We have checked if ->node is NULL or not, so it is unnecessary to
use BUG_ON() to check again. Remove it.
Signed-off-by: Miao Xie <miaox@cn.fujitsu.com>
Signed-off-by: Josef Bacik <jbacik@fusionio.com>

Signed-off-by: Miao Xie <miaox@cn.fujitsu.com>
Signed-off-by: Josef Bacik <jbacik@fusionio.com>

The root node of the rb-tree may be changed, so we should get it under
the lock. Fix it.
Signed-off-by: Miao Xie <miaox@cn.fujitsu.com>
Signed-off-by: Josef Bacik <jbacik@fusionio.com>

inode_tree_del() will move the tree root into the dead root list, and
then the tree will be destroyed by the cleaner. So if we remove the
delayed node which is cached in the inode after inode_tree_del(),
we may access a freed tree root. Fix it.
Signed-off-by: Miao Xie <miaox@cn.fujitsu.com>
Signed-off-by: Josef Bacik <jbacik@fusionio.com>

We need to set return value explicitly, otherwise we'll lose the error
value.
Signed-off-by: Liu Bo <bo.li.liu@oracle.com>
Signed-off-by: Josef Bacik <jbacik@fusionio.com>

Before applying this patch, we reserved the space for the global reserve
by the minimum unit if we found it is empty, it was unreasonable and
inefficient, because if the global reserve space was depleted, it implied
that the size of the global reserve was too small. In this case, we shoud
update the global reserve and fill it.

Cc: Tsutomu Itoh <t-itoh@jp.fujitsu.com>
Signed-off-by: Miao Xie <miaox@cn.fujitsu.com>
Signed-off-by: Josef Bacik <jbacik@fusionio.com>

If the type of the space we need is different with the global reserve, we
can not steal the space from the global reserve, because we can not allocate
the space from the free space cache that the global reserve points to.

Cc: Tsutomu Itoh <t-itoh@jp.fujitsu.com>
Signed-off-by: Miao Xie <miaox@cn.fujitsu.com>
Signed-off-by: Josef Bacik <jbacik@fusionio.com>

cc: Tsutomu Itoh <t-itoh@jp.fujitsu.com>
Signed-off-by: Miao Xie <miaox@cn.fujitsu.com>
Signed-off-by: Josef Bacik <jbacik@fusionio.com>

It is very likely that there are lots of subvolumes/snapshots in the filesystem,
so if we use global block reservation to do inode cache truncation, we may hog
all the free space that is reserved in global rsv. So it is better that we do
the free space reservation for inode cache truncation by ourselves.

Cc: Tsutomu Itoh <t-itoh@jp.fujitsu.com>
Signed-off-by: Miao Xie <miaox@cn.fujitsu.com>
Signed-off-by: Josef Bacik <jbacik@fusionio.com>

The filesystem with inode cache was forced to be read-only when we umounted it.

Steps to reproduce:
 # mkfs.btrfs -f ${DEV}
 # mount -o inode_cache ${DEV} ${MNT}
 # dd if=/dev/zero of=${MNT}/file1 bs=1M count=8192
 # btrfs fi syn ${MNT}
 # dd if=${MNT}/file1 of=/dev/null bs=1M
 # rm -f ${MNT}/file1
 # btrfs fi syn ${MNT}
 # umount ${MNT}

It is because there was no enough space to do inode cache truncation, and then
we aborted the current transaction.

But no space error is not a serious problem when we write out the inode cache,
and it is safe that we just skip this step if we meet this problem. So we need
not abort the current transaction.
Reported-by: Tsutomu Itoh <t-itoh@jp.fujitsu.com>
Signed-off-by: Miao Xie <miaox@cn.fujitsu.com>
Tested-by: Tsutomu Itoh <t-itoh@jp.fujitsu.com>
Signed-off-by: Josef Bacik <jbacik@fusionio.com>

Raid5 with 3 devices is well defined while the old logic allowed
raid5 only with a minimum of 4 devices when converting the block group
profile via btrfs balance. Creating a raid5 with just three devices
using mkfs.btrfs worked always as expected. This is now fixed and the
whole logic is rewritten.
Signed-off-by: Andreas Philipp <philipp.andreas@gmail.com>
Signed-off-by: Josef Bacik <jbacik@fusionio.com>

In replace_path(), if read_tree_block() fails, we cannot return
directly, we should free some allocated memory otherwise memory
leak happens.

Similar to Wang's "Btrfs: fix possible memory leak in the
find_parent_nodes()" patch, the current commit fixes an issue that
is related to the "Btrfs: fix all callers of read_tree_block"
commit.
Signed-off-by: Stefan Behrens <sbehrens@giantdisaster.de>
Signed-off-by: Josef Bacik <jbacik@fusionio.com>

In the find_parent_nodes(), if read_tree_block() fails, we can
not return directly, we should free some allocated memory otherwise
memory leak happens.
Signed-off-by: Wang Shilong <wangsl-fnst@cn.fujitsu.com>
Signed-off-by: Josef Bacik <jbacik@fusionio.com>

This is not yet supported and causes crashes. One sad user reported
that it destroyed his filesystem.

One failure is in __btrfs_map_block+0xc1f calling kmalloc(0).

0x5f21f is in __btrfs_map_block (fs/btrfs/volumes.c:4923).
4918                            num_stripes = map->num_stripes;
4919                            max_errors = nr_parity_stripes(map);
4920
4921                            raid_map = kmalloc(sizeof(u64) * num_stripes,
4922                                               GFP_NOFS);
4923                            if (!raid_map) {
4924                                    ret = -ENOMEM;
4925                                    goto out;
4926                            }
4927

There might be more issues. Until this is really tested, don't allow
users to start the procedure on RAID5/RAID6 filesystems.
Signed-off-by: Stefan Behrens <sbehrens@giantdisaster.de>
Signed-off-by: Josef Bacik <jbacik@fusionio.com>

Chris hit a bug where we weren't finding extent records when running extent ops.
This is because we use the delayed_ref_head when running the extent op, which
means we can't use the ->type checks to see if we are metadata.  We also lose
the level of the metadata we are working on.  So to fix this we can just check
the ->is_data section of the extent_op, and we can store the level of the buffer
we were modifying in the extent_op.  Thanks,
Signed-off-by: Josef Bacik <jbacik@fusionio.com>

This catches block groups that are too large to properly cache.  We deal with
this case fine, so the warning just confuses users.  Remove the warning.
Thanks,
Signed-off-by: Josef Bacik <jbacik@fusionio.com>

I'm sorry, theres no excuse for this sort of work.  We need to use
root->leafsize since eb may be NULL.  Thanks,
Signed-off-by: Josef Bacik <jbacik@fusionio.com>

The search ioctl skips items that are too large for a result buffer, but
inline items of a certain size occuring before any search result is
found would trigger an overflow and stop the search entirely.

Bug: https://bugzilla.kernel.org/show_bug.cgi?id=57641

Cc: stable@vger.kernel.org
Signed-off-by: Gabriel de Perthuis <g2p.code+btrfs@gmail.com>
Signed-off-by: Josef Bacik <jbacik@fusionio.com>

lock_extent/unlock_extent expect an exclusive end.
Tested-by: David Sterba <dsterba@suse.cz>
Signed-off-by: Liu Bo <bo.li.liu@oracle.com>
Signed-off-by: Josef Bacik <jbacik@fusionio.com>

Quota tree has been missing from lockdep annotations, though no warning
has been seen in the wild.

There's currently one entry that does not belong there,
BTRFS_ORPHAN_OBJECTID.  No such tree exists, it's probably a copy &
paste mistake, the id is defined among tree ids.
Signed-off-by: David Sterba <dsterba@suse.cz>
Signed-off-by: Josef Bacik <jbacik@fusionio.com>

We've added new checks to make sure the super block crc is correct
during mount.  A fresh filesystem from an older mkfs won't have the
crc set.  This adds a warning when it finds a newly created filesystem
but doesn't fail the mount.
Signed-off-by: Chris Mason <chris.mason@fusionio.com>

The superblock checksum is not verified upon mount. <awkward silence>

Add that check and also reorder existing checks to a more logical
order.

Current mkfs.btrfs does not calculate the correct checksum of
super_block and thus a freshly created filesytem will fail to mount when
this patch is applied.

First transaction commit calculates correct superblock checksum and
saves it to disk.

Reproducer:
$ mfks.btrfs /dev/sda
$ mount /dev/sda /mnt
$ btrfs scrub start /mnt
$ sleep 5
$ btrfs scrub status /mnt
... super:2 ...
Signed-off-by: David Sterba <dsterba@suse.cz>
Signed-off-by: Josef Bacik <jbacik@fusionio.com>
Signed-off-by: Chris Mason <chris.mason@fusionio.com>

The variable was named 'data' in btrfs_reserve_extent and that's the
only function that actually uses it to let btrfs_get_alloc_profile know
what profile we want. Then it's passed down as u64 flags.
Signed-off-by: David Sterba <dsterba@suse.cz>
Signed-off-by: Josef Bacik <jbacik@fusionio.com>

Signed-off-by: David Sterba <dsterba@suse.cz>
Signed-off-by: Josef Bacik <jbacik@fusionio.com>

1) Right now scrub_stripe() is looping in some unnecessary cases:
* when the found extent item's objectid has been out of the dev extent's range
  but we haven't finish scanning all the range within the dev extent
* when all the items has been processed but we haven't finish scanning all the
  range within the dev extent

In both cases, we can just finish the loop to save costs.

2) Besides, when the found extent item's length is larger than the stripe
len(64k), we don't have to release the path and search again as it'll get at the
same key used in the last loop, we can instead increase the logical cursor in
place till all space of the extent is scanned.

3) And we use 0 as the key's offset to search btree, then get to previous item
to find a smaller item, and again have to move to the next one to get the right
item.  Setting offset=-1 and previous_item() is the correct way.

4) As we won't find any checksum at offset unless this 'offset' is in a data
extent, we can just find checksum when we're really going to scrub an extent.
Signed-off-by: Liu Bo <bo.li.liu@oracle.com>
Signed-off-by: Josef Bacik <jbacik@fusionio.com>

There's a theoretical possibility of reading stale (or even more
theoretically, freed) data from DEV_INFO ioctl when the device would
disappear between an early mutex unlock and data being copied from the
device structure.
Signed-off-by: David Sterba <dsterba@suse.cz>
Signed-off-by: Josef Bacik <jbacik@fusionio.com>

It's unused since 0b32f4bb.
Signed-off-by: David Sterba <dsterba@suse.cz>
Signed-off-by: Josef Bacik <jbacik@fusionio.com>

Signed-off-by: David Sterba <dsterba@suse.cz>
Reviewed-by: Zach Brown <zab@redhat.com>
Signed-off-by: Josef Bacik <jbacik@fusionio.com>

Big patch, but all it does is add statics to functions which
are in fact static, then remove the associated dead-code fallout.

removed functions:

btrfs_iref_to_path()
__btrfs_lookup_delayed_deletion_item()
__btrfs_search_delayed_insertion_item()
__btrfs_search_delayed_deletion_item()
find_eb_for_page()
btrfs_find_block_group()
range_straddles_pages()
extent_range_uptodate()
btrfs_file_extent_length()
btrfs_scrub_cancel_devid()
btrfs_start_transaction_lflush()

btrfs_print_tree() is left because it is used for debugging.
btrfs_start_transaction_lflush() and btrfs_reada_detach() are
left for symmetry.

ulist.c functions are left, another patch will take care of those.
Signed-off-by: Eric Sandeen <sandeen@redhat.com>
Signed-off-by: Josef Bacik <jbacik@fusionio.com>

If you try to mount -o loop a restored file system it will panic if the file
ends up being smaller than the original disk.  This is because we go to try and
get a block for a super that may be past the EOF which makes __getblk return
NULL for a buffer head when we aren't expecting it to.  Fix this by dealing with
this case and just jacking up the errors count.  With this patch we no longer
panic when mounting a restored file system loopback.  Thanks,
Signed-off-by: Josef Bacik <jbacik@fusionio.com>

There were a whole bunch and I was doing it for other things.  I haven't tested
these error paths but at the very least this is better than panicing.  I've only
left 2 BUG_ON()'s since they are logic errors and I want to replace them with a
ASSERT framework that we can compile out for production users.  Thanks,
Signed-off-by: Josef Bacik <jbacik@fusionio.com>

So everybody who got hit by my fsync bug will still continue to hit this
BUG_ON() in the free space cache, which is pretty heavy handed.  So I took a
file system that had this bug and fixed up all the BUG_ON()'s and leaks that
popped up when I tried to mount a broken file system like this.  With this patch
we just fail to mount instead of panicing.  Thanks,
Signed-off-by: Josef Bacik <jbacik@fusionio.com>

When qgroup tracking is enabled, we do an automatic cycle of the new rescan
mechanism.
Signed-off-by: Jan Schmidt <list.btrfs@jan-o-sch.net>
Signed-off-by: Josef Bacik <jbacik@fusionio.com>

If qgroup tracking is out of sync, a rescan operation can be started. It
iterates the complete extent tree and recalculates all qgroup tracking data.
This is an expensive operation and should not be used unless required.

A filesystem under rescan can still be umounted. The rescan continues on the
next mount.  Status information is provided with a separate ioctl while a
rescan operation is in progress.
Signed-off-by: Jan Schmidt <list.btrfs@jan-o-sch.net>
Signed-off-by: Josef Bacik <jbacik@fusionio.com>

The function is separated into a preparation part and the three accounting
steps mentioned in the qgroups documentation. The goal is to make steps two
and three usable by the rescan functionality. A side effect is that the
function is restructured into readable subunits.
Signed-off-by: Jan Schmidt <list.btrfs@jan-o-sch.net>
Signed-off-by: Josef Bacik <jbacik@fusionio.com>

When running the 208th of xfstests, the fs returned the enospc
error when there was lots of free space in the disk.

By bisect debug, we found it was introduced by commit 96f1bb57.
This commit makes the space check for the global reservation in
can_overcommit() be inconsistent with should_alloc_chunk().
can_overcommit() requires that the free space is 2 times the size
of the global reservation, or we can't do overcommit. And instead,
we need reclaim some reserved space, and if we still don't have
enough free space, we need allocate a new chunk. But unfortunately,
should_alloc_chunk() just requires that the free space is 1 time
the size of the global reservation, that is we would not try to
allocate a new chunk if the free space size is in the middle of
these two requires, and just return the enospc error. Fix it.

Cc: Jim Schutt <jaschut@sandia.gov>
Cc: Josef Bacik <jbacik@fusionio.com>
Signed-off-by: Miao Xie <miaox@cn.fujitsu.com>
Signed-off-by: Josef Bacik <jbacik@fusionio.com>

Sequence numbers for delayed refs have been introduced in the first version
of the qgroup patch set. To solve the problem of find_all_roots on a busy
file system, the tree mod log was introduced. The sequence numbers for that
were simply shared between those two users.

However, at one point in qgroup's quota accounting, there's a statement
accessing the previous sequence number, that's still just doing (seq - 1)
just as it would have to in the very first version.

To satisfy that requirement, this patch makes the sequence number counter 64
bit and splits it into a major part (used for qgroup sequence number
counting) and a minor part (incremented for each tree modification in the
log). This enables us to go exactly one major step backwards, as required
for qgroups, while still incrementing the sequence counter for tree mod log
insertions to keep track of their order. Keeping them in a single variable
means there's no need to change all the code dealing with comparisons of two
sequence numbers.

The sequence number is reset to 0 on commit (not new in this patch), which
ensures we won't overflow the two 32 bit counters.

Without this fix, the qgroup tracking can occasionally go wrong and WARN_ONs
from the tree mod log code may happen.
Signed-off-by: Jan Schmidt <list.btrfs@jan-o-sch.net>
Signed-off-by: Josef Bacik <jbacik@fusionio.com>

Clean up the leak debugging in extent_io.c by moving
the debug code into functions.  This also removes the
list_heads used for debugging from the extent_buffer
and extent_state structures when debug is not enabled.

Since we need a global debug config to do that last
part, implement CONFIG_BTRFS_DEBUG to accommodate.

Thanks to Dave Sterba for the Kconfig bit.
Signed-off-by: Eric Sandeen <sandeen@redhat.com>
Reviewed-by: David Sterba <dsterba@suse.cz>
Signed-off-by: Josef Bacik <jbacik@fusionio.com>

Replace some BUG_ONs with proper handling and take allocated space back to
free space cache for later use.

We don't have to worry about extent maps since they'd be freed in releasepage
path.
Signed-off-by: Liu Bo <bo.li.liu@oracle.com>
Signed-off-by: Josef Bacik <jbacik@fusionio.com>

It is a rare exception that a new tree is created, like the qgroups
tree. So far these new trees have an all-zero UUID in their root
items. All trees that mkfs.btrfs has created get an UUID during the
first mount when btrfs_read_root_item() rewrites the root_item to
the v2 structure style. These UUID are never used so far, but
anyway, since it is better to have it uniform for all trees, this
commit adds some lines that generate and write an UUID for newly
created trees.
Signed-off-by: Stefan Behrens <sbehrens@giantdisaster.de>
Signed-off-by: Josef Bacik <jbacik@fusionio.com>