- 25 Feb, 2009 2 commits
-
-
Jesse Brandeburg authored
it was pointed out on the list that ixgbe was failing when using 64kB pages and large 16kB MTU. since with a 64kB PAGE_SIZE MAX_SKB_FRAGS = 3, the way the driver was configuring page usage was assuming 2kB is half a page, and was only ever dmaing that much data to a half page. (16kB - header size) / 2048 = 7 or 8 pages, which would far exceed 3 adjust the driver to account for these large pages, the hardware can support DMA to up to 16kB for each descriptor. Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Shannon Nelson authored
From: Shannon Nelson <shannon.nelson@intel.com> The ring_feature member of ixgbe_adapter is statically allocated based on the supported features of the device. When a new feature is added, we need to manually update the static allocation. This patch makes the feature list an enum, eliminating the need for multiple updates to the code when adding a new feature. Signed-off-by: Peter P Waskiewicz Jr <peter.p.waskiewicz.jr@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
- 24 Feb, 2009 11 commits
-
-
David S. Miller authored
-
David S. Miller authored
-
Jesper Dangaard Brouer authored
The IP_ADVANCED_ROUTER Kconfig describes the rp_filter proc option. Recent changes added a loose mode. Instead of documenting this change too places, refer to the document describing it: Documentation/networking/ip-sysctl.txt I'm considering moving the rp_filter description away from the Kconfig file into ip-sysctl.txt. Signed-off-by: Jesper Dangaard Brouer <hawk@comx.dk> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Jesper Dangaard Brouer authored
Fix up whitespaces while going though ip-sysctl.txt anyway. Signed-off-by: Jesper Dangaard Brouer <hawk@comx.dk> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Jesper Dangaard Brouer authored
First fix a typo in Stephens patch ;-) Signed-off-by: Jesper Dangaard Brouer <hawk@comx.dk> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Dhananjay Phadke authored
PCI bar 0 is used for memory mapped register access. If ioremap fails (returns NULL), register access results in crash. Use pci_ioremap_bar() instead of ioremap(), the latter fails on on 32 bit powerpc where pci resource address is > 32 bits. Signed-off-by: Dhananjay Phadke <dhananjay@netxen.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Dhananjay Phadke authored
The PCI function to physical port mapping is valid only for old firmware. New firmware (4.0.0+) abstracts this. So driver should never try to access phy using invalid mapping. The behavior is unpredictable when PCI functions 4-7 are enabled on the same NIC. Signed-off-by: Dhananjay Phadke <dhananjay@netxen.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6Linus Torvalds authored
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6: net: amend the fix for SO_BSDCOMPAT gsopt infoleak netns: build fix for net_alloc_generic
-
Krzysztof Sachanowicz authored
de_get is called before every proc_get_inode, but corresponding de_put is called only when dropping last reference to an inode. This might cause something like remove_proc_entry: /proc/stats busy, count=14496 to be printed to the syslog. The fix is to call de_put in case of an already initialized inode in proc_get_inode. Signed-off-by: Krzysztof Sachanowicz <analyzer1@gmail.com> Tested-by: Marcin Pilipczuk <marcin.pilipczuk@gmail.com> Acked-by: Al Viro <viro@ZenIV.linux.org.uk> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Jesse Barnes authored
In the KMS case, enter/leavevt won't fix up the interrupt handler for us, so we need to do it at suspend/resume time. Make sure we don't fail the resume if the chip is hung either. Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Karsten Wiese authored
dev_priv->hw_status_page can be NULL, if i915_gem_retire_requests() is called from i915_gem_busy_ioctl(). Signed-off-by Karsten Wiese <fzu@wemgehoertderstaat.de> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
- 23 Feb, 2009 24 commits
-
-
Eugene Teo authored
The fix for CVE-2009-0676 (upstream commit df0bca04) is incomplete. Note that the same problem of leaking kernel memory will reappear if someone on some architecture uses struct timeval with some internal padding (for example tv_sec 64-bit and tv_usec 32-bit) --- then, you are going to leak the padded bytes to userspace. Signed-off-by: Eugene Teo <eugeneteo@kernel.sg> Reported-by: Mikulas Patocka <mpatocka@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Clemens Noss authored
net_alloc_generic was defined in #ifdef CONFIG_NET_NS, but used unconditionally. Move net_alloc_generic out of #ifdef. Signed-off-by: Clemens Noss <cnoss@gmx.de> Signed-off-by: David S. Miller <davem@davemloft.net>
-
git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6Linus Torvalds authored
* git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: crypto: ahash - Fix digest size in /proc/crypto
-
git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6Linus Torvalds authored
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6: netns: fix double free at netns creation veth : add the set_mac_address capability sunlance: Beyond ARRAY_SIZE of ib->btx_ring sungem: another error printed one too early ISDN: fix sc/shmem printk format warning SMSC: timeout reaches -1 smsc9420: handle magic field of ethtool_eeprom sundance: missing parentheses? smsc9420: fix another postfixed timeout wimax/i2400m: driver loads firmware v1.4 instead of v1.3 vlan: Update skb->mac_header in __vlan_put_tag(). cxgb3: Add support for PCI ID 0x35. tcp: remove obsoleted comment about different passes TG3: &&/|| confusion ATM: misplaced parentheses? net/mv643xx: don't disable the mib timer too early and lock properly net/mv643xx: use GFP_ATOMIC while atomic atl1c: Atheros L1C Gigabit Ethernet driver net: Kill skb_truesize_check(), it only catches false-positives. net: forcedeth: Fix wake-on-lan regression
-
Linus Torvalds authored
-
Randy Dunlap authored
Add missing parameter value to list of available values for acpi=<value>. Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Eric W. Biederman authored
It turns out that net_alive is unnecessary, and the original problem that led to it being added was simply that the icmp code thought it was a network device and wound up being unable to handle packets while there were still packets in the network namespace. Now that icmp and tcp have been fixed to properly register themselves this problem is no longer present and we have a stronger guarantee that packets will not arrive in a network namespace then that provided by net_alive in netif_receive_skb. So remove net_alive allowing packet reception run a little faster. Additionally document the strong reason why network namespace cleanup is safe so that if something happens again someone else will have a chance of figuring it out. Signed-off-by: Eric W. Biederman <ebiederm@aristanetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Eric W. Biederman authored
To remove the possibility of packets flying around when network devices are being cleaned up use reisger_pernet_subsys instead of register_pernet_device. Signed-off-by: Eric W. Biederman <ebiederm@aristanetworks.com> Acked-by: Denis V. Lunev <den@openvz.org> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Eric W. Biederman authored
Recently I had a kernel panic in icmp_send during a network namespace cleanup. There were packets in the arp queue that failed to be sent and we attempted to generate an ICMP host unreachable message, but failed because icmp_sk_exit had already been called. The network devices are removed from a network namespace and their arp queues are flushed before we do attempt to shutdown subsystems so this error should have been impossible. It turns out icmp_init is using register_pernet_device instead of register_pernet_subsys. Which resulted in icmp being shut down while we still had the possibility of packets in flight, making a nasty NULL pointer deference in interrupt context possible. Changing this to register_pernet_subsys fixes the problem in my testing. Signed-off-by: Eric W. Biederman <ebiederm@aristanetworks.com> Acked-by: Denis V. Lunev <den@openvz.org> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Jesper Dangaard Brouer authored
While going through net/ipv4/Kconfig cleanup whitespaces. Signed-off-by: Jesper Dangaard Brouer <hawk@comx.dk> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Jesper Dangaard Brouer authored
The reverse path filter (rp_filter) will NOT get enabled when enabling forwarding. Read the code and tested in in practice. Most distributions do enable it in startup scripts. Signed-off-by: Jesper Dangaard Brouer <hawk@comx.dk> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Stephen Hemminger authored
If this module can't load, it is almost certainly because something else is already bound to that SAP. So in that case, return the same error code as other SAP usage, and fail the module load. Also fixes a compiler warning about printk of non const. Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Acked-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Stephen Hemminger authored
Mark some strings as const. Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Acked-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Stephen Hemminger authored
Get rid of compile warning about non-const format Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Stephen Hemminger authored
Extend existing reverse path filter option to allow strict or loose filtering. (See http://en.wikipedia.org/wiki/Reverse_path_filtering). For compatibility with existing usage, the value 1 is chosen for strict mode and 2 for loose mode. Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
David S. Miller authored
This reverts commit 7d3d5ec1. Russell is going to merge this in via the ARM tree. Signed-off-by: David S. Miller <davem@davemloft.net>
-
git://git.kernel.org/pub/scm/linux/kernel/git/airlied/drm-2.6Linus Torvalds authored
* 'drm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/airlied/drm-2.6: drm/i915: Add missing mutex_lock(&dev->struct_mutex) drm/i915: fix WC mapping in non-GEM i915 code. drm/i915: Fix regression in 95ca9d drm/i915: Retire requests from i915_gem_busy_ioctl. drm/i915: suspend/resume GEM when KMS is active drm/i915: Don't let a device flush to prepare buffers clear new write_domains. drm/i915: Cut two args to set_to_gpu_domain that confused this tricky path.
-
Pierre Willenbrock authored
there might be a nicer way to fix this but this is the simplest for now. Signed-off-by: Pierre Willenbrock <pierre@pirsoft.de> Signed-off-by: Dave Airlie <airlied@redhat.com>
-
Jesse Barnes authored
[airlied - taken from mailing list posting] Signed-off-by: Dave Airlie <airlied@redhat.com>
-
Chris Wilson authored
The object is dereferenced before the NULL check. Oops. Fixes http://bugs.freedesktop.org/show_bug.cgi?id=20235Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Eric Anholt <eric@anholt.net> Signed-off-by: Dave Airlie <airlied@redhat.com>
-
Eric Anholt authored
This ensures that the user gets the latest information from the hardware on whether the buffer is busy, potentially reducing the working set of objects that the user chooses. Signed-off-by: Eric Anholt <eric@anholt.net> Signed-off-by: Dave Airlie <airlied@redhat.com>
-
Jesse Barnes authored
In the KMS case, we need to suspend/resume GEM as well. So on suspend, make sure we idle GEM and stop any new rendering from coming in, and on resume, re-init the framebuffer and clear the suspended flag. Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org> Signed-off-by: Eric Anholt <eric@anholt.net> Signed-off-by: Dave Airlie <airlied@redhat.com>
-
Eric Anholt authored
The problem was that object_set_to_gpu_domain would set the new write_domains that are getting set by this batchbuffer, then the accumulated flushes required for all the objects in preparation for this batchbuffer were posted, and the brand new write domain would get cleared by the flush being posted. Instead, hang on to the new (or old if we're not changing it) value and set it after the flush is queued. Results from this noticably included conformance test failures from reads shortly after writes (where the new write domain had been lost and thus not flushed and waited on), but is a suspected cause of hangs in some apps when a write domain is lost on a buffer that gets reused for instruction or commmand state. Signed-off-by: Eric Anholt <eric@anholt.net> Signed-off-by: Dave Airlie <airlied@redhat.com>
-
Eric Anholt authored
While not strictly required, it helped while thinking about the following change. This change should be invariant. Signed-off-by: Eric Anholt <eric@anholt.net> Signed-off-by: Dave Airlie <airlied@redhat.com>
-
- 22 Feb, 2009 3 commits
-
-
Paul Moore authored
At some point we (okay, I) managed to break the ability for users to use the setsockopt() syscall to set IPv4 options when NetLabel was not active on the socket in question. The problem was noticed by someone trying to use the "-R" (record route) option of ping: # ping -R 10.0.0.1 ping: record route: No message of desired type The solution is relatively simple, we catch the unlabeled socket case and clear the error code, allowing the operation to succeed. Please note that we still deny users the ability to override IPv4 options on socket's which have NetLabel labeling active; this is done to ensure the labeling remains intact. Signed-off-by: Paul Moore <paul.moore@hp.com> Signed-off-by: James Morris <jmorris@namei.org>
-
Paul Moore authored
The CIPSO protocol engine incorrectly stated that the FIPS-188 specification could be found in the kernel's Documentation directory. This patch corrects that by removing the comment and directing users to the FIPS-188 documented hosted online. For the sake of completeness I've also included a link to the CIPSO draft specification on the NetLabel website. Thanks to Randy Dunlap for spotting the error and letting me know. Signed-off-by: Paul Moore <paul.moore@hp.com> Signed-off-by: James Morris <jmorris@namei.org>
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tipLinus Torvalds authored
* 'core/urgent' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: PM: Split up sysdev_[suspend|resume] from device_power_[down|up], fix
-