- 15 Jan, 2014 40 commits
-
-
Lan Tianyu authored
commit a90b4038 upstream. The AML method _BIX of NEC LZ750/LS returns a broken package which skips the first member "Revision" (ACPI 5.0, Table 10-234). Add a quirk for this machine to skip member "Revision" during parsing the package returned by _BIX. Reference: https://bugzilla.kernel.org/show_bug.cgi?id=67351Reported-and-tested-by:
Francisco Castro <fcr@adinet.com.uy> Signed-off-by:
Lan Tianyu <tianyu.lan@intel.com> Reviewed-by:
Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by:
Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Jiang Liu authored
commit df45c712 upstream. In function ppi_callback(), memory allocated by acpi_get_name() will get leaked when current device isn't the desired TPM device, so fix the memory leak. Signed-off-by:
Jiang Liu <jiang.liu@linux.intel.com> Signed-off-by:
-
Thomas Gleixner authored
commit 73beb63d upstream. This fixes a kernel panic when resuming from suspend to RAM. Without this fix an interrupt hits after the delayed work is canceled and thus requeues it. So we end up freeing an armed timer. Signed-off-by:
Thomas Gleixner <tglx@linutronix.de> Signed-off-by:
Samuel Ortiz <sameo@linux.intel.com> Signed-off-by:
-
Milo Kim authored
commit e70988d1 upstream. It can be a problem when a pattern is loaded via the firmware interface. LP55xx common driver has already locked the mutex in 'lp55xx_firmware_loaded()'. So it should be deleted. On the other hand, locks are required in store_engine_load() on updating program memory. Reported-by:
Pali Rohár <pali.rohar@gmail.com> Reported-by:
Pavel Machek <pavel@ucw.cz> Signed-off-by:
Milo Kim <milo.kim@ti.com> Signed-off-by:
Bryan Wu <cooloney@gmail.com> Signed-off-by:
-
Andrew Bresticker authored
commit 97c3557c upstream. The gate clocks for the MFC sysmmus appear to be flipped, i.e. GATE_IP_MFC[2] gates sysmmu_mfcl and GATE_IP_MFC[1] gates sysmmu_mfcr. Fix this so that the MFC will start up. Signed-off-by:
Andrew Bresticker <abrestic@chromium.org> Signed-off-by:
Sachin Kamat <sachin.kamat@linaro.org> Acked-by:
Mike Turquette <mturquette@linaro.org> Signed-off-by:
Tomasz Figa <t.figa@samsung.com> Signed-off-by:
-
Abhilash Kesavan authored
commit 2feed5ae upstream. The sysreg (system register) generates control signals for various blocks like disp1blk, i2c, mipi, usb etc. However, it gets disabled as an unused clock at boot-up. This can lead to failures in operation of above blocks, because they can not be configured properly if this clock is disabled. Signed-off-by:
Abhilash Kesavan <a.kesavan@samsung.com> Acked-by:
-
Abhilash Kesavan authored
commit 8fb9aeb7 upstream. Adds gate clock for MDMA0 on Exynos5250 SoC. This is needed to ensure that the clock is enabled when MDMA0 is used on systems on which firmware gates the clockby default. Signed-off-by:
-
Abhilash Kesavan authored
commit 3bf34666 upstream. The CLK_GATE_IP_ACP register offset is incorrectly listed making definition of g2d clock incorrect, which may lead to system failures when trying to use G2D on systems on which firmware gates this clock by default. Fix this and the register ordering as well. Signed-off-by:
-
Seung-Woo Kim authored
commit 5fdd1b56 upstream. The SRC_MFC register offset was incorrect, which could cause have caused wrong calculation of rate of sclk_mfc clock, that could in turn lead to incorrect operation of MFC. This patch corrects it. Signed-off-by:
Seung-Woo Kim <sw0312.kim@samsung.com> Acked-by:
-
James Hogan authored
commit 778037e1 upstream. Commit 6d9252bd (clk: Add support for power of two type dividers) merged in v3.6 added the _get_val function to convert a divisor value to a register field value depending on the flags. However it used the type u8 for the div field, causing divisors larger than 255 to be masked and the resultant clock rate to be too high. E.g. in my case an 11bit divider was supposed to divide 24.576 MHz down to 32.768KHz. The divisor was correctly calculated as 750 (0x2ee). This was masked to 238 (0xee) resulting in a frequency of 103.26KHz. Signed-off-by:
James Hogan <james.hogan@imgtec.com> Cc: Rajendra Nayak <rnayak@ti.com> Cc: linux-arm-kernel@lists.infradead.org Signed-off-by:
-
Simon Guinot authored
commit e098f5cb upstream. This patch adds support for the PCI ID provided by the Marvell 88SE9170 SATA controller. Signed-off-by:
Simon Guinot <sguinot@lacie.com> Signed-off-by:
Tejun Heo <tj@kernel.org> Signed-off-by:
-
John David Anglin authored
commit f8dae006 upstream. Helge Deller noted a few weeks ago problems with the AIO support on parisc. This change is the result of numerous iterations on how best to deal with this problem. The solution adopted here is to provide full cache coherency in a uniform manner on all parisc systems. This involves calling flush_dcache_page() on kmap operations and flush_kernel_dcache_page() on kunmap operations. As a result, the copy_user_page() and clear_user_page() functions can be removed and the overall code is simpler. The change ensures that both userspace and kernel aliases to a mapped page are invalidated and flushed. This is necessary for the correct operation of PA8800 and PA8900 based systems which do not support inequivalent aliases. With this change, I have observed no cache related issues on c8000 and rp3440. It is now possible for example to do kernel builds with "-j64" on four way systems. On systems using XFS file systems, the patch recently posted by Mikulas Patocka to "fix crash using XFS on loopback" is needed to avoid a hang caused by an uninitialized lock passed to flush_dcache_page() in the page struct. Signed-off-by:
John David Anglin <dave.anglin@bell.net> Signed-off-by:
Helge Deller <deller@gmx.de> Signed-off-by:
-
Ilia Mirkin authored
commit 6d60792e upstream. This fixes a hang in VBIOS scripts of the form "condition; jump". The jump used to always be executed, while now it will only be executed if the condition is true. See https://bugs.freedesktop.org/show_bug.cgi?id=72943Reported-by:
Darcy Brás da Silva <dardevelin@cidadecool.com> Signed-off-by:
Ilia Mirkin <imirkin@alum.mit.edu> Signed-off-by:
-
Laurent Pinchart authored
commit b6328a6b upstream. Commit 4dcfa600 ("ARM: DMA-API: better handing of DMA masks for coherent allocations") added an additional check to the coherent DMA mask that results in an error when the mask is larger than what dma_addr_t can address. Set the LCDC coherent DMA mask to DMA_BIT_MASK(32) instead of ~0 to fix the problem. Signed-off-by:
Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Signed-off-by:
Simon Horman <horms+renesas@verge.net.au> Signed-off-by:
-
Laurent Pinchart authored
commit dcd740b6 upstream. Commit 4dcfa600 ("ARM: DMA-API: better handing of DMA masks for coherent allocations") added an additional check to the coherent DMA mask that results in an error when the mask is larger than what dma_addr_t can address. Set the LCDC coherent DMA mask to DMA_BIT_MASK(32) instead of ~0 to fix the problem. Signed-off-by:
-
Laurent Pinchart authored
commit 4f387323 upstream. Commit 4dcfa600 ("ARM: DMA-API: better handing of DMA masks for coherent allocations") added an additional check to the coherent DMA mask that results in an error when the mask is larger than what dma_addr_t can address. Set the LCDC coherent DMA mask to DMA_BIT_MASK(32) instead of ~0 to fix the problem. Signed-off-by:
-
Abhilash Kesavan authored
commit 87775394 upstream. Due to incorrect clock specified in MDMA0 node, using MDMA0 controller could cause system failures, due to wrong clock being controlled. This patch fixes this by specifying correct clock. Signed-off-by:
-
Steven Capper authored
commit 2a7cfcbc upstream. When given a compound high page, __flush_dcache_page will only flush the first page of the compound page repeatedly rather than the entire set of constituent pages. This error was introduced by: 0b19f933 ARM: mm: Add support for flushing HugeTLB pages. This patch corrects the logic such that all constituent pages are now flushed. Signed-off-by:
Steve Capper <steve.capper@linaro.org> Acked-by:
Will Deacon <will.deacon@arm.com> Signed-off-by:
Russell King <rmk+kernel@arm.linux.org.uk> Signed-off-by:
-
Russell King authored
commit 29c350bf upstream. The array was missing the final entry for the undefined instruction exception handler; this commit adds it. Signed-off-by:
-
Russell King authored
commit 4ff859fe upstream. The clockevents code was being told that the footbridge clock event device ticks at 16x the rate which it actually does. This leads to timekeeping problems since it allows the clocksource to wrap before the kernel notices. Fix this by using the correct clock. Fixes: 4e8d7637 ("ARM: footbridge: convert to clockevents/clocksource") Signed-off-by:
-
Robert Stonehouse authored
[ Upstream commit 6b294b8e ] There is an as-yet unexplained bug that sometimes prevents (or delays) the driver seeing the completion event for a completed MCDI request on the SFC9120. The requested configuration change will have happened but the driver assumes it to have failed, and this can result in further failures. We can mitigate this by polling for completion after unsuccessfully waiting for an event. Fixes: 8127d661 ('sfc: Add support for Solarflare SFC9100 family') Signed-off-by:
Ben Hutchings <bhutchings@solarflare.com> Signed-off-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
-
Robert Stonehouse authored
[ Upstream commit 5731d7b3 ] Signed-off-by:
-
Andrew Rybchenko authored
[ Upstream commit 2ec03014 ] rx_prefix_size is 4-bytes aligned on Falcon/Siena (16 bytes), but it is equal to 14 on EF10. So, it should be taken into account if arch requires IP header to be 4-bytes aligned (via NET_IP_ALIGN). Fixes: 8127d661 ('sfc: Add support for Solarflare SFC9100 family') Signed-off-by:
-
Ben Hutchings authored
[ Upstream commit cd6fe65e ] There is a single MCDI PTP operation for setting the frequency adjustment and applying a time offset to the hardware clock. When applying a time offset we should not change the frequency adjustment. These two operations can now be requested separately but this requires a flash firmware update. Keep using the single operation, but remember and repeat the previous frequency adjustment. Fixes: 7c236c43 ('sfc: Add support for IEEE-1588 PTP') Signed-off-by:
-
Alexandre Rames authored
[ Upstream commit 2ea4dc28 ] This disables PTP when we bring the interface down to avoid getting unmatched RX timestamp events, and tries to re-enable it when bringing the interface up. [bwh: Make efx_ptp_stop() safe on Falcon. Introduce efx_ptp_{start,stop}_datapath() functions; we'll expand them later.] Fixes: 7c236c43 ('sfc: Add support for IEEE-1588 PTP') Signed-off-by:
-
Ben Hutchings authored
[ Upstream commit 35f9a7a3 ] In case of a flood of PTP packets, the timestamp peripheral and MC firmware on the SFN[56]322F boards may not be able to provide timestamp events for all packets. Don't complain too much about this. Fixes: 7c236c43 ('sfc: Add support for IEEE-1588 PTP') Signed-off-by:
-
Laurence Evans authored
[ Upstream commit f3211600 ] Limit syslog flood if a PTP packet storm occurs. Fixes: 7c236c43 ('sfc: Add support for IEEE-1588 PTP') Signed-off-by:
-
Ben Hutchings authored
[ Upstream commit e5a498e9 ] efx_ptp_is_ptp_tx() must be robust against skbs from raw sockets that have invalid IPv4 and UDP headers. Add checks that: - the transport header has been found - there is enough space between network and transport header offset for an IPv4 header - there is enough space after the transport header offset for a UDP header Fixes: 7c236c43 ('sfc: Add support for IEEE-1588 PTP') Signed-off-by:
-
Curt Brune authored
[ Upstream commit fe0d692b ] br_multicast_set_hash_max() is called from process context in net/bridge/br_sysfs_br.c by the sysfs store_hash_max() function. br_multicast_set_hash_max() calls spin_lock(&br->multicast_lock), which can deadlock the CPU if a softirq that also tries to take the same lock interrupts br_multicast_set_hash_max() while the lock is held . This can happen quite easily when any of the bridge multicast timers expire, which try to take the same lock. The fix here is to use spin_lock_bh(), preventing other softirqs from executing on this CPU. Steps to reproduce: 1. Create a bridge with several interfaces (I used 4). 2. Set the "multicast query interval" to a low number, like 2. 3. Enable the bridge as a multicast querier. 4. Repeatedly set the bridge hash_max parameter via sysfs. # brctl addbr br0 # brctl addif br0 eth1 eth2 eth3 eth4 # brctl setmcqi br0 2 # brctl setmcquerier br0 1 # while true ; do echo 4096 > /sys/class/net/br0/bridge/hash_max; done Signed-off-by:
Curt Brune <curt@cumulusnetworks.com> Signed-off-by:
Scott Feldman <sfeldma@cumulusnetworks.com> Signed-off-by:
-
David S. Miller authored
[ Upstream commit aca5f58f ] The VLAN tag handling code in netpoll_send_skb_on_dev() has two problems. 1) It exits without unlocking the TXQ. 2) It then tries to queue a NULL skb to npinfo->txq. Reported-by:
Ahmed Tamrawi <atamrawi@iastate.edu> Signed-off-by:
-
Daniel Borkmann authored
[ Upstream commit 4d231b76 ] While commit 30a584d9 fixes datagram interface in LLC, a use after free bug has been introduced for SOCK_STREAM sockets that do not make use of MSG_PEEK. The flow is as follow ... if (!(flags & MSG_PEEK)) { ... sk_eat_skb(sk, skb, false); ... } ... if (used + offset < skb->len) continue; ... where sk_eat_skb() calls __kfree_skb(). Therefore, cache original length and work on skb_len to check partial reads. Fixes: 30a584d9 ("[LLX]: SOCK_DGRAM interface fixes") Signed-off-by:
Daniel Borkmann <dborkman@redhat.com> Cc: Stephen Hemminger <stephen@networkplumber.org> Cc: Arnaldo Carvalho de Melo <acme@ghostprotocols.net> Signed-off-by:
-
Jason Wang authored
[ Upstream commit 6cd4ce00 ] During restoring, try_fill_recv() was called with neither napi lock nor napi disabled. This can lead two try_fill_recv() was called in the same time. Fix this by refilling before trying to enable napi. Fixes 0741bcb5 (virtio: net: Add freeze, restore handlers to support S4). Cc: Amit Shah <amit.shah@redhat.com> Cc: Rusty Russell <rusty@rustcorp.com.au> Cc: Michael S. Tsirkin <mst@redhat.com> Cc: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by:
Jason Wang <jasowang@redhat.com> Signed-off-by:
-
Wei-Chun Chao authored
[ Upstream commit 7a7ffbab ] VM to VM GSO traffic is broken if it goes through VXLAN or GRE tunnel and the physical NIC on the host supports hardware VXLAN/GRE GSO offload (e.g. bnx2x and next-gen mlx4). Two issues - (VXLAN) VM traffic has SKB_GSO_DODGY and SKB_GSO_UDP_TUNNEL with SKB_GSO_TCP/UDP set depending on the inner protocol. GSO header integrity check fails in udp4_ufo_fragment if inner protocol is TCP. Also gso_segs is calculated incorrectly using skb->len that includes tunnel header. Fix: robust check should only be applied to the inner packet. (VXLAN & GRE) Once GSO header integrity check passes, NULL segs is returned and the original skb is sent to hardware. However the tunnel header is already pulled. Fix: tunnel header needs to be restored so that hardware can perform GSO properly on the original packet. Signed-off-by:
Wei-Chun Chao <weichunc@plumgrid.com> Signed-off-by:
-
Michael S. Tsirkin authored
We leak an skb when there are too many frags, we also stop processing the packet in the middle, the result is almost sure to be loss of networking. Reported-by:
Michael Dalton <mwdalton@google.com> Acked-by:
Michael S. Tsirkin <mst@redhat.com> Signed-off-by:
-
Michael S. Tsirkin authored
receive mergeable now handles errors internally. Do same for big and small packet paths, otherwise the logic is too hard to follow. Cc: Jason Wang <jasowang@redhat.com> Cc: David S. Miller <davem@davemloft.net> Acked-by:
-
Michael S. Tsirkin authored
Eric Dumazet noticed that if we encounter an error when processing a mergeable buffer, we don't dequeue all of the buffers from this packet, the result is almost sure to be loss of networking. Fix this issue. Cc: Rusty Russell <rusty@rustcorp.com.au> Cc: Michael Dalton <mwdalton@google.com> Acked-by:
-
David S. Miller authored
[ Upstream commit 2205369a ] When the vlan code detects that the real device can do TX VLAN offloads in hardware, it tries to arrange for the real device's header_ops to be invoked directly. But it does so illegally, by simply hooking the real device's header_ops up to the VLAN device. This doesn't work because we will end up invoking a set of header_ops routines which expect a device type which matches the real device, but will see a VLAN device instead. Fix this by providing a pass-thru set of header_ops which will arrange to pass the proper real device instead. To facilitate this add a dev_rebuild_header(). There are implementations which provide a ->cache and ->create but not a ->rebuild (f.e. PLIP). So we need a helper function just like dev_hard_header() to avoid crashes. Use this helper in the one existing place where the header_ops->rebuild was being invoked, the neighbour code. With lots of help from Florian Westphal. Signed-off-by:
-
Florian Westphal authored
[ Upstream commit f81152e3 ] recvmsg handler in net/rose/af_rose.c performs size-check ->msg_namelen. After commit f3d33426 (net: rework recvmsg handler msg_name and msg_namelen logic), we now always take the else branch due to namelen being initialized to 0. Digging in netdev-vger-cvs git repo shows that msg_namelen was initialized with a fixed-size since at least 1995, so the else branch was never taken. Compile tested only. Signed-off-by:
Florian Westphal <fw@strlen.de> Acked-by:
Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by:
-
Eric Dumazet authored
[ Upstream commit 37ec274e ] Signed-off-by:
Eric Dumazet <edumazet@google.com> skb_tx_timestamp(skb) should be called _before_ TX completion has a chance to trigger, otherwise it is too late and we access freed memory. Fixes: e4f2379d ("ethernet/arc/arc_emac - Add new driver") From: Eric Dumazet <edumazet@google.com> Cc: Alexey Brodkin <Alexey.Brodkin@synopsys.com> Cc: Richard Cochran <richardcochran@gmail.com> Signed-off-by:
-
Sasha Levin authored
[ Upstream commit c2349758 ] Binding might result in a NULL device, which is dereferenced causing this BUG: [ 1317.260548] BUG: unable to handle kernel NULL pointer dereference at 000000000000097 4 [ 1317.261847] IP: [<ffffffff84225f52>] rds_ib_laddr_check+0x82/0x110 [ 1317.263315] PGD 418bcb067 PUD 3ceb21067 PMD 0 [ 1317.263502] Oops: 0000 [#1] PREEMPT SMP DEBUG_PAGEALLOC [ 1317.264179] Dumping ftrace buffer: [ 1317.264774] (ftrace buffer empty) [ 1317.265220] Modules linked in: [ 1317.265824] CPU: 4 PID: 836 Comm: trinity-child46 Tainted: G W 3.13.0-rc4- next-20131218-sasha-00013-g2cebb9b-dirty #4159 [ 1317.267415] task: ffff8803ddf33000 ti: ffff8803cd31a000 task.ti: ffff8803cd31a000 [ 1317.268399] RIP: 0010:[<ffffffff84225f52>] [<ffffffff84225f52>] rds_ib_laddr_check+ 0x82/0x110 [ 1317.269670] RSP: 0000:ffff8803cd31bdf8 EFLAGS: 00010246 [ 1317.270230] RAX: 0000000000000000 RBX: ffff88020b0dd388 RCX: 0000000000000000 [ 1317.270230] RDX: ffffffff8439822e RSI: 00000000000c000a RDI: 0000000000000286 [ 1317.270230] RBP: ffff8803cd31be38 R08: 0000000000000000 R09: 0000000000000000 [ 1317.270230] R10: 0000000000000000 R11: 0000000000000001 R12: 0000000000000000 [ 1317.270230] R13: 0000000054086700 R14: 0000000000a25de0 R15: 0000000000000031 [ 1317.270230] FS: 00007ff40251d700(0000) GS:ffff88022e200000(0000) knlGS:000000000000 0000 [ 1317.270230] CS: 0010 DS: 0000 ES: 0000 CR0: 000000008005003b [ 1317.270230] CR2: 0000000000000974 CR3: 00000003cd478000 CR4: 00000000000006e0 [ 1317.270230] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 1317.270230] DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000090602 [ 1317.270230] Stack: [ 1317.270230] 0000000054086700 5408670000a25de0 5408670000000002 0000000000000000 [ 1317.270230] ffffffff84223542 00000000ea54c767 0000000000000000 ffffffff86d26160 [ 1317.270230] ffff8803cd31be68 ffffffff84223556 ffff8803cd31beb8 ffff8800c6765280 [ 1317.270230] Call Trace: [ 1317.270230] [<ffffffff84223542>] ? rds_trans_get_preferred+0x42/0xa0 [ 1317.270230] [<ffffffff84223556>] rds_trans_get_preferred+0x56/0xa0 [ 1317.270230] [<ffffffff8421c9c3>] rds_bind+0x73/0xf0 [ 1317.270230] [<ffffffff83e4ce62>] SYSC_bind+0x92/0xf0 [ 1317.270230] [<ffffffff812493f8>] ? context_tracking_user_exit+0xb8/0x1d0 [ 1317.270230] [<ffffffff8119313d>] ? trace_hardirqs_on+0xd/0x10 [ 1317.270230] [<ffffffff8107a852>] ? syscall_trace_enter+0x32/0x290 [ 1317.270230] [<ffffffff83e4cece>] SyS_bind+0xe/0x10 [ 1317.270230] [<ffffffff843a6ad0>] tracesys+0xdd/0xe2 [ 1317.270230] Code: 00 8b 45 cc 48 8d 75 d0 48 c7 45 d8 00 00 00 00 66 c7 45 d0 02 00 89 45 d4 48 89 df e8 78 49 76 ff 41 89 c4 85 c0 75 0c 48 8b 03 <80> b8 74 09 00 00 01 7 4 06 41 bc 9d ff ff ff f6 05 2a b6 c2 02 [ 1317.270230] RIP [<ffffffff84225f52>] rds_ib_laddr_check+0x82/0x110 [ 1317.270230] RSP <ffff8803cd31bdf8> [ 1317.270230] CR2: 0000000000000974 Signed-off-by:
Sasha Levin <sasha.levin@oracle.com> Signed-off-by:
-
