An error occurred fetching the project authors.
- 07 May, 2013 1 commit
-
-
Alistair Popple authored
This patch adds a new udbg early debug console which utilises statically defined input and output buffers stored within the kernel BSS. It is primarily designed to assist with bring up of new hardware which may not have a working console but which has a method of reading/writing kernel memory. This version incorporates comments made by Ben H (thanks!). Changes from v1: - Add memory barriers. - Ensure updating of read/write positions is atomic. Signed-off-by: Alistair Popple <alistair@popple.id.au> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
-
- 10 Jan, 2013 2 commits
-
-
Anton Blanchard authored
Finally remove the two level TOC and build with -mcmodel=medium. Unfortunately we can't build modules with -mcmodel=medium due to the tricks the kernel module loader plays with percpu data: # -mcmodel=medium breaks modules because it uses 32bit offsets from # the TOC pointer to create pointers where possible. Pointers into the # percpu data area are created by this method. # # The kernel module loader relocates the percpu data section from the # original location (starting with 0xd...) to somewhere in the base # kernel percpu data space (starting with 0xc...). We need a full # 64bit relocation for this to work, hence -mcmodel=large. On older kernels we fall back to the two level TOC (-mminimal-toc) Signed-off-by: Anton Blanchard <anton@samba.org> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
-
Vinh Nguyen Huu Tuong authored
This patch consists of: - Add driver for OCM component - Export OCM Information at /sys/kernel/debug/ppc4xx_ocm/info Signed-off-by: Vinh Nguyen Huu Tuong <vhtnguyen@apm.com> Acked-by: Josh Boyer <jwboyer@gmail.com> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
-
- 03 Jan, 2013 1 commit
-
-
Philippe De Muyter authored
The bestcomm dma hardware, and some of its users like the FEC ethernet component, is used in different FreeScale parts, including non-powerpc parts like the ColdFire MCF547x & MCF548x families. Don't keep the driver hidden in arch/powerpc where it is inaccessible for other arches. .c files are moved to drivers/dma/bestcomm, while .h files are moved to include/linux/fsl/bestcomm. Makefiles, Kconfigs and #include directives are updated for the new file locations. Tested by recompiling for MPC5200 with all bestcomm users enabled. Signed-off-by: Philippe De Muyter <phdm@macqel.be> Signed-off-by: Anatolij Gustschin <agust@denx.de>
-
- 12 Sep, 2012 1 commit
-
-
Varun Sethi authored
All SOC device error interrupts are muxed and delivered to the core as a single MPIC error interrupt. Currently all the device drivers requiring access to device errors have to register for the MPIC error interrupt as a shared interrupt. With this patch we add interrupt demuxing capability in the mpic driver, allowing device drivers to register for their individual error interrupts. This is achieved by handling error interrupts in a cascaded fashion. MPIC error interrupt is handled by the "error_int_handler", which subsequently demuxes it using the EISR and delivers it to the respective drivers. The error interrupt capability is dependent on the MPIC EIMR register, which was introduced in FSL MPIC version 4.1 (P4080 rev2). So, error interrupt demuxing capability is dependent on the MPIC version and can be used for versions >= 4.1. Signed-off-by: Varun Sethi <Varun.Sethi@freescale.com> Signed-off-by: Bogdan Hamciuc <bogdan.hamciuc@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
-
- 16 Mar, 2012 2 commits
-
-
Jia Hongtao authored
Some MPIC implementations contain one or more blocks of message registers that are used to send messages between cores via IPIs. A simple API has been added to access (get/put, read, write, etc ...) these message registers. The available message registers are initially discovered via nodes in the device tree. A separate commit contains a binding for the message register nodes. Signed-off-by: Meador Inge <meador_inge@mentor.com> Signed-off-by: Jia Hongtao <B38951@freescale.com> Signed-off-by: Li Yang <leoli@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
-
Martyn Welch authored
Move the GE PIC drivers to allow these to be used by non-86xx boards. Signed-off-by: Martyn Welch <martyn.welch@ge.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
-
- 04 Jan, 2012 1 commit
-
-
Prabhakar Kushwaha authored
Integrated Flash Controller supports various flashes like NOR, NAND and other devices using NOR, NAND and GPCM Machine available on it. IFC supports four chip selects. Signed-off-by: Dipen Dudhat <Dipen.Dudhat@freescale.com> Signed-off-by: Scott Wood <scottwood@freescale.com> Signed-off-by: Li Yang <leoli@freescale.com> Signed-off-by: Liu Shuo <b35362@freescale.com> Signed-off-by: Prabhakar Kushwaha <prabhakar@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
-
- 24 Nov, 2011 1 commit
-
-
Liu Gang authored
The Freescale PowerPC RapidIO controller consists of a RapidIO endpoint and a RapidIO message unit(RMU). Or use RapidIO message manager(RMan) to replace the RMU in DPAA architecture. Therefore, we should split the code into two function modules according to the hardware architecture. Add new struct for RMU module, and new initialization function to set up RMU module. This policy is very conducive to adding new module like RMan, or adding multi-ports or message units support. Signed-off-by: Lian Minghuan <Minghuan.Lian@freescale.com> Signed-off-by: Liu Gang <Gang.Liu@freescale.com> Acked-by: Alexandre Bounine <alexandre.bounine@idt.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
-
- 22 Sep, 2011 1 commit
-
-
Wolfram Sang authored
Move the driver to the place where it is expected to be nowadays. Also rename its CONFIG-name to match the rest and adapt the defconfigs. Finally, move selection of REQUIRE_GPIOLIB or WANTS_OPTIONAL_GPIOLIB to the platforms, because this option is per-platform and not per-driver. Signed-off-by: Wolfram Sang <w.sang@pengutronix.de> Cc: Anatolij Gustschin <agust@denx.de> Cc: Grant Likely <grant.likely@secretlab.ca> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Acked-by: Grant Likely <grant.likely@secretlab.ca> Signed-off-by: Anatolij Gustschin <agust@denx.de>
-
- 27 Jun, 2011 1 commit
-
-
Ashish Kalra authored
The Freescale ePAPR reference hypervisor provides interrupt controller services via a hypercall interface, instead of emulating the MPIC controller. This is called the VMPIC. The ePAPR "virtual interrupt controller" provides interrupt controller services for external interrupts. External interrupts received by a partition can come from two sources: - Hardware interrupts - hardware interrupts come from external interrupt lines or on-chip I/O devices. - Virtual interrupts - virtual interrupts are generated by the hypervisor as part of some hypervisor service or hypervisor-created virtual device. Both types of interrupts are processed using the same programming model and same set of hypercalls. Signed-off-by: Ashish Kalra <ashish.kalra@freescale.com> Signed-off-by: Timur Tabi <timur@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
-
- 26 May, 2011 1 commit
-
-
Rupjyoti Sarmah authored
This patch adds MSI support for 440SPe, 460Ex, 460Sx and 405Ex. Signed-off-by: Rupjyoti Sarmah <rsarmah@apm.com> Signed-off-by: Tirumala R Marri <tmarri@apm.com> Acked-by: Josh Boyer <jwboyer@linux.vnet.ibm.com> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
-
- 20 Apr, 2011 2 commits
-
-
Benjamin Herrenschmidt authored
SCOM is a side-band configuration bus implemented on some processors. This code provides a way for code to map and operate on devices via SCOM, while the details of how that is implemented is left up to a SCOM "controller" in the platform code. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Michael Ellerman <michael@ellerman.id.au> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
-
Benjamin Herrenschmidt authored
This is a significant rework of the XICS driver, too significant to conveniently break it up into a series of smaller patches to be honest. The driver is moved to a more generic location to allow new platforms to use it, and is broken up into separate ICP and ICS "backends". For now we have the native and "hypervisor" ICP backends and one common RTAS ICS backend. The driver supports one ICP backend instanciation, and many ICS ones, in order to accomodate future platforms with multiple possibly different interrupt "sources" mechanisms. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
-
- 24 Mar, 2011 1 commit
-
-
Alexandre Bounine authored
1. Add an option to include RapidIO support if the PCI is available. 2. Add FSL_RIO configuration option to enable controller selection. 3. Add RapidIO support option into x86 and MIPS architectures. Signed-off-by: Alexandre Bounine <alexandre.bounine@idt.com> Acked-by: Kumar Gala <galak@kernel.crashing.org> Cc: Matt Porter <mporter@kernel.crashing.org> Cc: Li Yang <leoli@freescale.com> Cc: Thomas Moll <thomas.moll@sysgo.com> Cc: Micha Nelissen <micha@neli.hopto.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
- 29 Nov, 2010 1 commit
-
-
Victor Gallardo authored
Add suspend/resume support for 4xx compatible CPUs. See /sys/power/state for available power states configured in. Add two different idle states (idle-wait and idle-doze) controlled via sysfs. Default is idle-wait. cat /sys/devices/system/cpu/cpu0/idle [wait] doze To save additional power, use idle-doze. echo doze > /sys/devices/system/cpu/cpu0/idle cat /sys/devices/system/cpu/cpu0/idle wait [doze] Signed-off-by: Victor Gallardo <vgallardo@apm.com> Signed-off-by: Josh Boyer <jwboyer@linux.vnet.ibm.com>
-
- 14 Oct, 2010 1 commit
-
-
Harninder Rai authored
It adds cache-sram support in P1/P2 QorIQ platforms as under: * A small abstraction over powerpc's remote heap allocator * Exports mpc85xx_cache_sram_alloc()/free() APIs * Supports only one contiguous SRAM window * Drivers can do the following in Kconfig to use these APIs "select FSL_85XX_CACHE_SRAM if MPC85xx" * Required SRAM size and the offset where SRAM should be mapped must be provided at kernel command line as : cache-sram-size=<value> cache-sram-offset=<offset> Signed-off-by: Harninder Rai <harninder.rai@freescale.com> Signed-off-by: Vivek Mahajan <vivek.mahajan@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
-
- 13 Oct, 2010 1 commit
-
-
matt mooney authored
Replace EXTRA_CFLAGS with ccflags-y and EXTRA_AFLAGS with asflags-y. Signed-off-by: matt mooney <mfm@muteddisk.com> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
-
- 12 Nov, 2009 1 commit
-
-
Anton Vorontsov authored
This patch adds suspend/resume support for MPC8540 and MPC8641D- compatible CPUs. To reach sleep state, we just write the SLP bit into the PM control and status register. So far we don't support Deep Sleep mode as found in newer MPC85xx CPUs (i.e. MPC8536). It can be relatively easy implemented though, and for it we reserve 'mem' suspend type. Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com> Acked-by: Scott Wood <scottwood@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
-
- 17 Jun, 2009 1 commit
-
-
Wolfgang Denk authored
So far, MPC512x used mpc512x_find_ips_freq() to get the bus frequency, while MPC52xx used mpc52xx_find_ipb_freq(). Despite the different clock names (IPS vs. IPB) the code was identical. Use common code for both processor families. Signed-off-by: Wolfgang Denk <wd@denx.de> Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
-
- 16 Jun, 2009 1 commit
-
-
Michael Ellerman authored
Add the option to build the code under arch/powerpc with -Werror. The intention is to make it harder for people to inadvertantly introduce warnings in the arch/powerpc code. It needs to be configurable so that if a warning is introduced, people can easily work around it while it's being fixed. The option is a negative, ie. don't enable -Werror, so that it will be turned on for allyes and allmodconfig builds. The default is n, in the hope that developers will build with -Werror, that will probably lead to some build breaks, I am prepared to be flamed. It's not enabled for math-emu, which is a steaming pile of warnings. Signed-off-by: Michael Ellerman <michael@ellerman.id.au> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
-
- 06 Jun, 2009 1 commit
-
-
Roderick Colenbrander authored
This patch adds support for the Xilinx plbv46-pci-1.03.a PCI host bridge IPcore. Signed-off-by: Roderick Colenbrander <thunderbird2k@gmail.com> Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
-
- 30 Dec, 2008 1 commit
-
-
Anton Vorontsov authored
The driver supports very simple GPIO controllers, that is, when a controller provides just a 'data' register. Such controllers may be found in various BCSRs (Board's FPGAs used to control board's switches, LEDs, chip-selects, Ethernet/USB PHY power, etc). So far we support only 1-byte GPIO banks. Support for other widths may be implemented when/if needed. p.s. To avoid "made up" compatible entries (like compatible = "simple-gpio"), boards must call simple_gpiochip_init() to pass the compatible string. Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
-
- 17 Oct, 2008 1 commit
-
-
Steven A. Falco authored
This patch adds support for the GPIO functions of PPC40x and PPC44x SOCs. Signed-off-by: Steve Falco <sfalco@harris.com> Acked-by: Stefan Roese <sr@denx.de> Acked-by: Sean MacLennan <smaclennan@pikatech.com> Signed-off-by: Josh Boyer <jwboyer@linux.vnet.ibm.com>
-
- 12 Oct, 2008 1 commit
-
-
Josh Boyer authored
There is an old workaround in the sysdev/Makefile for dealing with arch/ppc vs. arch/powerpc compiles. This is no longer needed as arch/ppc is dead. Signed-off-by: Josh Boyer <jwboyer@linux.vnet.ibm.com> Acked-by: Kumar Gala <galak@kernel.crashing.org> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
-
- 23 Sep, 2008 1 commit
-
-
Peter Korsgaard authored
Structured similar to the existing QE GPIO support. Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk> Acked-by: Anton Vorontsov <avorontsov@ru.mvista.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
-
- 20 Aug, 2008 1 commit
-
-
Michael Ellerman authored
There are now two almost identical implementations of an MSI bitmap allocator, one in mpic_msi.c and the other in fsl_msi.c. Merge them together and put the result in msi_bitmap.c. Some of the MPIC bits will remain to provide a nicer interface for the MPIC users. In the process we fix two buglets. The first is that the allocation routines, now msi_bitmap_alloc_hwirqs(), returned an unsigned result, even though they use -1 to indicate allocation failure. Although all the callers were checking correctly, it is much better for the routine to just return an int. At least until someone wants > ~2 billion MSIs. The second buglet is that the device tree reservation logic only allowed power-of-two reservations. AFAICT that didn't effect any existing code but it's nicer if we can reserve arbitrary irqs from MSI use. We also add some selftests, which exposed the two buglets and now test for them, as well as some basic sanity tests. The tests are only built when CONFIG_DEBUG_KERNEL=y. Signed-off-by: Michael Ellerman <michael@ellerman.id.au> Signed-off-by: Paul Mackerras <paulus@samba.org>
-
- 04 Aug, 2008 1 commit
-
-
Kumar Gala authored
Now that arch/ppc is gone and CONFIG_PPC_MERGE is always set, remove the dead code associated with !CONFIG_PPC_MERGE from arch/powerpc and include/asm-powerpc. Signed-off-by: Kumar Gala <galak@kernel.crashing.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
-
- 10 Jun, 2008 2 commits
-
-
Anton Vorontsov authored
This is very trivial patch. We're transitioning to the cpm_muram_* calls. That's it. Less trivial changes: - BD_SC_* defines were defined in the cpm.h and qe.h, so to avoid redefines we remove BD_SC from the qe.h and use cpm.h along with cpm_muram_* prototypes; - qe_muram_dump was unused and thus removed; - added some code to the cpm_common.c to support legacy QE bindings (data-only node name). - For convenience, define qe_* calls to cpm_*. So drivers need not to be changed. Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
-
Anton Vorontsov authored
GTM stands for General-purpose Timers Module and able to generate timer{1,2,3,4} interrupts. These timers are used by the drivers that need time precise interrupts (like for USB transactions scheduling for the Freescale USB Host controller as found in some QE and CPM chips), or these timers could be used as wakeup events from the CPU deep-sleep mode. Things unimplemented: 1. Cascaded (32 bit) timers (1-2, 3-4). This is straightforward to implement when needed, two timers should be marked as "requested" and configured as appropriate. 2. Super-cascaded (64 bit) timers (1-2-3-4). This is also straightforward to implement when needed, all timers should be marked as "requested" and configured as appropriate. Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
-
- 02 Jun, 2008 1 commit
-
-
Jason Jin authored
This MSI driver can be used on 83xx/85xx/86xx board. In this driver, virtual interrupt host and chip were setup. There are 256 MSI interrupts in this host, Every 32 MSI interrupts cascaded to one IPIC/MPIC interrupt. The chip was treated as edge sensitive and some necessary functions were setup for this chip. Before using the MSI interrupt, PCI/PCIE device need to ask for a MSI interrupt in the 256 MSI interrupts. A 256bit bitmap show which MSI interrupt was used, reserve bit in the bitmap can be used to force the device use some designate MSI interrupt in the 256 MSI interrupts. Sometimes this is useful for testing the all the MSI interrupts. The msi-available-ranges property in the dts file was used for this purpose. Signed-off-by: Jason Jin <Jason.jin@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
-
- 16 May, 2008 1 commit
-
-
Scott Wood authored
This adds a function to put a 6xx/7xx/7xxx/83xx family CPU into sleep mode, and return after an interrupt has occurred. It expects to be called with interrupts disabled, and returns with interrupts disabled. Interrupts are enabled while the processor is asleep, but the interrupt that wakes the processor is not handled; it is still pending when this function returns. Signed-off-by: Scott Wood <scottwood@freescale.com> Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: Paul Mackerras <paulus@samba.org>
-
- 17 Apr, 2008 1 commit
-
-
Anton Vorontsov authored
Freescale UPM can be used to adjust localbus timings or to generate orbitrary, pre-programmed "patterns" on the external Localbus signals. This patch implements few routines so drivers could work with UPMs in safe and generic manner. So far there is just one user of these routines: Freescale UPM NAND driver. Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
-
- 26 Mar, 2008 1 commit
-
-
Stefan Roese authored
This patch adds support for the 256k L2 cache found on some IBM/AMCC 4xx PPC's. It introduces a common 4xx SoC file (sysdev/ppc4xx_soc.c) which currently "only" adds the L2 cache init code. Other common 4xx stuff can be added later here. The L2 cache handling code is a copy of Eugene's code in arch/ppc with small modifications. Tested on AMCC Taishan 440GX. Signed-off-by: Stefan Roese <sr@denx.de> Signed-off-by: Josh Boyer <jwboyer@linux.vnet.ibm.com>
-
- 28 Jan, 2008 1 commit
-
-
Jochen Friedrich authored
Rename commproc.[ch] to cpm1.[ch] to be more consistent with cpm2. Also rename cpm2_common.c to cpm2.c as suggested by Scott Wood. Adjust the includes accordingly. Signed-off-by: Jochen Friedrich <jochen@scram.de> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
-
- 25 Jan, 2008 1 commit
-
-
David Gibson authored
This patch extends the Ebony and Walnut platform code to instantiate the existing ds1742 RTC class driver for the DS1743 RTC/NVRAM chip found on both those boards. The patch uses a helper function to scan the device tree and instantiate the appropriate platform_device based on it, so it should be easy to extend for other boards which have mmio mapped RTC chips. Along with this, the device tree binding for the ds1743 chips is tweaked, based on the existing DS1385 OF binding found at: http://playground.sun.com/1275/proposals/Closed/Remanded/Accepted/346-it.txt Although that document covers the NVRAM portion of the chip, whereas here we're interested in the RTC portion, so it's not entirely clear if that's a good model. This implements only RTC class driver support - that is /dev/rtc0, not /dev/rtc, and the low-level get/set time callbacks remain unimplemented. That means in order to get at the clock you will either need a modified version of hwclock which will look at /dev/rtc0, or you'll need to configure udev to symlink rtc0 to rtc. Signed-off-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Josh Boyer <jwboyer@linux.vnet.ibm.com>
-
- 24 Jan, 2008 2 commits
-
-
Kumar Gala authored
Do just enough to move the RapidIO support code for 85xx over from arch/ppc into arch/powerpc and make it still build. Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
-
John Rigby authored
IPIC is not just for 83xx anymore so make it a separate config option. Signed-off-by: John Rigby <jrigby@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
-
- 23 Dec, 2007 1 commit
-
-
Benjamin Herrenschmidt authored
This adds base support code for the 4xx PCI-X bridge. It also provides placeholders for the PCI and PCI-E version but they aren't supported with this patch. The bridges are configured based on device-tree properties. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Josh Boyer <jwboyer@linux.vnet.ibm.com>
-
- 20 Dec, 2007 1 commit
-
-
Olof Johansson authored
Implement MSI support for PA Semi PWRficient platforms. MSI is done through a special range of sources on the openpic controller, and they're unfortunately breaking the usual concepts of how sources are programmed: * The source is calculated as 512 + the value written into the MSI register * The vector for this source is added to the source and reported through IACK This means that for simplicity, it makes much more sense to just set the vector to 0 for the source, since that's really the vector we expect to see from IACK. Also, the affinity/priority registers will affect 16 sources at a time. To avoid most (simple) users from being limited by this, allocate 16 sources per device but use only one. This means that there's a total of 32 sources. If we get usage scenarions that need more sources, the allocator should probably be revised to take an alignment argument and size, not just do natural alignment. Finally, since I'm already touching the MPIC names on pasemi, rename the base one from the somewhat odd " PAS-OPIC " to "PASEMI-OPIC". Signed-off-by: Olof Johansson <olof@lixom.net> Acked-by: Michael Ellerman <michael@ellerman.id.au> Signed-off-by: Paul Mackerras <paulus@samba.org>
-