- 27 Oct, 2009 10 commits
-
-
Roel Kluin authored
Test whether index is within bounds before reading the element Signed-off-by: Roel Kluin <roel.kluin@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
-
Björn Smedman authored
When hostapd injects a frame, e.g. an authentication or association response, mac80211 looks for a suitable access point virtual interface to associate the frame with based on its source address. This makes it possible e.g. to correctly assign sequence numbers to the frames. A small typo in the ethernet address comparison statement caused a failure to find a suitable ap interface. Sequence numbers on such frames where therefore left unassigned causing some clients (especially windows-based 11b/g clients) to reject them and fail to authenticate or associate with the access point. This patch fixes the typo in the address comparison statement. Signed-off-by: Björn Smedman <bjorn.smedman@venatech.se> Reviewed-by: Johannes Berg <johannes@sipsolutions.net> Cc: stable@kernel.org Signed-off-by: John W. Linville <linville@tuxdriver.com>
-
Holger Schurig authored
This fixes the following sparse warnings: $ make modules SUBDIRS=drivers/net/wireless/libertas C=1 CF=-D__CHECK_ENDIAN__ make: Entering directory `/usr/src/linux-wl' CHECK drivers/net/wireless/libertas/if_spi.c drivers/net/wireless/libertas/if_spi.c:137:16: warning: incorrect type in initializer (different base types) drivers/net/wireless/libertas/if_spi.c:137:16: expected unsigned short [unsigned] [usertype] reg_out drivers/net/wireless/libertas/if_spi.c:137:16: got restricted __le16 [usertype] <noident> drivers/net/wireless/libertas/if_spi.c:191:16: warning: incorrect type in initializer (different base types) drivers/net/wireless/libertas/if_spi.c:191:16: expected unsigned short [unsigned] [usertype] reg_out drivers/net/wireless/libertas/if_spi.c:191:16: got restricted __le16 [usertype] <noident> drivers/net/wireless/libertas/if_spi.c:256:24: warning: incorrect type in argument 1 (different base types) drivers/net/wireless/libertas/if_spi.c:256:24: expected restricted __le32 const [usertype] *p drivers/net/wireless/libertas/if_spi.c:256:24: got unsigned int *<noident> drivers/net/wireless/libertas/if_spi.c:243:24: warning: incorrect type in argument 1 (different base types) drivers/net/wireless/libertas/if_spi.c:243:24: expected restricted __le16 const [usertype] *p drivers/net/wireless/libertas/if_spi.c:243:24: got unsigned short *<noident> drivers/net/wireless/libertas/if_spi.c:171:7: warning: incorrect type in assignment (different base types) drivers/net/wireless/libertas/if_spi.c:171:7: expected unsigned short [unsigned] [usertype] buff drivers/net/wireless/libertas/if_spi.c:171:7: got restricted __le16 [usertype] <noident> drivers/net/wireless/libertas/if_spi.c:171:7: warning: incorrect type in assignment (different base types) drivers/net/wireless/libertas/if_spi.c:171:7: expected unsigned short [unsigned] [usertype] buff drivers/net/wireless/libertas/if_spi.c:171:7: got restricted __le16 [usertype] <noident> drivers/net/wireless/libertas/if_spi.c:171:7: warning: incorrect type in assignment (different base types) drivers/net/wireless/libertas/if_spi.c:171:7: expected unsigned short [unsigned] [usertype] buff drivers/net/wireless/libertas/if_spi.c:171:7: got restricted __le16 [usertype] <noident> drivers/net/wireless/libertas/if_spi.c:171:7: warning: incorrect type in assignment (different base types) drivers/net/wireless/libertas/if_spi.c:171:7: expected unsigned short [unsigned] [usertype] buff drivers/net/wireless/libertas/if_spi.c:171:7: got restricted __le16 [usertype] <noident> drivers/net/wireless/libertas/if_spi.c:171:7: warning: incorrect type in assignment (different base types) drivers/net/wireless/libertas/if_spi.c:171:7: expected unsigned short [unsigned] [usertype] buff drivers/net/wireless/libertas/if_spi.c:171:7: got restricted __le16 [usertype] <noident> drivers/net/wireless/libertas/if_spi.c:243:24: warning: incorrect type in argument 1 (different base types) drivers/net/wireless/libertas/if_spi.c:243:24: expected restricted __le16 const [usertype] *p drivers/net/wireless/libertas/if_spi.c:243:24: got unsigned short *<noident> drivers/net/wireless/libertas/if_spi.c:171:7: warning: incorrect type in assignment (different base types) drivers/net/wireless/libertas/if_spi.c:171:7: expected unsigned short [unsigned] [usertype] buff drivers/net/wireless/libertas/if_spi.c:171:7: got restricted __le16 [usertype] <noident> drivers/net/wireless/libertas/if_spi.c:171:7: warning: incorrect type in assignment (different base types) drivers/net/wireless/libertas/if_spi.c:171:7: expected unsigned short [unsigned] [usertype] buff drivers/net/wireless/libertas/if_spi.c:171:7: got restricted __le16 [usertype] <noident> drivers/net/wireless/libertas/if_spi.c:171:7: warning: incorrect type in assignment (different base types) drivers/net/wireless/libertas/if_spi.c:171:7: expected unsigned short [unsigned] [usertype] buff drivers/net/wireless/libertas/if_spi.c:171:7: got restricted __le16 [usertype] <noident> drivers/net/wireless/libertas/if_spi.c:171:7: warning: incorrect type in assignment (different base types) drivers/net/wireless/libertas/if_spi.c:171:7: expected unsigned short [unsigned] [usertype] buff drivers/net/wireless/libertas/if_spi.c:171:7: got restricted __le16 [usertype] <noident> drivers/net/wireless/libertas/if_spi.c:171:7: warning: incorrect type in assignment (different base types) drivers/net/wireless/libertas/if_spi.c:171:7: expected unsigned short [unsigned] [usertype] buff drivers/net/wireless/libertas/if_spi.c:171:7: got restricted __le16 [usertype] <noident> drivers/net/wireless/libertas/if_spi.c:171:7: warning: incorrect type in assignment (different base types) drivers/net/wireless/libertas/if_spi.c:171:7: expected unsigned short [unsigned] [usertype] buff drivers/net/wireless/libertas/if_spi.c:171:7: got restricted __le16 [usertype] <noident> drivers/net/wireless/libertas/if_spi.c:243:24: warning: incorrect type in argument 1 (different base types) drivers/net/wireless/libertas/if_spi.c:243:24: expected restricted __le16 const [usertype] *p drivers/net/wireless/libertas/if_spi.c:243:24: got unsigned short *<noident> drivers/net/wireless/libertas/if_spi.c:171:7: warning: incorrect type in assignment (different base types) drivers/net/wireless/libertas/if_spi.c:171:7: expected unsigned short [unsigned] [usertype] buff drivers/net/wireless/libertas/if_spi.c:171:7: got restricted __le16 [usertype] <noident> drivers/net/wireless/libertas/if_spi.c:171:7: warning: incorrect type in assignment (different base types) drivers/net/wireless/libertas/if_spi.c:171:7: expected unsigned short [unsigned] [usertype] buff drivers/net/wireless/libertas/if_spi.c:171:7: got restricted __le16 [usertype] <noident> drivers/net/wireless/libertas/if_spi.c:243:24: warning: incorrect type in argument 1 (different base types) drivers/net/wireless/libertas/if_spi.c:243:24: expected restricted __le16 const [usertype] *p drivers/net/wireless/libertas/if_spi.c:243:24: got unsigned short *<noident> drivers/net/wireless/libertas/if_spi.c:243:24: warning: incorrect type in argument 1 (different base types) drivers/net/wireless/libertas/if_spi.c:243:24: expected restricted __le16 const [usertype] *p drivers/net/wireless/libertas/if_spi.c:243:24: got unsigned short *<noident> drivers/net/wireless/libertas/if_spi.c:171:7: warning: incorrect type in assignment (different base types) drivers/net/wireless/libertas/if_spi.c:171:7: expected unsigned short [unsigned] [usertype] buff drivers/net/wireless/libertas/if_spi.c:171:7: got restricted __le16 [usertype] <noident> drivers/net/wireless/libertas/if_spi.c:171:7: warning: incorrect type in assignment (different base types) drivers/net/wireless/libertas/if_spi.c:171:7: expected unsigned short [unsigned] [usertype] buff drivers/net/wireless/libertas/if_spi.c:171:7: got restricted __le16 [usertype] <noident> drivers/net/wireless/libertas/if_spi.c:243:24: warning: incorrect type in argument 1 (different base types) drivers/net/wireless/libertas/if_spi.c:243:24: expected restricted __le16 const [usertype] *p drivers/net/wireless/libertas/if_spi.c:243:24: got unsigned short *<noident> Signed-off-by: Holger Schurig <hs4233@mail.mn-solutions.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
-
Andrey Yurovsky authored
Fix a typo in the description of hwmp_route_info_get(), no function changes. Signed-off-by: Andrey Yurovsky <andrey@cozybit.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
-
Johannes Berg authored
When the in-kernel SME gets an association failure from the AP we don't deauthenticate, and thus get into a very confused state which will lead to warnings later on. Fix this by actually deauthenticating when the AP indicates an association failure. (Brought to you by the hacking session at Kernel Summit 2009 in Tokyo, Japan. -- JWL) Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
-
Johannes Berg authored
When association fails, we should stay authenticated, which in mac80211 is represented by the existence of the mlme work struct, so we cannot free that, instead we need to just set it to idle. (Brought to you by the hacking session at Kernel Summit 2009 in Tokyo, Japan. -- JWL) Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
-
Reinette Chatre authored
Recent commit "mac80211: fix logic error ibss merge bssid check" fixed joining of ibss cell when static bssid is provided. In this case ifibss->bssid is set before the cell is joined and comparing that address to a bss should thus always succeed. Unfortunately this change broke the other case of joining a ibss cell without providing a static bssid where the value of ifibss->bssid is not set before the cell is joined. Since ifibss->bssid may be set before or after joining the cell we do not learn anything by comparing it to a known bss. Remove this check. Signed-off-by: Reinette Chatre <reinette.chatre@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
-
Miguel Boton authored
'struct b43_wl' declaration is missing at 'leds.h'. It should be declared to avoid getting some GCC warnings at 'b43_leds_unregister'. Signed-off-by: Miguel Botón <mboton@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
-
Larry Finger authored
"b43: Fix PPC crash in rfkill polling on unload" fixed the bug reported in Bugzilla No. 14181; however, it introduced a new bug. Whenever the radio switch was turned off, it was necessary to unload and reload the driver for it to recognize the switch again. This patch fixes both the original bug in #14181 and the bug introduced by the previous patch. It must be stated, however, that if there is a BCM4306/3 with an rfkill switch (not yet proven), then the driver will need an unload/reload cycle to turn the device back on. Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
-
Benoit PAPILLAULT authored
Signed-off-by: Benoit PAPILLAULT <benoit.papillault@free.fr> Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
-
- 24 Oct, 2009 3 commits
-
-
Eric Dumazet authored
While playing with pktgen, I realized IP ID was not filled and a random value was taken, possibly leaking 2 bytes of kernel memory. We can use an increasing ID, this can help diagnostics anyway. Also clear packet payload, instead of leaking kernel memory. Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Ben Dooks authored
The DM9000B revision ID is 0x1A, not 0x1B as set in the curernt dm9000.h header. Fix bug reported by Paolo Zebelloni. Signed-off-by: Ben Dooks <ben@simtec.co.uk> Signed-off-by: Simtec Linux Team <linux@simtec.co.uk> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Simon Wunderlich authored
The 8110SC rev d chip on our board shows a regression which the 8110SB chip did not have. When inbound traffic is overflowing the receive descriptor queue, "holes" in the ring buffer may occur which lead to a hangup until the buffer is filled again. The packets are than completely processed, but the ring remains porous and no packets are processed until the next overflow. Setting the interface down and up can fix the problem temporary from userspace. For some reason we don't know, this behaviour is not occuring if the RxVlan bit for hardware VLAN untagging is set. There is another "Work around for AMD plateform" in the current code which checks the VLAN status word in receive descriptors, but does never come to effect when hardware VLAN support is enabled. We assume that this is a bug in the chip. The following patch fixes the problem. Without the patch we could reproduce the hang within minutes (given other devices also generating lots of interrupts), without we couldn't reproduce within a few days of long term testing. This version contains minor style adjustments and is sent with mutt which will hopefully not destroy the formatting again. Signed-off-by: Bernhard Schmidt <bernhard.schmidt@saxnet.de> Signed-off-by: Simon Wunderlich <simon.wunderlich@saxnet.de> Acked-by: Francois Romieu <romieu@zoreil.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
- 23 Oct, 2009 9 commits
-
-
Eric Dumazet authored
At this point (ri_tasklet()), RTNL or dev_base_lock are not held, we must use dev_get_by_index() instead of __dev_get_by_index() Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Manuel Lauss authored
fixes the following build failure: CC drivers/net/au1000_eth.o /drivers/net/au1000_eth.c: In function 'au1000_set_settings': /drivers/net/au1000_eth.c:623: error: implicit declaration of function 'capable' /drivers/net/au1000_eth.c:623: error: 'CAP_NET_ADMIN' undeclared (first use in this function) /drivers/net/au1000_eth.c:623: error: (Each undeclared identifier is reported only once /drivers/net/au1000_eth.c:623: error: for each function it appears in. Signed-off-by: Manuel Lauss <manuel.lauss@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Brice Goglin authored
Improve the reporting of myri10ge port type in ethtool, and update for new boards. Signed-off-by: Brice Goglin <brice@myri.com> Signed-off-by: Andrew Gallatin <gallatin@myri.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Arjan van de Ven authored
Commit b6b39e8f (tcp: Try to catch MSG_PEEK bug) added a printk() to the WARN_ON() that's in tcp.c. This patch changes this combination to WARN(); the advantage of WARN() is that the printk message shows up inside the message, so that kerneloops.org will collect the message. In addition, this gets rid of an extra if() statement. Signed-off-by: Arjan van de Ven <arjan@linux.intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Bruce Allan authored
The PHY on 82577/82578 parts needs a soft reset when transitioning to Sx state in order for the PHY write which disables gigabit speed to take effect. Gigabit speed must be disabled in order for the PHY writes to registers on page 800 (the wakeup control registers) to work as expected otherwise the system might not wake via WoL. Signed-off-by: Bruce Allan <bruce.w.allan@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Xiaotian Feng authored
There's a circular locking dependency: ---> isdn_net_get_locked_lp --->lock &nd->queue_lock --->lock &nd->queue->xmit_lock ..................... ---->unlock &nd->queue_lock ---> isdn_net_writebuf_skb (called with &nd->queue->xmit_lock locked) ---->isdn_net_inc_frame_cnt ---->isdn_net_device_busy ----> lock &nd->queue_lock This will trigger lockdep warnings: ======================================================= [ INFO: possible circular locking dependency detected ] 2.6.32-rc4-testing #7 ------------------------------------------------------- ipppd/28379 is trying to acquire lock: (&netdev->queue_lock){......}, at: [<e62ad0fd>] isdn_net_device_busy+0x2c/0x74 [isdn] but task is already holding lock: (&netdev->local->xmit_lock){+.....}, at: [<e62aefc2>] isdn_net_write_super+0x3f/0x6e [isdn] which lock already depends on the new lock. ....... We don't need to lock nd->queue->xmit_lock to protect single isdn_net_lp_busy(). This can fix above lockdep warnings. Reported-and-tested-by: Tilman Schmidt <tilman@imap.cc> Signed-off-by: Xiaotian Feng <xtfeng@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Dhananjay Phadke authored
Old code assumed board config version in the flash to be 1. When this will get changed by tools, driver just refuses to attach. This is unnecessary since driver does not have to parse board config structure directly (maintained by firmware). Signed-off-by: Dhananjay Phadke <dhananjay@netxen.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Amit Kumar Salecha authored
Clear NX_RESETING bit in netxen_tx_timeout_task() so that the firmware watchdog task can catch need_reset request from tx timeout. Signed-off-by: Amit Kumar Salecha <amit.salecha@qlogic.com> Signed-off-by: Dhananjay Phadke <dhananjay@netxen.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Dhananjay Phadke authored
Avoid resetting subsys ID in i2c block. Also remove duplicate check for address tranlsation error. Signed-off-by: Dhananjay Phadke <dhananjay@netxen.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
- 22 Oct, 2009 1 commit
-
-
Joyce Yu authored
niu: VLAN_ETH_HLEN should be used to make sure that the whole MAC header was copied to the head buffer in the Vlan packets case Signed-off-by: Joyce Yu <joyce.yu@sun.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
- 21 Oct, 2009 4 commits
-
-
Ben Dooks authored
In ks8851_set_rx_mode() the case handling IFF_MULTICAST was also setting the RXCR1_AE bit by accident. This meant that all unicast frames where being accepted by the device. Remove RXCR1_AE from this case. Note, RXCR1_AE was also masking a problem with setting the MAC address properly, so needs to be applied after fixing the MAC write order. Fixes a bug reported by Doong, Ping of Micrel. This version of the patch avoids setting RXCR1_ME for all cases. Signed-off-by: Ben Dooks <ben@simtec.co.uk> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Ben Dooks authored
The MAC address register was being written in the wrong order, so add a new address macro to convert mac-address byte to register address and a ks8851_wrreg8() function to write each byte without having to worry about any difficult byte swapping. Fixes a bug reported by Doong, Ping of Micrel. Signed-off-by: Ben Dooks <ben@simtec.co.uk> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Ben Dooks authored
Issue a full soft reset at probe time. This was reported by Doong Ping of Micrel, but no explanation of why this is necessary or what bug it is fixing. Add it as it does not seem to hurt the current driver and ensures that the device is in a known state when we start setting it up. Signed-off-by: Ben Dooks <ben@simtec.co.uk> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Steven King authored
fec_enet_init is called by both fec_probe and fec_resume, so it shouldn't be marked as __init. Signed-off-by: Steven King <sfking@fdwdc.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
- 20 Oct, 2009 9 commits
-
-
Eric Dumazet authored
commit 9e337b0f (net: annotate inet_timewait_sock bitfields) added 4/8 bytes in struct inet_timewait_sock. Fix this by declaring tw_ipv6_offset in the 'flags' bitfield The 14 bits hole is named tw_pad to make it cleary apparent. Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Herbert Xu authored
This patch tries to print out more information when we hit the MSG_PEEK bug in tcp_recvmsg. It's been around since at least 2005 and it's about time that we finally fix it. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Eric Dumazet authored
ipv4/ipv6 setsockopt(IP_MULTICAST_IF) have dubious __dev_get_by_index() calls. This function should be called only with RTNL or dev_base_lock held, or reader could see a corrupt hash chain and eventually enter an endless loop. Fix is to call dev_get_by_index()/dev_put(). If this happens to be performance critical, we could define a new dev_exist_by_index() function to avoid touching dev refcount. Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Dave Young authored
When shutdown ppp connection, lockdep waring about non-static key will happen, it is caused by the lock is not initialized properly at that time. Fix with tuning the lock/skb_queue_head init order [ 94.339261] INFO: trying to register non-static key. [ 94.342509] the code is fine but needs lockdep annotation. [ 94.342509] turning off the locking correctness validator. [ 94.342509] Pid: 0, comm: swapper Not tainted 2.6.31-mm1 #2 [ 94.342509] Call Trace: [ 94.342509] [<c0248fbe>] register_lock_class+0x58/0x241 [ 94.342509] [<c024b5df>] ? __lock_acquire+0xb57/0xb73 [ 94.342509] [<c024ab34>] __lock_acquire+0xac/0xb73 [ 94.342509] [<c024b7fa>] ? lock_release_non_nested+0x17b/0x1de [ 94.342509] [<c024b662>] lock_acquire+0x67/0x84 [ 94.342509] [<c04cd1eb>] ? skb_dequeue+0x15/0x41 [ 94.342509] [<c054a857>] _spin_lock_irqsave+0x2f/0x3f [ 94.342509] [<c04cd1eb>] ? skb_dequeue+0x15/0x41 [ 94.342509] [<c04cd1eb>] skb_dequeue+0x15/0x41 [ 94.342509] [<c054a648>] ? _read_unlock+0x1d/0x20 [ 94.342509] [<c04cd641>] skb_queue_purge+0x14/0x1b [ 94.342509] [<fab94fdc>] l2cap_recv_frame+0xea1/0x115a [l2cap] [ 94.342509] [<c024b5df>] ? __lock_acquire+0xb57/0xb73 [ 94.342509] [<c0249c04>] ? mark_lock+0x1e/0x1c7 [ 94.342509] [<f8364963>] ? hci_rx_task+0xd2/0x1bc [bluetooth] [ 94.342509] [<fab95346>] l2cap_recv_acldata+0xb1/0x1c6 [l2cap] [ 94.342509] [<f8364997>] hci_rx_task+0x106/0x1bc [bluetooth] [ 94.342509] [<fab95295>] ? l2cap_recv_acldata+0x0/0x1c6 [l2cap] [ 94.342509] [<c02302c4>] tasklet_action+0x69/0xc1 [ 94.342509] [<c022fbef>] __do_softirq+0x94/0x11e [ 94.342509] [<c022fcaf>] do_softirq+0x36/0x5a [ 94.342509] [<c022fe14>] irq_exit+0x35/0x68 [ 94.342509] [<c0204ced>] do_IRQ+0x72/0x89 [ 94.342509] [<c02038ee>] common_interrupt+0x2e/0x34 [ 94.342509] [<c024007b>] ? pm_qos_add_requirement+0x63/0x9d [ 94.342509] [<c038e8a5>] ? acpi_idle_enter_bm+0x209/0x238 [ 94.342509] [<c049d238>] cpuidle_idle_call+0x5c/0x94 [ 94.342509] [<c02023f8>] cpu_idle+0x4e/0x6f [ 94.342509] [<c0534153>] rest_init+0x53/0x55 [ 94.342509] [<c0781894>] start_kernel+0x2f0/0x2f5 [ 94.342509] [<c0781091>] i386_start_kernel+0x91/0x96 Reported-by: Oliver Hartkopp <oliver@hartkopp.net> Signed-off-by: Dave Young <hidave.darkstar@gmail.com> Tested-by: Oliver Hartkopp <oliver@hartkopp.net> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Dave Young authored
Due to driver core changes dev_set_drvdata will call kzalloc which should be in might_sleep context, but hci_conn_add will be called in atomic context Like dev_set_name move dev_set_drvdata to work queue function. oops as following: Oct 2 17:41:59 darkstar kernel: [ 438.001341] BUG: sleeping function called from invalid context at mm/slqb.c:1546 Oct 2 17:41:59 darkstar kernel: [ 438.001345] in_atomic(): 1, irqs_disabled(): 0, pid: 2133, name: sdptool Oct 2 17:41:59 darkstar kernel: [ 438.001348] 2 locks held by sdptool/2133: Oct 2 17:41:59 darkstar kernel: [ 438.001350] #0: (sk_lock-AF_BLUETOOTH-BTPROTO_L2CAP){+.+.+.}, at: [<faa1d2f5>] lock_sock+0xa/0xc [l2cap] Oct 2 17:41:59 darkstar kernel: [ 438.001360] #1: (&hdev->lock){+.-.+.}, at: [<faa20e16>] l2cap_sock_connect+0x103/0x26b [l2cap] Oct 2 17:41:59 darkstar kernel: [ 438.001371] Pid: 2133, comm: sdptool Not tainted 2.6.31-mm1 #2 Oct 2 17:41:59 darkstar kernel: [ 438.001373] Call Trace: Oct 2 17:41:59 darkstar kernel: [ 438.001381] [<c022433f>] __might_sleep+0xde/0xe5 Oct 2 17:41:59 darkstar kernel: [ 438.001386] [<c0298843>] __kmalloc+0x4a/0x15a Oct 2 17:41:59 darkstar kernel: [ 438.001392] [<c03f0065>] ? kzalloc+0xb/0xd Oct 2 17:41:59 darkstar kernel: [ 438.001396] [<c03f0065>] kzalloc+0xb/0xd Oct 2 17:41:59 darkstar kernel: [ 438.001400] [<c03f04ff>] device_private_init+0x15/0x3d Oct 2 17:41:59 darkstar kernel: [ 438.001405] [<c03f24c5>] dev_set_drvdata+0x18/0x26 Oct 2 17:41:59 darkstar kernel: [ 438.001414] [<fa51fff7>] hci_conn_init_sysfs+0x40/0xd9 [bluetooth] Oct 2 17:41:59 darkstar kernel: [ 438.001422] [<fa51cdc0>] ? hci_conn_add+0x128/0x186 [bluetooth] Oct 2 17:41:59 darkstar kernel: [ 438.001429] [<fa51ce0f>] hci_conn_add+0x177/0x186 [bluetooth] Oct 2 17:41:59 darkstar kernel: [ 438.001437] [<fa51cf8a>] hci_connect+0x3c/0xfb [bluetooth] Oct 2 17:41:59 darkstar kernel: [ 438.001442] [<faa20e87>] l2cap_sock_connect+0x174/0x26b [l2cap] Oct 2 17:41:59 darkstar kernel: [ 438.001448] [<c04c8df5>] sys_connect+0x60/0x7a Oct 2 17:41:59 darkstar kernel: [ 438.001453] [<c024b703>] ? lock_release_non_nested+0x84/0x1de Oct 2 17:41:59 darkstar kernel: [ 438.001458] [<c028804b>] ? might_fault+0x47/0x81 Oct 2 17:41:59 darkstar kernel: [ 438.001462] [<c028804b>] ? might_fault+0x47/0x81 Oct 2 17:41:59 darkstar kernel: [ 438.001468] [<c033361f>] ? __copy_from_user_ll+0x11/0xce Oct 2 17:41:59 darkstar kernel: [ 438.001472] [<c04c9419>] sys_socketcall+0x82/0x17b Oct 2 17:41:59 darkstar kernel: [ 438.001477] [<c020329d>] syscall_call+0x7/0xb Signed-off-by: Dave Young <hidave.darkstar@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Julian Anastasov authored
Fix TCP_DEFER_ACCEPT conversion between seconds and retransmission to match the TCP SYN-ACK retransmission periods because the time is converted to such retransmissions. The old algorithm selects one more retransmission in some cases. Allow up to 255 retransmissions. Signed-off-by: Julian Anastasov <ja@ssi.bg> Acked-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Julian Anastasov authored
Change SYN-ACK retransmitting code for the TCP_DEFER_ACCEPT users to not retransmit SYN-ACKs during the deferring period if ACK from client was received. The goal is to reduce traffic during the deferring period. When the period is finished we continue with sending SYN-ACKs (at least one) but this time any traffic from client will change the request to established socket allowing application to terminate it properly. Also, do not drop acked request if sending of SYN-ACK fails. Signed-off-by: Julian Anastasov <ja@ssi.bg> Acked-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Julian Anastasov authored
Willy Tarreau and many other folks in recent years were concerned what happens when the TCP_DEFER_ACCEPT period expires for clients which sent ACK packet. They prefer clients that actively resend ACK on our SYN-ACK retransmissions to be converted from open requests to sockets and queued to the listener for accepting after the deferring period is finished. Then application server can decide to wait longer for data or to properly terminate the connection with FIN if read() returns EAGAIN which is an indication for accepting after the deferring period. This change still can have side effects for applications that expect always to see data on the accepted socket. Others can be prepared to work in both modes (with or without TCP_DEFER_ACCEPT period) and their data processing can ignore the read=EAGAIN notification and to allocate resources for clients which proved to have no data to send during the deferring period. OTOH, servers that use TCP_DEFER_ACCEPT=1 as flag (not as a timeout) to wait for data will notice clients that didn't send data for 3 seconds but that still resend ACKs. Thanks to Willy Tarreau for the initial idea and to Eric Dumazet for the review and testing the change. Signed-off-by: Julian Anastasov <ja@ssi.bg> Acked-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
David S. Miller authored
This reverts commit 6d01a026. Julian Anastasov, Willy Tarreau and Eric Dumazet have come up with a more correct way to deal with this. Signed-off-by: David S. Miller <davem@davemloft.net>
-
- 19 Oct, 2009 3 commits
-
-
Tomoki Sekiyama authored
I found a deadlock bug in UNIX domain socket, which makes able to DoS attack against the local machine by non-root users. How to reproduce: 1. Make a listening AF_UNIX/SOCK_STREAM socket with an abstruct namespace(*), and shutdown(2) it. 2. Repeat connect(2)ing to the listening socket from the other sockets until the connection backlog is full-filled. 3. connect(2) takes the CPU forever. If every core is taken, the system hangs. PoC code: (Run as many times as cores on SMP machines.) int main(void) { int ret; int csd; int lsd; struct sockaddr_un sun; /* make an abstruct name address (*) */ memset(&sun, 0, sizeof(sun)); sun.sun_family = PF_UNIX; sprintf(&sun.sun_path[1], "%d", getpid()); /* create the listening socket and shutdown */ lsd = socket(AF_UNIX, SOCK_STREAM, 0); bind(lsd, (struct sockaddr *)&sun, sizeof(sun)); listen(lsd, 1); shutdown(lsd, SHUT_RDWR); /* connect loop */ alarm(15); /* forcely exit the loop after 15 sec */ for (;;) { csd = socket(AF_UNIX, SOCK_STREAM, 0); ret = connect(csd, (struct sockaddr *)&sun, sizeof(sun)); if (-1 == ret) { perror("connect()"); break; } puts("Connection OK"); } return 0; } (*) Make sun_path[0] = 0 to use the abstruct namespace. If a file-based socket is used, the system doesn't deadlock because of context switches in the file system layer. Why this happens: Error checks between unix_socket_connect() and unix_wait_for_peer() are inconsistent. The former calls the latter to wait until the backlog is processed. Despite the latter returns without doing anything when the socket is shutdown, the former doesn't check the shutdown state and just retries calling the latter forever. Patch: The patch below adds shutdown check into unix_socket_connect(), so connect(2) to the shutdown socket will return -ECONREFUSED. Signed-off-by: Tomoki Sekiyama <tomoki.sekiyama.qu@hitachi.com> Signed-off-by: Masanori Yoshida <masanori.yoshida.tv@hitachi.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Thomas Chou authored
This patch fixed the problem of dropped packets due to lost of interrupt requests. We should only clear what was pending at the moment we read the irq source reg. Signed-off-by: Thomas Chou <thomas@wytron.com.tw> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Thomas Chou authored
Signed-off-by: Thomas Chou <thomas@wytron.com.tw> Signed-off-by: David S. Miller <davem@davemloft.net>
-
- 17 Oct, 2009 1 commit
-
-
Randy Dunlap authored
vmxnet3 was using dprintk() for debugging output. This was defined in <linux/dst.h> and was the only thing that was used from that header file. This caused compile errors when CONFIG_BLOCK was not enabled due to bio* and BIO* uses in the header file, so change this driver to use dev_dbg() for debugging output. include/linux/dst.h:520: error: dereferencing pointer to incomplete type include/linux/dst.h:520: error: 'BIO_POOL_BITS' undeclared (first use in this function) include/linux/dst.h:521: error: dereferencing pointer to incomplete type include/linux/dst.h:522: error: dereferencing pointer to incomplete type include/linux/dst.h:525: error: dereferencing pointer to incomplete type make[4]: *** [drivers/net/vmxnet3/vmxnet3_drv.o] Error 1 Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by: Bhavesh Davda <bhavesh@vmware.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-