- 15 Feb, 2020 3 commits
-
-
Sam Ravnborg authored
struct drm_encoder_helper_funcs included a callback named drm_crtc. There are no users left - so drop it. There was one reference in drm_crtc_helper.c, which checked if the value was not NULL. As it was never assigned this check could be dropped. Signed-off-by:
Sam Ravnborg <sam@ravnborg.org> Reviewed-by:
Daniel Vetter <daniel.vetter@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/msgid/20200215173342.GA7458@ravnborg.org
-
Sam Ravnborg authored
Drop a few indirections, making the code simpler. This also drops a RATELIMITED variant that is not in use. Signed-off-by:
-
Daniel Vetter authored
Just a tiny copypasta mistake. Fixes: 75146591 ("drm/bridge: Add a drm_bridge_state object") Cc: Boris Brezillon <boris.brezillon@collabora.com> Acked-by:
Boris Brezillon <boris.brezillon@collabora.com> Cc: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by:
Daniel Vetter <daniel.vetter@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200214081340.2772853-1-daniel.vetter@ffwll.ch
-
- 14 Feb, 2020 13 commits
-
-
Ville Syrjälä authored
I don't understand what the DispID CEA data block revision means. The spec doesn't say. I guess some DispID must have a value of >= 3 in there or else we generally wouldn't even parse the CEA data blocks. Or does all this code actually not do anything? Cc: Andres Rodriguez <andresx7@gmail.com> Signed-off-by:
Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200124200231.10517-6-ville.syrjala@linux.intel.comReviewed-by:
Andres Rodriguez <andresx7@gmail.com> Reviewed-by:
Uma Shankar <uma.shankar@intel.com>
-
Ville Syrjälä authored
After much head scratching I managed to convince myself that for_each_displayid_db() has already done the bounds checks for the DispID CEA data block. Which is why we don't need to repeat them in cea_db_offsets(). To avoid having to go through that pain again in the future add a comment which explains this fact. Cc: Andres Rodriguez <andresx7@gmail.com> Signed-off-by:
Alex Deucher <alexander.deucher@amd.com> Reviewed-by:
-
Ville Syrjälä authored
Nuke some whitespace that shouldn't be there. Signed-off-by:
-
Ville Syrjälä authored
Let's introduce is_detailed_timing_descritor() as the opposite counterpart of is_display_descriptor(). Cc: Allen Chen <allen.chen@ite.com.tw> Signed-off-by:
-
Ville Syrjälä authored
Currently we assume any 18 byte descriptor to be a display descritor if only the tag byte matches the expected value. But for detailed timing descriptors that same byte is just the lower 8 bits of hblank, and as such can match any display descriptor tag. To properly validate that the 18 byte descriptor is in fact a display descriptor we must also examine bytes 0-2 (just byte 1 should actually suffice but the spec does say that bytes 0 and 2 must also always be zero for display descriptors so we check those too). Unlike Allen's original proposed patch to just fix is_rb() we roll this out across the board to fix everything. Cc: Allen Chen <allen.chen@ite.com.tw> Signed-off-by:
-
Ville Syrjälä authored
CEA-861 says : "d = offset for the byte following the reserved data block. If no data is provided in the reserved data block, then d=4. If no DTDs are provided, then d=0." So let's not look for DTDs when d==0. In fact let's just make that <4 since those values would just mean that he DTDs overlap the block header. And let's also check that d isn't so big as to declare the descriptors to live past the block end, although the code does already survive that case as we'd just end up with a negative number of descriptors and the loop would not do anything. Cc: Allen Chen <allen.chen@ite.com.tw> Signed-off-by:
-
Jonathan Neuschäfer authored
- Format the pipe diagram as a monospace block. - Fix formatting of the list. Without the empty line, the first dash is not parsed as a bullet point. Signed-off-by:
Jonathan Neuschäfer <j.neuschaefer@gmx.net> Signed-off-by:
-
Daniel Vetter authored
We want to go over to the new lowercase ones, encourage that a bit more. v2: Remove the accidentally included hunk from some WIP branch this was based on (Jani&Sam). Cc: Jani Nikula <jani.nikula@intel.com> Acked-by:
Jani Nikula <jani.nikula@intel.com> Reviewed-by:
-
Samuel Holland authored
The driver currently uses runtime PM to perform some of the module initialization and cleanup. This has three problems: 1) There is no Kconfig dependency on CONFIG_PM, so if runtime PM is disabled, the driver will not work at all, since the module will never be initialized. 2) The driver does not ensure that the device is suspended when sun6i_dsi_probe() fails or when sun6i_dsi_remove() is called. It simply disables runtime PM. From the docs of pm_runtime_disable(): The device can be either active or suspended after its runtime PM has been disabled. And indeed, the device will likely still be active if sun6i_dsi_probe fails. For example, if the panel driver is not yet loaded, we have the following sequence: sun6i_dsi_probe() pm_runtime_enable() mipi_dsi_host_register() of_mipi_dsi_device_add(child) ...device_add()... __device_attach() pm_runtime_get_sync(dev->parent) -> Causes resume bus_for_each_drv() __device_attach_driver() -> No match for panel pm_runtime_put(dev->parent) -> Async idle request component_add() __component_add() try_to_bring_up_masters() try_to_bring_up_master() sun4i_drv_bind() component_bind_all() component_bind() sun6i_dsi_bind() -> Fails with -EPROBE_DEFER mipi_dsi_host_unregister() pm_runtime_disable() __pm_runtime_disable() __pm_runtime_barrier() -> Idle request is still pending cancel_work_sync() -> DSI host is *not* suspended! Since the device is not suspended, the clock and regulator are never disabled. The imbalance causes a WARN at devres free time. 3) The driver relies on being suspended when sun6i_dsi_encoder_enable() is called. The resume callback has a comment that says: Some part of it can only be done once we get a number of lanes, see sun6i_dsi_inst_init And then part of the resume callback only runs if dsi->device is not NULL (that is, if sun6i_dsi_attach() has been called). However, as the above call graph shows, the resume callback is guaranteed to be called before sun6i_dsi_attach(); it is called before child devices get their drivers attached. Therefore, part of the controller initialization will only run if the device is suspended between the calls to mipi_dsi_host_register() and component_add() (which ends up calling sun6i_dsi_encoder_enable()). Again, as shown by the above call graph, this is not the case. It appears that the controller happens to work because it is still initialized by the bootloader. Because the connector is hardcoded to always be connected, the device's runtime PM reference is not dropped until system suspend, when sun4i_drv_drm_sys_suspend() ends up calling sun6i_dsi_encoder_disable(). However, that is done as a system sleep PM hook, and at that point the system PM core has already taken another runtime PM reference, so sun6i_dsi_runtime_suspend() is not called. Likewise, by the time the PM core releases its reference, sun4i_drv_drm_sys_resume() has already re-enabled the encoder. So after system suspend and resume, we have *still never called* sun6i_dsi_inst_init(), and now that the rest of the display pipeline has been reset, the DSI host is unable to communicate with the panel, causing VBLANK timeouts. Fix all of these issues by inlining the runtime PM hooks into the encoder enable/disable functions, which are guaranteed to run after a panel is attached. This allows sun6i_dsi_inst_init() to be called unconditionally. Furthermore, this causes the hardware to be turned off during system suspend and reinitialized on resume, which was not happening before. Fixes: 133add5b ("drm/sun4i: Add Allwinner A31 MIPI-DSI controller support") Signed-off-by:Samuel Holland <samuel@sholland.org> Signed-off-by:
Maxime Ripard <maxime@cerno.tech> Link: https://patchwork.freedesktop.org/patch/msgid/20200211072858.30784-4-samuel@sholland.org
-
Samuel Holland authored
Currently, the DSI host blocks binding the display pipeline until the panel is available. This unnecessarily prevents other display outpus from working, and adds logspam to dmesg when the panel driver is built as a module (the component master is unsuccessfully brought up several times during boot). Flip the dependency, instead requiring the host to be bound before the panel is attached. The panel driver provides no functionality outside of the display pipeline anyway. Since the panel is now probed after the DRM connector, we need a hotplug event to turn on the connector after the panel is attached. This has the added benefit of fixing panel module removal/insertion. Previously, the panel would be turned off when its module was removed. But because the connector state was hardcoded, nothing knew to turn the panel back on when it was re-attached. Now, with hotplug events available, the connector state will follow the panel module state, and the panel will be re-enabled properly. Fixes: 133add5b ("drm/sun4i: Add Allwinner A31 MIPI-DSI controller support") Signed-off-by:
-
Samuel Holland authored
The continued use of an ERR_PTR to signify "no panel" outside of sun6i_dsi_attach is confusing because it is a double negative. Because the connector always reports itself as connected, there is also the possibility of sending an ERR_PTR to drm_panel_get_modes(), which would crash. Solve both of these by only storing the panel pointer if it is valid. Fixes: 133add5b ("drm/sun4i: Add Allwinner A31 MIPI-DSI controller support") Signed-off-by:
-
Samuel Holland authored
This member is never used, so remove it. Fixes: 133add5b ("drm/sun4i: Add Allwinner A31 MIPI-DSI controller support") Signed-off-by:
-
Gerd Hoffmann authored
The >= compare op must happen in cpu byte order, doing it in little endian fails on big endian machines like s390. Reported-by:
Sebastian Mitterle <smitterl@redhat.com> Signed-off-by:
Gerd Hoffmann <kraxel@redhat.com> Reviewed-by:
Cornelia Huck <cohuck@redhat.com> Link: http://patchwork.freedesktop.org/patch/msgid/20200214080100.1273-1-kraxel@redhat.com
-
- 13 Feb, 2020 24 commits
-
-
Jerry (Fangzhi) Zuo authored
Unlike DP 1.2 edid corruption test, DP 1.4 requires to calculate real CRC value of the last edid data block, and write it back. Current edid CRC calculates routine adds the last CRC byte, and check if non-zero. This behavior is not accurate; actually, we need to return the actual CRC value when corruption is detected. This commit changes this issue by returning the calculated CRC, and initiate the required sequence. Change since v7 - Fix for CI.CHECKPATCH Change since v6 - Add return check Change since v5 - Obtain real CRC value before dumping bad edid Change since v4 - Fix for CI.CHECKPATCH Change since v3 - Fix a minor typo. Change since v2 - Rewrite checksum computation routine to avoid duplicated code. - Rename to avoid confusion. Change since v1 - Have separate routine for returning real CRC. Signed-off-by:
Jerry (Fangzhi) Zuo <Jerry.Zuo@amd.com> Reviewed-by:
Harry Wentland <harry.wentland@amd.com> Reviewed-by:
Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by:
Rodrigo Siqueira <rodrigosiqueiramelo@gmail.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200211160832.24259-1-Jerry.Zuo@amd.com
-
Thomas Zimmermann authored
The legacy version of get_scanout_position() was only useful while drivers still used drm_driver.get_scanout_position(). With no such drivers left, the related typedef and code can be removed Signed-off-by:
Thomas Zimmermann <tzimmermann@suse.de> Reviewed-by:
-
Thomas Zimmermann authored
All non-legacy users of VBLANK functions in struct drm_driver have been converted to use the respective interfaces in struct drm_crtc_funcs. The remaining users of VBLANK callbacks in struct drm_driver are legacy drivers with userspace modesetting. All users of struct drm_driver.get_scanout_position() have been converted to the respective CRTC helper function. Remove the callback from struct drm_driver. There are no users left of get_vblank_timestamp(), so the callback is being removed. The other VBLANK callbacks are being moved to the legacy section at the end of struct drm_driver. Also removed is drm_calc_vbltimestamp_from_scanoutpos(). Callers of this function have been converted to use the CRTC instead. v4: * more readable code for setting high_prec (Ville, Jani) v2: * merge with removal of struct drm_driver.get_scanout_position() * remove drm_calc_vbltimestamp_from_scanoutpos() Signed-off-by:
Yannick Fertré <yannick.fertre@st.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200123135943.24140-22-tzimmermann@suse.de
-
Thomas Zimmermann authored
VBLANK callbacks in struct drm_driver are deprecated in favor of their equivalents in struct drm_crtc_funcs. Convert vmwgfx over. v2: * remove accidental whitespace fixes Signed-off-by:
Thomas Hellstrom <thellstrom@vmware.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200123135943.24140-21-tzimmermann@suse.de
-
Thomas Zimmermann authored
VBLANK callbacks in struct drm_driver are deprecated in favor of their equivalents in struct drm_crtc_funcs. Convert vkms over. Signed-off-by:
Rodrigo Siqueira <rodrigosiqueira@gmail.com> Tested-by:
-
Thomas Zimmermann authored
VBLANK callbacks in struct drm_driver are deprecated in favor of their equivalents in struct drm_crtc_funcs. Convert vc4 over. Signed-off-by:
Eric Anholt <eric@anholt.net> Link: https://patchwork.freedesktop.org/patch/msgid/20200123135943.24140-19-tzimmermann@suse.de
-
Thomas Zimmermann authored
The callback struct drm_driver.get_scanout_position() is deprecated in favor of struct drm_crtc_helper_funcs.get_scanout_position(). Convert vc4 over. Signed-off-by:
-
Thomas Zimmermann authored
VBLANK callbacks in struct drm_driver are deprecated in favor of their equivalents in struct drm_crtc_funcs. Convert sti over. v2: * remove unnecessary include of sti_crtc.h from sti_drv.c Signed-off-by:
Benjamin Gaignard <benjamin.gaignard@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/20200123135943.24140-17-tzimmermann@suse.de
-
Thomas Zimmermann authored
VBLANK callbacks in struct drm_driver are deprecated in favor of their equivalents in struct drm_crtc_funcs. Convert stm over. Signed-off-by:
Philippe Cornu <philippe.cornu@st.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200123135943.24140-16-tzimmermann@suse.de
-
Thomas Zimmermann authored
The callback struct drm_driver.get_scanout_position() is deprecated in favor of struct drm_crtc_helper_funcs.get_scanout_position(). Convert stm over. Signed-off-by:
-
Thomas Zimmermann authored
VBLANK callbacks in struct drm_driver are deprecated in favor of their equivalents in struct drm_crtc_funcs. Convert msm over. Signed-off-by:
Rob Clark <robdclark@gmail.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200123135943.24140-14-tzimmermann@suse.de
-
Thomas Zimmermann authored
The callback struct drm_driver.get_scanout_position() is deprecated in favor of struct drm_crtc_helper_funcs.get_scanout_position(). Convert msm over. Signed-off-by:
-
Thomas Zimmermann authored
VBLANK callbacks in struct drm_driver are deprecated in favor of their equivalents in struct drm_crtc_funcs. Convert radeon over. Signed-off-by:
-
Thomas Zimmermann authored
The callback struct drm_driver.get_scanout_position() is deprecated in favor of struct drm_crtc_helper_funcs.get_scanout_position(). Convert radeon over. v4: * 80-character line fixes Signed-off-by:
-
Thomas Zimmermann authored
VBLANK callbacks in struct drm_driver are deprecated in favor of their equivalents in struct drm_crtc_funcs. Convert nouvean over. v4: * add argument names in function declaration Signed-off-by:
-
Thomas Zimmermann authored
The callback struct drm_driver.get_scanout_position() is deprecated in favor of struct drm_crtc_helper_funcs.get_scanout_position(). Convert nouveau over. v4: * add argument names in function declaration Signed-off-by:
Ben Skeggs <bskeggs@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200123135943.24140-9-tzimmermann@suse.de
-
Thomas Zimmermann authored
VBLANK callbacks in struct drm_driver are deprecated in favor of their equivalents in struct drm_crtc_funcs. Convert i915 over. The callback struct drm_driver.get_scanout_position() is deprecated in favor of struct drm_crtc_helper_funcs.get_scanout_position(). i915 doesn't use CRTC helpers. Instead pass i915's implementation of get_scanout_position() to DRM core's drm_crtc_vblank_helper_get_vblank_timestamp_internal(). v3: * rename dcrtc to _crtc * use intel_ prefix for i915_crtc_get_vblank_timestamp() * update for drm_crtc_vblank_helper_get_vblank_timestamp_internal() v2: * use DRM's implementation of get_vblank_timestamp() * simplify function names Signed-off-by:
-
Thomas Zimmermann authored
VBLANK callbacks in struct drm_driver are deprecated in favor of their equivalents in struct drm_crtc_funcs. Convert gma500 over. Signed-off-by:
Patrik Jakobsson <patrik.r.jakobsson@gmail.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200123135943.24140-7-tzimmermann@suse.de
-
Thomas Zimmermann authored
VBLANK callbacks in struct drm_driver are deprecated in favor of their equivalents in struct drm_crtc_funcs. Convert amdgpu over. v2: * don't wrap existing functions; change signature instead Signed-off-by:
-
Thomas Zimmermann authored
The callback struct drm_driver.get_scanout_position() is deprecated in favor of struct drm_crtc_helper_funcs.get_scanout_position(). Convert amdgpu over. Signed-off-by:
-
Thomas Zimmermann authored
The callback get_vblank_timestamp() is currently located in struct drm_driver, but really belongs into struct drm_crtc_funcs. Add an equivalent there. Driver will be converted in separate patches. The default implementation is drm_calc_vbltimestamp_from_scanoutpos(). The patch adds drm_crtc_vblank_helper_get_vblank_timestamp(), which is an implementation for the CRTC callback. v4: * more readable code for setting high_prec (Ville, Jani) v3: * use refactored timestamp calculation to minimize duplicated code * do more checks for crtc != NULL to support legacy drivers v2: * rename helper to drm_crtc_vblank_helper_get_vblank_timestamp() * replace drm_calc_vbltimestamp_from_scanoutpos() with drm_crtc_vblank_helper_get_vblank_timestamp() in docs Signed-off-by:
-
Thomas Zimmermann authored
The new callback get_scanout_position() reads the current location of the scanout process. The operation is currently located in struct drm_driver, but really belongs to the CRTC. Drivers will be converted in separate patches. To help with the conversion, the timestamp calculation has been moved from drm_calc_vbltimestamp_from_scanoutpos() to drm_crtc_vblank_helper_get_vblank_timestamp_internal(). The helper function supports the new and old interface of get_scanout_position(). drm_calc_vbltimestamp_from_scanoutpos() remains as a wrapper around the new function. Callback functions return the scanout position from the CRTC. The legacy version of the interface receives the device and pipe index, the modern version receives a pointer to the CRTC. We keep the legacy version until all drivers have been converted. v4: * 80-character line fixes v3: * refactor drm_calc_vbltimestamp_from_scanoutpos() to minimize code duplication * define types for get_scanout_position() callbacks v2: * fix logical op in drm_calc_vbltimestamp_from_scanoutpos() Signed-off-by:
-
Thomas Zimmermann authored
VBLANK interrupts can be disabled immediately or with a delay, where the latter is the default. The former option can be selected by setting get_vblank_timestamp and enabling vblank_disable_immediate in struct drm_device. Simplify the code in preparation of the removal of struct drm_device.get_vblank_timestamp. v3: * remove internal setup of vblank_disable_immediate Signed-off-by:
-
Gerd Hoffmann authored
Add missing virtio_gpu_array_lock_resv() call. Signed-off-by:
Chia-I Wu <olvaffe@gmail.com> Link: http://patchwork.freedesktop.org/patch/msgid/20200211135047.22261-3-kraxel@redhat.com
-
