24.291401] RAX: 0000000000000000 RBX: 00000000000002e0 RCX: 0000000000000000 [ 24.292209] RDX: ffff88007c4c0000 RSI: 0000000000000001 RDI: 00000000000002e0 [ 24.292987] RBP: ffffc90001b5bcb8 R08: fffffffffffffffe R09: 0000000000000001 [ 24.293797] R10: ffff880078d80b80 R11: 0000000000011400 R12: 0000000000000000 [ 24.294601] R13: 00000000000002e0 R14: ffffffffa0009c28 R15: 0000000000000060 [ 24.295439] FS: 00007f30e3acbb40(0000) GS:ffff88007fc00000(0000) knlGS:0000000000000000 [ 24.296364] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 24.296997] CR2: 00000000000002e0 CR3: 0000000078c7b000 CR4: 00000000000006f0 [ 24.297813] Call Trace: [ 24.298097] drm_framebuffer_cleanup+0x1f/0x70 [ 24.298612] qxl_fbdev_fini+0x68/0x90 [qxl] [ 24.299074] qxl_modeset_fini+0xd/0x30 [qxl] [ 24.299562] qxl_pci_remove+0x22/0x50 [qxl] [ 24.300025] pci_device_remove+0x34/0xb0 [ 24.300507] device_release_driver_internal+0x150/0x200 [ 24.301082] device_release_driver+0xd/0x10 [ 24.301587] unbind_store+0x108/0x150 [ 24.301993] drv_attr_store+0x20/0x30 [ 24.302402] sysfs_kf_write+0x32/0x40 [ 24.302827] kernfs_fop_write+0x108/0x190 [ 24.303269] __vfs_write+0x23/0x120 [ 24.303678] ? security_file_permission+0x36/0xb0 [ 24.304193] ? rw_verify_area+0x49/0xb0 [ 24.304636] vfs_write+0xb0/0x190 [ 24.305004] SyS_write+0x41/0xa0 [ 24.305362] entry_SYSCALL_64_fastpath+0x1a/0xa9 [ 24.305887] RIP: 0033:0x7f30e31d9620 [ 24.306285] RSP: 002b:00007ffc54b47e68 EFLAGS: 00000246 ORIG_RAX: 0000000000000001 [ 24.307128] RAX: ffffffffffffffda RBX: 00007f30e3497600 RCX: 00007f30e31d9620 [ 24.307928] RDX: 000000000000000d RSI: 0000000000da2008 RDI: 0000000000000001 [ 24.308727] RBP: 000000000070bc60 R08: 00007f30e3498760 R09: 00007f30e3acbb40 [ 24.309504] R10: 0000000000000073 R11: 0000000000000246 R12: 0000000000000001 [ 24.310295] R13: 0000000000000000 R14: 0000000000000000 R15: 00007ffc54b47f34 [ 24.311095] Code: 0e 01 e9 7b fe ff ff 66 90 66 2e 0f 1f 84 00 00 00 00 00 55 48 89 e5 53 48 89 fb e8 83 e8 ff ff 65 48 8b 14 25 40 c4 00 00 31 c0 <3e> 48 0f b1 13 48 85 c0 74 08 48 89 df e8 66 fd ff ff 5b 5d c3 [ 24.313182] RIP: mutex_lock+0x18/0x30 RSP: ffffc90001b5bcb0 [ 24.313811] CR2: 00000000000002e0 [ 24.314208] ---[ end trace 29669c1593cae14b ]--- Signed-off-by:
-
- 06 Mar, 2017 11 commits
-
-
Sean Paul authored
Fixes the following link error when CONFIG_DRM_ANALOGIX_DP is not defined: ERROR: "analogix_dp_start_crc" [drivers/gpu/drm/rockchip/rockchipdrm.ko] undefined! ERROR: "analogix_dp_stop_crc" [drivers/gpu/drm/rockchip/rockchipdrm.ko] undefined! Fixes: 3190e58d ("drm/rockchip: Implement CRC debugfs API") Cc: Tomeu Vizoso <tomeu.vizoso@collabora.com> Cc: Mark Yao <mark.yao@rock-chips.com> Cc: Sean Paul <seanpaul@chromium.org> Cc: Heiko Stuebner <heiko@sntech.de> Cc: dri-devel@lists.freedesktop.org Cc: linux-arm-kernel@lists.infradead.org Cc: linux-rockchip@lists.infradead.org Cc: Emil Velikov <emil.l.velikov@gmail.com> Reviewed-by:
Emil Velikov <emil.l.velikov@gmail.com> Signed-off-by:
-
Sean Paul authored
This patch fixes the following compilation error when CONFIG_DEBUG_FS is not defined. ../drivers/gpu/drm/drm_dp_helper.c: In function ‘drm_dp_aux_crc_work’: ../drivers/gpu/drm/drm_dp_helper.c:1029:13: error: ‘struct drm_crtc’ has no member named ‘crc’ ../drivers/gpu/drm/drm_dp_helper.c:1031:12: error: ‘struct drm_crtc’ has no member named ‘crc’ make[4]: *** [drivers/gpu/drm/drm_dp_helper.o] Error 1 make[4]: *** Waiting for unfinished jobs.... Fixes: 79c1da7c ("drm/dp: add helpers for capture of frame CRCs") Cc: Tomeu Vizoso <tomeu.vizoso@collabora.com> Cc: Sean Paul <seanpaul@chromium.org> Cc: Daniel Vetter <daniel.vetter@intel.com> Cc: Jani Nikula <jani.nikula@linux.intel.com> Cc: David Airlie <airlied@linux.ie> Cc: dri-devel@lists.freedesktop.org Reviewed-by:
-
Tomeu Vizoso authored
Implement the .set_crc_source() callback and call the DP helpers accordingly to start and stop CRC capture. This is only done if this CRTC is currently using the eDP connector. v3: Remove superfluous check on rockchip_crtc_state->output_type v6: Remove superfluous variable Signed-off-by:
Mark Yao <mark.yao@rock-chips.com> Signed-off-by:
-
Tomeu Vizoso authored
Add two simple functions that just take the drm_dp_aux from our struct and calls the corresponding DP helpers with it. v6: Pass to the DP helper the drm_crtc of the current connector (Sean Paul) Signed-off-by:
-
Tomeu Vizoso authored
Adds helpers for starting and stopping capture of frame CRCs through the DPCD. When capture is on, a worker waits for vblanks and retrieves the frame CRC to put it in the queue on the CRTC that is using the eDP connector, so it's passed to userspace. v2: Reuse drm_crtc_wait_one_vblank Update locking, as drm_crtc_add_crc_entry now takes the lock v3: Don't call wake_up_interruptible directly, that's now done in drm_crtc_add_crc_entry. v4: Style fixes (Sean Paul) Reworked retry of CRC reads (Sean Paul) Flush worker after stopping CRC generationa (Sean Paul) v5: Move back to make the retry explicitly once v6: Set and use the drm_crtc backpointer (Sean Paul) Signed-off-by: -
Tomeu Vizoso authored
This backpointer allows DP helpers to access the crtc it's currently being used for. v6: Have the backpointer be to drm_crtc (Sean Paul) Signed-off-by:
-
Maarten Lankhorst authored
There are new iterator macros that annotate whether the new or old state should be used. This is better than using a state that depends on whether it's called before or after swap. For clarity, also rename the variables from $obj_state to (old,new)_$obj_state as well. Signed-off-by:
Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1487256430-7625-6-git-send-email-maarten.lankhorst@linux.intel.comReviewed-by:
-
Maarten Lankhorst authored
This is a straightforward conversion that converts all the users of get_existing_state in atomic core to use get_old_state or get_new_state Changes since v1: - Fix using the wrong state in drm_atomic_helper_update_legacy_modeset_state. Changes since v2: - Use the correct state in disable_outputs() Changes since v3: - Rebase for link status training. Signed-off-by:
-
Maarten Lankhorst authored
After atomic commit, these macros should be used in place of get_existing_state. Also after commit get_xx_state should no longer be used because it may not have the required locks. The calls to drm_atomic_get_existing_$obj_state should no longer be used, and converted over to these new calls. Changes since v1: - Expand commit message. - Deprecate get_existing_*_state functions in the documentation. Signed-off-by:
-
Maarten Lankhorst authored
This function becomes a lot simpler when having passed both the old and new state to it. Looking at all callers, it seems that old_plane_state is never NULL so the check can be dropped. Signed-off-by:
-
Maarten Lankhorst authored
There are new iterator macros that annotate whether the new or old state should be used. This is better than using a state that depends on whether it's called before or after swap. For clarity, also rename the variables from $obj_state to (old,new)_$obj_state as well. Changes since v1: - Use old/new_*_state for variable names as much as possible. (pinchartl) - Expand commit message. Changes since v2: - Rebase on top of link training patches. - free -> cleanup (pinchartl) Signed-off-by:
-
- 05 Mar, 2017 2 commits
-
-
Laurent Pinchart authored
The THC63LVDM83D is a transparent LVDS encoder. Unlike dumb LVDS encoders it can be controlled through a few pins (power down, LVDS swing, clock edge selection) and requires power supplies. However, on several boards where the device is used neither the control pins nor the power supply are controllable. To avoid developing a separate device-specific driver add a "thine,thc63lvdm83d" compatible entry to the lvds-encoder driver. This will allow supporting many THC63LVDM83D-based boards easily, while allowing future development of an thc63lvdm83d driver when needed without breaking backward compatibility. Signed-off-by:
-
Laurent Pinchart authored
The ADV7123 is a transparent VGA DAC. Unlike dumb VGA DACs it can be controlled through a power save pin, and requires a power supply. However, on most boards where the device is used neither the power save signal nor the power supply are controllable. To avoid developing a separate device-specific driver add an "adi,adv7123" compatible entry to the dumb-vga-dac driver. This will allow supporting most ADV7123-based boards easily, while allowing future development of an adv7123 driver when needed without breaking backward compatibility. Signed-off-by:
Maxime Ripard <maxime.ripard@free-electrons.com> Signed-off-by:
-
