- 27 Sep, 2017 5 commits
-
-
Eric Anholt authored
We need the following things to happen in sequence: DSI host creation DSI device creation in the panel driver (needs DSI host) DSI device attach from panel to host. DSI drm_panel_add() DSI encoder creation DSI encoder's DRM panel/bridge attach Unless we allow device creation while the host isn't up yet, we need to break the -EPROBE_DEFER deadlock between the panel driver looking up the host and the host driver looking up the panel. We can do so by moving the DSI host creation outside of the component bind loop, and the panel/bridge lookup/attach into the component bind process. Signed-off-by:
Eric Anholt <eric@anholt.net> Link: https://patchwork.freedesktop.org/patch/msgid/20170815234722.20700-3-eric@anholt.netReviewed-by:
Archit Taneja <architt@codeaurora.org>
-
Eric Anholt authored
The incoming mode might have a missing vrefresh field if it came from drmModeSetCrtc(), which the kernel is supposed to calculate using drm_mode_vrefresh(). We could either use that or the adjusted_mode's original vrefresh value. However, we can maintain a more exact vrefresh value (not just the integer approximation), by scaling by the ratio of our clocks. v2: Use math suggested by Andrzej Hajda instead. v3: Simplify math now that adjusted_mode->clock isn't padded. v4: Drop some parens. Signed-off-by:
Andrzej Hajda <a.hajda@samsung.com>
-
Meghana Madhyastha authored
Add a summary which resulted from discussions on what should be done to refactor backlight helpers in tinydrm so that they can be used in other drivers as well. Signed-off-by:
Meghana Madhyastha <meghana.madhyastha@gmail.com> Signed-off-by:
Daniel Vetter <daniel.vetter@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/msgid/20170927105116.GA30391@meghana-HP-Pavilion-Notebook
-
Aishwarya Pant authored
This is a continuation of a previous commit ("drm: introduce drm_dev_{get/put} functions") to replace all references to drm_dev_unref() in drm core files with drm_dev_put(). Signed-off-by:Aishwarya Pant <aishpant@gmail.com> Signed-off-by:
-
Haneen Mohammed authored
This patch remove the todo item "Use new IDR deletion interface to clean up drm_gem_handle_delete()" after it has been resolved with the commit "drm: Remove obsolete "This is gross" comment". Signed-off-by:
Haneen Mohammed <hamohammed.sa@gmail.com> Signed-off-by:
-
- 26 Sep, 2017 5 commits
-
-
Aishwarya Pant authored
For maintaining consistency with kernel coding style replace reference/unreference in ref counting functions with get/put. The following cocci script was used to generate the tilcdc patch: @@ expression ex; @@ ( -drm_framebuffer_unreference(ex); +drm_framebuffer_put(ex); | -drm_dev_unref(ex); +drm_dev_put(ex); | -drm_framebuffer_reference(ex); +drm_framebuffer_get(ex); ) Signed-off-by:
Jyri Sarha <jsarha@ti.com> Signed-off-by:
-
Aishwarya Pant authored
Reference counting functions in the kernel typically use get/put suffixes. For maintaining coding style consistency, introduce drm_dev_{get/put} functions. All callers of drm_dev_ref() API have been converted in this patch and hence it has been dropped while the drm_dev_unref() API with non-trivial number of users remains for compatibility. The semantic patch scripts/coccinelle/api/drm-get-put.cocci has been updated with the new helper for conversion of drm_dev_unref() to drm_dev_put() Signed-off-by: -
Thomas Meyer authored
Use vma_pages function on vma object instead of explicit computation. Found by coccinelle spatch "api/vma_pages.cocci" Signed-off-by:
Thomas Meyer <thomas@m3y3r.de> Signed-off-by:
Mark Yao <mark.yao@rock-chips.com> Link: https://patchwork.freedesktop.org/patch/msgid/1505946334393-988165015-7-diffsplit-thomas@m3y3r.de
-
Haneen Mohammed authored
Remove obsolete comment which was initially added in 2008 to annotate that idr_find() was used before idr_remove() since idr_remove() didn't use to return feedback. The comment now is irrelevant with commit f6cd7dae ("drm: Release driver references to handle before making it available again"). Signed-off-by:
-
Daniel Vetter authored
Due to inconsistency of how various legacy drivers implemented DPMS the DPMS uabi has a lot of quirks. Atomic standardizes this, but drivers using the DPMS support can't rely on that since legacy drivers still exist. Laurent asked for this. v2: Improve commit message and explain that DPMS doesn't really exist for the atomic ioctl (it's "ACTIVE" on the CRTC instead). Text polish from Eric's review. Cc: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Signed-off-by:
Daniel Vetter <daniel.vetter@intel.com> Cc: Daniel Vetter <daniel.vetter@intel.com> Cc: Jani Nikula <jani.nikula@linux.intel.com> Cc: Sean Paul <seanpaul@chromium.org> Cc: David Airlie <airlied@linux.ie> Cc: Eric Anholt <eric@anholt.net> Reviewed-by:
Sean Paul <seanpaul@chromium.org> Link: https://patchwork.freedesktop.org/patch/msgid/20170920225957.16278-1-daniel.vetter@ffwll.ch
-
- 21 Sep, 2017 1 commit
-
-
Sean Paul authored
If there are no children for lvds, ret is used uninitialized. This patch initializes ret and returns an error if the port has no children. Fixes: 34cc0aa2 ("drm/rockchip: Add support for Rockchip Soc LVDS") Cc: Mark Yao <mark.yao@rock-chips.com> Cc: Heiko Stuebner <heiko@sntech.de> Cc: Sandy Huang <hjc@rock-chips.com> Cc: dri-devel@lists.freedesktop.org Cc: linux-arm-kernel@lists.infradead.org Cc: linux-rockchip@lists.infradead.org Reviewed-by:
-
- 20 Sep, 2017 5 commits
-
-
Colin Ian King authored
sg_table is being initialized and is never read before it is updated again later on, hence making the initialization redundant. Remove the initialization. Detected by clang scan-build: "warning: Value stored to 'sg_table' during its initialization is never read" Signed-off-by:
Colin Ian King <colin.king@canonical.com> Reviewed-by:
Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by:
-
Meghana Madhyastha authored
Remove extra blank line to adhere to standard coding style. Found by checkpath.pl.. Signed-off-by:
-
Meghana Madhyastha authored
EXPORT_SYMBOL(foo) should immediately follow its function/variable. This coding style is preferred. Found by checkpath.pl. Signed-off-by:
-
Meghana Madhyastha authored
Move the assignment so that it happens before the if condition. Merged multiple similar conditionals to a single conditional statement. This results in syntax which is easier to read. Found by checkpath.pl Signed-off-by:
-
Meghana Madhyastha authored
This replaces all instances of foo * bar with foo *bar in drm_agpsupport.c. This is so that it adheres to standard C syntax for pointers. Signed-off-by:
-
- 19 Sep, 2017 2 commits
-
-
Jani Nikula authored
Add drm_kms_helper.edid_firmware module parameter with param ops hooks to set drm.edid_firmware instead, for backwards compatibility. Suggested-by:
Ville Syrjälä <ville.syrjala@linux.intel.com> Cc: Abdiel Janulgue <abdiel.janulgue@linux.intel.com> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by:
Dave Airlie <airlied@gmail.com> Signed-off-by:
Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20170918182003.22238-2-jani.nikula@intel.com
-
Jani Nikula authored
Handle debugfs override edid and firmware edid at the low level to transparently and completely replace the real edid. Previously, we practically only used the modes from the override EDID, and none of the other data, such as audio parameters. This change also prevents actual EDID reads when the EDID is to be overridden, but retains the DDC probe. This is useful if the reason for preferring override EDID are problems with reading the data, or corruption of the data. Move firmware EDID loading from helper to core, as the functionality moves to lower level as well. This will result in a change of module parameter from drm_kms_helper.edid_firmware to drm.edid_firmware, which arguably makes more sense anyway. Some future work remains related to override and firmware EDID validation. Like before, no validation is done for override EDID. The firmware EDID is validated separately in the loader. Some unification and deduplication would be in order, to validate all of them at the drm_do_get_edid() level, like "real" EDIDs. v2: move firmware loading to core v3: rebase, commit message refresh Cc: Abdiel Janulgue <abdiel.janulgue@linux.intel.com> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Tested-by:
Abdiel Janulgue <abdiel.janulgue@linux.intel.com> Reviewed-by:
-
- 18 Sep, 2017 2 commits
-
-
Dhinakaran Pandiyan authored
Link status is available in the ESI field on devices with DPCD r1.2 or higher. DP spec also says "An MST upstream device shall use this field instead of the Link/Sink Device Status field registers, starting from DPCD Address 00200h." v2: Prefixed DP_ (Jani) Rewrote commment to stay within 80 cols. Cc: Jani Nikula <jani.nikula@intel.com> Reviewed-by:Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com> Signed-off-by:
-
Haneen Mohammed authored
This patch replace instances of dev_info/err/debug with DRM_DEV_INFO/ERROR/WARN respectively inorder to use a drm-formatted specific log messages. Issue corrected with the help of the following Coccinelle script: @r@ @@ ( -dev_info +DRM_DEV_INFO | -dev_err +DRM_DEV_ERROR | -dev_dbg +DRM_DEV_DEBUG ) Signed-off-by:
-
- 16 Sep, 2017 7 commits
-
-
Noralf Trønnes authored
No need to put out a driver registered message since drm_dev_register() does that now. SPI speed is an important metric when dealing with display problems, so retain that info. Cc: David Lechner <david@lechnology.com> Signed-off-by:
Noralf Trønnes <noralf@tronnes.org> Acked-by:
David Lechner <david@lechnology.com> Link: https://patchwork.freedesktop.org/patch/msgid/1504883250-43487-8-git-send-email-noralf@tronnes.org
-
Noralf Trønnes authored
GEM lookup failure can easily be triggered by userspace so make it a debug message, not an error message. Also remove unnecessary inner parentheses and fix alphabetical struct declaration order. Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by:
Laurent Pinchart <laurent.pinchart@ideasonboard.com> Link: https://patchwork.freedesktop.org/patch/msgid/1505147865-18194-2-git-send-email-noralf@tronnes.org
-
Noralf Trønnes authored
drm_fb_cma_create() and drm_fb_cma_prepare_fb() are just wrappers now, use drm_gem_fb_create() and drm_gem_fb_prepare_fb() directly. Cc: Philipp Zabel <p.zabel@pengutronix.de> Signed-off-by:
Philipp Zabel <p.zabel@pengutronix.de> Link: https://patchwork.freedesktop.org/patch/msgid/1502631125-13557-11-git-send-email-noralf@tronnes.org
-
Lars-Peter Clausen authored
The HDMI codec platform data is global driver state shared by all instances. As such it should not be modified (and is not), to make this explicit declare it as const. Signed-off-by:
Lars-Peter Clausen <lars@metafoo.de> Tested-by:
John Stultz <john.stultz@linaro.org> Signed-off-by:
-
Lars-Peter Clausen authored
Fall back to polling the connector for connect and disconnect events when no interrupt is specified. Otherwise these events will not be noticed and monitor hotplug does not work. Signed-off-by:
-
Lars-Peter Clausen authored
The adv7511 driver keeps a private copy of the EDID in its driver state struct. But this copy is only used in adv7511_get_modes() where it is also retrieved, so there is no need to keep this extra copy around. If a need to access the EDID elsewhere in the driver ever arises the copy that is stored in the connector can be used. This copy is accessible through drm_connector_get_edid(). Note, this patch removes the NULL check of the EDID before passing it to drm_detect_hdmi_monitor(), but that is fine since the function correctly handles the case where the EDID is NULL. Signed-off-by:
-
Lars-Peter Clausen authored
Currently adv7511_get_modes() bails out early when no EDID could be retrieved. This leaves the previous EDID in place, which is typically not the intended behavior and might confuse applications. Instead the EDID should be cleared when no EDID could be retrieved. All functions that are called after the EDID check handle the case where the EDID is NULL just fine and exhibit the expected behavior, so just drop the check. Signed-off-by:
-
- 13 Sep, 2017 6 commits
-
-
Maarten Lankhorst authored
Pass DRM_MODESET_ACQUIRE_INTERRUPTIBLE to acquire_init, and handle drm_modeset_backoff which can now fail by returning the error. Signed-off-by:
Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/msgid/20170912133749.6532-7-maarten.lankhorst@linux.intel.comReviewed-by:
Emil Velikov <emil.l.velikov@gmail.com>
-
Maarten Lankhorst authored
Pass DRM_MODESET_ACQUIRE_INTERRUPTIBLE to acquire_init, and handle drm_modeset_backoff which can now fail by returning the error. Signed-off-by:
-
Maarten Lankhorst authored
Pass DRM_MODESET_ACQUIRE_INTERRUPTIBLE to acquire_init, and handle drm_modeset_backoff which can now fail by returning the error. Signed-off-by:
-
Maarten Lankhorst authored
Pass DRM_MODESET_ACQUIRE_INTERRUPTIBLE to acquire_init, and handle drm_modeset_backoff which can now fail by returning the error. Signed-off-by:
-
Maarten Lankhorst authored
Pass DRM_MODESET_ACQUIRE_INTERRUPTIBLE to acquire_init, and handle drm_modeset_backoff which can now fail by returning the error. Signed-off-by:
-
Maarten Lankhorst authored
When we want to make drm_atomic_commit interruptible, there are a lot of places that call the lock function, which we don't have control over. Rather than trying to convert every single one, it's easier to toggle interruptible waiting per acquire_ctx. If drm_modeset_acquire_init is called with DRM_MODESET_ACQUIRE_INTERRUPTIBLE, then we will perform interruptible waits in drm_modeset_lock and drm_modeset_backoff. Changes since v1: - Fix locking example in drm_modeset_lock.c to be compatible with interruptible waiting (xexaxo) and make it default. Uninterruptible waiting shouldn't happen except in corner cases, but the example will still apply if the flag is removed. - Add drm_modeset_lock_single_interruptible() to documentation. - Fix dead link to removed drm_modeset_lock_interruptible() in drm_modeset_lock(). Signed-off-by:
-
- 11 Sep, 2017 6 commits
-
-
Linus Walleij authored
This makes use of the drm_simple_display_pipe_attach_bridge() call and removes the two calls removing the bridge, which were erroneous: they unregister the bridge which is not what we want, we just want to unreference it and that is already handled by the core. Reviewed-by:
Linus Walleij <linus.walleij@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/20170910220801.28588-1-linus.walleij@linaro.org
-
Daniel Vetter authored
We're using this for outreachy, unfortunately someone already tried to look at a task that was done already :-( Update them all. Cc: Sean Paul <seanpaul@chromium.org> Signed-off-by:
-
Dhinakaran Pandiyan authored
The POWER_DOWN_PHY and POWER_UP_PHY sideband message transactions allow the source to reqest any node in a mst path or a whole path to be powered down or up. This allows drivers to target a specific sink in the MST topology, an improvement over just power managing the imediate downstream device. Secondly, since the request-reply protocol waits for an ACK, we can be sure that a downstream sink has enough time to respond to a power up/down request. v2: Fix memory leak (Lyude) Cc: Lyude <lyude@redhat.com> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Cc: Harry Wentland <harry.wentland@amd.com> Signed-off-by:
Lyude Paul <lyude@redhat.com> Signed-off-by:
-
Ville Syrjälä authored
Make __drm_object_property_get_value() static to fix the following sparse warning: drm_mode_object.c:250:5: warning: symbol '__drm_object_property_get_value' was not declared. Should it be static? Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Fixes: 4a97a3da ("drm: Don't update property values for atomic drivers") Signed-off-by:
Thierry Reding <treding@nvidia.com>
-
Ville Syrjälä authored
drm_get_link_status_name() isn't used so kill it. Fixes the following sparse warning: drm_connector.c:618:1: warning: symbol 'drm_get_link_status_name' was not declared. Should it be static? Cc: Manasi Navare <manasi.d.navare@intel.com> Fixes: 40ee6fbe ("drm: Add a new connector atomic property for link status") Signed-off-by:
-
Ville Syrjälä authored
Fix the following sparse warnings by making functions static: drm_syncobj.c:420:5: warning: symbol 'drm_syncobj_import_sync_file_fence' was not declared. Should it be static? drm_syncobj.c:441:5: warning: symbol 'drm_syncobj_export_sync_file' was not declared. Should it be static? Cc: Dave Airlie <airlied@redhat.com> Fixes: 3ee45a3b ("drm/syncobj: add sync_file interaction. (v1.2)") Signed-off-by:
-
- 10 Sep, 2017 1 commit
-
-
Linus Walleij authored
The ARM reference designs in the Versatile family: Integrator, Versatile and RealView can make use of the new DRM driver as well. We just need to create a bit of platform-specific code for them that we isolate to its own file. Reviewed-by:
-
