[ Upstream commit 5c056fdc ]

After sending an authorizer (ceph_x_authorize_a + ceph_x_authorize_b),
the client gets back a ceph_x_authorize_reply, which it is supposed to
verify to ensure the authenticity and protect against replay attacks.
The code for doing this is there (ceph_x_verify_authorizer_reply(),
ceph_auth_verify_authorizer_reply() + plumbing), but it is never
invoked by the the messenger.

AFAICT this goes back to 2009, when ceph authentication protocols
support was added to the kernel client in 4e7a5dcd ("ceph:
negotiate authentication protocol; implement AUTH_NONE protocol").

The second param of ceph_connection_operations::verify_authorizer_reply
is unused all the way down.  Pass 0 to facilitate backporting, and kill
it in the next commit.

Cc: stable@vger.kernel.org
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Reviewed-by: Sage Weil <sage@redhat.com>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>

[ Upstream commit 995c6a7f ]

Sampling rate changes after first set one are not reflected to the
hardware, while driver and ALSA think the rate has been changed.

Fix the problem by properly stopping the interface at the beginning of
prepare call, allowing new rate to be set to the hardware. This keeps
the hardware in sync with the driver.
Signed-off-by: Jussi Laako <jussi@sonarnerd.net>
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>

[ Upstream commit 5457e03d ]

The buffer for iucv_message_receive() needs to be below 2 GB. In
__iucv_message_receive(), the buffer address is casted to an u32, which
would result in either memory corruption or an addressing exception when
using addresses >= 2 GB.

Fix this by using GFP_DMA for the buffer allocation.

Cc: stable@vger.kernel.org
Signed-off-by: Gerald Schaefer <gerald.schaefer@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>

[ Upstream commit 79e51b5c ]

Currently it is impossible to edit the value of a config symbol with a
prompt longer than (terminal width - 2) characters.  dialog_inputbox()
calculates a negative x-offset for the input window and newwin() fails
as this is invalid.  It also doesn't check for this failure, so it
busy-loops calling wgetch(NULL) which immediately returns -1.

The additions in the offset calculations also don't match the intended
size of the window.

Limit the window size and calculate the offset similarly to
show_scroll_win().

Cc: stable <stable@vger.kernel.org>
Fixes: 692d97c3 ("kconfig: new configuration interface (nconfig)")
Signed-off-by: Ben Hutchings <ben.hutchings@codethink.co.uk>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>

[ Upstream commit 1cded9d2 ]

There are two problems with refcounting of auth_gss messages.

First, the reference on the pipe->pipe list (taken by a call
to rpc_queue_upcall()) is not counted.  It seems to be
assumed that a message in pipe->pipe will always also be in
pipe->in_downcall, where it is correctly reference counted.

However there is no guaranty of this.  I have a report of a
NULL dereferences in rpc_pipe_read() which suggests a msg
that has been freed is still on the pipe->pipe list.

One way I imagine this might happen is:
- message is queued for uid=U and auth->service=S1
- rpc.gssd reads this message and starts processing.
  This removes the message from pipe->pipe
- message is queued for uid=U and auth->service=S2
- rpc.gssd replies to the first message. gss_pipe_downcall()
  calls __gss_find_upcall(pipe, U, NULL) and it finds the
  *second* message, as new messages are placed at the head
  of ->in_downcall, and the service type is not checked.
- This second message is removed from ->in_downcall and freed
  by gss_release_msg() (even though it is still on pipe->pipe)
- rpc.gssd tries to read another message, and dereferences a pointer
  to this message that has just been freed.

I fix this by incrementing the reference count before calling
rpc_queue_upcall(), and decrementing it if that fails, or normally in
gss_pipe_destroy_msg().

It seems strange that the reply doesn't target the message more
precisely, but I don't know all the details.  In any case, I think the
reference counting irregularity became a measureable bug when the
extra arg was added to __gss_find_upcall(), hence the Fixes: line
below.

The second problem is that if rpc_queue_upcall() fails, the new
message is not freed. gss_alloc_msg() set the ->count to 1,
gss_add_msg() increments this to 2, gss_unhash_msg() decrements to 1,
then the pointer is discarded so the memory never gets freed.

Fixes: 9130b8db ("SUNRPC: allow for upcalls for same uid but different gss service")
Cc: stable@vger.kernel.org
Link: https://bugzilla.opensuse.org/show_bug.cgi?id=1011250Signed-off-by: NeilBrown <neilb@suse.com>
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>

[ Upstream commit 578620f4 ]

We should set the error code if kzalloc() fails.

Fixes: 67cf5b09 ("ext4: add the basic function for inline data support")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Cc: stable@vger.kernel.org
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>

[ Upstream commit c0cf3ef5 ]

What matters when deciding if we should make a page uptodate is
not how much we _wanted_ to copy, but how much we actually have
copied.  As it is, on architectures that do not zero tail on
short copy we can leave uninitialized data in page marked uptodate.

Cc: stable@vger.kernel.org
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>

[ Upstream commit 794de08a ]

Both the wakeup and irqsoff tracers can use the function graph tracer when
the display-graph option is set. The problem is that they ignore the notrace
file, and record the entry of functions that would be ignored by the
function_graph tracer. This causes the trace->depth to be recorded into the
ring buffer. The set_graph_notrace uses a trick by adding a large negative
number to the trace->depth when a graph function is to be ignored.

On trace output, the graph function uses the depth to record a stack of
functions. But since the depth is negative, it accesses the array with a
negative number and causes an out of bounds access that can cause a kernel
oops or corrupt data.

Have the print functions handle cases where a tracer still records functions
even when they are in set_graph_notrace.

Also add warnings if the depth is below zero before accessing the array.

Note, the function graph logic will still prevent the return of these
functions from being recorded, which means that they will be left hanging
without a return. For example:

   # echo '*spin*' > set_graph_notrace
   # echo 1 > options/display-graph
   # echo wakeup > current_tracer
   # cat trace
   [...]
      _raw_spin_lock() {
        preempt_count_add() {
        do_raw_spin_lock() {
      update_rq_clock();

Where it should look like:

      _raw_spin_lock() {
        preempt_count_add();
        do_raw_spin_lock();
      }
      update_rq_clock();

Cc: stable@vger.kernel.org
Cc: Namhyung Kim <namhyung.kim@lge.com>
Fixes: 29ad23b0 ("ftrace: Add set_graph_notrace filter")
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>

[ Upstream commit d8a12b71 ]

Adding registration for 3G modem DWM-158 in usb-serial-option
Signed-off-by: Giuseppe Lippolis <giu.lippolis@gmail.com>
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>

[ Upstream commit 5b09eff0 ]

This patch adds support for PIDs 0x1040, 0x1041 of Telit LE922A.

Since the interface positions are the same than the ones used
for other Telit compositions, previous defined blacklists are used.
Signed-off-by: Daniele Palmas <dnlplm@gmail.com>
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>

[ Upstream commit 82ffb6fc ]

The Logitech QuickCam Communicate Deluxe/S7500 microphone fails with the
following warning.

[    6.778995] usb 2-1.2.2.2: Warning! Unlikely big volume range (=3072),
cval->res is probably wrong.
[    6.778996] usb 2-1.2.2.2: [5] FU [Mic Capture Volume] ch = 1, val =
4608/7680/1

Adding it to the list of devices in volume_control_quirks makes it work
properly, fixing related typo.
Signed-off-by: Con Kolivas <kernel@kolivas.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>

[ Upstream commit 314c25c5 ]

In dm_sm_metadata_create() we temporarily change the dm_space_map
operations from 'ops' (whose .destroy function deallocates the
sm_metadata) to 'bootstrap_ops' (whose .destroy function doesn't).

If dm_sm_metadata_create() fails in sm_ll_new_metadata() or
sm_ll_extend(), it exits back to dm_tm_create_internal(), which calls
dm_sm_destroy() with the intention of freeing the sm_metadata, but it
doesn't (because the dm_space_map operations is still set to
'bootstrap_ops').

Fix this by setting the dm_space_map operations back to 'ops' if
dm_sm_metadata_create() fails when it is set to 'bootstrap_ops'.
Signed-off-by: Benjamin Marzinski <bmarzins@redhat.com>
Acked-by: Joe Thornber <ejt@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Cc: stable@vger.kernel.org
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>

[ Upstream commit 24d5373d ]

The function xen_guest_init is using __alloc_percpu with an alignment
which are not power of two.

However, the percpu allocator never supported alignments which are not power
of two and has always behaved incorectly in thise case.

Commit 3ca45a46 "percpu: ensure requested alignment is power of two"
introduced a check which trigger a warning [1] when booting linux-next
on Xen. But in reality this bug was always present.

This can be fixed by replacing the call to __alloc_percpu with
alloc_percpu. The latter will use an alignment which are a power of two.

[1]

[    0.023921] illegal size (48) or align (48) for percpu allocation
[    0.024167] ------------[ cut here ]------------
[    0.024344] WARNING: CPU: 0 PID: 1 at linux/mm/percpu.c:892 pcpu_alloc+0x88/0x6c0
[    0.024584] Modules linked in:
[    0.024708]
[    0.024804] CPU: 0 PID: 1 Comm: swapper/0 Not tainted
4.9.0-rc7-next-20161128 #473
[    0.025012] Hardware name: Foundation-v8A (DT)
[    0.025162] task: ffff80003d870000 task.stack: ffff80003d844000
[    0.025351] PC is at pcpu_alloc+0x88/0x6c0
[    0.025490] LR is at pcpu_alloc+0x88/0x6c0
[    0.025624] pc : [<ffff00000818e678>] lr : [<ffff00000818e678>]
pstate: 60000045
[    0.025830] sp : ffff80003d847cd0
[    0.025946] x29: ffff80003d847cd0 x28: 0000000000000000
[    0.026147] x27: 0000000000000000 x26: 0000000000000000
[    0.026348] x25: 0000000000000000 x24: 0000000000000000
[    0.026549] x23: 0000000000000000 x22: 00000000024000c0
[    0.026752] x21: ffff000008e97000 x20: 0000000000000000
[    0.026953] x19: 0000000000000030 x18: 0000000000000010
[    0.027155] x17: 0000000000000a3f x16: 00000000deadbeef
[    0.027357] x15: 0000000000000006 x14: ffff000088f79c3f
[    0.027573] x13: ffff000008f79c4d x12: 0000000000000041
[    0.027782] x11: 0000000000000006 x10: 0000000000000042
[    0.027995] x9 : ffff80003d847a40 x8 : 6f697461636f6c6c
[    0.028208] x7 : 6120757063726570 x6 : ffff000008f79c84
[    0.028419] x5 : 0000000000000005 x4 : 0000000000000000
[    0.028628] x3 : 0000000000000000 x2 : 000000000000017f
[    0.028840] x1 : ffff80003d870000 x0 : 0000000000000035
[    0.029056]
[    0.029152] ---[ end trace 0000000000000000 ]---
[    0.029297] Call trace:
[    0.029403] Exception stack(0xffff80003d847b00 to
                               0xffff80003d847c30)
[    0.029621] 7b00: 0000000000000030 0001000000000000
ffff80003d847cd0 ffff00000818e678
[    0.029901] 7b20: 0000000000000002 0000000000000004
ffff000008f7c060 0000000000000035
[    0.030153] 7b40: ffff000008f79000 ffff000008c4cd88
ffff80003d847bf0 ffff000008101778
[    0.030402] 7b60: 0000000000000030 0000000000000000
ffff000008e97000 00000000024000c0
[    0.030647] 7b80: 0000000000000000 0000000000000000
0000000000000000 0000000000000000
[    0.030895] 7ba0: 0000000000000035 ffff80003d870000
000000000000017f 0000000000000000
[    0.031144] 7bc0: 0000000000000000 0000000000000005
ffff000008f79c84 6120757063726570
[    0.031394] 7be0: 6f697461636f6c6c ffff80003d847a40
0000000000000042 0000000000000006
[    0.031643] 7c00: 0000000000000041 ffff000008f79c4d
ffff000088f79c3f 0000000000000006
[    0.031877] 7c20: 00000000deadbeef 0000000000000a3f
[    0.032051] [<ffff00000818e678>] pcpu_alloc+0x88/0x6c0
[    0.032229] [<ffff00000818ece8>] __alloc_percpu+0x18/0x20
[    0.032409] [<ffff000008d9606c>] xen_guest_init+0x174/0x2f4
[    0.032591] [<ffff0000080830f8>] do_one_initcall+0x38/0x130
[    0.032783] [<ffff000008d90c34>] kernel_init_freeable+0xe0/0x248
[    0.032995] [<ffff00000899a890>] kernel_init+0x10/0x100
[    0.033172] [<ffff000008082ec0>] ret_from_fork+0x10/0x50
Reported-by: Wei Chen <wei.chen@arm.com>
Link: https://lkml.org/lkml/2016/11/28/669Signed-off-by: Julien Grall <julien.grall@arm.com>
Signed-off-by: Stefano Stabellini <sstabellini@kernel.org>
Reviewed-by: Stefano Stabellini <sstabellini@kernel.org>
Cc: stable@vger.kernel.org
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>

[ Upstream commit 8729675c ]

New variant.
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>

[ Upstream commit 53e0e11e ]

We can not unlock/lock cifs_tcp_ses_lock while walking through ses
and tcon lists because it can corrupt list iterator pointers and
a tcon structure can be released if we don't hold an extra reference.
Fix it by moving a reconnect process to a separate delayed work
and acquiring a reference to every tcon that needs to be reconnected.
Also do not send an echo request on newly established connections.

CC: Stable <stable@vger.kernel.org>
Signed-off-by: Pavel Shilovsky <pshilov@microsoft.com>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>

[ Upstream commit e3d240e9 ]

If maxBuf is not 0 but less than a size of SMB2 lock structure
we can end up with a memory corruption.

Cc: Stable <stable@vger.kernel.org>
Signed-off-by: Pavel Shilovsky <pshilov@microsoft.com>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>

[ Upstream commit 4772c795 ]

Cc: Stable <stable@vger.kernel.org>
Acked-by: Sachin Prabhu <sprabhu@redhat.com>
Signed-off-by: Pavel Shilovsky <pshilov@microsoft.com>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>

[ Upstream commit 30121604 ]

Add device-id entry for GW Instek AFG-125, which has a byte swapped
bInterfaceSubClass (0x20).
Signed-off-by: Nathaniel Quillin <ndq@google.com>
Acked-by: Oliver Neukum <oneukum@suse.com>
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>

[ Upstream commit 61e53bd0 ]

Clearing the tuning bits should reset the tuning circuit. However there is
more to do. Reset the command and data lines for good measure, and then
for eMMC ensure the card is not still trying to process a tuning command by
sending a stop command.

Note the JEDEC eMMC specification says the stop command (CMD12) can be used
to stop a tuning command (CMD21) whereas the SD specification is silent on
the subject with respect to the SD tuning command (CMD19). Considering that
CMD12 is not a valid SDIO command, the stop command is sent only when the
tuning command is CMD21 i.e. for eMMC. That addresses cases seen so far
which have been on eMMC.

Note that this replaces the commit fe5fb2e3 ("mmc: sdhci: Reset cmd and
data circuits after tuning failure") which is being reverted for v4.9+.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Tested-by: Dan O'Donovan <dan@emutex.com>
Cc: stable@vger.kernel.org
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>

[ Upstream commit 16200948 ]

We've got a kernel crash report showing like:

  Unable to handle kernel NULL pointer dereference at virtual address 00000008 pgd = a1d7c000
  [00000008] *pgd=31c93831, *pte=00000000, *ppte=00000000
  Internal error: Oops: 17 [#1] PREEMPT SMP ARM
  CPU: 0 PID: 250 Comm: dbus-daemon Not tainted 3.14.51-03479-gf50bdf4 #1
  task: a3ae61c0 ti: a08c8000 task.ti: a08c8000
  PC is at retire_capture_urb+0x10/0x1f4 [snd_usb_audio]
  LR is at snd_complete_urb+0x140/0x1f0 [snd_usb_audio]
  pc : [<7f0eb22c>]    lr : [<7f0e57fc>]    psr: 200e0193
  sp : a08c9c98  ip : a08c9ce8  fp : a08c9ce4
  r10: 0000000a  r9 : 00000102  r8 : 94cb3000
  r7 : 94cb3000  r6 : 94d0f000  r5 : 94d0e8e8  r4 : 94d0e000
  r3 : 7f0eb21c  r2 : 00000000  r1 : 94cb3000  r0 : 00000000
  Flags: nzCv  IRQs off  FIQs on  Mode SVC_32  ISA ARM  Segment user
  Control: 10c5387d  Table: 31d7c04a  DAC: 00000015
  Process dbus-daemon (pid: 250, stack limit = 0xa08c8238)
  Stack: (0xa08c9c98 to 0xa08ca000)
  ...
  Backtrace:
  [<7f0eb21c>] (retire_capture_urb [snd_usb_audio]) from [<7f0e57fc>] (snd_complete_urb+0x140/0x1f0 [snd_usb_audio])
  [<7f0e56bc>] (snd_complete_urb [snd_usb_audio]) from [<80371118>] (__usb_hcd_giveback_urb+0x78/0xf4)
  [<803710a0>] (__usb_hcd_giveback_urb) from [<80371514>] (usb_giveback_urb_bh+0x8c/0xc0)
  [<80371488>] (usb_giveback_urb_bh) from [<80028e3c>] (tasklet_hi_action+0xc4/0x148)
  [<80028d78>] (tasklet_hi_action) from [<80028358>] (__do_softirq+0x190/0x380)
  [<800281c8>] (__do_softirq) from [<80028858>] (irq_exit+0x8c/0xfc)
  [<800287cc>] (irq_exit) from [<8000ea88>] (handle_IRQ+0x8c/0xc8)
  [<8000e9fc>] (handle_IRQ) from [<800085e8>] (gic_handle_irq+0xbc/0xf8)
  [<8000852c>] (gic_handle_irq) from [<80509044>] (__irq_svc+0x44/0x78)
  [<80508820>] (_raw_spin_unlock_irq) from [<8004b880>] (finish_task_switch+0x5c/0x100)
  [<8004b824>] (finish_task_switch) from [<805052f0>] (__schedule+0x48c/0x6d8)
  [<80504e64>] (__schedule) from [<805055d4>] (schedule+0x98/0x9c)
  [<8050553c>] (schedule) from [<800116c8>] (do_work_pending+0x30/0xd0)
  [<80011698>] (do_work_pending) from [<8000e160>] (work_pending+0xc/0x20)
  Code: e1a0c00d e92ddff0 e24cb004 e24dd024 (e5902008)
  Kernel panic - not syncing: Fatal exception in interrupt

There is a race between retire_capture_urb() and stop_endpoints().
The latter is called at stopping the stream and it sets some endpoint
fields to NULL.  But its call is asynchronous, thus the pending
complete callback might get called after these NULL clears, and it
leads the NULL dereference like the above.

The fix is to move the NULL clearance after the synchronization,
i.e. wait_clear_urbs().  This is called at prepare and hw_free
callbacks, so it's assured to be called before the restart of the
stream or the release of the stream.

Also, while we're at it, put the EP_FLAG_RUNNING flag check at the
beginning of snd_complete_urb() to skip the pending complete after the
stream is stopped.

Fixes: b2eb950d ("ALSA: usb-audio: stop both data and sync...")
Reported-by: Jiada Wang <jiada_wang@mentor.com>
Reported-by: Mark Craske <Mark_Craske@mentor.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>

[ Upstream commit 6b10b23c ]

xlog_recover_clear_agi_bucket didn't set the
type to XFS_BLFT_AGI_BUF, so we got a warning during log
replay (or an ASSERT on a debug build).

    XFS (md0): Unknown buffer type 0!
    XFS (md0): _xfs_buf_ioapply: no ops on block 0xaea8802/0x1

Fix this, as was done in f19b872b for 2 other locations
with the same problem.

cc: <stable@vger.kernel.org> # 3.10 to current
Signed-off-by: Eric Sandeen <sandeen@redhat.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Dave Chinner <david@fromorbit.com>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>

[ Upstream commit af309226 ]

If a block device is closed while iterate_bdevs() is handling it, the
following NULL pointer dereference occurs because bdev->b_disk is NULL
in bdev_get_queue(), which is called from blk_get_backing_dev_info() (in
turn called by the mapping_cap_writeback_dirty() call in
__filemap_fdatawrite_range()):

 BUG: unable to handle kernel NULL pointer dereference at 0000000000000508
 IP: [<ffffffff81314790>] blk_get_backing_dev_info+0x10/0x20
 PGD 9e62067 PUD 9ee8067 PMD 0
 Oops: 0000 [#1] PREEMPT SMP DEBUG_PAGEALLOC
 Modules linked in:
 CPU: 1 PID: 2422 Comm: sync Not tainted 4.5.0-rc7+ #400
 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996)
 task: ffff880009f4d700 ti: ffff880009f5c000 task.ti: ffff880009f5c000
 RIP: 0010:[<ffffffff81314790>]  [<ffffffff81314790>] blk_get_backing_dev_info+0x10/0x20
 RSP: 0018:ffff880009f5fe68  EFLAGS: 00010246
 RAX: 0000000000000000 RBX: ffff88000ec17a38 RCX: ffffffff81a4e940
 RDX: 7fffffffffffffff RSI: 0000000000000000 RDI: ffff88000ec176c0
 RBP: ffff880009f5fe68 R08: 0000000000000000 R09: 0000000000000000
 R10: 0000000000000001 R11: 0000000000000000 R12: ffff88000ec17860
 R13: ffffffff811b25c0 R14: ffff88000ec178e0 R15: ffff88000ec17a38
 FS:  00007faee505d700(0000) GS:ffff88000fb00000(0000) knlGS:0000000000000000
 CS:  0010 DS: 0000 ES: 0000 CR0: 000000008005003b
 CR2: 0000000000000508 CR3: 0000000009e8a000 CR4: 00000000000006e0
 Stack:
  ffff880009f5feb8 ffffffff8112e7f5 0000000000000000 7fffffffffffffff
  0000000000000000 0000000000000000 7fffffffffffffff 0000000000000001
  ffff88000ec178e0 ffff88000ec17860 ffff880009f5fec8 ffffffff8112e81f
 Call Trace:
  [<ffffffff8112e7f5>] __filemap_fdatawrite_range+0x85/0x90
  [<ffffffff8112e81f>] filemap_fdatawrite+0x1f/0x30
  [<ffffffff811b25d6>] fdatawrite_one_bdev+0x16/0x20
  [<ffffffff811bc402>] iterate_bdevs+0xf2/0x130
  [<ffffffff811b2763>] sys_sync+0x63/0x90
  [<ffffffff815d4272>] entry_SYSCALL_64_fastpath+0x12/0x76
 Code: 0f 1f 44 00 00 48 8b 87 f0 00 00 00 55 48 89 e5 <48> 8b 80 08 05 00 00 5d
 RIP  [<ffffffff81314790>] blk_get_backing_dev_info+0x10/0x20
  RSP <ffff880009f5fe68>
 CR2: 0000000000000508
 ---[ end trace 2487336ceb3de62d ]---

The crash is easily reproducible by running the following command, if an
msleep(100) is inserted before the call to func() in iterate_devs():

 while :; do head -c1 /dev/nullb0; done > /dev/null & while :; do sync; done

Fix it by holding the bd_mutex across the func() call and only calling
func() if the bdev is opened.

Cc: stable@vger.kernel.org
Fixes: 5c0d6b60 ("vfs: Create function for iterating over block devices")
Reported-and-tested-by: Wei Fang <fangwei1@huawei.com>
Signed-off-by: Rabin Vincent <rabinv@axis.com>
Signed-off-by: Jan Kara <jack@suse.cz>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@fb.com>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>

[ Upstream commit 2a7bf53f ]

If a log tree has a layout like the following:

leaf N:
        ...
        item 240 key (282 DIR_LOG_ITEM 0) itemoff 8189 itemsize 8
                dir log end 1275809046
leaf N + 1:
        item 0 key (282 DIR_LOG_ITEM 3936149215) itemoff 16275 itemsize 8
                dir log end 18446744073709551615
        ...

When we pass the value 1275809046 + 1 as the parameter start_ret to the
function tree-log.c:find_dir_range() (done by replay_dir_deletes()), we
end up with path->slots[0] having the value 239 (points to the last item
of leaf N, item 240). Because the dir log item in that position has an
offset value smaller than *start_ret (1275809046 + 1) we need to move on
to the next leaf, however the logic for that is wrong since it compares
the current slot to the number of items in the leaf, which is smaller
and therefore we don't lookup for the next leaf but instead we set the
slot to point to an item that does not exist, at slot 240, and we later
operate on that slot which has unexpected content or in the worst case
can result in an invalid memory access (accessing beyond the last page
of leaf N's extent buffer).

So fix the logic that checks when we need to lookup at the next leaf
by first incrementing the slot and only after to check if that slot
is beyond the last item of the current leaf.
Signed-off-by: Robbie Ko <robbieko@synology.com>
Reviewed-by: Filipe Manana <fdmanana@suse.com>
Fixes: e02119d5 (Btrfs: Add a write ahead tree log to optimize synchronous operations)
Cc: stable@vger.kernel.org  # 2.6.29+
Signed-off-by: Filipe Manana <fdmanana@suse.com>
[Modified changelog for clarity and correctness]
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>

[ Upstream commit 6dff5b67 ]

GCC 5 generates different code for this bootwrapper null check that
causes the PS3 to hang very early in its bootup. This check is of
limited value, so just get rid of it.

Cc: stable@vger.kernel.org
Signed-off-by: Geoff Levand <geoff@infradead.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>

[ Upstream commit 6774d5f5 ]

Kill urbs and disable read before returning from open on failure to
retrieve the line state.

Fixes: 1da177e4 ("Linux-2.6.12-rc2")
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>

[ Upstream commit f37fabb8 ]

In the critical sysfs entry the thermal hwmon was returning wrong
temperature to the user-space.  It was reporting the temperature of the
first trip point instead of the temperature of critical trip point.

For example:
	/sys/class/hwmon/hwmon0/temp1_crit:50000
	/sys/class/thermal/thermal_zone0/trip_point_0_temp:50000
	/sys/class/thermal/thermal_zone0/trip_point_0_type:active
	/sys/class/thermal/thermal_zone0/trip_point_3_temp:120000
	/sys/class/thermal/thermal_zone0/trip_point_3_type:critical

Since commit e68b16ab ("thermal: add hwmon sysfs I/F") the driver
have been registering a sysfs entry if get_crit_temp() callback was
provided.  However when accessed, it was calling get_trip_temp() instead
of the get_crit_temp().

Fixes: e68b16ab ("thermal: add hwmon sysfs I/F")
Cc: <stable@vger.kernel.org>
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>

[ Upstream commit e8d7c332 ]

Current implementation employ 16bit counter of active stripes in lower
bits of bio->bi_phys_segments. If request is big enough to overflow
this counter bio will be completed and freed too early.

Fortunately this not happens in default configuration because several
other limits prevent that: stripe_cache_size * nr_disks effectively
limits count of active stripes. And small max_sectors_kb at lower
disks prevent that during normal read/write operations.

Overflow easily happens in discard if it's enabled by module parameter
"devices_handle_discard_safely" and stripe_cache_size is set big enough.

This patch limits requests size with 256Mb - 8Kb to prevent overflows.
Signed-off-by: Konstantin Khlebnikov <khlebnikov@yandex-team.ru>
Cc: Shaohua Li <shli@kernel.org>
Cc: Neil Brown <neilb@suse.com>
Cc: stable@vger.kernel.org
Signed-off-by: Shaohua Li <shli@fb.com>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>

[ Upstream commit 05e6ea26 ]

The struct file_operations instance serving the f2fs/status debugfs file
lacks an initialization of its ->owner.

This means that although that file might have been opened, the f2fs module
can still get removed. Any further operation on that opened file, releasing
included,  will cause accesses to unmapped memory.

Indeed, Mike Marshall reported the following:

  BUG: unable to handle kernel paging request at ffffffffa0307430
  IP: [<ffffffff8132a224>] full_proxy_release+0x24/0x90
  <...>
  Call Trace:
   [] __fput+0xdf/0x1d0
   [] ____fput+0xe/0x10
   [] task_work_run+0x8e/0xc0
   [] do_exit+0x2ae/0xae0
   [] ? __audit_syscall_entry+0xae/0x100
   [] ? syscall_trace_enter+0x1ca/0x310
   [] do_group_exit+0x44/0xc0
   [] SyS_exit_group+0x14/0x20
   [] do_syscall_64+0x61/0x150
   [] entry_SYSCALL64_slow_path+0x25/0x25
  <...>
  ---[ end trace f22ae883fa3ea6b8 ]---
  Fixing recursive fault but reboot is needed!

Fix this by initializing the f2fs/status file_operations' ->owner with
THIS_MODULE.

This will allow debugfs to grab a reference to the f2fs module upon any
open on that file, thus preventing it from getting removed.

Fixes: 902829aa ("f2fs: move proc files to debugfs")
Reported-by: Mike Marshall <hubcap@omnibond.com>
Reported-by: Martin Brandenburg <martin@omnibond.com>
Cc: stable@vger.kernel.org
Signed-off-by: Nicolai Stange <nicstange@gmail.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>

[ Upstream commit 989dbe4a ]

This group of new pins is not in the pin quirk table yet, adding
them to the pin quirk table to fix the headset-mic problem.

Cc: <stable@vger.kernel.org>
Signed-off-by: Hui Wang <hui.wang@canonical.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>

[ Upstream commit 265e9098 ]

In crypt_set_key(), if a failure occurs while replacing the old key
(e.g. tfm->setkey() fails) the key must not have DM_CRYPT_KEY_VALID flag
set.  Otherwise, the crypto layer would have an invalid key that still
has DM_CRYPT_KEY_VALID flag set.

Cc: stable@vger.kernel.org
Signed-off-by: Ondrej Kozina <okozina@redhat.com>
Reviewed-by: Mikulas Patocka <mpatocka@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>

[ Upstream commit 0d808df0 ]

When switching from/to a guest that has a transaction in progress,
we need to save/restore the checkpointed register state.  Although
XER is part of the CPU state that gets checkpointed, the code that
does this saving and restoring doesn't save/restore XER.

This fixes it by saving and restoring the XER.  To allow userspace
to read/write the checkpointed XER value, we also add a new ONE_REG
specifier.

The visible effect of this bug is that the guest may see its XER
value being corrupted when it uses transactions.

Fixes: e4e38121 ("KVM: PPC: Book3S HV: Add transactional memory support")
Fixes: 0a8eccef ("KVM: PPC: Book3S HV: Add missing code for transaction reclaim on guest exit")
Cc: stable@vger.kernel.org # v3.15+
Signed-off-by: Paul Mackerras <paulus@ozlabs.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Paul Mackerras <paulus@ozlabs.org>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>

[ Upstream commit c48ae41b ]

The commit "ext4: sanity check the block and cluster size at mount
time" should prevent any problems, but in case the superblock is
modified while the file system is mounted, add an extra safety check
to make sure we won't overrun the allocated buffer.
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Cc: stable@vger.kernel.org
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>

[ Upstream commit cd6bb35b ]

Centralize the checks for inodes_per_block and be more strict to make
sure the inodes_per_block_group can't end up being zero.
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Reviewed-by: Andreas Dilger <adilger@dilger.ca>
Cc: stable@vger.kernel.org
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>

[ Upstream commit 9e47a4c9 ]

If the block size or cluster size is insane, reject the mount.  This
is important for security reasons (although we shouldn't be just
depending on this check).

Ref: http://www.securityfocus.com/archive/1/539661
Ref: https://bugzilla.redhat.com/show_bug.cgi?id=1332506Reported-by: Borislav Petkov <bp@alien8.de>
Reported-by: Nikolay Borisov <kernel@kyup.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Cc: stable@vger.kernel.org
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>

[ Upstream commit 37be6676 ]

USB-3 does not have any link state that will avoid negotiating a connection
with a plugged-in cable but will signal the host when the cable is
unplugged.

For USB-3 we used to first set the link to Disabled, then to RxDdetect to
be able to detect cable connects or disconnects. But in RxDetect the
connected device is detected again and eventually enabled.

Instead set the link into U3 and disable remote wakeups for the device.
This is what Windows does, and what Alan Stern suggested.

Cc: stable@vger.kernel.org
Cc: Alan Stern <stern@rowland.harvard.edu>
Acked-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>

[ Upstream commit 8052d724 ]

When there is a CRC error in the SPROM read from the device, the code
attempts to handle a fallback SPROM. When this also fails, the driver
returns zero rather than an error code.
Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net>
Cc: Stable <stable@vger.kernel.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>

[ Upstream commit 655c4d44 ]

For NI M Series cards, the Comedi `insn_read` handler for the AI
subdevice is broken due to ANDing the value read from the AI FIFO data
register with an incorrect mask.  The incorrect mask clears all but the
most significant bit of the sample data.  It should preserve all the
sample data bits.  Correct it.

Fixes: 817144ae ("staging: comedi: ni_mio_common: remove unnecessary use of 'board->adbits'")
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Cc: <stable@vger.kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>

[ Upstream commit 30a9d7af ]

The number of 'counters' elements needed in 'struct sg' is
super_block->s_blocksize_bits + 2. Presently we have 16 'counters'
elements in the array. This is insufficient for block sizes >= 32k. In
such cases the memcpy operation performed in ext4_mb_seq_groups_show()
would cause stack memory corruption.

Fixes: c9de560dSigned-off-by: Chandan Rajendra <chandan@linux.vnet.ibm.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Reviewed-by: Jan Kara <jack@suse.cz>
Cc: stable@vger.kernel.org
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>

[ Upstream commit 69e43e8c ]

'border' variable is set to a value of 2 times the block size of the
underlying filesystem. With 64k block size, the resulting value won't
fit into a 16-bit variable. Hence this commit changes the data type of
'border' to 'unsigned int'.

Fixes: c9de560dSigned-off-by: Chandan Rajendra <chandan@linux.vnet.ibm.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Reviewed-by: Andreas Dilger <adilger@dilger.ca>
Cc: stable@vger.kernel.org
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>

[ Upstream commit d128af17 ]

The AEAD givenc descriptor relies on moving the IV through the
output FIFO and then back to the CTX2 for authentication. The
SEQ FIFO STORE could be scheduled before the data can be
read from OFIFO, especially since the SEQ FIFO LOAD needs
to wait for the SEQ FIFO LOAD SKIP to finish first. The
SKIP takes more time when the input is SG than when it's
a contiguous buffer. If the SEQ FIFO LOAD is not scheduled
before the STORE, the DECO will hang waiting for data
to be available in the OFIFO so it can be transferred to C2.
In order to overcome this, first force transfer of IV to C2
by starting the "cryptlen" transfer first and then starting to
store data from OFIFO to the output buffer.

Fixes: 1acebad3 ("crypto: caam - faster aead implementation")
Cc: <stable@vger.kernel.org> # 3.2+
Signed-off-by: Alex Porosanu <alexandru.porosanu@nxp.com>
Signed-off-by: Horia Geantă <horia.geanta@nxp.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>