- 04 Jul, 2010 1 commit
-
-
Joonyoung Shim authored
This adds support for MELPAS MCS5000/MSC5080 touch key controllers. Signed-off-by:
Joonyoung Shim <jy0922.shim@samsung.com> Signed-off-by:
Dmitry Torokhov <dtor@mail.ru>
-
- 03 Jul, 2010 9 commits
-
-
Oliver Neukum authored
As the kernel has no way to know whether a key was released while the system was asleep, keys need to be reported released as the system is resumed, lest autorepeat set in. Signed-off-by:
Oliver Neukum <oneukum@suse.de> Signed-off-by:
-
Anatolij Gustschin authored
ADS7845 is a controller for 5-wire touch screens and somewhat different from 7846. It requires three serial communications to accomplish one complete conversion. Unlike 7846 it doesn't allow Z1-/Z2- position measurement. The patch extends the ads7846 driver to also support ads7845. The packet struct is extended to contain needed command and conversion buffers. ads7846_rx() and ads7846_rx_val() now differentiate between 7845 and 7846 case. ads7846_probe() is modified to setup ads7845 specific command and conversion messages and to switch ads7845 into power-down mode, since this is needed to be prepared to respond to pendown interrupts. Signed-off-by:
Anatolij Gustschin <agust@denx.de> Signed-off-by:
-
Dmitry Torokhov authored
Tested-by:
-
Dmitry Torokhov authored
Suspending and resuming the device should be separate from enabling and disabling it through sysfs attribute and thus should not alter ac->disabled flag. [michael.hennerich@analog.com: various fixups] Tested-by:
Michael Hennerich <michael.hennerich@analog.com> Signed-off-by:
-
Michael Hennerich authored
Some input events users such as Android require BTN_TOUCH events. Implement EV_KEY/BTN_TOUCH and make sure that the release event is not erroneous scheduled without a preceding valid touch. Avoid duplicated BTN_TOUCH events, even though input core filters them. Signed-off-by:
-
Michael Hennerich authored
Signed-off-by:
-
Michael Hennerich authored
Avoid additional addressing overhead incurred by word_data transfers. Signed-off-by:
Mike Frysinger <vapier@gentoo.org> Signed-off-by:
-
Dmitry Torokhov authored
Tested-by:
-
Mike Frysinger authored
The ad7879 driver is using the old bus method of only supporting one at a time (I2C or SPI). So refactor it like the other input drivers that support multiple busses simultaneously. Signed-off-by:
-
- 30 Jun, 2010 2 commits
-
-
Dmitry Torokhov authored
Tested-by:
-
Dmitry Torokhov authored
-
- 28 Jun, 2010 7 commits
-
-
Dan Carpenter authored
We reuse the "i" variable later on so if we goto fail3 or fail4 then "i" will be set to the wrong thing and cause a crash. Signed-off-by:
Dan Carpenter <error27@gmail.com> Signed-off-by:
-
Grazvydas Ignotas authored
gpiolib now has debounce support added in .35, so let's make use of it. This allows to use hardware GPIO debouncing on some platforms like OMAP. In case gpiolib debounce setup fails for some GPIO, the driver will fall back to timer based debouncing, which is what it used before. Signed-off-by:
Grazvydas Ignotas <notasas@gmail.com> Signed-off-by:
-
Petr Štetiar authored
The device is handled by usbtouchscreen driver. Signed-off-by:
Petr Štetiar <ynezz@true.cz> Acked-by:
Jiri Kosina <jkosina@suse.cz> Signed-off-by:
-
Petr Štetiar authored
This patch adds support for the ET&T TC4UM 4-wire USB touchscreen controller and tries to reuse the bits for TC5UH controller in kernel already. Data interface is same. Tested-by:
Roger Pueyo Centelles <rogerpueyo@rogerpueyo.com> Signed-off-by:
-
Anatolij Gustschin authored
On some platforms, for example with GPIO interrupts on mpc5121, it is not possible to configure falling edge interrupts. Specifying irq trigger type in platform data structure allows using ads7846 driver on such platforms. Signed-off-by:
-
Ping Cheng authored
Add support for the two new devices: DTU2231 and DTU1631. Signed-off-by:
Ping Cheng <pingc@wacom.com> Signed-off-by:
-
Axel Lin authored
select_keymap() calls copy_keymap() to allocate a memory for keymap. This patch adds a missing kfree(keymap) in wb_module_init error path. Signed-off-by:
Axel Lin <axel.lin@gmail.com> Signed-off-by:
-
- 25 Jun, 2010 3 commits
-
-
Michael Hennerich authored
Signed-off-by:
-
Michael Hennerich authored
This is a driver for the ADXL345/346 Three-Axis Digital Accelerometers. Signed-off-by:
Chris Verges <chrisv@cyberswitching.com> Signed-off-by:
Luotao Fu <l.fu@pengutronix.de> Signed-off-by:
Barry Song <barry.song@analog.com> Signed-off-by:
-
Xiaolong CHEN authored
A column or row configured as a GPI can be programmed to be part of the key event table and therefore also capable of generating a key event interrupt. A key event interrupt caused by a GPI follows the same process flow as a key event interrupt caused by a key press. GPIs configured as part of the key event table allow single key switches and other GPI interrupts to be monitored. As part of the event table, GPIs are represented by the decimal value 97 (0x61 or 1100001) through the decimal value 114 (0x72 or 1110010). See table below for GPI event number assignments for rows and columns. GPI Event Number Assignments for Rows Row0 Row1 Row2 Row3 Row4 Row5 Row6 Row7 97 98 99 100 101 102 103 104 GPI Event Number Assignments for Cols Col0 Col1 Col2 Col3 Col4 Col5 Col6 Col7 Col8 Col9 105 106 107 108 109 110 111 112 113 114 Signed-off-by:
Xiaolong Chen <xiao-long.chen@motorola.com> Signed-off-by:
Yuanbo Ye <yuan-bo.ye@motorola.com> Signed-off-by:
Tao Hu <taohu@motorola.com> Acked-by:
-
- 23 Jun, 2010 6 commits
-
-
Henrik Rydberg authored
When the client buffer is very small and wraps around a lot, it may well be that a write increases the head such that head == tail. If this happens between the point where a poll is triggered and the actual data is being read, there will be no data to read. This is confusing to applications, which might end up closing the file. This patch solves the problem by making sure the client buffer is never empty after writing to it. Signed-off-by:
Henrik Rydberg <rydberg@euromail.se> Signed-off-by:
-
Henrik Rydberg authored
The MT devices produce a lot of data. Tell the underlying input device approximately how many events will be sent per synchronization, to allow for better buffering. The number is a template based on continuously reporting details for each finger on a single hand. Signed-off-by:
-
Henrik Rydberg authored
The MT devices produce a lot of data. Tell the underlying input device approximately how many events will be sent per synchronization, to allow for better buffering. The number is a template based on continuously reporting details for each finger on a single hand. Signed-off-by:
-
Henrik Rydberg authored
Some devices, in particular MT devices, produce a lot of data. This may lead to overflowing of the event queues in evdev driver, which by default are fairly small. Let the drivers hint the average number of events per packet generated by the device, and use that information when computing the buffer size evdev should use for the device. Signed-off-by:
Chase Douglas <chase.douglas@canonical.com> Signed-off-by:
-
Henrik Rydberg authored
Allocate the event buffer dynamically, and prepare to compute the buffer size in a separate function. This patch defines the size computation to be identical to the current code, and does not contain any logical changes. Signed-off-by:
-
Jiri Slaby authored
Stanse found that tsc is dereferenced earlier than checked for being NULL in tps6507x_ts_remove. Remove the test because there is no way for tsc to be NULL there. Signed-off-by:
Jiri Slaby <jslaby@suse.cz> Signed-off-by:
-
- 12 Jun, 2010 1 commit
-
-
Linus Torvalds authored
-
- 11 Jun, 2010 11 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6Linus Torvalds authored
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6: wimax/i2400m: fix missing endian correction read in fw loader net8139: fix a race at the end of NAPI pktgen: Fix accuracy of inter-packet delay. pkt_sched: gen_estimator: add a new lock net: deliver skbs on inactive slaves to exact matches ipv6: fix ICMP6_MIB_OUTERRORS r8169: fix mdio_read and update mdio_write according to hw specs gianfar: Revive the driver for eTSEC devices (disable timestamping) caif: fix a couple range checks phylib: Add support for the LXT973 phy. net: Print num_rx_queues imbalance warning only when there are allocated queues
-
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/suspend-2.6Linus Torvalds authored
* 'pm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/suspend-2.6: PM / x86: Save/restore MISC_ENABLE register
-
git://git.kernel.org/pub/scm/linux/kernel/git/mason/btrfs-unstableLinus Torvalds authored
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mason/btrfs-unstable: Btrfs: The file argument for fsync() is never null Btrfs: handle ERR_PTR from posix_acl_from_xattr() Btrfs: avoid BUG when dropping root and reference in same transaction Btrfs: prohibit a operation of changing acl's mask when noacl mount option used Btrfs: should add a permission check for setfacl Btrfs: btrfs_lookup_dir_item() can return ERR_PTR Btrfs: btrfs_read_fs_root_no_name() returns ERR_PTRs Btrfs: unwind after btrfs_start_transaction() errors Btrfs: btrfs_iget() returns ERR_PTR Btrfs: handle kzalloc() failure in open_ctree() Btrfs: handle error returns from btrfs_lookup_dir_item() Btrfs: Fix BUG_ON for fs converted from extN Btrfs: Fix null dereference in relocation.c Btrfs: fix remap_file_pages error Btrfs: uninitialized data is check_path_shared() Btrfs: fix fallocate regression Btrfs: fix loop device on top of btrfs
-
git://git.kernel.org/pub/scm/linux/kernel/git/jbarnes/pci-2.6Linus Torvalds authored
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jbarnes/pci-2.6: PCI: clear bridge resource range if BIOS assigned bad one PCI: hotplug/cpqphp, fix NULL dereference Revert "PCI: create function symlinks in /sys/bus/pci/slots/N/" PCI: change resource collision messages from KERN_ERR to KERN_INFO
-
Yinghai Lu authored
Yannick found that video does not work with 2.6.34. The cause of this bug was that the BIOS had assigned the wrong range to the PCI bridge above the video device. Before 2.6.34 the kernel would have shrunk the size of the bridge window, but since d65245c3 PCI: don't shrink bridge resources the kernel will avoid shrinking BIOS ranges. So zero out the old range if we fail to claim it at boot time; this will cause us to allocate a new range at startup, restoring the 2.6.34 behavior. Fixes regression https://bugzilla.kernel.org/show_bug.cgi?id=16009. Reported-by:
Yannick <yannick.roehlly@free.fr> Acked-by:
Bjorn Helgaas <bjorn.helgaas@hp.com> Signed-off-by:
Yinghai Lu <yinghai@kernel.org> Signed-off-by:
Jesse Barnes <jbarnes@virtuousgeek.org>
-
Jiri Slaby authored
There are devices out there which are PCI Hot-plug controllers with compaq PCI IDs, but are not bridges, hence have pdev->subordinate NULL. But cpqphp expects the pointer to be non-NULL. Add a check to the probe function to avoid oopses like: BUG: unable to handle kernel NULL pointer dereference at 00000050 IP: [<f82e3c41>] cpqhpc_probe+0x951/0x1120 [cpqphp] *pdpt = 0000000033779001 *pde = 0000000000000000 ... The device here was: 00:0b.0 PCI Hot-plug controller [0804]: Compaq Computer Corporation PCI Hotplug Controller [0e11:a0f7] (rev 11) Subsystem: Compaq Computer Corporation Device [0e11:a2f8] Signed-off-by:
-
Jesse Barnes authored
This reverts commit 75568f80. Since they're just a convenience anyway, remove these symlinks since they're causing duplicate filename errors in the wild. Acked-by:
Alex Chiang <achiang@canonical.com> Signed-off-by:
-
Bjorn Helgaas authored
We can often deal with PCI resource issues by moving devices around. In that case, there's no point in alarming the user with messages like these. There are many bug reports where the message itself is the only problem, e.g., https://bugs.launchpad.net/ubuntu/+source/linux/+bug/413419 . Signed-off-by:
-
Dan Carpenter authored
The "file" argument for fsync is never null so we can remove this check. What drew my attention here is that 7ea80859: "drop unused dentry argument to ->fsync" introduced an unconditional dereference at the start of the function and that generated a smatch warning. Signed-off-by:
Chris Mason <chris.mason@oracle.com>
-
Dan Carpenter authored
posix_acl_from_xattr() returns both ERR_PTRs and null, but it's OK to pass null values to set_cached_acl() Signed-off-by:
-
Sage Weil authored
If btrfs_ioctl_snap_destroy() deletes a snapshot but finishes with end_transaction(), the cleaner kthread may come in and drop the root in the same transaction. If that's the case, the root's refs still == 1 in the tree when btrfs_del_root() deletes the item, because commit_fs_roots() hasn't updated it yet (that happens during the commit). This wasn't a problem before only because btrfs_ioctl_snap_destroy() would commit the transaction before dropping the dentry reference, so the dead root wouldn't get queued up until after the fs root item was updated in the btree. Since it is not an error to drop the root reference and the root in the same transaction, just drop the BUG_ON() in btrfs_del_root(). Signed-off-by:
Sage Weil <sage@newdream.net> Signed-off-by:
-
