- 25 Jan, 2020 8 commits
-
-
David S. Miller authored
Haiyang Zhang says: ==================== hv_netvsc: Add XDP support Add XDP support and update related document. ==================== Signed-off-by:David S. Miller <davem@davemloft.net>
-
Haiyang Zhang authored
Added the new section in the document regarding XDP support by hv_netvsc driver. Signed-off-by:
Haiyang Zhang <haiyangz@microsoft.com> Signed-off-by:
-
Haiyang Zhang authored
This patch adds support of XDP in native mode for hv_netvsc driver, and transparently sets the XDP program on the associated VF NIC as well. Setting / unsetting XDP program on synthetic NIC (netvsc) propagates to VF NIC automatically. Setting / unsetting XDP program on VF NIC directly is not recommended, also not propagated to synthetic NIC, and may be overwritten by setting of synthetic NIC. The Azure/Hyper-V synthetic NIC receive buffer doesn't provide headroom for XDP. We thought about re-use the RNDIS header space, but it's too small. So we decided to copy the packets to a page buffer for XDP. And, most of our VMs on Azure have Accelerated Network (SRIOV) enabled, so most of the packets run on VF NIC. The synthetic NIC is considered as a fallback data-path. So the data copy on netvsc won't impact performance significantly. XDP program cannot run with LRO (RSC) enabled, so you need to disable LRO before running XDP: ethtool -K eth0 lro off XDP actions not yet supported: XDP_REDIRECT Signed-off-by: -
Moshe Shemesh authored
Devlink health recover notifications were added only on driver direct updates of health_state through devlink_health_reporter_state_update(). Add notifications on updates of health_state by devlink flows of report and recover. Moved functions devlink_nl_health_reporter_fill() and devlink_recover_notify() to avoid forward declaration. Fixes: 97ff3bd3 ("devlink: add devink notification when reporter update health state") Signed-off-by:
Moshe Shemesh <moshe@mellanox.com> Signed-off-by:
-
Andy Shevchenko authored
Use the print_hex_dump() helper, instead of open-coding the same operations. Signed-off-by:
Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by:
-
Andy Shevchenko authored
Use %*ph format to print small buffer as hex string. Signed-off-by:
-
Mat Martineau authored
checkpatch.pl had a few complaints in the last set of MPTCP patches: ERROR: code indent should use tabs where possible +^I subflow, sk->sk_family, icsk->icsk_af_ops, target, mapped);$ CHECK: Comparison to NULL could be written "!new_ctx" + if (new_ctx == NULL) { ERROR: "foo * bar" should be "foo *bar" +static const struct proto_ops * tcp_proto_ops(struct sock *sk) Signed-off-by:Mat Martineau <mathew.j.martineau@linux.intel.com> Signed-off-by:
-
Florian Westphal authored
We need to initialise the struct ourselves, else we expose tcp-specific callbacks such as tcp_splice_read which will then trigger splat because the socket is an mptcp one: BUG: KASAN: slab-out-of-bounds in tcp_mstamp_refresh+0x80/0xa0 net/ipv4/tcp_output.c:57 Write of size 8 at addr ffff888116aa21d0 by task syz-executor.0/5478 CPU: 1 PID: 5478 Comm: syz-executor.0 Not tainted 5.5.0-rc6 #3 Call Trace: tcp_mstamp_refresh+0x80/0xa0 net/ipv4/tcp_output.c:57 tcp_rcv_space_adjust+0x72/0x7f0 net/ipv4/tcp_input.c:612 tcp_read_sock+0x622/0x990 net/ipv4/tcp.c:1674 tcp_splice_read+0x20b/0xb40 net/ipv4/tcp.c:791 do_splice+0x1259/0x1560 fs/splice.c:1205 To prevent build error with ipv6, add the recv/sendmsg function declaration to ipv6.h. The functions are already accessible "thanks" to retpoline related work, but they are currently only made visible by socket.c specific INDIRECT_CALLABLE macros. Reported-by:
Christoph Paasch <cpaasch@apple.com> Signed-off-by:
Florian Westphal <fw@strlen.de> Signed-off-by:
-
- 24 Jan, 2020 25 commits
-
-
David S. Miller authored
Christoph Paasch says: ==================== Multipath TCP part 2: Single subflow & RFC8684 support v2 -> v3: Added RFC8684-style handshake (see below fore more details) and some minor fixes v1 -> v2: Rebased on latest "Multipath TCP: Prerequisites" v3 series This set adds MPTCP connection establishment, writing & reading MPTCP options on data packets, a sysctl to allow MPTCP per-namespace, and self tests. This is sufficient to establish and maintain a connection with a MPTCP peer, but will not yet allow or initiate establishment of additional MPTCP subflows. We also add the necessary code for the RFC8684-style handshake. RFC8684 obsoletes the experimental RFC6824 and makes MPTCP move-on to version 1. Originally our plan was to submit single-subflow and RFC8684 support in two patchsets, but to simplify the merging-process and ensure that a coherent MPTCP-version lands in Linux we decided to merge the two sets into a single one. The MPTCP patchset exclusively supports RFC 8684. Although all MPTCP deployments are currently based on RFC 6824, future deployments will be migrating to MPTCP version 1. 3GPP's 5G standardization also solely supports RFC 8684. In addition, we believe that this initial submission of MPTCP will be cleaner by solely supporting RFC 8684. If later on support for the old MPTCP-version is required it can always be added in the future. The major difference between RFC 8684 and RFC 6824 is that it has a better support for servers using TCP SYN-cookies by reliably retransmitting the MP_CAPABLE option. Before ending this cover letter with some refs, it is worth mentioning that we promise David Miller that merging this series will be rewarded by Twitter dopamine hits :-D Clone/fetch: https://github.com/multipath-tcp/mptcp_net-next.git (tag: netdev-v3-part2) Browse: https://github.com/multipath-tcp/mptcp_net-next/tree/netdev-v3-part2 Thank you for your review. You can find us at mptcp@lists.01.org and https://is.gd/mptcp_upstream ==================== Signed-off-by:
-
Paolo Abeni authored
With MPTCP v1, passive connections can fallback to TCP after the subflow becomes established: syn + MP_CAPABLE -> <- syn, ack + MP_CAPABLE ack, seq = 3 -> // OoO packet is accepted because in-sequence // passive socket is created, is in ESTABLISHED // status and tentatively as MP_CAPABLE ack, seq = 2 -> // no MP_CAPABLE opt, subflow should fallback to TCP We can't use the 'subflow' socket fallback, as we don't have it available for passive connection. Instead, when the fallback is detected, replace the mptcp socket with the underlying TCP subflow. Beyond covering the above scenario, it makes a TCP fallback socket as efficient as plain TCP ones. Co-developed-by:Paolo Abeni <pabeni@redhat.com> Signed-off-by:
-
Christoph Paasch authored
This patch implements the handling of MP_CAPABLE + data option, as per RFC 6824 bis / RFC 8684: MPTCP v1. On the server side we can receive the remote key after that the connection is established. We need to explicitly track the 'missing remote key' status and avoid emitting a mptcp ack until we get such info. When a late/retransmitted/OoO pkt carrying MP_CAPABLE[+data] option is received, we have to propagate the mptcp seq number info to the msk socket. To avoid ABBA locking issue, explicitly check for that in recvmsg(), where we own msk and subflow sock locks. The above also means that an established mp_capable subflow - still waiting for the remote key - can be 'downgraded' to plain TCP. Such change could potentially block a reader waiting for new data forever - as they hook to msk, while later wake-up after the downgrade will be on subflow only. The above issue is not handled here, we likely have to get rid of msk->fallback to handle that cleanly. Signed-off-by:
-
Christoph Paasch authored
This implements MP_CAPABLE options parsing and writing according to RFC 6824 bis / RFC 8684: MPTCP v1. Local key is sent on syn/ack, and both keys are sent on 3rd ack. MP_CAPABLE messages len are updated accordingly. We need the skbuff to correctly emit the above, so we push the skbuff struct as an argument all the way from tcp code to the relevant mptcp callbacks. When processing incoming MP_CAPABLE + data, build a full blown DSS-like map info, to simplify later processing. On child socket creation, we need to record the remote key, if available. Signed-off-by:
-
Paolo Abeni authored
For simplicity's sake use directly sha256 primitives (and pull them as a required build dep). Add optional, boot-time self-tests for the hmac function. Signed-off-by:
-
Florian Westphal authored
Add mptcp_connect tool: xmit two files back and forth between two processes, several net namespaces including some adding delays, losses and reordering. Wrapper script tests that data was transmitted without corruption. The "-c" command line option for mptcp_connect.sh is there for debugging: The script will use tcpdump to create one .pcap file per test case, named according to the namespaces, protocols, and connect address in use. For example, the first test case writes the capture to ns1-ns1-MPTCP-MPTCP-10.0.1.1.pcap. The stderr output from tcpdump is printed after the test completes to show tcpdump's "packets dropped by kernel" information. Also check that userspace can't create MPTCP sockets when mptcp.enabled sysctl is off. The "-b" option allows to tune/lower send buffer size. "-m mmap" can be used to test blocking io. Default is non-blocking io using read/write/poll. Will run automatically on "make kselftest". Note that the default timeout of 45 seconds is used even if there is a "settings" changing it to 450. 45 seconds should be enough in most cases but this depends on the machine running the tests. A fix to correctly read the "settings" file has been proposed upstream but not applied yet. It is not blocking the execution of these new tests but it would be nice to have it: https://patchwork.kernel.org/patch/11204935/Co-developed-by:
Matthieu Baerts <matthieu.baerts@tessares.net> Signed-off-by:
Davide Caratti <dcaratti@redhat.com> Signed-off-by:
-
Matthieu Baerts authored
New MPTCP sockets will return -ENOPROTOOPT if MPTCP support is disabled for the current net namespace. We are providing here a way to control access to the feature for those that need to turn it on or off. The value of this new sysctl can be different per namespace. We can then restrict the usage of MPTCP to the selected NS. In case of serious issues with MPTCP, administrators can now easily turn MPTCP off. Co-developed-by:
Peter Krystad <peter.krystad@linux.intel.com> Signed-off-by:
-
Paolo Abeni authored
If the current sendmsg() lands on the same subflow we used last, we can try to collapse the data. Signed-off-by:
-
Paolo Abeni authored
With the previous patch in place, the msk can detect which subflow has the current map with a simple walk, let's update the main loop to always select the 'current' subflow. The exit conditions now closely mirror tcp_recvmsg() to get expected timeout and signal behavior. Co-developed-by:
-
Florian Westphal authored
Add new SEND_SPACE flag to indicate that a subflow has enough space to accept more data for transmission. It gets cleared at the end of mptcp_sendmsg() in case ssk has run below the free watermark. It is (re-set) from the wspace callback. This allows us to use msk->flags to determine the poll mask. Co-developed-by:
-
Mat Martineau authored
Parses incoming DSS options and populates outgoing MPTCP ACK fields. MPTCP fields are parsed from the TCP option header and placed in an skb extension, allowing the upper MPTCP layer to access MPTCP options after the skb has gone through the TCP stack. The subflow implements its own data_ready() ops, which ensures that the pending data is in sequence - according to MPTCP seq number - dropping out-of-seq skbs. The DATA_READY bit flag is set if this is the case. This allows the MPTCP socket layer to determine if more data is available without having to consult the individual subflows. It additionally validates the current mapping and propagates EoF events to the connection socket. Co-developed-by:
-
Mat Martineau authored
Per-packet metadata required to write the MPTCP DSS option is written to the skb_ext area. One write to the socket may contain more than one packet of data, which is copied to page fragments and mapped in to MPTCP DSS segments with size determined by the available page fragments and the maximum mapping length allowed by the MPTCP specification. If do_tcp_sendpages() splits a DSS segment in to multiple skbs, that's ok - the later skbs can either have duplicated DSS mapping information or none at all, and the receiver can handle that. The current implementation uses the subflow frag cache and tcp sendpages to avoid excessive code duplication. More work is required to ensure that it works correctly under memory pressure and to support MPTCP-level retransmissions. The MPTCP DSS checksum is not yet implemented. Co-developed-by:
-
Peter Krystad authored
set/getsockopt behaviour with multiple subflows is undefined. Therefore, for now, we return -EOPNOTSUPP unless we're in fallback mode. Co-developed-by:
-
Peter Krystad authored
Call shutdown on all subflows in use on the given socket, or on the fallback socket. Co-developed-by:
-
Peter Krystad authored
Generate the local keys, IDSN, and token when creating a new socket. Introduce the token tree to track all tokens in use using a radix tree with the MPTCP token itself as the index. Override the rebuild_header callback in inet_connection_sock_af_ops for creating the local key on a new outgoing connection. Override the init_req callback of tcp_request_sock_ops for creating the local key on a new incoming connection. Will be used to obtain the MPTCP parent socket to handle incoming joins. Co-developed-by:
-
Peter Krystad authored
Add subflow_request_sock type that extends tcp_request_sock and add an is_mptcp flag to tcp_request_sock distinguish them. Override the listen() and accept() methods of the MPTCP socket proto_ops so they may act on the subflow socket. Override the conn_request() and syn_recv_sock() handlers in the inet_connection_sock to handle incoming MPTCP SYNs and the ACK to the response SYN. Add handling in tcp_output.c to add MP_CAPABLE to an outgoing SYN-ACK response for a subflow_request_sock. Co-developed-by:
-
Peter Krystad authored
Add hooks to tcp_output.c to add MP_CAPABLE to an outgoing SYN request, to capture the MP_CAPABLE in the received SYN-ACK, to add MP_CAPABLE to the final ACK of the three-way handshake. Use the .sk_rx_dst_set() handler in the subflow proto to capture when the responding SYN-ACK is received and notify the MPTCP connection layer. Co-developed-by:
-
Peter Krystad authored
Use ULP to associate a subflow_context structure with each TCP subflow socket. Creating these sockets requires new bind and connect functions to make sure ULP is set up immediately when the subflow sockets are created. Co-developed-by:
-
Peter Krystad authored
Add hooks to parse and format the MP_CAPABLE option. This option is handled according to MPTCP version 0 (RFC6824). MPTCP version 1 MP_CAPABLE (RFC6824bis/RFC8684) will be added later in coordination with related code changes. Co-developed-by:
-
Mat Martineau authored
Implements the infrastructure for MPTCP sockets. MPTCP sockets open one in-kernel TCP socket per subflow. These subflow sockets are only managed by the MPTCP socket that owns them and are not visible from userspace. This commit allows a userspace program to open an MPTCP socket with: sock = socket(AF_INET, SOCK_STREAM, IPPROTO_MPTCP); The resulting socket is simply a wrapper around a single regular TCP socket, without any of the MPTCP protocol implemented over the wire. Co-developed-by:
-
David S. Miller authored
Nikolay Aleksandrov says: ==================== net: bridge: add per-vlan state option This set adds the first per-vlan option - state, which uses the new vlan infrastructure that was recently added. It gives us forwarding control on per-vlan basis. The first 3 patches prepare the vlan code to support option dumping and modification. We still compress vlan ranges which have equal options, each new option will have to add its own equality check to br_vlan_opts_eq(). The vlans are created in forwarding state by default to be backwards compatible and vlan state is considered only when the port state is forwarding (more info in patch 4). I'll send the selftest for the vlan state with the iproute2 patch-set. v2: patch 3: do full (all-vlan) notification only on vlan create/delete, otherwise use the per-vlan notifications only, rework how option change ranges are detected, add more verbose error messages when setting options and add checks if a vlan should be used. ==================== Signed-off-by: -
Nikolay Aleksandrov authored
The first per-vlan option added is state, it is needed for EVPN and for per-vlan STP. The state allows to control the forwarding on per-vlan basis. The vlan state is considered only if the port state is forwarding in order to avoid conflicts and be consistent. br_allowed_egress is called only when the state is forwarding, but the ingress case is a bit more complicated due to the fact that we may have the transition between port:BR_STATE_FORWARDING -> vlan:BR_STATE_LEARNING which should still allow the bridge to learn from the packet after vlan filtering and it will be dropped after that. Also to optimize the pvid state check we keep a copy in the vlan group to avoid one lookup. The state members are modified with *_ONCE() to annotate the lockless access. Signed-off-by:
Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Signed-off-by:
-
Nikolay Aleksandrov authored
This patch adds support for option modification of single vlans and ranges. It allows to only modify options, i.e. skip create/delete by using the BRIDGE_VLAN_INFO_ONLY_OPTS flag. When working with a range option changes we try to pack the notifications as much as possible. v2: do full port (all vlans) notification only when creating/deleting vlans for compatibility, rework the range detection when changing options, add more verbose extack errors and check if a vlan should be used (br_vlan_should_use checks) Signed-off-by: -
Nikolay Aleksandrov authored
We'll be dumping the options for the whole range if they're equal. The first range vlan will be used to extract the options. The commit doesn't change anything yet it just adds the skeleton for the support. The dump will happen when the first option is added. Signed-off-by:
-
Nikolay Aleksandrov authored
If we make sure that br_allowed_egress is called only when we have BR_STATE_FORWARDING state then we can avoid a test later when we add per-vlan state. Signed-off-by:
-
- 23 Jan, 2020 7 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/saeed/linuxDavid S. Miller authored
Saeed Mahameed says: ==================== mlx5-updates-2020-01-22 This series provides updates to mlx5 driver. 1) Misc small cleanups 2) Some SW steering updates including header copy support 3) Full ethtool statistics support for E-Switch uplink representor Some refactoring was required to share the bare-metal NIC ethtool stats with the Uplink representor. On Top of this Vlad converts the ethtool stats support in E-Swtich vports representors to use the mlx5e "stats groups" infrastructure and then applied all applicable stats to the uplink representor netdev. ==================== Signed-off-by: -
David S. Miller authored
Dan Murphy says: ==================== Add PHY IDs for DP83825/6 Adding new PHY IDs for the DP83825 and DP83826 TI Ethernet PHYs to the DP83822 PHY driver. ==================== Signed-off-by: -
Dan Murphy authored
Add PHY IDs for the DP83825CS, DP83825CM and the DP83825S devices to the DP83822 driver. Signed-off-by:
Dan Murphy <dmurphy@ti.com> Reviewed-by:
Andrew Lunn <andrew@lunn.ch> Signed-off-by:
-
Dan Murphy authored
Add phy IDs to the DP83822 phy driver for the DP83826N and the DP83826NC devices. The register map and features are the same for basic enablement. Signed-off-by:
-
David S. Miller authored
Gautam Ramakrishnan says: ==================== net: sched: add Flow Queue PIE packet scheduler Flow Queue PIE packet scheduler This patch series implements the Flow Queue Proportional Integral controller Enhanced (FQ-PIE) active queue Management algorithm. It is an enhancement over the PIE algorithm. It integrates the PIE aqm with a deficit round robin scheme. FQ-PIE is implemented over the latest version of PIE which uses timestamps to calculate queue delay with an additional option of using average dequeue rate to calculate the queue delay. This patch also adds a memory limit of all the packets across all queues to a default value of 32Mb. - Patch #1 - Creates pie.h and moves all small functions and structures common to PIE and FQ-PIE here. The functions are all made inline. - Patch #2 - #8 - Addresses code formatting, indentation, comment changes and rearrangement of structure members. - Patch #9 - Refactors sch_pie.c by changing arguments to calculate_probability(), [pie_]drop_early() and pie_process_dequeue() to make it generic enough to be used by sch_fq_pie.c. These functions are exported to be used by sch_fq_pie.c. - Patch #10 - Adds the FQ-PIE Qdisc. For more information: https://tools.ietf.org/html/rfc8033 Changes from v6 to v7 - Call tcf_block_put() when destroying the Qdisc as suggested by Jakub Kicinski. Changes from v5 to v6 - Rearranged struct members according to their access pattern and to remove holes. Changes from v4 to v5 - This patch series breaks down patch 1 of v4 into separate logical commits as suggested by David Miller. Changes from v3 to v4 - Used non deprecated version of nla_parse_nested - Used SZ_32M macro - Removed an unused variable - Code cleanup All suggested by Jakub and Toke. Changes from v2 to v3 - Exported drop_early, pie_process_dequeue and calculate_probability functions from sch_pie as suggested by Stephen Hemminger. Changes from v1 ( and RFC patch) to v2 - Added timestamp to calculate queue delay as recommended by Dave Taht - Packet memory limit implemented as recommended by Toke. - Added external classifier as recommended by Toke. - Used NET_XMIT_CN instead of NET_XMIT_DROP as the return value in the fq_pie_qdisc_enqueue function. ==================== Signed-off-by: -
Mohit P. Tahiliani authored
Principles: - Packets are classified on flows. - This is a Stochastic model (as we use a hash, several flows might be hashed to the same slot) - Each flow has a PIE managed queue. - Flows are linked onto two (Round Robin) lists, so that new flows have priority on old ones. - For a given flow, packets are not reordered. - Drops during enqueue only. - ECN capability is off by default. - ECN threshold (if ECN is enabled) is at 10% by default. - Uses timestamps to calculate queue delay by default. Usage: tc qdisc ... fq_pie [ limit PACKETS ] [ flows NUMBER ] [ target TIME ] [ tupdate TIME ] [ alpha NUMBER ] [ beta NUMBER ] [ quantum BYTES ] [ memory_limit BYTES ] [ ecnprob PERCENTAGE ] [ [no]ecn ] [ [no]bytemode ] [ [no_]dq_rate_estimator ] defaults: limit: 10240 packets, flows: 1024 target: 15 ms, tupdate: 15 ms (in jiffies) alpha: 1/8, beta : 5/4 quantum: device MTU, memory_limit: 32 Mb ecnprob: 10%, ecn: off bytemode: off, dq_rate_estimator: off Signed-off-by:Mohit P. Tahiliani <tahiliani@nitk.edu.in> Signed-off-by:
Sachin D. Patil <sdp.sachin@gmail.com> Signed-off-by:
V. Saicharan <vsaicharan1998@gmail.com> Signed-off-by:
Mohit Bhasi <mohitbhasi1998@gmail.com> Signed-off-by:
Leslie Monis <lesliemonis@gmail.com> Signed-off-by:
Gautam Ramakrishnan <gautamramk@gmail.com> Signed-off-by:
-
Mohit P. Tahiliani authored
This patch makes the drop_early(), calculate_probability() and pie_process_dequeue() functions generic enough to be used by both PIE and FQ-PIE (to be added in a future commit). The major change here is in the way the functions take in arguments. This patch exports these functions and makes FQ-PIE dependent on sch_pie. Signed-off-by:
-
