- 29 Dec, 2017 19 commits
-
-
Andy Shevchenko authored
The traditional pattern is to use DMI matching table and provide a corresponding driver_data in it. Convert driver to use DMI matching table. Signed-off-by:
Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by:
Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by:
Mauro Carvalho Chehab <mchehab@s-opensource.com>
-
Andy Shevchenko authored
There is no need to export function which is only used once in the same module where it's defined. Signed-off-by:
-
Andy Shevchenko authored
There is no need to keep a reference to PCI root bridge. Signed-off-by:
-
Andy Shevchenko authored
In a preparation of split PCI glue driver from core part, convert the driver to use more generic struct device_driver. Signed-off-by:
-
Andy Shevchenko authored
Since all drivers are solely requiring ACPI enumeration, there is no need to additionally check for legacy platform data or ACPI handle. Remove leftovers from the sensors and platform code. Signed-off-by:
-
Andy Shevchenko authored
Custom video format 'M101' is not supported in upstream and as a result user will get ugly warning: Unknown pixelformat 0x3130314d ------------[ cut here ]------------ WARNING: CPU: 3 PID: 1574 at drivers/media/v4l2-core/v4l2-ioctl.c:1291 v4l_enum_fmt+0xcf1/0x13a0 [videodev] Signed-off-by:
-
Andy Shevchenko authored
Driver fails to initialize due to insane settings in the control init array. Fix this by moving to sanity. Signed-off-by:
-
Andy Shevchenko authored
GPIO framework checks for NULL pointer when gpiod_set_value() is called. Signed-off-by:
-
Andy Shevchenko authored
In case devm_clk_get() call fails the previously requested GPIOs are left requested. Fix this by moving GPIO request code after devm_clk_get() call. Signed-off-by:
-
Aishwarya Pant authored
This is a clean-up patch which replaces DEVICE_ATTR() macro with file permission specific DEVICE_ATTR_RO() macro for compaction and readability. Done using coccinelle: @r@ identifier attr, show_fn; declarer name DEVICE_ATTR; @@ DEVICE_ATTR(attr, \(S_IRUGO\|0444\), show_fn, NULL); @script: python p@ attr_show; attr << r.attr; @@ // standardise the show fn name to {attr}_show coccinelle.attr_show = attr + "_show" @@ identifier r.attr, r.show_fn; declarer name DEVICE_ATTR_RO; @@ // change the attr declaration - DEVICE_ATTR(attr, \(S_IRUGO\|0444\), show_fn, NULL); + DEVICE_ATTR_RO(attr); @rr@ identifier r.show_fn, p.attr_show; @@ // rename the show function - show_fn + attr_show (...) { ... } @depends on rr@ identifier r.show_fn, p.attr_show; @@ // rename fn usages - show_fun + attr_show Signed-off-by:Aishwarya Pant <aishpant@gmail.com> Signed-off-by:
-
Sergiy Redko authored
Fixed sparse warning by making 'dtrace_dot' function static. Signed-off-by:
Sergiy Redko <sergredko@gmail.com> Signed-off-by:
-
Riccardo Schirone authored
Fix "suspect code indent for conditional statements" checkpatch issue Signed-off-by:
Riccardo Schirone <sirmy15@gmail.com> Signed-off-by:
-
Riccardo Schirone authored
Fix "Comparisons should place the constant on the right side of the test" checkpatch issue. Signed-off-by:
-
Riccardo Schirone authored
- Fix "Block comments use a trailing */ on a separate line" checkpatch issue - Fix "Block comments use * on subsequent lines" checkpatch issue Signed-off-by:
-
Riccardo Schirone authored
Fix "Missing a blank line after declarations" warning reported by checkpatch. Signed-off-by:
-
Sinan Kaya authored
pci_get_bus_and_slot() is restrictive such that it assumes domain=0 as where a PCI device is present. This restricts the device drivers to be reused for other domain numbers. Getting ready to remove pci_get_bus_and_slot() function. Since ISP always uses domain 0, hard-code it in the code when calling the replacement function pci_get_domain_bus_and_slot(). Signed-off-by:
Sinan Kaya <okaya@codeaurora.org> Signed-off-by:
-
Arnd Bergmann authored
timespec overflows in 2038 on 32-bit architectures, and the getnstimeofday() suffers from possible time jumps, so the timestamps here are better done using ktime_get(), which has neither of those problems. In case of ov2680, we don't seem to use the timestamp at all, so I just remove it. Signed-off-by:
Arnd Bergmann <arnd@arndb.de> Reviewed-by:
Alan Cox <alan@linux.intel.com> Signed-off-by:
-
Jeremy Sowden authored
Defined some const arrays as static since they don't need external linkage. Signed-off-by:
Jeremy Sowden <jeremy@azazel.net> Signed-off-by:
-
Jeremy Sowden authored
The "address" member of struct ia_css_host_data is a pointer-to-char, so define default as NULL. Signed-off-by:
-
- 28 Dec, 2017 14 commits
-
-
Fengguang Wu authored
drivers/media/common/videobuf/videobuf2-core.c:2525:34-35: Unneeded semicolon Remove unneeded semicolon. Generated by: scripts/coccinelle/misc/semicolon.cocci Fixes: 03fbdb2f ("media: move videobuf2 to drivers/media/common") Signed-off-by:
Fengguang Wu <fengguang.wu@intel.com>
-
Mauro Carvalho Chehab authored
Most of the I2C headers got moved a long time ago to include/media/i2c. Stop including them at the patch. Signed-off-by: -
Mauro Carvalho Chehab authored
Except for DVB, all media kAPI headers are at include/media. Move the headers to it. Signed-off-by: -
Mauro Carvalho Chehab authored
The "reserved" field was a way, used at V4L2 API, to add new data to existing structs without breaking userspace. However, there are now clever ways of doing that, without needing to add an uneeded overhead. So, get rid of them. Signed-off-by: -
Mauro Carvalho Chehab authored
5 new ioctls were added to the DVB demux API, in order to handle memory maped I/O. Add documentation for them. Signed-off-by: -
Mauro Carvalho Chehab authored
With the new dmx mmap interface, those two syscalls are now handled by the subsystem. Document them. This patch is based on the V4L2 text for those ioctls. Signed-off-by: -
Mauro Carvalho Chehab authored
Now that VB2 is used by both V4L2 and DVB core, move it to the common part of the subsystem. Signed-off-by: -
Mauro Carvalho Chehab authored
This API is still experimental. Make it optional, allowing to compile the code without it. Signed-off-by: -
Mauro Carvalho Chehab authored
Use trivial handling for the new DVB demux ioctls, as none of them passes a pointer inside their structures. Signed-off-by: -
Mauro Carvalho Chehab authored
This code is released under GPL. Add the corresponding SPDX headers. Signed-off-by: -
Mauro Carvalho Chehab authored
if the number of buffers requested by the user is too big, the VB core will truncate to a valid value. Use it, instead of what the user requested. Signed-off-by: -
Mauro Carvalho Chehab authored
It is not a good idea to let users to request a very high buffer size. So, add an upper limit. Signed-off-by: -
Mauro Carvalho Chehab authored
The streamoff logic is causing those warnings: WARNING: CPU: 3 PID: 3382 at drivers/media/v4l2-core/videobuf2-core.c:1652 __vb2_queue_cancel+0x177/0x250 [videobuf2_core] Modules linked in: bnep fuse xt_CHECKSUM iptable_mangle tun ebtable_filter ebtables ip6table_filter ip6_tables xt_physdev br_netfilter bluetooth bridge rfkill ecdh_generic stp llc nf_log_ipv4 nf_log_common xt_LOG xt_conntrack ipt_MASQUERADE nf_nat_masquerade_ipv4 iptable_nat nf_conntrack_ipv4 nf_defrag_ipv4 nf_nat_ipv4 nf_nat nf_conntrack libcrc32c sunrpc vfat fat snd_hda_codec_hdmi rc_dib0700_nec i915 rc_pinnacle_pctv_hd em28xx_rc a8293 ts2020 m88ds3103 i2c_mux em28xx_dvb dib8000 dvb_usb_dib0700 dib0070 dib7000m dib0090 dvb_usb dvb_core uvcvideo snd_usb_audio videobuf2_v4l2 dib3000mc videobuf2_vmalloc videobuf2_memops dibx000_common videobuf2_core rc_core snd_usbmidi_lib snd_rawmidi em28xx tveeprom v4l2_common videodev media intel_rapl x86_pkg_temp_thermal intel_powerclamp coretemp snd_hda_intel kvm_intel snd_hda_codec kvm snd_hwdep snd_hda_core snd_seq irqbypass crct10dif_pclmul crc32_pclmul i2c_algo_bit ghash_clmulni_intel snd_seq_device drm_kms_helper snd_pcm intel_cstate intel_uncore snd_timer tpm_tis drm mei_wdt iTCO_wdt iTCO_vendor_support tpm_tis_core snd intel_rapl_perf mei_me mei tpm i2c_i801 soundcore lpc_ich video binfmt_misc hid_logitech_hidpp hid_logitech_dj e1000e crc32c_intel ptp pps_core analog gameport joydev CPU: 3 PID: 3382 Comm: lt-dvbv5-zap Not tainted 4.14.0+ #3 Hardware name: /D53427RKE, BIOS RKPPT10H.86A.0048.2017.0506.1545 05/06/2017 task: ffff94b93bbe1e40 task.stack: ffffb7a98320c000 RIP: 0010:__vb2_queue_cancel+0x177/0x250 [videobuf2_core] RSP: 0018:ffffb7a98320fd40 EFLAGS: 00010202 RAX: 0000000000000001 RBX: ffff94b92ff72428 RCX: 0000000000000000 RDX: 0000000000000001 RSI: 0000000000000001 RDI: ffff94b92ff72428 RBP: ffffb7a98320fd68 R08: ffff94b92ff725d8 R09: ffffb7a98320fcc8 R10: ffff94b978003d98 R11: ffff94b92ff72428 R12: ffff94b92ff72428 R13: 0000000000000282 R14: ffff94b92059ae20 R15: dead000000000100 FS: 0000000000000000(0000) GS:ffff94b99e380000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000555953007d70 CR3: 000000012be09004 CR4: 00000000001606e0 Call Trace: vb2_core_streamoff+0x28/0x90 [videobuf2_core] dvb_vb2_stream_off+0xd1/0x150 [dvb_core] dvb_dvr_release+0x114/0x120 [dvb_core] __fput+0xdf/0x1e0 ____fput+0xe/0x10 task_work_run+0x94/0xc0 do_exit+0x2dc/0xba0 do_group_exit+0x47/0xb0 SyS_exit_group+0x14/0x20 entry_SYSCALL_64_fastpath+0x1a/0xa5 RIP: 0033:0x7f775e931ed8 RSP: 002b:00007fff07019d68 EFLAGS: 00000246 ORIG_RAX: 00000000000000e7 RAX: ffffffffffffffda RBX: 0000000001d02690 RCX: 00007f775e931ed8 RDX: 0000000000000001 RSI: 000000000000003c RDI: 0000000000000001 RBP: 00007fff0701a500 R08: 00000000000000e7 R09: ffffffffffffff70 R10: 00007f775e854dd8 R11: 0000000000000246 R12: 0000000000000000 R13: 00000000035fa000 R14: 000000000000000a R15: 000000000000000a Code: 00 00 04 74 1c 44 89 e8 49 83 c5 01 41 39 84 24 88 01 00 00 77 8a 5b 41 5c 41 5d 41 5e 41 5f 5d c3 48 89 df e8 bb fd ff ff eb da <0f> ff 41 8b b4 24 88 01 00 00 85 f6 74 34 bb 01 00 00 00 eb 10 There are actually two issues here: 1) list_del() should be called when changing the buffer state; 2) The logic with marks the buffers as done is at the wrong place. Signed-off-by: -
Satendra Singh Thakur authored
Adds a new uAPI for DVB to use streaming I/O which is implemented based on videobuf2, using those new ioctls: - DMX_REQBUFS: Request kernel to allocate buffers which count and size are dedicated by user. - DMX_QUERYBUF: Get the buffer information like a memory offset which will mmap() and be shared with user-space. - DMX_EXPBUF: Just for testing whether buffer-exporting success or not. - DMX_QBUF: Pass the buffer to kernel-space. - DMX_DQBUF: Get back the buffer which may contain TS data. Originally developed by: Junghak Sung <jh1009.sung@samsung.com>, as seen at: https://patchwork.linuxtv.org/patch/31613/ https://patchwork.kernel.org/patch/7334301/ The original patch was written before merging VB2-core functionalities upstream. When such series was added, several adjustments were made, fixing some issues with V4L2, causing the original patch to be non-trivially rebased. After rebased, a few bugs in the patch were fixed. The patch was also enhanced it and polling functionality got added. The main changes over the original patch are: dvb_vb2_fill_buffer(): - Set the size of the outgoing buffer after while loop using vb2_set_plane_payload; - Added NULL check for source buffer as per normal convention of demux driver, this is called twice, first time with valid buffer second time with NULL pointer, if its not handled, it will result in crash - Restricted spinlock for only list_* operations dvb_vb2_init(): - Restricted q->io_modes to only VB2_MMAP as its the only supported mode dvb_vb2_release(): - Replaced the && in if condiion with &, because otherwise it was always getting satisfied. dvb_vb2_stream_off(): - Added list_del code for enqueud buffers upon stream off dvb_vb2_poll(): - Added this new function in order to support polling dvb_demux_poll() and dvb_dvr_poll() - dvb_vb2_poll() is now called from these functions - Ported this patch and latest videobuf2 to lower kernel versions and tested auto scan. Co-developed-by:
Junghak Sung <jh1009.sung@samsung.com> [mchehab@s-opensource.com: checkpatch fixes] Signed-off-by:
Geunyoung Kim <nenggun.kim@samsung.com> Acked-by:
Seung-Woo Kim <sw0312.kim@samsung.com> Acked-by:
Inki Dae <inki.dae@samsung.com> Signed-off-by:
Satendra Singh Thakur <satendra.t@samsung.com> Signed-off-by:
-
- 22 Dec, 2017 1 commit
-
-
git://git.lwn.net/linuxMauro Carvalho Chehab authored
* 'docs-next' of git://git.lwn.net/linux: (888 commits) w1_netlink.h: add support for nested structs scripts: kernel-doc: apply filtering rules to warnings scripts: kernel-doc: improve nested logic to handle multiple identifiers scripts: kernel-doc: handle nested struct function arguments scripts: kernel-doc: print the declaration name on warnings scripts: kernel-doc: get rid of $nested parameter scripts: kernel-doc: parse next structs/unions scripts: kernel-doc: replace tabs by spaces scripts: kernel-doc: change default to ReST format scripts: kernel-doc: improve argument handling scripts: kernel-doc: get rid of unused output formats docs: get rid of kernel-doc-nano-HOWTO.txt docs: kernel-doc.rst: add documentation about man pages docs: kernel-doc.rst: improve typedef documentation docs: kernel-doc.rst: improve structs chapter docs: kernel-doc.rst: improve function documentation section docs: kernel-doc.rst: improve private members description docs: kernel-doc.rst: better describe kernel-doc arguments docs: fix process/submit-checklist.rst Sphinx warning docs: ftrace-uses.rst fix varios code-block directives ...
-
- 21 Dec, 2017 6 commits
-
-
Mauro Carvalho Chehab authored
Now that kernel-doc can hanle nested structs/unions, describe such fields at w1_netlink_message_types. Acked-by:
Evgeniy Polyakov <zbr@ioremap.net> Signed-off-by:
Jonathan Corbet <corbet@lwn.net>
-
Mauro Carvalho Chehab authored
When kernel-doc is called with output selection filters, it will be called lots of time for a single file. If there is a warning present there, it means that it may print hundreds of identical warnings. Worse than that, the -function NAME actually filters only functions. So, it makes no sense at all to print warnings for structs or enums. Signed-off-by:
-
Mauro Carvalho Chehab authored
It is possible to use nested structs like: struct { struct { void *arg1; } st1, st2, *st3, st4; }; Handling it requires to split each parameter. Change the logic to allow such definitions. In order to test the new nested logic, the following file was used to test <code> struct foo { int a; }; /* Just to avoid errors if compiled */ /** * struct my_struct - a struct with nested unions and structs * @arg1: first argument of anonymous union/anonymous struct * @arg2: second argument of anonymous union/anonymous struct * @arg1b: first argument of anonymous union/anonymous struct * @arg2b: second argument of anonymous union/anonymous struct * @arg3: third argument of anonymous union/anonymous struct * @arg4: fourth argument of anonymous union/anonymous struct * @bar.st1.arg1: first argument of struct st1 on union bar * @bar.st1.arg2: second argument of struct st1 on union bar * @bar.st1.bar1: bar1 at st1 * @bar.st1.bar2: bar2 at st1 * @bar.st2.arg1: first argument of struct st2 on union bar * @bar.st2.arg2: second argument of struct st2 on union bar * @bar.st3.arg2: second argument of struct st3 on union bar * @f1: nested function on anonimous union/struct * @bar.st2.f2: nested function on named union/struct */ struct my_struct { /* Anonymous union/struct*/ union { struct { char arg1 : 1; char arg2 : 3; }; struct { int arg1b; int arg2b; }; struct { void *arg3; int arg4; int (*f1)(char foo, int bar); }; }; union { struct { int arg1; int arg2; struct foo bar1, *bar2; } st1; /* bar.st1 is undocumented, cause a warning */ struct { void *arg1; /* bar.st3.arg1 is undocumented, cause a warning */ int arg2; int (*f2)(char foo, int bar); /* bar.st3.fn2 is undocumented, cause a warning */ } st2, st3, *st4; int (*f3)(char foo, int bar); /* f3 is undocumented, cause a warning */ } bar; /* bar is undocumented, cause a warning */ /* private: */ int undoc_privat; /* is undocumented but private, no warning */ /* public: */ int undoc_public; /* is undocumented, cause a warning */ }; </code> It produces the following warnings, as expected: test2.h:57: warning: Function parameter or member 'bar' not described in 'my_struct' test2.h:57: warning: Function parameter or member 'bar.st1' not described in 'my_struct' test2.h:57: warning: Function parameter or member 'bar.st2' not described in 'my_struct' test2.h:57: warning: Function parameter or member 'bar.st3' not described in 'my_struct' test2.h:57: warning: Function parameter or member 'bar.st3.arg1' not described in 'my_struct' test2.h:57: warning: Function parameter or member 'bar.st3.f2' not described in 'my_struct' test2.h:57: warning: Function parameter or member 'bar.st4' not described in 'my_struct' test2.h:57: warning: Function parameter or member 'bar.st4.arg1' not described in 'my_struct' test2.h:57: warning: Function parameter or member 'bar.st4.arg2' not described in 'my_struct' test2.h:57: warning: Function parameter or member 'bar.st4.f2' not described in 'my_struct' test2.h:57: warning: Function parameter or member 'bar.f3' not described in 'my_struct' test2.h:57: warning: Function parameter or member 'undoc_public' not described in 'my_struct' Suggested-by:Markus Heiser <markus.heiser@darmarit.de> Signed-off-by:
-
Mauro Carvalho Chehab authored
Function arguments are different than usual ones. So, an special logic is needed in order to handle such arguments on nested structs. Signed-off-by:
-
Mauro Carvalho Chehab authored
The logic at create_parameterlist()'s ancillary push_parameter() function has already a way to output the declaration name, with would help to discover what declaration is missing. However, currently, the logic is utterly broken, as it uses the var $type with a wrong meaning. With the current code, it will never print anything. I suspect that originally it was using the second argument of output_declaration(). I opted to not rely on a globally defined $declaration_name, but, instead, to pass it explicitly as a parameter. While here, I removed a unaligned check for !$anon_struct_union. This is not needed, as, if $anon_struct_union is not zero, $parameterdescs{$param} will be defined. Signed-off-by: -
Mauro Carvalho Chehab authored
The check_sections() function has a $nested parameter, meant to identify when a nested struct is present. As we now have a logic that handles it, get rid of such parameter. Suggested-by:
-
