- 07 Aug, 2020 40 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/clk/linuxLinus Torvalds authored
Pull clk updates from Stephen Boyd: "It looks like a smaller batch of clk updates this time around. In the core framework we just have some minor tweaks and a debugfs feature, so not much to see there. The driver updates are fairly well split between AT91 and Qualcomm clk support. Adding those two drivers together equals about 50% of the diffstat. Otherwise, the big amount of work this time was on supporting Broadcom's Raspberry Pi firmware clks. Highlights: Core: - Document clk_hw_round_rate() so it gets some more use - Remove unused __clk_get_flags() - Add a prepare/enable debugfs feature similar to rate setting New Drivers: - Add support for SAMA7G5 SoC clks - Enable CPU clks on Qualcomm IPQ6018 SoCs - Enable CPU clks on Qualcomm MSM8996 SoCs - GPU clk support for Qualcomm SM8150 and SM8250 SoCs - Audio clks on Qualcomm SC7180 SoCs - Microchip Sparx5 DPLL clk - Add support for the new Renesas RZ/G2H (R8A774E1) SoC Updates: - Make defines for bcm63xx-gate clks to use in DT - Support BCM2711 SoC firmware clks - Add HDMI clks for BCM2711 SoCs - Add RTC related clks on Ingenic SoCs - Support USB PHY clks on Ingenic SoCs - Support gate clks on BCM6318 SoCs - RMU and DMAC/GPIO clock support for Actions Semi S500 SoCs - Use poll_timeout functions in Rockchip clk driver - Support Rockchip rk3288w SoC variant - Mark mac_lbtest critical on Rockchip rk3188 - Add CAAM clock support for i.MX vf610 driver - Add MU root clock support for i.MX imx8mp driver - Amlogic g12: add neural network accelerator clock sources - Amlogic meson8: remove critical flag for main PLL divider - Amlogic meson8: add video decoder clock gates - Convert one more Renesas DT binding to json-schema - Enhance critical clock handling on Renesas platforms to only consider clocks that were enabled at boot time" * tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: (79 commits) clk: qcom: gcc: Make disp gpll0 branch aon for sc7180/sdm845 ipq806x: gcc: add support for child probe clk: qcom: msm8996: Make symbol 'cpu_msm8996_clks' static clk: qcom: ipq8074: Add correct index for PCIe clocks clk: <linux/clk-provider.h>: drop a duplicated word clk: renesas: cpg-mssr: Add r8a774e1 support dt-bindings: clock: renesas,cpg-mssr: Document r8a774e1 clk: Drop duplicate selection in Kconfig clk: qcom: smd: Add support for MSM8992/4 rpm clocks clk: qcom: ipq8074: Add missing clocks for pcie dt-bindings: clock: qcom: ipq8074: Add missing bindings for PCIe Replace HTTP links with HTTPS ones: Common CLK framework clk: qcom: Add CPU clock driver for msm8996 dt-bindings: clk: qcom: Add bindings for CPU clock for msm8996 soc: qcom: Separate kryo l2 accessors from PMU driver clk: meson: meson8b: add the vclk2_en gate clock clk: meson: meson8b: add the vclk_en gate clock clk: qcom: Fix return value check in apss_ipq6018_probe() clk: bcm: dvp: Add missing module informations clk: meson: meson8b: Drop CLK_IS_CRITICAL from fclk_div2 ... -
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfsLinus Torvalds authored
Pull fdpick coredump update from Al Viro: "Switches fdpic coredumps away from original aout dumping primitives to the same kind of regset use as regular elf coredumps do" * 'work.fdpic' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: [elf-fdpic] switch coredump to regsets [elf-fdpic] use elf_dump_thread_status() for the dumper thread as well [elf-fdpic] move allocation of elf_thread_status into elf_dump_thread_status() [elf-fdpic] coredump: don't bother with cyclic list for per-thread objects kill elf_fpxregs_t take fdpic-related parts of elf_prstatus out unexport linux/elfcore.h
-
Linus Torvalds authored
Merge tag 'kallsyms_show_value-fix-v5.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux Pull sysfs module section fix from Kees Cook: "Fix sysfs module section output overflow. About a month after my kallsyms_show_value() refactoring landed, 0day noticed that there was a path through the kernfs binattr read handlers that did not have PAGE_SIZEd buffers, and the module "sections" read handler made a bad assumption about this, resulting in it stomping on memory when reached through small-sized splice() calls. I've added a set of tests to find these kinds of regressions more quickly in the future as well" Sefltests-acked-by:
Shuah Khan <skhan@linuxfoundation.org> * tag 'kallsyms_show_value-fix-v5.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux: selftests: splice: Check behavior of full and short splices module: Correctly truncate sysfs sections output
-
git://git.kernel.org/pub/scm/linux/kernel/git/kees/linuxLinus Torvalds authored
Pull seccomp fix from Kees Cook: "This fixes my typo in the SCM_RIGHTS refactoring that broke compat handling. Thanks to Thadeu Lima de Souza Cascardo for tracking it down, and to Christian Zigotzky and Alex Xu for their reports" * tag 'seccomp-v5.9-rc1-fix1' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux: net/scm: Fix typo in SCM_RIGHTS compat refactoring
-
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pmLinus Torvalds authored
Pull more power management updates from Rafael Wysocki: "These are mostly ARM cpufreq driver updates plus a cpufreq core cleanup, an ARM-wide change to make schedutil the default scaling governor, an intel_pstate driver fix and some runtime PM changes regarding kerneldoc comments. Specifics: - Add adaptive voltage scaling (AVS) support to the brcmstb cpufreq driver and clean it up (Florian Fainelli, Markus Mayer). - Add a new Tegra cpufreq driver and clean up the existing one (Jon Hunter, Sumit Gupta). - Add bandwidth level support to the Qcom cpufreq driver along with OPP changes (Sibi Sankar). - Clean up the sti, cpufreq-dt, ap806, CPPC cpufreq drivers (Viresh Kumar, Lee Jones, Ivan Kokshaysky, Sven Auhagen, Xin Hao). - Make schedutil the default governor for ARM (Valentin Schneider). - Fix dependency issues for the imx cpufreq driver (Walter Lozano). - Clean up cached_resolved_idx handlihng in the cpufreq core (Viresh Kumar). - Fix the intel_pstate driver to use the correct maximum frequency value when MSR_TURBO_RATIO_LIMIT is 0 (Srinivas Pandruvada). - Provide kenrneldoc comments for multiple runtime PM helpers and improve the pm_runtime_get_if_active() kerneldoc (Rafael Wysocki)" * tag 'pm-5.9-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (22 commits) cpufreq: intel_pstate: Fix cpuinfo_max_freq when MSR_TURBO_RATIO_LIMIT is 0 PM: runtime: Improve kerneldoc of pm_runtime_get_if_active() PM: runtime: Add kerneldoc comments to multiple helpers cpufreq: make schedutil the default for arm and arm64 cpufreq: cached_resolved_idx can not be negative cpufreq: Add Tegra194 cpufreq driver dt-bindings: arm: Add NVIDIA Tegra194 CPU Complex binding cpufreq: imx: Select NVMEM_IMX_OCOTP cpufreq: sti-cpufreq: Fix some formatting and misspelling issues cpufreq: tegra186: Simplify probe return path cpufreq: CPPC: Reuse caps variable in few routines cpufreq: ap806: fix cpufreq driver needs ap cpu clk cpufreq: cppc: Reorder code and remove apply_hisi_workaround variable cpufreq: dt: fix oops on armada37xx cpufreq: brcmstb-avs-cpufreq: send S2_ENTER / S2_EXIT commands to AVS cpufreq: brcmstb-avs-cpufreq: Support polling AVS firmware cpufreq: brcmstb-avs-cpufreq: more flexible interface for __issue_avs_command() cpufreq: qcom: Disable fast switch when scaling DDR/L3 cpufreq: qcom: Update the bandwidth levels on frequency change OPP: Add and export helper to set bandwidth ... -
Linus Torvalds authored
Merge tag 'for-5.9/dm-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm Pull device mapper updates from Mike Snitzer: - DM multipath locking fixes around m->flags tests and improvements to bio-based code so that it follows patterns established by request-based code. - Request-based DM core improvement to eliminate unnecessary call to blk_mq_queue_stopped(). - Add "panic_on_corruption" error handling mode to DM verity target. - DM bufio fix to to perform buffer cleanup from a workqueue rather than wait for IO in reclaim context from shrinker. - DM crypt improvement to optionally avoid async processing via workqueues for reads and/or writes -- via "no_read_workqueue" and "no_write_workqueue" features. This more direct IO processing improves latency and throughput with faster storage. Avoiding workqueue IO submission for writes (DM_CRYPT_NO_WRITE_WORKQUEUE) is a requirement for adding zoned block device support to DM crypt. - Add zoned block device support to DM crypt. Makes use of DM_CRYPT_NO_WRITE_WORKQUEUE and a new optional feature (DM_CRYPT_WRITE_INLINE) that allows write completion to wait for encryption to complete. This allows write ordering to be preserved, which is needed for zoned block devices. - Fix DM ebs target's check for REQ_OP_FLUSH. - Fix DM core's report zones support to not report more zones than were requested. - A few small compiler warning fixes. - DM dust improvements to return output directly to the user rather than require they scrape the system log for output. * tag 'for-5.9/dm-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm: dm: don't call report zones for more than the user requested dm ebs: Fix incorrect checking for REQ_OP_FLUSH dm init: Set file local variable static dm ioctl: Fix compilation warning dm raid: Remove empty if statement dm verity: Fix compilation warning dm crypt: Enable zoned block device support dm crypt: add flags to optionally bypass kcryptd workqueues dm bufio: do buffer cleanup from a workqueue dm rq: don't call blk_mq_queue_stopped() in dm_stop_queue() dm dust: add interface to list all badblocks dm dust: report some message results directly back to user dm verity: add "panic_on_corruption" error handling mode dm mpath: use double checked locking in fast path dm mpath: rename current_pgpath to pgpath in multipath_prepare_ioctl dm mpath: rework __map_bio() dm mpath: factor out multipath_queue_bio dm mpath: push locking down to must_push_back_rq() dm mpath: take m->lock spinlock when testing QUEUE_IF_NO_PATH dm mpath: changes from initial m->flags locking audit
-
git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-mediaLinus Torvalds authored
Pull media updates from Mauro Carvalho Chehab: - Legacy soc_camera driver was removed from staging - New I2C sensor related drivers: dw9768, ch7322, max9271, rdacm20 - TI vpe driver code was re-organized and had new features added - Added Xilinx MIPI CSI-2 Rx Subsystem driver - Added support for Infrared Toy and IR Droid devices - Lots of random driver fixes, new features and cleanups * tag 'media/v5.9-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: (318 commits) media: camss: fix memory leaks on error handling paths in probe media: davinci: vpif_capture: fix potential double free media: radio: remove redundant assignment to variable retval media: allegro: fix potential null dereference on header media: mtk-mdp: Fix a refcounting bug on error in init media: allegro: fix an error pointer vs NULL check media: meye: fix missing pm_mchip_mode field media: cafe-driver: use generic power management media: saa7164: use generic power management media: v4l2-dev/ioctl: Fix document for VIDIOC_QUERYCAP media: v4l2: Correct kernel-doc inconsistency media: v4l2: Correct kernel-doc inconsistency media: dvbdev.h: keep * together with the type media: v4l2-subdev.h: keep * together with the type media: videobuf2: Print videobuf2 buffer state by name media: colorspaces-details.rst: fix V4L2_COLORSPACE_JPEG description media: tw68: use generic power management media: meye: use generic power management media: cx88: use generic power management media: cx25821: use generic power management ...
-
git://git.linaro.org/landing-teams/working/fujitsu/integrationLinus Torvalds authored
Pull mailbox updates from Jassi Brar: "mediatek: - add support for mt6779 gce - shutdown cleanup and address shift support qcom: - add msm8994 apcs and sdm660 hmss compatibility imx: - mark PM funcs __maybe pcc: - put acpi table before bailout misc: - replace http with https links" * tag 'mailbox-v5.9' of git://git.linaro.org/landing-teams/working/fujitsu/integration: mailbox: mediatek: cmdq: clear task in channel before shutdown mailbox: cmdq: support mt6779 gce platform definition mailbox: cmdq: variablize address shift in platform dt-binding: gce: add gce header file for mt6779 mailbox: qcom: Add msm8994 apcs compatible mailbox: qcom: Add sdm660 hmss compatible mailbox: imx: Mark PM functions as __maybe_unused mailbox: pcc: Put the PCCT table for error path mailbox: Replace HTTP links with HTTPS ones
-
Kees Cook authored
When refactoring the SCM_RIGHTS code, I accidentally mis-merged my native/compat diffs, which entirely broke using SCM_RIGHTS in compat mode. Use the correct helper. Reported-by:
Christian Zigotzky <chzigotzky@xenosoft.de> Link: https://lists.ozlabs.org/pipermail/linuxppc-dev/2020-August/216156.htmlReported-by:
"Alex Xu (Hello71)" <alex_y_xu@yahoo.ca> Link: https://lore.kernel.org/lkml/1596812929.lz7fuo8r2w.none@localhost/Suggested-by:
Thadeu Lima de Souza Cascardo <cascardo@canonical.com> Fixes: c0029de5 ("net/scm: Regularize compat handling of scm_detach_fds()") Tested-by:
Kees Cook <keescook@chromium.org>
-
git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/dmaengineLinus Torvalds authored
Pull dmaengine updates from Vinod Koul: "Core: - Support out of order dma completion - Support for repeating transaction New controllers: - Support for Actions S700 DMA engine - Renesas R8A774E1, r8a7742 controller binding - New driver for Xilinx DPDMA controller Other: - Support of out of order dma completion in idxd driver - W=1 warning cleanup of subsystem - Updates to ti-k3-dma, dw, idxd drivers" * tag 'dmaengine-5.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/dmaengine: (68 commits) dmaengine: dw: Don't include unneeded header to platform data header dmaengine: Actions: Add support for S700 DMA engine dmaengine: Actions: get rid of bit fields from dma descriptor dt-bindings: dmaengine: convert Actions Semi Owl SoCs bindings to yaml dmaengine: idxd: add missing invalid flags field to completion dmaengine: dw: Initialize max_sg_burst capability dmaengine: dw: Introduce max burst length hw config dmaengine: dw: Initialize min and max burst DMA device capability dmaengine: dw: Set DMA device max segment size parameter dmaengine: dw: Take HC_LLP flag into account for noLLP auto-config dmaengine: Introduce DMA-device device_caps callback dmaengine: Introduce max SG burst capability dmaengine: Introduce min burst length capability dt-bindings: dma: dw: Add max burst transaction length property dt-bindings: dma: dw: Convert DW DMAC to DT binding dmaengine: ti: k3-udma: Query throughput level information from hardware dmaengine: ti: k3-udma: Use defines for capabilities register parsing dmaengine: xilinx: dpdma: Fix kerneldoc warning dmaengine: xilinx: dpdma: add missing kernel doc dmaengine: xilinx: dpdma: remove comparison of unsigned expression ...
-
Linus Torvalds authored
Merge misc updates from Andrew Morton: - a few MM hotfixes - kthread, tools, scripts, ntfs and ocfs2 - some of MM Subsystems affected by this patch series: kthread, tools, scripts, ntfs, ocfs2 and mm (hofixes, pagealloc, slab-generic, slab, slub, kcsan, debug, pagecache, gup, swap, shmem, memcg, pagemap, mremap, mincore, sparsemem, vmalloc, kasan, pagealloc, hugetlb and vmscan). * emailed patches from Andrew Morton <akpm@linux-foundation.org>: (162 commits) mm: vmscan: consistent update to pgrefill mm/vmscan.c: fix typo khugepaged: khugepaged_test_exit() check mmget_still_valid() khugepaged: retract_page_tables() remember to test exit khugepaged: collapse_pte_mapped_thp() protect the pmd lock khugepaged: collapse_pte_mapped_thp() flush the right range mm/hugetlb: fix calculation of adjust_range_if_pmd_sharing_possible mm: thp: replace HTTP links with HTTPS ones mm/page_alloc: fix memalloc_nocma_{save/restore} APIs mm/page_alloc.c: skip setting nodemask when we are in interrupt mm/page_alloc: fallbacks at most has 3 elements mm/page_alloc: silence a KASAN false positive mm/page_alloc.c: remove unnecessary end_bitidx for [set|get]_pfnblock_flags_mask() mm/page_alloc.c: simplify pageblock bitmap access mm/page_alloc.c: extract the common part in pfn_to_bitidx() mm/page_alloc.c: replace the definition of NR_MIGRATETYPE_BITS with PB_migratetype_bits mm/shuffle: remove dynamic reconfiguration mm/memory_hotplug: document why shuffle_zone() is relevant mm/page_alloc: remove nr_free_pagecache_pages() mm: remove vm_total_pages ... -
Shakeel Butt authored
The vmstat pgrefill is useful together with pgscan and pgsteal stats to measure the reclaim efficiency. However vmstat's pgrefill is not updated consistently at system level. It gets updated for both global and memcg reclaim however pgscan and pgsteal are updated for only global reclaim. So, update pgrefill only for global reclaim. If someone is interested in the stats representing both system level as well as memcg level reclaim, then consult the root memcg's memory.stat instead of /proc/vmstat. Signed-off-by:
Shakeel Butt <shakeelb@google.com> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Acked-by:
Yafang Shao <laoar.shao@gmail.com> Acked-by:
Roman Gushchin <guro@fb.com> Acked-by:
Chris Down <chris@chrisdown.name> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Michal Hocko <mhocko@kernel.org> Link: http://lkml.kernel.org/r/20200711011459.1159929-1-shakeelb@google.comSigned-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
dylan-meiners authored
Change "optizimation" to "optimization". Signed-off-by:
dylan-meiners <spacct.spacct@gmail.com> Signed-off-by:
David Hildenbrand <david@redhat.com> Link: http://lkml.kernel.org/r/20200609185144.10049-1-spacct.spacct@gmail.comSigned-off-by:
-
Hugh Dickins authored
Move collapse_huge_page()'s mmget_still_valid() check into khugepaged_test_exit() itself. collapse_huge_page() is used for anon THP only, and earned its mmget_still_valid() check because it inserts a huge pmd entry in place of the page table's pmd entry; whereas collapse_file()'s retract_page_tables() or collapse_pte_mapped_thp() merely clears the page table's pmd entry. But core dumping without mmap lock must have been as open to mistaking a racily cleared pmd entry for a page table at physical page 0, as exit_mmap() was. And we certainly have no interest in mapping as a THP once dumping core. Fixes: 59ea6d06 ("coredump: fix race condition between collapse_huge_page() and core dumping") Signed-off-by:
Hugh Dickins <hughd@google.com> Signed-off-by:
-
Hugh Dickins authored
Only once have I seen this scenario (and forgot even to notice what forced the eventual crash): a sequence of "BUG: Bad page map" alerts from vm_normal_page(), from zap_pte_range() servicing exit_mmap(); pmd:00000000, pte values corresponding to data in physical page 0. The pte mappings being zapped in this case were supposed to be from a huge page of ext4 text (but could as well have been shmem): my belief is that it was racing with collapse_file()'s retract_page_tables(), found *pmd pointing to a page table, locked it, but *pmd had become 0 by the time start_pte was decided. In most cases, that possibility is excluded by holding mmap lock; but exit_mmap() proceeds without mmap lock. Most of what's run by khugepaged checks khugepaged_test_exit() after acquiring mmap lock: khugepaged_collapse_pte_mapped_thps() and hugepage_vma_revalidate() do so, for example. But retract_page_tables() did not: fix that. The fix is for retract_page_tables() to check khugepaged_test_exit(), after acquiring mmap lock, before doing anything to the page table. Getting the mmap lock serializes with __mmput(), which briefly takes and drops it in __khugepaged_exit(); then the khugepaged_test_exit() check on mm_users makes sure we don't touch the page table once exit_mmap() might reach it, since exit_mmap() will be proceeding without mmap lock, not expecting anyone to be racing with it. Fixes: f3f0e1d2 ("khugepaged: add support of collapse for tmpfs/shmem pages") Signed-off-by:
Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Mike Kravetz <mike.kravetz@oracle.com> Cc: Song Liu <songliubraving@fb.com> Cc: <stable@vger.kernel.org> [4.8+] Link: http://lkml.kernel.org/r/alpine.LSU.2.11.2008021215400.27773@eggly.anvilsSigned-off-by:
-
Hugh Dickins authored
When retract_page_tables() removes a page table to make way for a huge pmd, it holds huge page lock, i_mmap_lock_write, mmap_write_trylock and pmd lock; but when collapse_pte_mapped_thp() does the same (to handle the case when the original mmap_write_trylock had failed), only mmap_write_trylock and pmd lock are held. That's not enough. One machine has twice crashed under load, with "BUG: spinlock bad magic" and GPF on 6b6b6b6b6b6b6b6b. Examining the second crash, page_vma_mapped_walk_done()'s spin_unlock of pvmw->ptl (serving page_referenced() on a file THP, that had found a page table at *pmd) discovers that the page table page and its lock have already been freed by the time it comes to unlock. Follow the example of retract_page_tables(), but we only need one of huge page lock or i_mmap_lock_write to secure against this: because it's the narrower lock, and because it simplifies collapse_pte_mapped_thp() to know the hpage earlier, choose to rely on huge page lock here. Fixes: 27e1f827 ("khugepaged: enable collapse pmd for pte-mapped THP") Signed-off-by:
-
Hugh Dickins authored
pmdp_collapse_flush() should be given the start address at which the huge page is mapped, haddr: it was given addr, which at that point has been used as a local variable, incremented to the end address of the extent. Found by source inspection while chasing a hugepage locking bug, which I then could not explain by this. At first I thought this was very bad; then saw that all of the page translations that were not flushed would actually still point to the right pages afterwards, so harmless; then realized that I know nothing of how different architectures and models cache intermediate paging structures, so maybe it matters after all - particularly since the page table concerned is immediately freed. Much easier to fix than to think about. Fixes: 27e1f827 ("khugepaged: enable collapse pmd for pte-mapped THP") Signed-off-by:
-
Peter Xu authored
This is found by code observation only. Firstly, the worst case scenario should assume the whole range was covered by pmd sharing. The old algorithm might not work as expected for ranges like (1g-2m, 1g+2m), where the adjusted range should be (0, 1g+2m) but the expected range should be (0, 2g). Since at it, remove the loop since it should not be required. With that, the new code should be faster too when the invalidating range is huge. Mike said: : With range (1g-2m, 1g+2m) within a vma (0, 2g) the existing code will only : adjust to (0, 1g+2m) which is incorrect. : : We should cc stable. The original reason for adjusting the range was to : prevent data corruption (getting wrong page). Since the range is not : always adjusted correctly, the potential for corruption still exists. : : However, I am fairly confident that adjust_range_if_pmd_sharing_possible : is only gong to be called in two cases: : : 1) for a single page : 2) for range == entire vma : : In those cases, the current code should produce the correct results. : : To be safe, let's just cc stable. Fixes: 017b1660 ("mm: migration: fix migration of huge PMD shared pages") Signed-off-by:
Peter Xu <peterx@redhat.com> Signed-off-by:
Mike Kravetz <mike.kravetz@oracle.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Matthew Wilcox <willy@infradead.org> Cc: <stable@vger.kernel.org> Link: http://lkml.kernel.org/r/20200730201636.74778-1-peterx@redhat.comSigned-off-by:
-
Alexander A. Klimov authored
Rationale: Reduces attack surface on kernel devs opening the links for MITM as HTTPS traffic is much harder to manipulate. Deterministic algorithm: For each file: If not .svg: For each line: If doesn't contain `xmlns`: For each link, `http://[^# ]*(?:\w|/)`: If neither `gnu\.org/license`, nor `mozilla\.org/MPL`: If both the HTTP and HTTPS versions return 200 OK and serve the same content: Replace HTTP with HTTPS. [akpm@linux-foundation.org: fix amd.com URL, per Vlastimil] Signed-off-by:Alexander A. Klimov <grandmaster@al2klimov.de> Signed-off-by:
-
Joonsoo Kim authored
Currently, memalloc_nocma_{save/restore} API that prevents CMA area in page allocation is implemented by using current_gfp_context(). However, there are two problems of this implementation. First, this doesn't work for allocation fastpath. In the fastpath, original gfp_mask is used since current_gfp_context() is introduced in order to control reclaim and it is on slowpath. So, CMA area can be allocated through the allocation fastpath even if memalloc_nocma_{save/restore} APIs are used. Currently, there is just one user for these APIs and it has a fallback method to prevent actual problem. Second, clearing __GFP_MOVABLE in current_gfp_context() has a side effect to exclude the memory on the ZONE_MOVABLE for allocation target. To fix these problems, this patch changes the implementation to exclude CMA area in page allocation. Main point of this change is using the alloc_flags. alloc_flags is mainly used to control allocation so it fits for excluding CMA area in allocation. Fixes: d7fefcc8 (mm/cma: add PF flag to force non cma alloc) Signed-off-by:Joonsoo Kim <iamjoonsoo.kim@lge.com> Signed-off-by:
Vlastimil Babka <vbabka@suse.cz> Cc: Christoph Hellwig <hch@infradead.org> Cc: Roman Gushchin <guro@fb.com> Cc: Mike Kravetz <mike.kravetz@oracle.com> Cc: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com> Cc: Michal Hocko <mhocko@suse.com> Cc: "Aneesh Kumar K . V" <aneesh.kumar@linux.ibm.com> Link: http://lkml.kernel.org/r/1595468942-29687-1-git-send-email-iamjoonsoo.kim@lge.comSigned-off-by:
-
Muchun Song authored
When we are in the interrupt context, it is irrelevant to the current task context. If we use current task's mems_allowed, we can be fair to alloc pages in the fast path and fall back to slow path memory allocation when the current node(which is the current task mems_allowed) does not have enough memory to allocate. In this case, it slows down the memory allocation speed of interrupt context. So we can skip setting the nodemask to allow any node to allocate memory, so that fast path allocation can success. Signed-off-by:
Muchun Song <songmuchun@bytedance.com> Signed-off-by:
Pekka Enberg <penberg@kernel.org> Cc: David Hildenbrand <david@redhat.com> Link: http://lkml.kernel.org/r/20200706025921.53683-1-songmuchun@bytedance.comSigned-off-by:
-
Wei Yang authored
MIGRAGE_TYPES is used to be the mark of end and there are at most 3 elements for the one dimension array. Reduce to 3 to save little memory. Signed-off-by:
Wei Yang <richard.weiyang@linux.alibaba.com> Signed-off-by:
-
Qian Cai authored
kernel_init_free_pages() will use memset() on s390 to clear all pages from kmalloc_order() which will override KASAN redzones because a redzone was setup from the end of the allocation size to the end of the last page. Silence it by not reporting it there. An example of the report is, BUG: KASAN: slab-out-of-bounds in __free_pages_ok Write of size 4096 at addr 000000014beaa000 Call Trace: show_stack+0x152/0x210 dump_stack+0x1f8/0x248 print_address_description.isra.13+0x5e/0x4d0 kasan_report+0x130/0x178 check_memory_region+0x190/0x218 memset+0x34/0x60 __free_pages_ok+0x894/0x12f0 kfree+0x4f2/0x5e0 unpack_to_rootfs+0x60e/0x650 populate_rootfs+0x56/0x358 do_one_initcall+0x1f4/0xa20 kernel_init_freeable+0x758/0x7e8 kernel_init+0x1c/0x170 ret_from_fork+0x24/0x28 Memory state around the buggy address: 000000014bea9f00: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 000000014bea9f80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 >000000014beaa000: 03 fe fe fe fe fe fe fe fe fe fe fe fe fe fe fe ^ 000000014beaa080: fe fe fe fe fe fe fe fe fe fe fe fe fe fe fe fe 000000014beaa100: fe fe fe fe fe fe fe fe fe fe fe fe fe fe Fixes: 6471384a ("mm: security: introduce init_on_alloc=1 and init_on_free=1 boot options") Signed-off-by:Qian Cai <cai@lca.pw> Signed-off-by:
Vasily Gorbik <gor@linux.ibm.com> Acked-by:
-
Wei Yang authored
After previous cleanup, the end_bitidx is not necessary any more. Signed-off-by:
-
Wei Yang authored
Due to commit e58469ba ("mm: page_alloc: use word-based accesses for get/set pageblock bitmaps"), pageblock bitmap is accessed with word-based access. This operation could be simplified a little. Intuitively, if we want to get a bit range [start_idx, end_idx] in a word, we can do like this: mask = (1 << (end_bitidx - start_bitidx + 1)) - 1; ret = (word >> start_idx) & mask; And also if we want to set a bit range [start_idx, end_idx] with flags, we can do the same by just shift start_bitidx. By doing so we reduce some instructions for these two helper functions: Before Patched set_pfnblock_flags_mask 209 198(-5%) get_pfnblock_flags_mask 101 87(-13%) Since the syntax is changed a little, we need to check the whole 4-bit migrate_type instead of part of it. Signed-off-by:
-
Wei Yang authored
The return value calculation is the same both for SPARSEMEM or not. Just take it out. Signed-off-by:
-
Wei Yang authored
We already have the definition of PB_migratetype_bits and current NR_MIGRATETYPE_BITS looks like a cyclic definition. Just use PB_migratetype_bits is enough. Signed-off-by:
-
David Hildenbrand authored
Commit e900a918 ("mm: shuffle initial free memory to improve memory-side-cache utilization") promised "autodetection of a memory-side-cache (to be added in a follow-on patch)" over a year ago. The original series included patches [1], however, they were dropped during review [2] to be followed-up later. Due to lack of platforms that publish an HMAT, autodetection is currently not implemented. However, manual activation is actively used [3]. Let's simplify for now and re-add when really (ever?) needed. [1] https://lkml.kernel.org/r/154510700291.1941238.817190985966612531.stgit@dwillia2-desk3.amr.corp.intel.com [2] https://lkml.kernel.org/r/154690326478.676627.103843791978176914.stgit@dwillia2-desk3.amr.corp.intel.com [3] https://lkml.kernel.org/r/CAPcyv4irwGUU2x+c6b4L=KbB1dnasNKaaZd6oSpYjL9kfsnROQ@mail.gmail.comSigned-off-by:
Dan Williams <dan.j.williams@intel.com> Acked-by:
Michal Hocko <mhocko@suse.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Michal Hocko <mhocko@suse.com> Cc: Minchan Kim <minchan@kernel.org> Cc: Huang Ying <ying.huang@intel.com> Cc: Wei Yang <richard.weiyang@gmail.com> Cc: Mel Gorman <mgorman@techsingularity.net> Cc: Dan Williams <dan.j.williams@intel.com> Link: http://lkml.kernel.org/r/20200624094741.9918-4-david@redhat.comSigned-off-by:
-
David Hildenbrand authored
It's not completely obvious why we have to shuffle the complete zone - introduced in commit e900a918 ("mm: shuffle initial free memory to improve memory-side-cache utilization") - because some sort of shuffling is already performed when onlining pages via __free_one_page(), placing MAX_ORDER-1 pages either to the head or the tail of the freelist. Let's document why we have to shuffle the complete zone when exposing larger, contiguous physical memory areas to the buddy. Signed-off-by:
-
David Hildenbrand authored
nr_free_pagecache_pages() isn't used outside page_alloc.c anymore - and the name does not really help to understand what's going on. Let's open-code it instead and add a comment. Signed-off-by:
Wei Yang <richard.weiyang@gmail.com> Reviewed-by:
Pankaj Gupta <pankaj.gupta.linux@gmail.com> Reviewed-by:
Mike Rapoport <rppt@linux.ibm.com> Acked-by:
-
David Hildenbrand authored
The global variable "vm_total_pages" is a relic from older days. There is only a single user that reads the variable - build_all_zonelists() - and the first thing it does is update it. Use a local variable in build_all_zonelists() instead and remove the global variable. Signed-off-by:
-
Charan Teja Reddy authored
When boosting is enabled, it is observed that rate of atomic order-0 allocation failures are high due to the fact that free levels in the system are checked with ->watermark_boost offset. This is not a problem for sleepable allocations but for atomic allocations which looks like regression. This problem is seen frequently on system setup of Android kernel running on Snapdragon hardware with 4GB RAM size. When no extfrag event occurred in the system, ->watermark_boost factor is zero, thus the watermark configurations in the system are: _watermark = ( [WMARK_MIN] = 1272, --> ~5MB [WMARK_LOW] = 9067, --> ~36MB [WMARK_HIGH] = 9385), --> ~38MB watermark_boost = 0 After launching some memory hungry applications in Android which can cause extfrag events in the system to an extent that ->watermark_boost can be set to max i.e. default boost factor makes it to 150% of high watermark. _watermark = ( [WMARK_MIN] = 1272, --> ~5MB [WMARK_LOW] = 9067, --> ~36MB [WMARK_HIGH] = 9385), --> ~38MB watermark_boost = 14077, -->~57MB With default system configuration, for an atomic order-0 allocation to succeed, having free memory of ~2MB will suffice. But boosting makes the min_wmark to ~61MB thus for an atomic order-0 allocation to be successful system should have minimum of ~23MB of free memory(from calculations of zone_watermark_ok(), min = 3/4(min/2)). But failures are observed despite system is having ~20MB of free memory. In the testing, this is reproducible as early as first 300secs since boot and with furtherlowram configurations(<2GB) it is observed as early as first 150secs since boot. These failures can be avoided by excluding the ->watermark_boost in watermark caluculations for atomic order-0 allocations. [akpm@linux-foundation.org: fix comment grammar, reflow comment] [charante@codeaurora.org: fix suggested by Mel Gorman] Link: http://lkml.kernel.org/r/31556793-57b1-1c21-1a9d-22674d9bd938@codeaurora.orgSigned-off-by:Charan Teja Reddy <charante@codeaurora.org> Signed-off-by:
-
Jaewon Kim authored
zone_watermark_fast was introduced by commit 48ee5f36 ("mm, page_alloc: shortcut watermark checks for order-0 pages"). The commit simply checks if free pages is bigger than watermark without additional calculation such like reducing watermark. It considered free cma pages but it did not consider highatomic reserved. This may incur exhaustion of free pages except high order atomic free pages. Assume that reserved_highatomic pageblock is bigger than watermark min, and there are only few free pages except high order atomic free. Because zone_watermark_fast passes the allocation without considering high order atomic free, normal reclaimable allocation like GFP_HIGHUSER will consume all the free pages. Then finally order-0 atomic allocation may fail on allocation. This means watermark min is not protected against non-atomic allocation. The order-0 atomic allocation with ALLOC_HARDER unwantedly can be failed. Additionally the __GFP_MEMALLOC allocation with ALLOC_NO_WATERMARKS also can be failed. To avoid the problem, zone_watermark_fast should consider highatomic reserve. If the actual size of high atomic free is counted accurately like cma free, we may use it. On this patch just use nr_reserved_highatomic. Additionally introduce __zone_watermark_unusable_free to factor out common parts between zone_watermark_fast and __zone_watermark_ok. This is an example of ALLOC_HARDER allocation failure using v4.19 based kernel. Binder:9343_3: page allocation failure: order:0, mode:0x480020(GFP_ATOMIC), nodemask=(null) Call trace: [<ffffff8008f40f8c>] dump_stack+0xb8/0xf0 [<ffffff8008223320>] warn_alloc+0xd8/0x12c [<ffffff80082245e4>] __alloc_pages_nodemask+0x120c/0x1250 [<ffffff800827f6e8>] new_slab+0x128/0x604 [<ffffff800827b0cc>] ___slab_alloc+0x508/0x670 [<ffffff800827ba00>] __kmalloc+0x2f8/0x310 [<ffffff80084ac3e0>] context_struct_to_string+0x104/0x1cc [<ffffff80084ad8fc>] security_sid_to_context_core+0x74/0x144 [<ffffff80084ad880>] security_sid_to_context+0x10/0x18 [<ffffff800849bd80>] selinux_secid_to_secctx+0x20/0x28 [<ffffff800849109c>] security_secid_to_secctx+0x3c/0x70 [<ffffff8008bfe118>] binder_transaction+0xe68/0x454c Mem-Info: active_anon:102061 inactive_anon:81551 isolated_anon:0 active_file:59102 inactive_file:68924 isolated_file:64 unevictable:611 dirty:63 writeback:0 unstable:0 slab_reclaimable:13324 slab_unreclaimable:44354 mapped:83015 shmem:4858 pagetables:26316 bounce:0 free:2727 free_pcp:1035 free_cma:178 Node 0 active_anon:408244kB inactive_anon:326204kB active_file:236408kB inactive_file:275696kB unevictable:2444kB isolated(anon):0kB isolated(file):256kB mapped:332060kB dirty:252kB writeback:0kB shmem:19432kB writeback_tmp:0kB unstable:0kB all_unreclaimable? no Normal free:10908kB min:6192kB low:44388kB high:47060kB active_anon:409160kB inactive_anon:325924kB active_file:235820kB inactive_file:276628kB unevictable:2444kB writepending:252kB present:3076096kB managed:2673676kB mlocked:2444kB kernel_stack:62512kB pagetables:105264kB bounce:0kB free_pcp:4140kB local_pcp:40kB free_cma:712kB lowmem_reserve[]: 0 0 Normal: 505*4kB (H) 357*8kB (H) 201*16kB (H) 65*32kB (H) 1*64kB (H) 0*128kB 0*256kB 0*512kB 0*1024kB 0*2048kB 0*4096kB = 10236kB 138826 total pagecache pages 5460 pages in swap cache Swap cache stats: add 8273090, delete 8267506, find 1004381/4060142 This is an example of ALLOC_NO_WATERMARKS allocation failure using v4.14 based kernel. kswapd0: page allocation failure: order:0, mode:0x140000a(GFP_NOIO|__GFP_HIGHMEM|__GFP_MOVABLE), nodemask=(null) kswapd0 cpuset=/ mems_allowed=0 CPU: 4 PID: 1221 Comm: kswapd0 Not tainted 4.14.113-18770262-userdebug #1 Call trace: [<0000000000000000>] dump_backtrace+0x0/0x248 [<0000000000000000>] show_stack+0x18/0x20 [<0000000000000000>] __dump_stack+0x20/0x28 [<0000000000000000>] dump_stack+0x68/0x90 [<0000000000000000>] warn_alloc+0x104/0x198 [<0000000000000000>] __alloc_pages_nodemask+0xdc0/0xdf0 [<0000000000000000>] zs_malloc+0x148/0x3d0 [<0000000000000000>] zram_bvec_rw+0x410/0x798 [<0000000000000000>] zram_rw_page+0x88/0xdc [<0000000000000000>] bdev_write_page+0x70/0xbc [<0000000000000000>] __swap_writepage+0x58/0x37c [<0000000000000000>] swap_writepage+0x40/0x4c [<0000000000000000>] shrink_page_list+0xc30/0xf48 [<0000000000000000>] shrink_inactive_list+0x2b0/0x61c [<0000000000000000>] shrink_node_memcg+0x23c/0x618 [<0000000000000000>] shrink_node+0x1c8/0x304 [<0000000000000000>] kswapd+0x680/0x7c4 [<0000000000000000>] kthread+0x110/0x120 [<0000000000000000>] ret_from_fork+0x10/0x18 Mem-Info: active_anon:111826 inactive_anon:65557 isolated_anon:0\x0a active_file:44260 inactive_file:83422 isolated_file:0\x0a unevictable:4158 dirty:117 writeback:0 unstable:0\x0a slab_reclaimable:13943 slab_unreclaimable:43315\x0a mapped:102511 shmem:3299 pagetables:19566 bounce:0\x0a free:3510 free_pcp:553 free_cma:0 Node 0 active_anon:447304kB inactive_anon:262228kB active_file:177040kB inactive_file:333688kB unevictable:16632kB isolated(anon):0kB isolated(file):0kB mapped:410044kB d irty:468kB writeback:0kB shmem:13196kB writeback_tmp:0kB unstable:0kB all_unreclaimable? no Normal free:14040kB min:7440kB low:94500kB high:98136kB reserved_highatomic:32768KB active_anon:447336kB inactive_anon:261668kB active_file:177572kB inactive_file:333768k B unevictable:16632kB writepending:480kB present:4081664kB managed:3637088kB mlocked:16632kB kernel_stack:47072kB pagetables:78264kB bounce:0kB free_pcp:2280kB local_pcp:720kB free_cma:0kB [ 4738.329607] lowmem_reserve[]: 0 0 Normal: 860*4kB (H) 453*8kB (H) 180*16kB (H) 26*32kB (H) 34*64kB (H) 6*128kB (H) 2*256kB (H) 0*512kB 0*1024kB 0*2048kB 0*4096kB = 14232kB This is trace log which shows GFP_HIGHUSER consumes free pages right before ALLOC_NO_WATERMARKS. <...>-22275 [006] .... 889.213383: mm_page_alloc: page=00000000d2be5665 pfn=970744 order=0 migratetype=0 nr_free=3650 gfp_flags=GFP_HIGHUSER|__GFP_ZERO <...>-22275 [006] .... 889.213385: mm_page_alloc: page=000000004b2335c2 pfn=970745 order=0 migratetype=0 nr_free=3650 gfp_flags=GFP_HIGHUSER|__GFP_ZERO <...>-22275 [006] .... 889.213387: mm_page_alloc: page=00000000017272e1 pfn=970278 order=0 migratetype=0 nr_free=3650 gfp_flags=GFP_HIGHUSER|__GFP_ZERO <...>-22275 [006] .... 889.213389: mm_page_alloc: page=00000000c4be79fb pfn=970279 order=0 migratetype=0 nr_free=3650 gfp_flags=GFP_HIGHUSER|__GFP_ZERO <...>-22275 [006] .... 889.213391: mm_page_alloc: page=00000000f8a51d4f pfn=970260 order=0 migratetype=0 nr_free=3650 gfp_flags=GFP_HIGHUSER|__GFP_ZERO <...>-22275 [006] .... 889.213393: mm_page_alloc: page=000000006ba8f5ac pfn=970261 order=0 migratetype=0 nr_free=3650 gfp_flags=GFP_HIGHUSER|__GFP_ZERO <...>-22275 [006] .... 889.213395: mm_page_alloc: page=00000000819f1cd3 pfn=970196 order=0 migratetype=0 nr_free=3650 gfp_flags=GFP_HIGHUSER|__GFP_ZERO <...>-22275 [006] .... 889.213396: mm_page_alloc: page=00000000f6b72a64 pfn=970197 order=0 migratetype=0 nr_free=3650 gfp_flags=GFP_HIGHUSER|__GFP_ZERO kswapd0-1207 [005] ...1 889.213398: mm_page_alloc: page= (null) pfn=0 order=0 migratetype=1 nr_free=3650 gfp_flags=GFP_NOWAIT|__GFP_HIGHMEM|__GFP_NOWARN|__GFP_MOVABLE [jaewon31.kim@samsung.com: remove redundant code for high-order] Link: http://lkml.kernel.org/r/20200623035242.27232-1-jaewon31.kim@samsung.comReported-by:
Yong-Taek Lee <ytk.lee@samsung.com> Suggested-by:
Minchan Kim <minchan@kernel.org> Signed-off-by:
Jaewon Kim <jaewon31.kim@samsung.com> Signed-off-by:
Baoquan He <bhe@redhat.com> Acked-by:
Mel Gorman <mgorman@techsingularity.net> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Yong-Taek Lee <ytk.lee@samsung.com> Cc: Michal Hocko <mhocko@kernel.org> Link: http://lkml.kernel.org/r/20200619235958.11283-1-jaewon31.kim@samsung.comSigned-off-by:
-
Vlastimil Babka authored
Hugh noted that task_capc() could use unlikely(), as most of the time there is no capture in progress and we are in page freeing hot path. Indeed adding unlikely() produces assembly that better matches the assumption and moves all the tests away from the hot path. I have also noticed that we don't need to test for cc->direct_compaction as the only place we set current->task_capture is compact_zone_order() which also always sets cc->direct_compaction true. Suggested-by:
Hugh Dickins <hughd@googlecom> Acked-by:
-
Andrey Konovalov authored
Use OOB_TAG_OFF as access offset to land the access into the next granule. Suggested-by:
Walter Wu <walter-zh.wu@mediatek.com> Signed-off-by:
Andrey Konovalov <andreyknvl@google.com> Signed-off-by:
-
Andrey Konovalov authored
Use CONFIG_KASAN_STACK to enable stack tagging. Note, that HWASAN short granules [1] are disabled. Supporting those will require more kernel changes. [1] https://clang.llvm.org/docs/HardwareAssistedAddressSanitizerDesign.htmlSigned-off-by:
-
Andrey Konovalov authored
This patch prepares Software Tag-Based KASAN for stack tagging support. With stack tagging enabled, KASAN tags stack variable in each function in its prologue. In start_kernel() stack variables get tagged before KASAN is enabled via setup_arch()->kasan_init(). As the result the tags for start_kernel()'s stack variables end up in the temporary shadow memory. Later when KASAN gets enabled, switched to normal shadow, and starts checking tags, this leads to false-positive reports, as proper tags are missing in normal shadow. Disable KASAN instrumentation for start_kernel(). Also disable it for arm64's setup_arch() as a precaution (it doesn't have any stack variables right now). [andreyknvl@google.com: reorder attributes for start_kernel()] Link: http://lkml.kernel.org/r/26fb6165a17abcf61222eda5184c030fb6b133d1.1596544734.git.andreyknvl@google.comSigned-off-by:
-
Andrey Konovalov authored
When CONFIG_EFI is not enabled, we might get an undefined reference to efi_enter_virtual_mode() error, if this efi_enabled() call isn't inlined into start_kernel(). This happens in particular, if start_kernel() is annodated with __no_sanitize_address. Reported-by:
kernel test robot <lkp@intel.com> Signed-off-by:
Ard Biesheuvel <ardb@kernel.org> Cc: Alexander Potapenko <glider@google.com> Cc: Andrey Ryabinin <aryabinin@virtuozzo.com> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Dmitry Vyukov <dvyukov@google.com> Cc: Elena Petrova <lenaptr@google.com> Cc: Marco Elver <elver@google.com> Cc: Vincenzo Frascino <vincenzo.frascino@arm.com> Cc: Walter Wu <walter-zh.wu@mediatek.com> Link: http://lkml.kernel.org/r/6514652d3a32d3ed33d6eb5c91d0af63bf0d1a0c.1596544734.git.andreyknvl@google.comSigned-off-by:
-
Andrey Konovalov authored
Patch series "kasan: support stack instrumentation for tag-based mode", v2. This patch (of 5): Prepare Software Tag-Based KASAN for stack tagging support. With Tag-Based KASAN when kernel stacks are allocated via pagealloc (which happens when CONFIG_VMAP_STACK is not enabled), they get tagged. KASAN instrumentation doesn't expect the sp register to be tagged, and this leads to false-positive reports. Fix by resetting the tag of kernel stack pointers after allocation. Signed-off-by:
-
Walter Wu authored
We use tag-based KASAN, then KASAN unit tests don't detect out-of-bounds memory access. They need to be fixed. With tag-based KASAN, the state of each 16 aligned bytes of memory is encoded in one shadow byte and the shadow value is tag of pointer, so we need to read next shadow byte, the shadow value is not equal to tag value of pointer, so that tag-based KASAN will detect out-of-bounds memory access. [walter-zh.wu@mediatek.com: use KASAN_SHADOW_SCALE_SIZE instead of 13] Link: http://lkml.kernel.org/r/20200708132524.11688-1-walter-zh.wu@mediatek.comSuggested-by:
Dmitry Vyukov <dvyukov@google.com> Signed-off-by:
-
