When we fail to allocate a new block group, we should still do the
checks to make sure allocations try again with the minimum requested
allocation size.

This also fixes a deadlock that come from a missed down_read in
the chunk allocation failure handling.
Signed-off-by: Chris Mason <chris.mason@oracle.com>

This fixes latency problems on metadata reads by making sure they
don't go through the async submit queue, and by tuning down the amount
of readahead done during btree searches.

Also, the btrfs bdi congestion function is tuned to ignore the
number of pending async bios and checksums pending.  There is additional
code that throttles new async bios now and the congestion function
doesn't need to worry about it anymore.
Signed-off-by: Chris Mason <chris.mason@oracle.com>

Simple casting here and there to fix things up.
Signed-off-by: Chris Mason <chris.mason@oracle.com>

btrfs_drop_extents will drop paths and search again when it needs to
force COW of higher nodes.  It was using the key it found during the last
search as the offset for the next search.

But, this wasn't always correct.  The key could be from before our desired
range, and because we're dropping the path, it is possible for file's items
to change while we do the search again.

The fix here is to make sure we don't search for something smaller than
the offset btrfs_drop_extents was called with.
Signed-off-by: Chris Mason <chris.mason@oracle.com>

The allocator wasn't catching all of the cases where it needed to do
extra loops because the check to enforce them wasn't happening early
enough.

When the allocator decided to increase the size of the allocation
for metadata clustering, it wasn't always setting the empty_size to
include the extra (optional) bytes.  This also fixes the empty_size field
to be correct.
Signed-off-by: Chris Mason <chris.mason@oracle.com>

When btrfs unplugs, it tries to find the correct device to unplug
via search through the extent_map tree.  This avoids unplugging
a device that doesn't need it, but is a waste of time for filesystems
with a small number of devices.

This patch checks the total number of devices before doing the
search.
Signed-off-by: Chris Mason <chris.mason@oracle.com>

The extent_io.c code has a #define to find and cleanup extent state leaks
on module unmount.  This adds a very highly contended spinlock to a
hot path for most FS operations.

Turn it off by default.  A later changeset will add a .config option
for it.
Signed-off-by: Chris Mason <chris.mason@oracle.com>

This makes sure the orig_start field in struct extent_map gets set
everywhere the extent_map structs are created or modified.
Signed-off-by: Chris Mason <chris.mason@oracle.com>

With all the recent fixes to the delalloc locking, it is now safe
again to use invalidatepage inside the writepage code for
pages outside of i_size.  This used to deadlock against some of the
code to write locked ranges of pages, but all of that has been fixed.
Signed-off-by: Chris Mason <chris.mason@oracle.com>

The loop searching for free space would exit out too soon when
metadata clustering was trying to allocate a large extent.  This makes
sure a full scan of the free space is done searching for only the
minimum extent size requested by the higher layers.
Signed-off-by: Chris Mason <chris.mason@oracle.com>

Yan's fix to use the correct file offset during compressed reads used the
extent_map struct pointer after it had been freed.  This saves the
fields we want for later use instead.
Signed-off-by: Chris Mason <chris.mason@oracle.com>

The decompress code doesn't take the logical offset in extent
pointer into account. If the logical offset isn't zero, data
will be decompressed into wrong pages.

The solution used here is to record the starting offset of the extent
in the file separately from the logical start of the extent_map struct.
This allows us to avoid problems inserting overlapping extents.
Signed-off-by: Yan Zheng <zheng.yan@oracle.com>

This adds a PageDirty check to the writeback path that locks pages
for delalloc.  If a page wasn't dirty at this point, it is in the
process of being truncated away.
Signed-off-by: Chris Mason <chris.mason@oracle.com>

When metadata allocation clustering has to fall back to unclustered
allocs because large free areas could not be found, it was sometimes
substracting too much from the total bytes to allocate.  This would
make it wrap below zero.
Signed-off-by: Chris Mason <chris.mason@oracle.com>

While doing a commit, btrfs makes sure all the metadata blocks
were properly written to disk, calling wait_on_page_writeback for
each page.  This writeback happens after allowing another transaction
to start, so it competes for the disk with other processes in the FS.

If the page writeback bit is still set, each wait_on_page_writeback might
trigger an unplug, even though the page might be waiting for checksumming
to finish or might be waiting for the async work queue to submit the
bio.

This trades wait_on_page_writeback for waiting on the extent writeback
bits.  It won't trigger any unplugs and substantially improves performance
in a number of workloads.

This also changes the async bio submission to avoid requeueing if there
is only one device.  The requeue just wastes CPU time because there are
no other devices to service.
Signed-off-by: Chris Mason <chris.mason@oracle.com>

In comes cases the empty cluster was added twice to the total number of
bytes the allocator was trying to find.

With empty clustering on, the hint byte was sometimes outside of the
block group.  Add an extra goto to find the correct block group.
Signed-off-by: Chris Mason <chris.mason@oracle.com>

When writing a compressed extent, a number of bios are created that
point to a single struct compressed_bio.  At end_io time an atomic counter in
the compressed_bio struct makes sure that all of the bios have finished
before final end_io processing is done.

But when multiple bios are needed to write a compressed extent, the
counter was being incremented after the first bio was sent to submit_bio.
It is possible the bio will complete before the counter is incremented,
making the end_io handler free the compressed_bio struct before
processing is finished.

The fix is to increment the atomic counter before bio submission,
both for compressed reads and writes.
Signed-off-by: Chris Mason <chris.mason@oracle.com>

This lowers the empty cluster target for metadata allocations.  The lower
target makes it easier to do allocations and still seems to perform well.

It also fixes the allocator loop to drop the empty cluster when things
start getting difficult, avoiding false enospc warnings.
Signed-off-by: Chris Mason <chris.mason@oracle.com>

The allocator uses the last allocation as a starting point for metadata
allocations, and tries to allocate in clusters of at least 256k.

If the search for a free block fails to find the expected block, this patch
forces a new cluster to be found in the free list.
Signed-off-by: Chris Mason <chris.mason@oracle.com>

When reading compressed extents, try to put pages into the page cache
for any pages covered by the compressed extent that readpages didn't already
preload.

Add an async work queue to handle transformations at delayed allocation processing
time.  Right now this is just compression.  The workflow is:

1) Find offsets in the file marked for delayed allocation
2) Lock the pages
3) Lock the state bits
4) Call the async delalloc code

The async delalloc code clears the state lock bits and delalloc bits.  It is
important this happens before the range goes into the work queue because
otherwise it might deadlock with other work queue items that try to lock
those extent bits.

The file pages are compressed, and if the compression doesn't work the
pages are written back directly.

An ordered work queue is used to make sure the inodes are written in the same
order that pdflush or writepages sent them down.

This changes extent_write_cache_pages to let the writepage function
update the wbc nr_written count.
Signed-off-by: Chris Mason <chris.mason@oracle.com>

Btrfs uses kernel threads to create async work queues for cpu intensive
operations such as checksumming and decompression.  These work well,
but they make it difficult to keep IO order intact.

A single writepages call from pdflush or fsync will turn into a number
of bios, and each bio is checksummed in parallel.  Once the checksum is
computed, the bio is sent down to the disk, and since we don't control
the order in which the parallel operations happen, they might go down to
the disk in almost any order.

The code deals with this somewhat by having deep work queues for a single
kernel thread, making it very likely that a single thread will process all
the bios for a single inode.

This patch introduces an explicitly ordered work queue.  As work structs
are placed into the queue they are put onto the tail of a list.  They have
three callbacks:

->func (cpu intensive processing here)
->ordered_func (order sensitive processing here)
->ordered_free (free the work struct, all processing is done)

The work struct has three callbacks.  The func callback does the cpu intensive
work, and when it completes the work struct is marked as done.

Every time a work struct completes, the list is checked to see if the head
is marked as done.  If so the ordered_func callback is used to do the
order sensitive processing and the ordered_free callback is used to do
any cleanup.  Then we loop back and check the head of the list again.

This patch also changes the checksumming code to use the ordered workqueues.
One a 4 drive array, it increases streaming writes from 280MB/s to 350MB/s.
Signed-off-by: Chris Mason <chris.mason@oracle.com>

Signed-off-by: Chris Mason <chris.mason@oracle.com>

Make sure we keep page->mapping NULL on the pages we're getting
via alloc_page.  It gets set so a few of the callbacks can do the right
thing, but in general these pages don't have a mapping.

Don't try to truncate compressed inline items in btrfs_drop_extents.
The whole compressed item must be preserved.

Don't try to create multipage inline compressed items.  When we try to
overwrite just the first page of the file, we would have to read in and recow
all the pages after it in the same compressed inline items.  For now, only
create single page inline items.

Make sure we lock pages in the correct order during delalloc.  The
search into the state tree for delalloc bytes can return bytes before
the page we already have locked.
Signed-off-by: Chris Mason <chris.mason@oracle.com>

This patch updates btrfs-progs for fallocate support.

fallocate is a little different in Btrfs because we need to tell the
COW system that a given preallocated extent doesn't need to be
cow'd as long as there are no snapshots of it.  This leverages the
-o nodatacow checks.
Signed-off-by: Yan Zheng <zheng.yan@oracle.com>

This patch simplifies the nodatacow checker. If all references
were created after the latest snapshot, then we can avoid COW
safely. This patch also updates run_delalloc_nocow to do more
fine-grained checking.
Signed-off-by: Yan Zheng <zheng.yan@oracle.com>

When dropping middle part of an extent, btrfs_drop_extents truncates
the extent at first, then inserts a bookend extent.

Since truncation and insertion can't be done atomically, there is a small
period that the bookend extent isn't in the tree. This causes problem for
functions that search the tree for file extent item. The way to fix this is
lock the range of the bookend extent before truncation.
Signed-off-by: Yan Zheng <zheng.yan@oracle.com>

This patch splits the hole insertion code out of btrfs_setattr
into btrfs_cont_expand and updates btrfs_get_extent to properly
handle the case that file extent items are not continuous.
Signed-off-by: Yan Zheng <zheng.yan@oracle.com>

When compression was on, we were improperly ignoring -o nodatasum.  This
reworks the logic a bit to properly honor all the flags.
Signed-off-by: Chris Mason <chris.mason@oracle.com>

The byte walk counting was awkward and error prone.  This uses the
number of pages sent the higher layer to build bios.
Signed-off-by: Chris Mason <chris.mason@oracle.com>

finish_current_insert and del_pending_extents process extent tree modifications
that build up while we are changing the extent tree.  It is a confusing
bit of code that prevents recursion.

Both functions run through a list of pending operations and both funcs
add to the list of pending operations.  If you have two procs in either
one of them, they can end up looping forever making more work for each other.

This patch makes them walk forward through the list of pending changes instead
of always trying to process the entire list.  At transaction commit
time, we catch any changes that were left over.
Signed-off-by: Chris Mason <chris.mason@oracle.com>

This patch adds transaction IDs to root tree pointers.
Transaction IDs in tree pointers are compared with the
generation numbers in block headers when reading root
blocks of trees. This can detect some types of IO errors.
Signed-off-by: Yan Zheng <zheng.yan@oracle.com>

This patch removes the giant fs_info->alloc_mutex and replaces it with a bunch
of little locks.

There is now a pinned_mutex, which is used when messing with the pinned_extents
extent io tree, and the extent_ins_mutex which is used with the pending_del and
extent_ins extent io trees.

The locking for the extent tree stuff was inspired by a patch that Yan Zheng
wrote to fix a race condition, I cleaned it up some and changed the locking
around a little bit, but the idea remains the same.  Basically instead of
holding the extent_ins_mutex throughout the processing of an extent on the
extent_ins or pending_del trees, we just hold it while we're searching and when
we clear the bits on those trees, and lock the extent for the duration of the
operations on the extent.

Also to keep from getting hung up waiting to lock an extent, I've added a
try_lock_extent so if we cannot lock the extent, move on to the next one in the
tree and we'll come back to that one.  I have tested this heavily and it does
not appear to break anything.  This has to be applied on top of my
find_free_extent redo patch.

I tested this patch on top of Yan's space reblancing code and it worked fine.
The only thing that has changed since the last version is I pulled out all my
debugging stuff, apparently I forgot to run guilt refresh before I sent the
last patch out.  Thank you,
Signed-off-by: Josef Bacik <jbacik@redhat.com>

So there is an odd case where we can possibly return -ENOSPC when there is in
fact space to be had.  It only happens with Metadata writes, and happens _very_
infrequently.  What has to happen is we have to allocate have allocated out of
the first logical byte on the disk, which would set last_alloc to
first_logical_byte(root, 0), so search_start == orig_search_start.  We then
need to allocate for normal metadata, so BTRFS_BLOCK_GROUP_METADATA |
BTRFS_BLOCK_GROUP_DUP.  We will do a block lookup for the given search_start,
block_group_bits() won't match and we'll go to choose another block group.
However because search_start matches orig_search_start we go to see if we can
allocate a chunk.

If we are in the situation that we cannot allocate a chunk, we fail and ENOSPC.
This is kind of a big flaw of the way find_free_extent works, as it along with
find_free_space loop through _all_ of the block groups, not just the ones that
we want to allocate out of.  This patch completely kills find_free_space and
rolls it into find_free_extent.  I've introduced a sort of state machine into
this, which will make it easier to get cache miss information out of the
allocator, and will work well with my locking changes.

The basic flow is this:  We have the variable loop which is 0, meaning we are
in the hint phase.  We lookup the block group for the hint, and lookup the
space_info for what we want to allocate out of.  If the block group we were
pointed at by the hint either isn't of the correct type, or just doesn't have
the space we need, we set head to space_info->block_groups, so we start at the
beginning of the block groups for this particular space info, and loop through.

This is also where we add the empty_cluster to total_needed.  At this point
loop is set to 1 and we just loop through all of the block groups for this
particular space_info looking for the space we need, just as find_free_space
would have done, except we only hit the block groups we want and not _all_ of
the block groups.  If we come full circle we see if we can allocate a chunk.
If we cannot of course we exit with -ENOSPC and we are good.  If not we start
over at space_info->block_groups and loop through again, with loop == 2.  If we
come full circle and haven't found what we need then we exit with -ENOSPC.
I've been running this for a couple of days now and it seems stable, and I
haven't yet hit a -ENOSPC when there was plenty of space left.

Also I've made a groups_sem to handle the group list for the space_info.  This
is part of my locking changes, but is relatively safe and seems better than
holding the space_info spinlock over that entire search time.  Thanks,
Signed-off-by: Josef Bacik <jbacik@redhat.com>
 

This patch improves the space balancing code to keep more sharing
of tree blocks. The only case that breaks sharing of tree blocks is
data extents get fragmented during balancing. The main changes in
this patch are:

Add a 'drop sub-tree' function. This solves the problem in old code
that BTRFS_HEADER_FLAG_WRITTEN check breaks sharing of tree block.

Remove relocation mapping tree. Relocation mappings are stored in
struct btrfs_ref_path and updated dynamically during walking up/down
the reference path. This reduces CPU usage and simplifies code.

This patch also fixes a bug. Root items for reloc trees should be
updated in btrfs_free_reloc_root.
Signed-off-by: Yan Zheng <zheng.yan@oracle.com>

This is a large change for adding compression on reading and writing,
both for inline and regular extents.  It does some fairly large
surgery to the writeback paths.

Compression is off by default and enabled by mount -o compress.  Even
when the -o compress mount option is not used, it is possible to read
compressed extents off the disk.

If compression for a given set of pages fails to make them smaller, the
file is flagged to avoid future compression attempts later.

* While finding delalloc extents, the pages are locked before being sent down
to the delalloc handler.  This allows the delalloc handler to do complex things
such as cleaning the pages, marking them writeback and starting IO on their
behalf.

* Inline extents are inserted at delalloc time now.  This allows us to compress
the data before inserting the inline extent, and it allows us to insert
an inline extent that spans multiple pages.

* All of the in-memory extent representations (extent_map.c, ordered-data.c etc)
are changed to record both an in-memory size and an on disk size, as well
as a flag for compression.

From a disk format point of view, the extent pointers in the file are changed
to record the on disk size of a given extent and some encoding flags.
Space in the disk format is allocated for compression encoding, as well
as encryption and a generic 'other' field.  Neither the encryption or the
'other' field are currently used.

In order to limit the amount of data read for a single random read in the
file, the size of a compressed extent is limited to 128k.  This is a
software only limit, the disk format supports u64 sized compressed extents.

In order to limit the ram consumed while processing extents, the uncompressed
size of a compressed extent is limited to 256k.  This is a software only limit
and will be subject to tuning later.

Checksumming is still done on compressed extents, and it is done on the
uncompressed version of the data.  This way additional encodings can be
layered on without having to figure out which encoding to checksum.

Compression happens at delalloc time, which is basically singled threaded because
it is usually done by a single pdflush thread.  This makes it tricky to
spread the compression load across all the cpus on the box.  We'll have to
look at parallel pdflush walks of dirty inodes at a later time.

Decompression is hooked into readpages and it does spread across CPUs nicely.
Signed-off-by: Chris Mason <chris.mason@oracle.com>

Merge branch 'master' of ssh://mason@master.kernel.org/pub/scm/linux/kernel/git/mason/btrfs-unstable

Sometimes we end up freeing a reserved extent because we don't need it, however
this means that its possible for transaction->last_alloc to point to the middle
of a free area.

When we search for free space in find_free_space we do a tree_search_offset
with contains set to 0, because we want it to find the next best free area if
we do not have an offset starting on the given offset.

Unfortunately that currently means that if the offset we were given as a hint
points to the middle of a free area, we won't find anything.  This is especially
bad if we happened to last allocate from the big huge chunk of a newly formed
block group, since we won't find anything and have to go back and search the
long way around.

This fixes this problem by making it so that we return the free space area
regardless of the contains variable.  This made cache missing happen _alot_
less, and speeds things up considerably.
Signed-off-by: Josef Bacik <jbacik@redhat.com>

Subvol creation already requires privs, and security_inode_mkdir isn't
exported.  For now we don't need it.
Signed-off-by: Chris Mason <chris.mason@oracle.com>