Having these checks in ibmvnic_xmit causes problems with VLAN
tagging and balance-alb/tlb bonding modes. The restriction they
imposed can be removed.
Signed-off-by: John Allen <jallen@linux.vnet.ibm.com>
Signed-off-by: Nathan Fontenot <nfont@linux.vnet.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Fix two issues in the reuseport_bpf selftests that were
reported by Linaro CI:

  [...]
  + ./reuseport_bpf
  ---- IPv4 UDP ----
  Testing EBPF mod 10...
  Reprograming, testing mod 5...
  ./reuseport_bpf: ebpf error. log:
  0: (bf) r6 = r1
  1: (20) r0 = *(u32 *)skb[0]
  2: (97) r0 %= 10
  3: (95) exit
  processed 4 insns
  : Operation not permitted
  + echo FAIL
  [...]
  ---- IPv4 TCP ----
  Testing EBPF mod 10...
  ./reuseport_bpf: failed to bind send socket: Address already in use
  + echo FAIL
  [...]

For the former adjust rlimit since this was the cause of
failure for loading the BPF prog, and for the latter add
SO_REUSEADDR.
Reported-by: Naresh Kamboju <naresh.kamboju@linaro.org>
Link: https://bugs.linaro.org/show_bug.cgi?id=3502Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: David S. Miller <davem@davemloft.net>

When SCTP makes INIT or INIT_ACK packet the total chunk length
can exceed SCTP_MAX_CHUNK_LEN which leads to kernel panic when
transmitting these packets, e.g. the crash on sending INIT_ACK:

[  597.804948] skbuff: skb_over_panic: text:00000000ffae06e4 len:120168
               put:120156 head:000000007aa47635 data:00000000d991c2de
               tail:0x1d640 end:0xfec0 dev:<NULL>
...
[  597.976970] ------------[ cut here ]------------
[  598.033408] kernel BUG at net/core/skbuff.c:104!
[  600.314841] Call Trace:
[  600.345829]  <IRQ>
[  600.371639]  ? sctp_packet_transmit+0x2095/0x26d0 [sctp]
[  600.436934]  skb_put+0x16c/0x200
[  600.477295]  sctp_packet_transmit+0x2095/0x26d0 [sctp]
[  600.540630]  ? sctp_packet_config+0x890/0x890 [sctp]
[  600.601781]  ? __sctp_packet_append_chunk+0x3b4/0xd00 [sctp]
[  600.671356]  ? sctp_cmp_addr_exact+0x3f/0x90 [sctp]
[  600.731482]  sctp_outq_flush+0x663/0x30d0 [sctp]
[  600.788565]  ? sctp_make_init+0xbf0/0xbf0 [sctp]
[  600.845555]  ? sctp_check_transmitted+0x18f0/0x18f0 [sctp]
[  600.912945]  ? sctp_outq_tail+0x631/0x9d0 [sctp]
[  600.969936]  sctp_cmd_interpreter.isra.22+0x3be1/0x5cb0 [sctp]
[  601.041593]  ? sctp_sf_do_5_1B_init+0x85f/0xc30 [sctp]
[  601.104837]  ? sctp_generate_t1_cookie_event+0x20/0x20 [sctp]
[  601.175436]  ? sctp_eat_data+0x1710/0x1710 [sctp]
[  601.233575]  sctp_do_sm+0x182/0x560 [sctp]
[  601.284328]  ? sctp_has_association+0x70/0x70 [sctp]
[  601.345586]  ? sctp_rcv+0xef4/0x32f0 [sctp]
[  601.397478]  ? sctp6_rcv+0xa/0x20 [sctp]
...

Here the chunk size for INIT_ACK packet becomes too big, mostly
because of the state cookie (INIT packet has large size with
many address parameters), plus additional server parameters.

Later this chunk causes the panic in skb_put_data():

  skb_packet_transmit()
      sctp_packet_pack()
          skb_put_data(nskb, chunk->skb->data, chunk->skb->len);

'nskb' (head skb) was previously allocated with packet->size
from u16 'chunk->chunk_hdr->length'.

As suggested by Marcelo we should check the chunk's length in
_sctp_make_chunk() before trying to allocate skb for it and
discard a chunk if its size bigger than SCTP_MAX_CHUNK_LEN.
Signed-off-by: Alexey Kodanev <alexey.kodanev@oracle.com>
Acked-by: Marcelo Ricardo Leitner <marcelo.leinter@gmail.com>
Acked-by: Neil Horman <nhorman@tuxdriver.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Julian Wiedmann says:

====================
s390/qeth: fixes 2018-02-09

please apply the following two qeth patches for 4.16 and stable.

One restricts a command quirk to the intended commandd type,
while the other fixes an off-by-one during data transmission
that can cause qeth to build malformed buffer descriptors.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

send_control_data() applies some special handling to SETIP v4 IPA
commands. But current code parses *all* command types for the SETIP
command code. Limit the command code check to IPA commands.

Fixes: 5b54e16f ("qeth: do not spin for SETIP ip assist command")
Signed-off-by: Julian Wiedmann <jwi@linux.vnet.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

For a memory range/skb where the last byte falls onto a page boundary
(ie. 'end' is of the form xxx...xxx001), the PFN_UP() part of the
calculation currently doesn't round up to the next PFN due to an
off-by-one error.
Thus qeth believes that the skb occupies one page less than it
actually does, and may select a IO buffer that doesn't have enough spare
buffer elements to fit all of the skb's data.
HW detects this as a malformed buffer descriptor, and raises an
exception which then triggers device recovery.

Fixes: 2863c613 ("qeth: refactor calculation of SBALE count")
Signed-off-by: Ursula Braun <ubraun@linux.vnet.ibm.com>
Signed-off-by: Julian Wiedmann <jwi@linux.vnet.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

This patch switch to use kvmalloc_array() for using a vmalloc()
fallback to help in case kmalloc() fails.

Reported-by: syzbot+e4d4f9ddd4295539735d@syzkaller.appspotmail.com
Fixes: 2e0ab8ca ("ptr_ring: array based FIFO for pointers")
Signed-off-by: Jason Wang <jasowang@redhat.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

To avoid slab to warn about exceeded size, fail early if queue
occupies more than KMALLOC_MAX_SIZE.

Reported-by: syzbot+e4d4f9ddd4295539735d@syzkaller.appspotmail.com
Fixes: 2e0ab8ca ("ptr_ring: array based FIFO for pointers")
Signed-off-by: Jason Wang <jasowang@redhat.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Niklas Cassel says:

====================
stmmac irq fixes/cleanups

A couple of small stmmac irq fixes/cleanups.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

For dwmac4, GMAC_INT_DEFAULT_ENABLE already includes
GMAC_INT_PMT_EN, so it is redundant to check if hw->pmt
is set, and if so, setting the bit again.

For dwmac1000, GMAC_INT_DEFAULT_MASK does not include
GMAC_INT_DISABLE_PMT, so it is redundant to check if
hw->pmt is set, and if so, clearing an already cleared bit.

Improve code readability by removing this redundant code.
Signed-off-by: Niklas Cassel <niklas.cassel@axis.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

GMAC_INT_DEFAULT_MASK is written to the interrupt enable register.
In previous versions of the IP (e.g. dwmac1000), this register was
instead an interrupt mask register.
To improve clarity and reflect reality, rename GMAC_INT_DEFAULT_MASK
to GMAC_INT_DEFAULT_ENABLE.
Signed-off-by: Niklas Cassel <niklas.cassel@axis.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

The interrupt status register in both dwmac1000 and dwmac4 ignores
interrupt enable (for dwmac4) / interrupt mask (for dwmac1000).
Therefore, if we want to check only the bits that can actually trigger
an irq, we have to filter the interrupt status register manually.

Commit 0a764db1 ("stmmac: Discard masked flags in interrupt status
register") fixed this for dwmac1000. Fix the same issue for dwmac4.

Just like commit 0a764db1 ("stmmac: Discard masked flags in
interrupt status register"), this makes sure that we do not get
spurious link up/link down prints.
Signed-off-by: Niklas Cassel <niklas.cassel@axis.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

When allocating RX or TX buffer pools, the driver needs to provide a
unique mapping ID to firmware for each pool. This value is assigned
using a counter which is incremented after a new pool is created. The
ID can be an integer ranging from 1-255. When migrating to a device
that requests a different number of queues, this value was not being
reset properly. As a result, after enough migrations, the counter
exceeded the upper bound and pool creation failed. This is fixed by
resetting the counter to one in this case.
Signed-off-by: Thomas Falcon <tlfalcon@linux.vnet.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Daniel Borkmann says:

====================
pull-request: bpf 2018-02-09

The following pull-request contains BPF updates for your *net* tree.

The main changes are:

1) Two fixes for BPF sockmap in order to break up circular map references
   from programs attached to sockmap, and detaching related sockets in
   case of socket close() event. For the latter we get rid of the
   smap_state_change() and plug into ULP infrastructure, which will later
   also be used for additional features anyway such as TX hooks. For the
   second issue, dependency chain is broken up via map release callback
   to free parse/verdict programs, all from John.

2) Fix a libbpf relocation issue that was found while implementing XDP
   support for Suricata project. Issue was that when clang was invoked
   with default target instead of bpf target, then various other e.g.
   debugging relevant sections are added to the ELF file that contained
   relocation entries pointing to non-BPF related sections which libbpf
   trips over instead of skipping them. Test cases for libbpf are added
   as well, from Jesper.

3) Various misc fixes for bpftool and one for libbpf: a small addition
   to libbpf to make sure it recognizes all standard section prefixes.
   Then, the Makefile in bpftool/Documentation is improved to explicitly
   check for rst2man being installed on the system as we otherwise risk
   installing empty man pages; the man page for bpftool-map is corrected
   and a set of missing bash completions added in order to avoid shipping
   bpftool where the completions are only partially working, from Quentin.

4) Fix applying the relocation to immediate load instructions in the
   nfp JIT which were missing a shift, from Jakub.

5) Two fixes for the BPF kernel selftests: handle CONFIG_BPF_JIT_ALWAYS_ON=y
   gracefully in test_bpf.ko module and mark them as FLAG_EXPECTED_FAIL
   in this case; and explicitly delete the veth devices in the two tests
   test_xdp_{meta,redirect}.sh before dismantling the netnses as when
   selftests are run in batch mode, then workqueue to handle destruction
   might not have finished yet and thus veth creation in next test under
   same dev name would fail, from Yonghong.

6) Fix test_kmod.sh to check the test_bpf.ko module path before performing
   an insmod, and fallback to modprobe. Especially the latter is useful
   when having a device under test that has the modules installed instead,
   from Naresh.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

Jesper Dangaard Brouer says:

====================
While playing with using libbpf for the Suricata project, we had
issues LLVM >= 4.0.1 generating ELF files that could not be loaded
with libbpf (tools/lib/bpf/).

During the troubleshooting phase, I wrote a test program and improved
the debugging output in libbpf.  I turned this into a selftests
program, and it also serves as a code example for libbpf in itself.

I discovered that there are at least three ELF load issues with
libbpf.  I left them as TODO comments in (tools/testing/selftests/bpf)
test_libbpf.sh. I've only fixed the load issue with eh_frames, and
other types of relo-section that does not have exec flags.  We can
work on the other issues later.
====================
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>

V3: More generic skipping of relo-section (suggested by Daniel)

If clang >= 4.0.1 is missing the option '-target bpf', it will cause
llc/llvm to create two ELF sections for "Exception Frames", with
section names '.eh_frame' and '.rel.eh_frame'.

The BPF ELF loader library libbpf fails when loading files with these
sections.  The other in-kernel BPF ELF loader in samples/bpf/bpf_load.c,
handle this gracefully. And iproute2 loader also seems to work with these
"eh" sections.

The issue in libbpf is caused by bpf_object__elf_collect() skipping
some sections, and later when performing relocation it will be
pointing to a skipped section, as these sections cannot be found by
bpf_object__find_prog_by_idx() in bpf_object__collect_reloc().

This is a general issue that also occurs for other sections, like
debug sections which are also skipped and can have relo section.

As suggested by Daniel.  To avoid keeping state about all skipped
sections, instead perform a direct qlookup in the ELF object.  Lookup
the section that the relo-section points to and check if it contains
executable machine instructions (denoted by the sh_flags
SHF_EXECINSTR).  Use this check to also skip irrelevant relo-sections.

Note, for samples/bpf/ the '-target bpf' parameter to clang cannot be used
due to incompatibility with asm embedded headers, that some of the samples
include. This is explained in more details by Yonghong Song in bpf_devel_QA.
Signed-off-by: Jesper Dangaard Brouer <brouer@redhat.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>

This script test_libbpf.sh will be part of the 'make run_tests'
invocation, but can also be invoked manually in this directory,
and a verbose mode can be enabled via setting the environment
variable $VERBOSE like:

 $ VERBOSE=yes ./test_libbpf.sh

The script contains some tests that are commented out, as they
currently fail.  They are reminders about what we need to improve
for the libbpf loader library.
Signed-off-by: Jesper Dangaard Brouer <brouer@redhat.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>

V2: Moved program into selftests/bpf from tools/libbpf

This program can be used on its own for testing/debugging if a
BPF ELF-object file can be loaded with libbpf (from tools/lib/bpf).

If something is wrong with the ELF object, the program have
a --debug mode that will display the ELF sections and especially
the skipped sections.  This allows for quickly identifying the
problematic ELF section number, which can be corrolated with the
readelf tool.

The program signal error via return codes, and also have
a --quiet mode, which is practical for use in scripts like
selftests/bpf.
Signed-off-by: Jesper Dangaard Brouer <brouer@redhat.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>

While debugging a bpf ELF loading issue, I needed to correlate the
ELF section number with the failed relocation section reference.
Thus, add section numbers/index to the pr_debug.

In debug mode, also print section that were skipped.  This helped
me identify that a section (.eh_frame) was skipped, and this was
the reason the relocation section (.rel.eh_frame) could not find
that section number.

The section numbers corresponds to the readelf tools Section Headers [Nr].
Signed-off-by: Jesper Dangaard Brouer <brouer@redhat.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>

I recently fixed up a lot of commits that forgot to keep the tooling
headers in sync.  And then I forgot to do the same thing in commit
cb5f7334 ("bpf: add comments to BPF ld/ldx sizes"). Let correct
that before people notice ;-).

Lawrence did partly fix/sync this for bpf.h in commit d6d4f60c
("bpf: add selftest for tcpbpf").

Fixes: cb5f7334 ("bpf: add comments to BPF ld/ldx sizes")
Signed-off-by: Jesper Dangaard Brouer <brouer@redhat.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>

This condition wasn't adjusted when PHY_IGNORE_INTERRUPT (-2) was added
long ago. In case of PHY_IGNORE_INTERRUPT the MAC interrupt indicates
also PHY state changes and we should do what the symbol says.

Fixes: 84a527a4 ("net: phylib: fix interrupts re-enablement in phy_start")
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

The Cavium thunder nicvf driver supports rx/tx rings of up to 65536 entries per.
The number of entires are stored in the q_len member of struct q_desc_mem. The
problem is that q_len being a u16, results in 65536 becoming 0.

In getting pointers to descriptors in the rings, the driver uses q_len minus 1
as a mask after incrementing the pointer, in order to go back to the beginning
and not go past the end of the ring.

With the q_len set to 0 the mask is no longer correct and the driver does go
beyond the end of the ring, causing various ills. Usually the first thing that
shows up is a "NETDEV WATCHDOG: enP2p1s0f1 (nicvf): transmit queue 7 timed out"
warning.

This patch remedies the problem by changing q_len to a u32.
Signed-off-by: Dean Nelson <dnelson@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Merge tag 'wireless-drivers-next-for-davem-2018-02-08' of git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/wireless-drivers-next

Kalle Valo says:

====================
wireless-drivers-next patches for 4.16

The most important here is the ssb fix, it has been reported by the
users frequently and the fix just missed the final v4.15. Also
numerous other fixes, mt76 had multiple problems with aggregation and
a long standing unaligned access bug in rtlwifi is finally fixed.

Major changes:

ath10k

* correct firmware RAM dump length for QCA6174/QCA9377

* add new QCA988X device id

* fix a kernel panic during pci probe

* revert a recent commit which broke ath10k firmware metadata parsing

ath9k

* fix a noise floor regression introduced during the merge window

* add new device id

rtlwifi

* fix unaligned access seen on ARM architecture

mt76

* various aggregation fixes which fix connection stalls

ssb

* fix b43 and b44 on non-MIPS which broke in v4.15-rc9
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

In commit d618d09a ("tipc: enforce valid ratio between skb truesize
and contents") we introduced a test for ensuring that the condition
truesize/datasize <= 4 is true for a received buffer. Unfortunately this
test has two problems.

- Because of the integer arithmetics the test
  if (skb->truesize / buf_roundup_len(skb) > 4) will miss all
  ratios [4 < ratio < 5], which was not the intention.
- The buffer returned by skb_copy() inherits skb->truesize of the
  original buffer, which doesn't help the situation at all.

In this commit, we change the ratio condition and replace skb_copy()
with a call to skb_copy_expand() to finally get this right.
Acked-by: Jon Maloy <jon.maloy@ericsson.com>
Signed-off-by: Jon Maloy <jon.maloy@ericsson.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

The following sequence is currently broken:

 # tc qdisc add dev foo ingress
 # tc filter replace dev foo protocol all ingress \
   u32 match u8 0 0 action mirred egress mirror dev bar1
 # tc filter replace dev foo protocol all ingress \
   handle 800::800 pref 49152 \
   u32 match u8 0 0 action mirred egress mirror dev bar2
 Error: cls_u32: Key node flags do not match passed flags.
 We have an error talking to the kernel, -1

The error comes from u32_change() when comparing new and
existing flags. The existing ones always contains one of
TCA_CLS_FLAGS_{,NOT}_IN_HW flag depending on offloading state.
These flags cannot be passed from userspace so the condition
(n->flags != flags) in u32_change() always fails.

Fix the condition so the flags TCA_CLS_FLAGS_NOT_IN_HW and
TCA_CLS_FLAGS_IN_HW are not taken into account.

Fixes: 24d3dc6d ("net/sched: cls_u32: Reflect HW offload status")
Signed-off-by: Ivan Vecera <ivecera@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

mpls_label_ok() validates that the 'platform_label' array index from a
userspace netlink message payload is valid. Under speculation the
mpls_label_ok() result may not resolve in the CPU pipeline until after
the index is used to access an array element. Sanitize the index to zero
to prevent userspace-controlled arbitrary out-of-bounds speculation, a
precursor for a speculative execution side channel vulnerability.

Cc: <stable@vger.kernel.org>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Eric W. Biederman <ebiederm@xmission.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

rds: tcp: use rds_destroy_pending() to synchronize netns/module teardown and rds connection/workq management

An rds_connection can get added during netns deletion between lines 528
and 529 of

  506 static void rds_tcp_kill_sock(struct net *net)
  :
  /* code to pull out all the rds_connections that should be destroyed */
  :
  528         spin_unlock_irq(&rds_tcp_conn_lock);
  529         list_for_each_entry_safe(tc, _tc, &tmp_list, t_tcp_node)
  530                 rds_conn_destroy(tc->t_cpath->cp_conn);

Such an rds_connection would miss out the rds_conn_destroy()
loop (that cancels all pending work) and (if it was scheduled
after netns deletion) could trigger the use-after-free.

A similar race-window exists for the module unload path
in rds_tcp_exit -> rds_tcp_destroy_conns

Concurrency with netns deletion (rds_tcp_kill_sock()) must be handled
by checking check_net() before enqueuing new work or adding new
connections.

Concurrency with module-unload is handled by maintaining a module
specific flag that is set at the start of the module exit function,
and must be checked before enqueuing new work or adding new connections.

This commit refactors existing RDS_DESTROY_PENDING checks added by
commit 3db6e0d1 ("rds: use RCU to synchronize work-enqueue with
connection teardown") and consolidates all the concurrency checks
listed above into the function rds_destroy_pending().
Signed-off-by: Sowmini Varadhan <sowmini.varadhan@oracle.com>
Acked-by: Santosh Shilimkar <santosh.shilimkar@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Most callers of put_cmsg() use a "sizeof(foo)" for the length argument.
Within put_cmsg(), a copy_to_user() call is made with a dynamic size, as a
result of the cmsg header calculations. This means that hardened usercopy
will examine the copy, even though it was technically a fixed size and
should be implicitly whitelisted. All the put_cmsg() calls being built
from values in skbuff_head_cache are coming out of the protocol-defined
"cb" field, so whitelist this field entirely instead of creating per-use
bounce buffers, for which there are concerns about performance.

Original report was:

Bad or missing usercopy whitelist? Kernel memory exposure attempt detected from SLAB object 'skbuff_head_cache' (offset 64, size 16)!
WARNING: CPU: 0 PID: 3663 at mm/usercopy.c:81 usercopy_warn+0xdb/0x100 mm/usercopy.c:76
...
 __check_heap_object+0x89/0xc0 mm/slab.c:4426
 check_heap_object mm/usercopy.c:236 [inline]
 __check_object_size+0x272/0x530 mm/usercopy.c:259
 check_object_size include/linux/thread_info.h:112 [inline]
 check_copy_size include/linux/thread_info.h:143 [inline]
 copy_to_user include/linux/uaccess.h:154 [inline]
 put_cmsg+0x233/0x3f0 net/core/scm.c:242
 sock_recv_errqueue+0x200/0x3e0 net/core/sock.c:2913
 packet_recvmsg+0xb2e/0x17a0 net/packet/af_packet.c:3296
 sock_recvmsg_nosec net/socket.c:803 [inline]
 sock_recvmsg+0xc9/0x110 net/socket.c:810
 ___sys_recvmsg+0x2a4/0x640 net/socket.c:2179
 __sys_recvmmsg+0x2a9/0xaf0 net/socket.c:2287
 SYSC_recvmmsg net/socket.c:2368 [inline]
 SyS_recvmmsg+0xc4/0x160 net/socket.c:2352
 entry_SYSCALL_64_fastpath+0x29/0xa0

Reported-by: syzbot+e2d6cfb305e9f3911dea@syzkaller.appspotmail.com
Fixes: 6d07d1cd ("usercopy: Restrict non-usercopy caches to size 0")
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

In commit c7f5d105 ("net: Add eth_platform_get_mac_address() helper."),
two declarations were added:

  int eth_platform_get_mac_address(struct device *dev, u8 *mac_addr);
  unsigned char *arch_get_platform_get_mac_address(void);

An extra '_get' was introduced in arch_get_platform_get_mac_address, remove
it. Fix compile warning using W=1:

  CC      net/ethernet/eth.o
net/ethernet/eth.c:523:24: warning: no previous prototype for ‘arch_get_platform_mac_address’ [-Wmissing-prototypes]
 unsigned char * __weak arch_get_platform_mac_address(void)
                        ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~
  AR      net/ethernet/built-in.o
Signed-off-by: Mathieu Malaterre <malat@debian.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

While handling a driver reset we get a H_CLOSED return trying
to send a CRQ event. When this occurs we need to queue up another
reset attempt. Without doing this we see instances where the driver
is left in a closed state because the reset failed and there is no
further attempts to reset the driver.
Signed-off-by: Nathan Fontenot <nfont@linux.vnet.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Add suffix ULL to constants 272, 204, 136 and 68 in order to give the
compiler complete information about the proper arithmetic to use.
Notice that these constants are used in contexts that expect
expressions of type unsigned long long (64 bits, unsigned).

The following expressions are currently being evaluated using 32-bit
arithmetic:

272 * mult
204 * mult
136 * mult
68 * mult

Addresses-Coverity-ID: 201058
Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Since we've added support for IFLA_IF_NETNSID for RTM_{DEL,GET,SET,NEW}LINK
it is possible for userspace to send us requests with three different
properties to identify a target network namespace. This affects at least
RTM_{NEW,SET}LINK. Each of them could potentially refer to a different
network namespace which is confusing. For legacy reasons the kernel will
pick the IFLA_NET_NS_PID property first and then look for the
IFLA_NET_NS_FD property but there is no reason to extend this type of
behavior to network namespace ids. The regression potential is quite
minimal since the rtnetlink requests in question either won't allow
IFLA_IF_NETNSID requests before 4.16 is out (RTM_{NEW,SET}LINK) or don't
support IFLA_NET_NS_{PID,FD} (RTM_{DEL,GET}LINK) in the first place.
Signed-off-by: Christian Brauner <christian.brauner@ubuntu.com>
Acked-by: Jiri Benc <jbenc@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

When using devmap to redirect packets between interfaces,
xdp_do_flush() is usually a must to flush any batched
packets. Unfortunately this is missed in current tuntap
implementation.

Unlike most hardware driver which did XDP inside NAPI loop and call
xdp_do_flush() at then end of each round of poll. TAP did it in the
context of process e.g tun_get_user(). So fix this by count the
pending redirected packets and flush when it exceeds NAPI_POLL_WEIGHT
or MSG_MORE was cleared by sendmsg() caller.

With this fix, xdp_redirect_map works again between two TAPs.

Fixes: 761876c8 ("tap: XDP support")
Signed-off-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Nowadays, nlmsg_multicast() returns only 0 or -ESRCH but this was not the
case when commit 134e6375 was pushed.
However, there was no reason to stop the loop if a netns does not have
listeners.
Returns -ESRCH only if there was no listeners in all netns.

To avoid having the same problem in the future, I didn't take the
assumption that nlmsg_multicast() returns only 0 or -ESRCH.

Fixes: 134e6375 ("genetlink: make netns aware")
CC: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Don't put buffers of data to be handed to crypto on the stack as this may
cause an assertion failure in the kernel (see below).  Fix this by using an
kmalloc'd buffer instead.

kernel BUG at ./include/linux/scatterlist.h:147!
...
RIP: 0010:rxkad_encrypt_response.isra.6+0x191/0x1b0 [rxrpc]
RSP: 0018:ffffbe2fc06cfca8 EFLAGS: 00010246
RAX: 0000000000000000 RBX: ffff989277d59900 RCX: 0000000000000028
RDX: 0000259dc06cfd88 RSI: 0000000000000025 RDI: ffffbe30406cfd88
RBP: ffffbe2fc06cfd60 R08: ffffbe2fc06cfd08 R09: ffffbe2fc06cfd08
R10: 0000000000000000 R11: 0000000000000000 R12: 1ffff7c5f80d9f95
R13: ffffbe2fc06cfd88 R14: ffff98927a3f7aa0 R15: ffffbe2fc06cfd08
FS:  0000000000000000(0000) GS:ffff98927fc00000(0000) knlGS:0000000000000000
CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 000055b1ff28f0f8 CR3: 000000001b412003 CR4: 00000000003606f0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Call Trace:
 rxkad_respond_to_challenge+0x297/0x330 [rxrpc]
 rxrpc_process_connection+0xd1/0x690 [rxrpc]
 ? process_one_work+0x1c3/0x680
 ? __lock_is_held+0x59/0xa0
 process_one_work+0x249/0x680
 worker_thread+0x3a/0x390
 ? process_one_work+0x680/0x680
 kthread+0x121/0x140
 ? kthread_create_worker_on_cpu+0x70/0x70
 ret_from_fork+0x3a/0x50
Reported-by: Jonathan Billings <jsbillings@jsbillings.org>
Reported-by: Marc Dionne <marc.dionne@auristor.com>
Signed-off-by: David Howells <dhowells@redhat.com>
Tested-by: Jonathan Billings <jsbillings@jsbillings.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

ath.git fixes for 4.16. Major changes:

ath10k

* correct firmware RAM dump length for QCA6174/QCA9377

* add new QCA988X device id

* fix a kernel panic during pci probe

* revert a recent commit which broke ath10k firmware metadata parsing

ath9k

* fix a noise floor regression introduced during the merge window

* add new device id

Jakub Kicinski says:

====================
nfp: fix disabling TC offloads in flower, max TSO segs and module version

This set corrects the way nfp deals with the NETIF_F_HW_TC flag.
It has slipped the review that flower offload does not currently
refuse disabling this flag when filter offload is active.

nfp's flower offload does not actually keep track of how many filters
for each port are offloaded.  The accounting of the number of filters
is added to the nfp core structures, and BPF moved to use these
structures as well.

If users are allowed to disable TC offloads while filters are active,
not only is it incorrect behaviour, but actually the NFP will never
be told to remove the flows, leading to use-after-free when stats
arrive.

Fourth patch makes sure we declare the max number of TSO segments.
FW should drop longer packets cleanly (otherwise this would be a
security problem for untrusted VFs) but dropping longer TSO frames
is not nice and driver should prevent them from being generated.

Last small addition populates MODULE_VERSION with kernel version.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

DKMS and similar out-of-tree module replacement services use
module version to make sure the out-of-tree software is not
older than the module shipped with the kernel.  We use the
kernel version in ethtool -i output, put it into MODULE_VERSION
as well.
Reported-by: Jan Gutter <jan.gutter@netronome.com>
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Reviewed-by: Dirk van der Merwe <dirk.vandermerwe@netronome.com>
Reviewed-by: Simon Horman <simon.horman@netronome.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Most FWs limit the number of TSO segments a frame can produce
to 64.  This is for fairness and efficiency (of FW datapath)
reasons.  If a frame with larger number of segments is submitted
the FW will drop it.
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Reviewed-by: Simon Horman <simon.horman@netronome.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

All netdevs which can accept TC offloads must implement
.ndo_set_features().  nfp_reprs currently do not do that, which
means hw-tc-offload can be turned on and off even when offloads
are active.

Whether the offloads are active is really a question to nfp_ports,
so remove the per-app tc_busy callback indirection thing, and
simply count the number of offloaded items in nfp_port structure.

Fixes: 8a276873 ("nfp: provide infrastructure for offloading flower based TC filters")
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Reviewed-by: Simon Horman <simon.horman@netronome.com>
Tested-by: Pieter Jansen van Vuuren <pieter.jansenvanvuuren@netronome.com>
Signed-off-by: David S. Miller <davem@davemloft.net>