- 15 Mar, 2014 40 commits
-
-
Hannes Reinecke authored
When no HBA is found we should be returning '-ENXIO' to be consistent with the other return values. Signed-off-by:
Hannes Reinecke <hare@suse.de> Acked-by:
Kashyap Desai <kashyap.desai@lsi.com> Signed-off-by:
James Bottomley <JBottomley@Parallels.com>
-
Hannes Reinecke authored
The pointer to the queue info structure is potentially a 64-bit value, so we should be using the correct macros to set the values in the init frame. Signed-off-by:
Hannes Reinecke <hare@suse.de> Acked-by:
Kashyap Desai <kashyap.desai@lsi.com> Signed-off-by:
James Bottomley <JBottomley@Parallels.com>
-
Lukasz Dorau authored
The version of isci driver has not been updated for 2 years. It was 83 isci commits ago. Suspend/resume support has been implemented and many bugs have been fixed since 1.1. Now update the version to 1.2. Signed-off-by:
Lukasz Dorau <lukasz.dorau@intel.com> Signed-off-by:
Dave Jiang <dave.jiang@intel.com> Signed-off-by:
Maciej Patelczyk <maciej.patelczyk@intel.com> Signed-off-by:
James Bottomley <JBottomley@Parallels.com>
-
Hannes Reinecke authored
For various error conditions the bfa driver just returns 'DID_ERROR', which carries no information at all about the actual source of error. This patch updates the error handling to return a correct error code, depending on the type of error occurred. Signed-off-by:
Hannes Reinecke <hare@suse.de> Acked-by:
Vijaya Mohan Guvva <vmohan@brocade.com> Signed-off-by:
James Bottomley <JBottomley@Parallels.com>
-
Vikas Chaudhary authored
Signed-off-by:
Vikas Chaudhary <vikas.chaudhary@qlogic.com> Signed-off-by:
James Bottomley <JBottomley@Parallels.com>
-
Vikas Chaudhary authored
Fix following sparse warnings:- drivers/scsi/qla4xxx/ql4_os.c:2109:33: warning: cast truncates bits from constant value (ffff7fff becomes 7fff) drivers/scsi/qla4xxx/ql4_os.c:2306:33: warning: cast truncates bits from constant value (ffff7fff becomes 7fff) Signed-off-by:
Vikas Chaudhary <vikas.chaudhary@qlogic.com> Reviewed-by:
Mike Christie <michaelc@cs.wisc.edu> Signed-off-by:
James Bottomley <JBottomley@Parallels.com>
-
Nilesh Javali authored
Signed-off-by:
Nilesh Javali <nilesh.javali@qlogic.com> Signed-off-by:
Vikas Chaudhary <vikas.chaudhary@qlogic.com> Reviewed-by:
Mike Christie <michaelc@cs.wisc.edu> Signed-off-by:
James Bottomley <JBottomley@Parallels.com>
-
Vikas Chaudhary authored
Signed-off-by:
Vikas Chaudhary <vikas.chaudhary@qlogic.com> Reviewed-by:
Mike Christie <michaelc@cs.wisc.edu> Signed-off-by:
James Bottomley <JBottomley@Parallels.com>
-
Vikas Chaudhary authored
Signed-off-by:
Vikas Chaudhary <vikas.chaudhary@qlogic.com> Reviewed-by:
Mike Christie <michaelc@cs.wisc.edu> Signed-off-by:
James Bottomley <JBottomley@Parallels.com>
-
Vikas Chaudhary authored
Signed-off-by:
Vikas Chaudhary <vikas.chaudhary@qlogic.com> Reviewed-by:
Mike Christie <michaelc@cs.wisc.edu> Signed-off-by:
James Bottomley <JBottomley@Parallels.com>
-
Vikas Chaudhary authored
Signed-off-by:
Vikas Chaudhary <vikas.chaudhary@qlogic.com> Reviewed-by:
Mike Christie <michaelc@cs.wisc.edu> Signed-off-by:
James Bottomley <JBottomley@Parallels.com>
-
Vikas Chaudhary authored
Removing unused code as FW does not need any value in mbox-5. Signed-off-by:
Vikas Chaudhary <vikas.chaudhary@qlogic.com> Reviewed-by:
Mike Christie <michaelc@cs.wisc.edu> Signed-off-by:
James Bottomley <JBottomley@Parallels.com>
-
Vikas Chaudhary authored
Issue: While unloading driver MBOX 0x31 fail as DDB logout (MBOX 0x56) operation is not completed. Fix: Wait for DDB Logout completion before MBOX 0x31 Signed-off-by:
Vikas Chaudhary <vikas.chaudhary@qlogic.com> Reviewed-by:
Mike Christie <michaelc@cs.wisc.edu> Signed-off-by:
James Bottomley <JBottomley@Parallels.com>
-
Vikas Chaudhary authored
Issue: Driver holds rom-lock for too long during reset recovery. During adapter reset testing, it was found that the driver holds the rom-lock for too long, because of which other drivers fail to acquire the rom-lock, leading to reset failures. The primary cause is, in the bootstrap code, while holding the rom-lock, the driver checks if the peg is halted, causing a 2 second contention. Fix: When a reset recovery starts, the driver deduces the cause, and sets appropriate flags in watchdog & recover_adapter routines. This flag should be used to determine if bootstrap is invoked from probe or reset context, reducing the rom-lock footprint of the drivers. Signed-off-by:
Vikas Chaudhary <vikas.chaudhary@qlogic.com> Reviewed-by:
Mike Christie <michaelc@cs.wisc.edu> Signed-off-by:
James Bottomley <JBottomley@Parallels.com>
-
Tej Parkash authored
Issue: minidump data collection fails as driver reports data mismatch Fix: When the driver encounters a new entry type that it cannot process, it should just skip the entry and adjust the total buffer size by subtracting the skipped bytes from it. This is to ensure that there is no data mismatch because of the new entries. Signed-off-by:
Tej Parkash <tej.parkash@qlogic.com> Signed-off-by:
Vikas Chaudhary <vikas.chaudhary@qlogic.com> Reviewed-by:
Mike Christie <michaelc@cs.wisc.edu> Signed-off-by:
James Bottomley <JBottomley@Parallels.com>
-
Tej Parkash authored
Issue: Pending IO wait does not complete after triggering Graceful reset, causing ack timeout and call traces. Fix: 1. Reducing the IO command wait timeout before triggering reset, as logically also timeout should be less than reset timeout (10sec). 2. Moving the abort IO after chip reset, because only after chip reset, driver owns the IO otherwise it is with firmware and can still revert back with response. Signed-off-by:
Tej Parkash <tej.parkash@qlogic.com> Signed-off-by:
Vikas Chaudhary <vikas.chaudhary@qlogic.com> Reviewed-by:
Mike Christie <michaelc@cs.wisc.edu> Signed-off-by:
James Bottomley <JBottomley@Parallels.com>
-
Tej Parkash authored
Issue: While booting with kdump kernel, driver receive IOCB interrupts for which it is not ready which results in processing them before init_firmware during driver probe Fix: Two steps solution 1. Make driver ready to process the interrupt before interupts handlers is registered. 2. Stop driver processing iocb interrupts if not generated as per firmware protocol i.e R2H bit set Signed-off-by:
Tej Parkash <tej.parkash@qlogic.com> Signed-off-by:
Vikas Chaudhary <vikas.chaudhary@qlogic.com> Reviewed-by:
Mike Christie <michaelc@cs.wisc.edu> Signed-off-by:
James Bottomley <JBottomley@Parallels.com>
-
Vikas Chaudhary authored
Issue: Mailbox command 0x102 (IDC Time Extend) failure seen while applying changes to iface using iscsiadm Fix: Added fix to extend IDC timeout only for ISP84xx when IDC ACK needs to be posted and disable ACB mailbox command completion is in intermediate state. Signed-off-by:
Vikas Chaudhary <vikas.chaudhary@qlogic.com> Reviewed-by:
Mike Christie <michaelc@cs.wisc.edu> Signed-off-by:
James Bottomley <JBottomley@Parallels.com>
-
Nilesh Javali authored
Issue: qla4xxx Unable to clear DDB indices when logout fails due to failure of connection close mbox command. Root cause: If login to session fail, iscsiadm make call to destroy_session. qla4xxx driver does not free ddb index map before free_ddb() Fix: Clear DDB Index map before free_ddb in "destroy_session" in case of connection close mailbox command failure with 4005h. Signed-off-by:
Nilesh Javali <nilesh.javali@qlogic.com> Signed-off-by:
Vikas Chaudhary <vikas.chaudhary@qlogic.com> Reviewed-by:
Mike Christie <michaelc@cs.wisc.edu> Signed-off-by:
James Bottomley <JBottomley@Parallels.com>
-
Vikas Chaudhary authored
Signed-off-by:
Vikas Chaudhary <vikas.chaudhary@qlogic.com> Reviewed-by:
Mike Christie <michaelc@cs.wisc.edu> Signed-off-by:
James Bottomley <JBottomley@Parallels.com>
-
Tej Parkash authored
Signed-off-by:
Vikas Chaudhary <vikas.chaudhary@qlogic.com> Reviewed-by:
Mike Christie <michaelc@cs.wisc.edu> Signed-off-by:
James Bottomley <JBottomley@Parallels.com>
-
Vikas Chaudhary authored
If waiting for signals was interrupted then the device was put to FAILED state. Use msleep instead of msleep_interruptible to handle this correctly. Signed-off-by:
Vikas Chaudhary <vikas.chaudhary@qlogic.com> Reviewed-by:
Mike Christie <michaelc@cs.wisc.edu> Signed-off-by:
James Bottomley <JBottomley@Parallels.com>
-
Nilesh Javali authored
Signed-off-by:
Nilesh Javali <nilesh.javali@qlogic.com> Signed-off-by:
Vikas Chaudhary <vikas.chaudhary@qlogic.com> Reviewed-by:
Mike Christie <michaelc@cs.wisc.edu> Signed-off-by:
James Bottomley <JBottomley@Parallels.com>
-
Nilesh Javali authored
Signed-off-by:
Vikas Chaudhary <vikas.chaudhary@qlogic.com> Reviewed-by:
Mike Christie <michaelc@cs.wisc.edu> Signed-off-by:
James Bottomley <JBottomley@Parallels.com>
-
Vikas Chaudhary authored
Removed AF_83XX_NO_FWDUMP flag and directly checking IDC_CTRL bit1 while taking minidump, to check for graceful reset. Signed-off-by:
Vikas Chaudhary <vikas.chaudhary@qlogic.com> Reviewed-by:
Mike Christie <michaelc@cs.wisc.edu> Signed-off-by:
James Bottomley <JBottomley@Parallels.com>
-
Vikas Chaudhary authored
Signed-off-by:
Vikas Chaudhary <vikas.chaudhary@qlogic.com> Reviewed-by:
Mike Christie <michaelc@cs.wisc.edu> Signed-off-by:
James Bottomley <JBottomley@Parallels.com>
-
Vikas Chaudhary authored
Signed-off-by:
Vikas Chaudhary <vikas.chaudhary@qlogic.com> Reviewed-by:
Mike Christie <michaelc@cs.wisc.edu> Signed-off-by:
James Bottomley <JBottomley@Parallels.com>
-
Nilesh Javali authored
Issue: For ISP8xxx, adapter initialization is not retried if qla4xxx_initialize_adapter fails. Fix: If qla4xxx_initialize_adapter fails, first check if failure is due to IRQs not attached in order to skip retrial, then free the IRQs and then retry initializing the adapter. Signed-off-by:
Nilesh Javali <nilesh.javali@qlogic.com> Signed-off-by:
Vikas Chaudhary <vikas.chaudhary@qlogic.com> Reviewed-by:
Mike Christie <michaelc@cs.wisc.edu> Signed-off-by:
James Bottomley <JBottomley@Parallels.com>
-
Jayamohan Kallickal authored
Signed-off-by:
John Soni Jose <sony.john-n@emulex.com> Signed-off-by:
Jayamohan Kallickal <jayamohan.kallickal@emulex.com> Signed-off-by:
James Bottomley <JBottomley@Parallels.com>
-
Jayamohan Kallickal authored
Setting DMA bit mask 64 and roll back to 32 if not supported. Signed-off-by:
Minh Tran <minhduc.tran@emulex.com> Signed-off-by:
Jayamohan Kallickal <jayamohan.kallickal@emulex.com> Reviewed-by:
Mike Christie <michaelc@cs.wisc.edu> Signed-off-by:
James Bottomley <JBottomley@Parallels.com>
-
Jayamohan Kallickal authored
scsi_cmnd n io_task was not NULL when - Link goes down while IO was happening and session is closed. - Task for which TMF was sent. Signed-off-by:
John Soni Jose <sony.john-n@emulex.com> Signed-off-by:
Jayamohan Kallickal <jayamohan.kallickal@emulex.com> Reviewed-by:
Mike Christie <michaelc@cs.wisc.edu> Signed-off-by:
James Bottomley <JBottomley@Parallels.com>
-
Jayamohan Kallickal authored
In iSCSI Boot scenario, when machine is reboot/shutdown phase the active sessions are not closed. Driver queue cleanup is done as part of unload and device is disabled. Sessions are still active, iSCSI commands are issued from session which comes to driver, as driver cleanup and device disabled there is kernel stack dump with errors. Fix is invoking iscsi_session_failure with ISCSI_ERR_INVALID_HOST on all the active sessions when shutdown routine is called. Signed-off-by:
John Soni Jose <sony.john-n@emulex.com> Signed-off-by:
Jayamohan Kallickal <jayamohan.kallickal@emulex.com> Reviewed-by:
Mike Christie <michaelc@cs.wisc.edu> Signed-off-by:
James Bottomley <JBottomley@Parallels.com>
-
Jayamohan Kallickal authored
The doorbel format has been updated to support additonal functionalities of SKH-R adapter. These changes are made such that older FW also works fine. Signed-off-by:
John Soni Jose <sony.john-n@emulex.com> Signed-off-by:
Jayamohan Kallickal <jayamohan.kallickal@emulex.com> Reviewed-by:
Mike Christie <michaelc@cs.wisc.edu> Signed-off-by:
James Bottomley <JBottomley@Parallels.com>
-
Jayamohan Kallickal authored
The 100Mbps port speed macro used was not proper. Signed-off-by:
John Soni Jose <sony.john-n@emulex.com> Signed-off-by:
Jayamohan Kallickal <jayamohan.kallickal@emulex.com> Reviewed-by:
Mike Christie <michaelc@cs.wisc.edu> Signed-off-by:
James Bottomley <JBottomley@Parallels.com>
-
Jayamohan Kallickal authored
When an MBX command timeout happens,the resources associated with the MBX command were freed. If FW were to give the response to host after the timeout value set by driver then driver crashes as the MBX Cmd resources were already freed. This patch fixes this issue by maintaing a state flag for each of the MBX command posted/timedout/completed. Signed-off-by:
John Soni Jose <sony.john-n@emulex.com> Signed-off-by:
Jayamohan Kallickal <jayamohan.kallickal@emulex.com> Reviewed-by:
Mike Christie <michaelc@cs.wisc.edu> Signed-off-by:
James Bottomley <JBottomley@Parallels.com>
-
Stephen M. Cameron authored
Signed-off-by:
Stephen M. Cameron <scameron@beardog.cce.hp.com> Signed-off-by:
James Bottomley <JBottomley@Parallels.com>
-
Stephen M. Cameron authored
Signed-off-by:
Stephen M. Cameron <scameron@beardog.cce.hp.com> Signed-off-by:
James Bottomley <JBottomley@Parallels.com>
-
Stephen M. Cameron authored
Signed-off-by:
Scott Teel <scott.teel@hp.com> Signed-off-by:
Stephen M. Cameron <scameron@beardog.cce.hp.com> Signed-off-by:
James Bottomley <JBottomley@Parallels.com>
-
Stephen M. Cameron authored
On encountering unexpected error conditions from driver initiated commands, print something useful like CDB and sense data rather than something useless like the kernel virtual address of the command buffer. Signed-off-by:
Stephen M. Cameron <scameron@beardog.cce.hp.com> Signed-off-by:
James Bottomley <JBottomley@Parallels.com>
-
Stephen M. Cameron authored
Do no rescan on every events -- way too many rescans are triggered if we don't filter the events. Limit rescans to be triggered by the following set of events: * controller state change * enclosure hot plug * physical drive state change * logical drive state change * redundant controller state change * accelerated io enabled/disabled * accelerated io configuration change Signed-off-by:
Stephen M. Cameron <scameron@beardog.cce.hp.com> Signed-off-by:
James Bottomley <JBottomley@Parallels.com>
-