- Clean up all instances of mixed tab-space indentation
- Clean up sparse build errors
- Add appropriate static's
Signed-off-by: James Smart <James.Smart@emulex.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>

- Fix vport ndlp ref counting errors
- Fix use after free of ndlp structure
- Use the correct flag to check for LOADING setting.
- Fix driver unload bugs (related to shost references) after link down or rscn
- Fix up HBQ initialization
- Fix port_list locking around driver unload.
- Fix references to hostdata as a phba
- Fix GFFID type offset to work correctly with big endian structure.
- Only call pci_disable_msi if the pci_enable_msi succeeded
- Fix vport_delete wait/fail if in discovery
- Put a reference on the nameservers ndlp when performing CT traffic.
- Remove unbalanced hba unlock.
- Fix up HBQ processing
- Fix lpfc debugfs discovery trace output for ELS rsp cmpl
- Send ADISC when rpi is 0
- Stop FDISC retrying forever
- Unable to retrieve correct config parameter for vport
- Fix sli_validate_fcp_iocb, sli_sum_iocb, sli_abort_iocb to be vport-aware.
- Fix index-out-of-range error in iocb. Spotted by Coverity.
Signed-off-by: James Smart <James.Smart@emulex.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>

 - Remove the "management_version" sysfs parameter (was unused)
 - Add HBQ information to lpfc debugfs
 - Change lpfc_npiv_enable name back to lpfc_enable_npiv (internal stds)
 - Remove "issue_lip" attribute from the vports transport template
Signed-off-by: James Smart <James.Smart@emulex.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>

Rework the lpfc_printf_log() macro so that logging is enabled on a
per-vport basis. Used to be on a physical-port basis, thus logging
with large numbers of vports became a mess.  Required redefinition of
the macro, and an update of every use.
Signed-off-by: James Smart <James.Smart@emulex.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>

 - Split attributes up into vport and non-vport attributes.
 - Move vport specific cfg params to vport

Many of the vport-specific behaviors were still global attributes
on the physical port. Move them to the vport itself.
Signed-off-by: James Smart <James.Smart@emulex.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>

Cleans up a lot of bad behaviors that have been in this area a while
Signed-off-by: James Smart <James.Smart@emulex.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>

Error messages and debugfs updates:
 - Fix up GID_FT error messages
 - Enhance debugfs with slow_ring_trace, dumpslim and nodelist information
 - Add log type (and messages) for vport state changes
 - Enhance log messages when retries ELS fail
Signed-off-by: James Smart <James.Smart@emulex.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>

It's better to initialize host->shost_data to zero like
target->starget_data and device->sdev_data.
Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>

This patch adds support for SAS Management Protocol (SMP) passthrough
support via bsg.
Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
Acked-by: Eric Moore <eric.moore@lsi.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>

This reverts d73f5222

The bug that made us increase ESP_BUS_TIMEOUT to 275 turned out to be
a memset bug on 32-bit sparc.

It is better to put this back at the correct timeout value than to
leave it increased when there is no reason for doing so.
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>

 - Delete refereces to HOSTS_C
 - Switch to module_init/module_exit instead of detect/release
 - Don't pass around the host template and rename it to adpt_template
 - Switch from scsi_register/scsi_unregister to scsi_host_alloc,
   scsi_add_host, scsi_scan_host and scsi_host_put.
Signed-off-by: Matthew Wilcox <matthew@wil.cx>
Acked-by: "Salyzyn, Mark" <mark_salyzyn@adaptec.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>

- this patch will fix a panic caused by omitted memory allocation for the nvram.
Signed-off-by: Seokmann Ju <seokmann.ju@qlogic.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>

Not doing this can cause cards less than u160 capable to send out PPR
offers to devices they can't then deliver on ... causing some devices to
get a bit confused.  Fix by capping the start syncrate at the
appropriate level according to the card capabilities.
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>

The SCSI Tape driver uses a semaphore as mutex. Use the mutex API
instead of the (binary) semaphore.
Signed-off-by: Matthias Kaehlcke <matthias.kaehlcke@gmail.com>
Acked-by: Kai Makisara <kai.makisara@kolumbus.fi>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>

This updates sg_io_v4 structure (based on Doug's RFC, release 1.3).

The major changes are:

- add dout_resid field
- increase tag size to 64 bits to comply with SAM-4 and SRP
- add dout_iovec_count and din_iovec_count

dout_iovec_count and din_iovec_count aren't supported now. I'm not
sure whether they will be supported or not but they were added for the
possible future changes.
Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>

Wire up the mpt_debug_level module parameter so you can write to the
/sys/module/mptbase/parameters/mpt_debug_level and have it take effect
in every ioc.
Acked-by: "Moore, Eric" <Eric.Moore@lsi.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>

If you have the libsas with ATA support, it needs libata to function.
The problem is that if you compile in libsas, you can't build libata
as a module (however, vice versa you can).
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>

This patch

* removes struct members that duplicate pci_dev members
* replaces ha->stype usage with ha->pdev->device usage where feasible
Signed-off-by: Jeff Garzik <jeff@garzik.org>
Acked-by: Christoph Hellwig <hch@lst.de>
Acked-by: Achim Leubner <Achim_Leubner@adaptec.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>

Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
Acked-by: Brian King <brking@linux.vnet.ibm.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>

No need to check use_sg since sg_tablesize is set appropriately in the
scsi host template.

Brian King's patch (2a730937) did this
cleanup but the data buffer accessors patch (written before the patch
and merged after it) restored the check.
Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
Acked-by: Brian King <brking@linux.vnet.ibm.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>

- remove the unnecessary map_single path.

- convert to use the new accessors for the sg lists and the
parameters.
Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
Acked-by: Swen Schillig <swen@vnet.ibm.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>

* master.kernel.org:/pub/scm/linux/kernel/git/lethal/sh-2.6.23:
  sh: Fix fs.h removal from mm.h regressions.
  sh: fix get_wchan() for SH kernels without framepointers
  sh: arch/sh/boot - fix shell usage
  rtc: rtc-sh: Correct sh_rtc_set_time() for some SH-3 parts.
  sh: remove support for sh7300 and solution engine 7300
  sh: Add sh to the CC_OPTIMIZE_FOR_SIZE dependencies.
  sh: Kill off virt_to_bus()/bus_to_virt().
  sh: sh-sci - fix SH7708 support
  sh: Restrict DSP support to specific CPUs.
  sh: Silence sq compile warning on sh4 nommu.
  sh: Kill the rest of the SE73180 cruft.
  sh: remove support for sh73180 and solution engine 73180
  sh: remove old broken pint code
  sh: Reclaim beginning of P3 space for vmalloc area.
  sh: Fix Dreamcast DMA issues.
  sh: Add kmap_coherent()/kunmap_coherent() interface for SH-4.

* master.kernel.org:/pub/scm/linux/kernel/git/lethal/sh64-2.6:
  sh64: Kill off virt_to_bus()/bus_to_virt().
  sh64: Fix irq_intc build failure.
  sh64: Fix fs.h removal from mm.h regressions.

Follows the SH change.
Signed-off-by: Paul Mundt <lethal@linux-sh.org>

Needs interrupt.h:

  CC      arch/sh64/kernel/irq_intc.o
arch/sh64/kernel/irq_intc.c: In function 'make_intc_irq':
arch/sh64/kernel/irq_intc.c:179: error: implicit declaration of function 'disable_irq_nosync'
make[1]: *** [arch/sh64/kernel/irq_intc.o] Error 1
Signed-off-by: Paul Mundt <lethal@linux-sh.org>

Signed-off-by: Paul Mundt <lethal@linux-sh.org>

Signed-off-by: Paul Mundt <lethal@linux-sh.org>

* 'upstream-linus' of master.kernel.org:/pub/scm/linux/kernel/git/jgarzik/netdev-2.6:
  Fix a potential NULL pointer dereference in mace_interrupt() in drivers/net/pcmcia/nmclan_cs.c
  PATCH kernel 2.6.22] PCMCIA-NETDEV : modify smc91c92_cs.c to become SMP safe
  S2io: Increment received packet count correctly
  S2io: Fix crash when resetting adapter
  S2io: Mask spurious interrupts
  S2IO: Implementing review comments from old patches
  S2IO: Checking for the return value of pci map function
  S2IO: Removing MSI support from driver
  S2IO: Removing 3 buffer mode support from the driver
  netxen: drop redudant spinlock
  netxen: Fix interrupt handling for multiport adapters
  netxen: re-init station address after h/w init
  tulip: Remove tulip maintainer
  forcedeth: mac address correct
  gfar: Fix modpost warning
  lib8390: comment on locking by Alan Cox
  Fix a potential NULL pointer dereference in write_bulk_callback() in drivers/net/usb/pegasus.c

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/roland/infiniband:
  IB/ipath: Workaround problem of errormask register being overwritten
  IB/ipath: Fix some issues with buffer cancel and sendctrl register update
  IB/ipath: Use faster put_tid_2 routine after initialization
  IB/ipath: Remove unsafe fastrcvint code from interrupt handler
  IB/ehca: Move extern declarations from .c files to .h files
  IB/mlx4: Whitespace fix
  IB/ehca: Fix include order to better match kernel style
  mlx4_core: Remove kfree() in mlx4_mr_alloc() error flow
  RDMA/amso1100: Initialize the wait_queue_head_t in the c2_qp structure

* master.kernel.org:/pub/scm/linux/kernel/git/gregkh/driver-2.6:
  modules: better error messages when modules fail to load due to a sysfs problem.
  kobject: update documentation
  kset: kernel-doc cleanups
  driver core: revert "device" link creation check
  stable_api_nonsense.txt: Disambiguate the use of "this" by using "that" to refer to the syscall interface
  Fix Doc/sysfs-rules typos
  kernel-doc fixes for PCI and drivers/base/
  kobject: put kobject_actions in kobject.h
  kobject: fix link error when CONFIG_HOTPLUG is disabled
  HOWTO: sync Japanese HOWTO
  HOWTO: adjust translation header of Japanese stable_api_nonsense.txt

* master.kernel.org:/pub/scm/linux/kernel/git/gregkh/usb-2.6:
  USB: "sparse" cleanups for usb gadgets
  usb-serial: Fix edgeport regression on non-EPiC devices
  USB: more pxa2xx_udc dead code removal
  USB: NIKON D50 is an unusual device
  USB: drivers/usb/serial/sierra.c: make 3 functions static
  USB: fix BUG: sleeping function called from invalid context at /home/jeremy/hg/xen/paravirt/linux/drivers/usb/core/urb.c:524, in_atomic():1, irqs_disabled():0
  USB: mct_u232: Convert to proper speed handling API
  digi_acceleport: Drag the driver kicking and screaming into coding style
  cp2101: Remove broken termios optimisation, use proper speed API
  USB: Fix a bug in usb_start_wait_urb
  USB: fix scatterlist PIO case (IOMMU)
  USB: fix usb_serial_suspend(): buggy code
  USB: yet another quirky device
  USB: Add CanonScan LiDE30 to the quirk list
  USB: even more quirks
  USB: usb.h kernel-doc additions
  USB: more quirky devices
  USB: Don't let usb-storage steal Blackberry Pearl
  USB: devices misc: Trivial patch to build the IOWARRIOR when it is selected in Kconfig

This helps people when debugging problems like the ones that were in the
recent -mm releases.
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Update kobject documentation:

- Update structure definitions.
- Remove documentation of removed struct subsystem.

(First shot, uevent_ops probably need some documentation as well.)
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Removed kernel-doc marker (/**) from struct kset -- each struct member
still needs annotation.

Corrected one parameter name so that kernel-doc matches the macro.
Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

driver core: revert "device" link creation check

Commit 2ee97caf introduced an extra
check on when to create the "device" symlink. Unfortunately, this
breaks input, so let's revert to the old behaviour.
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Acked-by: Kay Sievers <kay.sievers@vrfy.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

stable_api_nonsense.txt: Disambiguate the use of "this" by using "that" to refer to the syscall interface
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Fix typos only (spelling, grammar, duplicate words, etc.).
Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Cc: Kay Sievers <kay.sievers@vrfy.org
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Fix undocumented function parameters in PCI and drivers/base.

Warning(linux-2.6.23-rc1//drivers/pci/pci.c:1526): No description found for parameter 'rq'
Warning(linux-2.6.23-rc1//drivers/base/firmware_class.c:245): No description found for parameter 'bin_attr'
Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

This prevents the extern declaration in the driver core.

Cc: Kay Sievers <kay.sievers@vrfy.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Leaving kobject_actions[] in kobject_uevent.c, but putting it outside
the #ifdef looks indeed like the best solution to me. This way, we
avoid adding #ifdef CONFIG_HOTPLUG into core.c, when all other
functions called do not need such a thing.
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Cc: Kay Sievers <kay.sievers@vrfy.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>