Skip to content

L
linux
Switch branch/tag
  1. 20 Nov, 2009 1 commit
    • Jay Fenlason's avatar
      firewire: ohci: pass correct iso xmit timestamps to core · 31769cef
      Jay Fenlason authored 
      Here is the final set of patches I used to get ffado to work with the
new firewire stack.  With these patches, I was able to start ardour
and record from and playback to my PreSonus Inspire1394 from a
(mostly) Fedora 12 system.
Signed-off-by: default avatarJay Fenlason <fenlason@redhat.com>

Until now, firewire-ohci exposed only the transmit cycle of the last
transmitted packet at each isochronous transmit complete event.  This
made it impossible for FFADO (FireWire audio drivers in userspace) to
synchronize audio-out streams.  The fix is to store the timestamp of
each packet in the iso xmit event.  As a bonus, the transfer status is
stored too.
Signed-off-by: default avatarStefan Richter <stefanr@s5r6.in-berlin.de>
      31769cef
  3. 18 Nov, 2009 1 commit
    • Jay Fenlason's avatar
      firewire: ohci: Make cycleMatch ISO transmission work · 5ed1f321
      Jay Fenlason authored 
      Calling the START_ISO ioctl with a nonnegative cycle paramater has
never worked.  Last night I got around to figuring out why.  Most of
this patch is a big comment explaining why we enable an interrupt
source then don't actually do anything when we get one.  As the
comment says, we should do more, but we don't have a way to tell
userspace what happened. . .
Signed-off-by: default avatarJay Fenlason <fenlason@redhat.com>
Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de> (edited comment)
      5ed1f321
  5. 14 Oct, 2009 1 commit
    • Stefan Richter's avatar
      firewire: sbp2: provide fallback if mgt_ORB_timeout is missing · eaf76e0d
      Stefan Richter authored 
      The Unit_Characteristics entry of an SBP-2 unit directory is not
mandatory as far as I can tell.  If it is missing, we would probably
fail to log in into the target because firewire-sbp2 would not wait for
status after it sent the login request.

The fix moves the cleanup of tgt->mgt_orb_timeout into a place where it
is executed exactly once before login, rather than 0..n times depending
on the target's config ROM.  With targets with one or more
Unit_Characteristics entries, the result is the same as before.
Signed-off-by: default avatarStefan Richter <stefanr@s5r6.in-berlin.de>
      eaf76e0d
  7. 07 Oct, 2009 1 commit
  9. 03 Oct, 2009 1 commit
  11. 12 Sep, 2009 8 commits
  13. 09 Sep, 2009 3 commits
    • Linus Torvalds's avatar
      Linux 2.6.31 · 74fca6a4
      Linus Torvalds authored
      74fca6a4
    • Ed Cashin's avatar
      aoe: allocate unused request_queue for sysfs · 7135a71b
      Ed Cashin authored 
      Andy Whitcroft reported an oops in aoe triggered by use of an
incorrectly initialised request_queue object:

  [ 2645.959090] kobject '<NULL>' (ffff880059ca22c0): tried to add
		an uninitialized object, something is seriously wrong.
  [ 2645.959104] Pid: 6, comm: events/0 Not tainted 2.6.31-5-generic #24-Ubuntu
  [ 2645.959107] Call Trace:
  [ 2645.959139] [<ffffffff8126ca2f>] kobject_add+0x5f/0x70
  [ 2645.959151] [<ffffffff8125b4ab>] blk_register_queue+0x8b/0xf0
  [ 2645.959155] [<ffffffff8126043f>] add_disk+0x8f/0x160
  [ 2645.959161] [<ffffffffa01673c4>] aoeblk_gdalloc+0x164/0x1c0 [aoe]

The request queue of an aoe device is not used but can be allocated in
code that does not sleep.

Bruno bisected this regression down to

  cd43e26f

  block: Expose stacked device queues in sysfs

"This seems to generate /sys/block/$device/queue and its contents for
 everyone who is using queues, not just for those queues that have a
 non-NULL queue->request_fn."

Addresses http://bugs.launchpad.net/bugs/410198
Addresses http://bugzilla.kernel.org/show_bug.cgi?id=13942

Note that embedding a queue inside another object has always been
an illegal construct, since the queues are reference counted and
must persist until the last reference is dropped. So aoe was
always buggy in this respect (Jens).
Signed-off-by: default avatarEd Cashin <ecashin@coraid.com>
Cc: Andy Whitcroft <apw@canonical.com>
Cc: "Rafael J. Wysocki" <rjw@sisk.pl>
Cc: Bruno Premont <bonbons@linux-vserver.org>
Cc: Martin K. Petersen <martin.petersen@oracle.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: default avatarJens Axboe <jens.axboe@oracle.com>
      7135a71b
    • Linus Torvalds's avatar
      i915: disable interrupts before tearing down GEM state · e6890f6f
      Linus Torvalds authored 
      Reinette Chatre reports a frozen system (with blinking keyboard LEDs)
when switching from graphics mode to the text console, or when
suspending (which does the same thing). With netconsole, the oops
turned out to be

	BUG: unable to handle kernel NULL pointer dereference at 0000000000000084
	IP: [<ffffffffa03ecaab>] i915_driver_irq_handler+0x26b/0xd20 [i915]

and it's due to the i915_gem.c code doing drm_irq_uninstall() after
having done i915_gem_idle(). And the i915_gem_idle() path will do

  i915_gem_idle() ->
    i915_gem_cleanup_ringbuffer() ->
      i915_gem_cleanup_hws() ->
        dev_priv->hw_status_page = NULL;

but if an i915 interrupt comes in after this stage, it may want to
access that hw_status_page, and gets the above NULL pointer dereference.

And since the NULL pointer dereference happens from within an interrupt,
and with the screen still in graphics mode, the common end result is
simply a silently hung machine.

Fix it by simply uninstalling the irq handler before idling rather than
after. Fixes

    http://bugzilla.kernel.org/show_bug.cgi?id=13819Reported-and-tested-by: default avatarReinette Chatre <reinette.chatre@intel.com>
Acked-by: default avatarJesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: default avatarLinus Torvalds <torvalds@linux-foundation.org>
      e6890f6f
  15. 08 Sep, 2009 1 commit
  17. 07 Sep, 2009 7 commits
  19. 06 Sep, 2009 1 commit
    • David S. Miller's avatar
      gianfar: Fix build. · d9d8e041
      David S. Miller authored 
      Reported by Michael Guntsche <mike@it-loops.com>

--------------------
Commit
38bddf04 gianfar: gfar_remove needs to call unregister_netdev()

breaks the build of the gianfar driver because "dev" is undefined in
this function. To quickly test rc9 I changed this to priv->ndev but I do
not know if this is the correct one.
--------------------
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      d9d8e041
  21. 05 Sep, 2009 15 commits
GitLab Nexedi Edition | About GitLab | About Nexedi | 沪ICP备2021021310号-2 | 沪ICP备2021021310号-7