The undocumented 'icebp' instruction (aka 'int1') works pretty much like
'int3' in the absense of in-circuit probing equipment (except,
obviously, that it raises #DB instead of raising #BP), and is used by
some validation test-suites as such.

But Andy Lutomirski noticed that his test suite acted differently in kvm
than on bare hardware.

The reason is that kvm used an inexact test for the icebp instruction:
it just assumed that an all-zero VM exit qualification value meant that
the VM exit was due to icebp.

That is not unlike the guess that do_debug() does for the actual
exception handling case, but it's purely a heuristic, not an absolute
rule.  do_debug() does it because it wants to ascribe _some_ reasons to
the #DB that happened, and an empty %dr6 value means that 'icebp' is the
most likely casue and we have no better information.

But kvm can just do it right, because unlike the do_debug() case, kvm
actually sees the real reason for the #DB in the VM-exit interruption
information field.

So instead of relying on an inexact heuristic, just use the actual VM
exit information that says "it was 'icebp'".

Right now the 'icebp' instruction isn't technically documented by Intel,
but that will hopefully change.  The special "privileged software
exception" information _is_ actually mentioned in the Intel SDM, even
though the cause of it isn't enumerated.
Reported-by: Andy Lutomirski <luto@kernel.org>
Tested-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Pull cgroup fixes from Tejun Heo:
 "Two commits to fix the following subtle cgroup2 behavior bugs:

   - cpu.max was rejecting config when it shouldn't

   - thread mode enable was allowed when it shouldn't"

* 'for-4.16-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup:
  cgroup: fix rule checking for threaded mode switching
  sched, cgroup: Don't reject lower cpu.max on ancestors

Pull workqueue fixes from Tejun Heo:
 "Two low-impact workqueue commits.

  One fixes workqueue creation error path and the other removes the
  unused cancel_work()"

* 'for-4.16-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/wq:
  workqueue: remove unused cancel_work()
  workqueue: use put_device() instead of kfree()

Pull percpu fixes from Tejun Heo:
 "Late percpu pull request for v4.16-rc6.

   - percpu allocator pool replenishing no longer triggers OOM or
     warning messages.

     Also, the alloc interface now understands __GFP_NORETRY and
     __GFP_NOWARN. This is to allow avoiding OOMs from userland
     triggered actions like bpf map creation.

     Also added cond_resched() in alloc loop.

   - perpcu allocation now can be interrupted by kill sigs to avoid
     deadlocking OOM killer.

   - Added Dennis Zhou as a co-maintainer.

     He has rewritten the area map allocator, understands most of the
     code base and has been responsive for all bug reports"

* 'for-4.16-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/percpu:
  percpu_ref: Update doc to dissuade users from depending on internal RCU grace periods
  mm: Allow to kill tasks doing pcpu_alloc() and waiting for pcpu_balance_workfn()
  percpu: include linux/sched.h for cond_resched()
  percpu: add a schedule point in pcpu_balance_workfn()
  percpu: allow select gfp to be passed to underlying allocators
  percpu: add __GFP_NORETRY semantics to the percpu balancing path
  percpu: match chunk allocator declarations with definitions
  percpu: add Dennis Zhou as a percpu co-maintainer

Pull libata fixes from Tejun Heo:
 "I sat on them too long and it's quite a few this late, but nothing has
  a wide blast area. The changes are...

   - Fix corner cases in SG command handling.

   - Recent introduction of default powersaving mode config option
     exposed several devices with broken powersaving behaviors. A number
     of patches to update the blacklist accordingly.

   - Fix a kernel panic on SAS hotplug.

   - Other misc and device specific updates"

* 'for-4.16-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/libata:
  libata: Modify quirks for MX100 to limit NCQ_TRIM quirk to MU01 version
  libata: Make Crucial BX100 500GB LPM quirk apply to all firmware versions
  libata: Apply NOLPM quirk to Crucial M500 480 and 960GB SSDs
  libata: Enable queued TRIM for Samsung SSD 860
  PCI: Add function 1 DMA alias quirk for Highpoint RocketRAID 644L
  ahci: Add PCI-id for the Highpoint Rocketraid 644L card
  ata: do not schedule hot plug if it is a sas host
  libata: disable LPM for Crucial BX100 SSD 500GB drive
  libata: Apply NOLPM quirk to Crucial MX100 512GB SSDs
  libata: update documentation for sysfs interfaces
  ata: sata_rcar: Remove unused variable in sata_rcar_init_controller()
  libata: transport: cleanup documentation of sysfs interface
  sata_rcar: Reset SATA PHY when Salvator-X board resumes
  libata: don't try to pass through NCQ commands to non-NCQ devices
  libata: remove WARN() for DMA or PIO command without data
  libata: fix length validation of ATAPI-relayed SCSI commands
  ata: libahci: fix comment indentation
  ahci: Add check for device presence (PCIe hot unplug) in ahci_stop_engine()
  libata: Fix compile warning with ATA_DEBUG enabled

percpu_ref internally uses sched-RCU to implement the percpu -> atomic
mode switching and the documentation suggested that this could be
depended upon.  This doesn't seem like a good idea.

* percpu_ref uses sched-RCU which has different grace periods regular
  RCU.  Users may combine percpu_ref with regular RCU usage and
  incorrectly believe that regular RCU grace periods are performed by
  percpu_ref.  This can lead to, for example, use-after-free due to
  premature freeing.

* percpu_ref has a grace period when switching from percpu to atomic
  mode.  It doesn't have one between the last put and release.  This
  distinction is subtle and can lead to surprising bugs.

* percpu_ref allows starting in and switching to atomic mode manually
  for debugging and other purposes.  This means that there may not be
  any grace periods from kill to release.

This patch makes it clear that the grace periods are percpu_ref's
internal implementation detail and can't be depended upon by the
users.
Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Kent Overstreet <kent.overstreet@gmail.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Tejun Heo <tj@kernel.org>

In case of memory deficit and low percpu memory pages,
pcpu_balance_workfn() takes pcpu_alloc_mutex for a long
time (as it makes memory allocations itself and waits
for memory reclaim). If tasks doing pcpu_alloc() are
choosen by OOM killer, they can't exit, because they
are waiting for the mutex.

The patch makes pcpu_alloc() to care about killing signal
and use mutex_lock_killable(), when it's allowed by GFP
flags. This guarantees, a task does not miss SIGKILL
from OOM killer.
Signed-off-by: Kirill Tkhai <ktkhai@virtuozzo.com>
Signed-off-by: Tejun Heo <tj@kernel.org>

microblaze build broke due to missing declaration of the
cond_resched() invocation added recently.  Let's include linux/sched.h
explicitly.
Signed-off-by: Tejun Heo <tj@kernel.org>
Reported-by: kbuild test robot <fengguang.wu@intel.com>

When commit 9c7be59f ("libata: Apply NOLPM quirk to Crucial MX100
512GB SSDs") was added it inherited the ATA_HORKAGE_NO_NCQ_TRIM quirk
from the existing "Crucial_CT*MX100*" entry, but that entry sets model_rev
to "MU01", where as the entry adding the NOLPM quirk sets it to NULL.

This means that after this commit we no apply the NO_NCQ_TRIM quirk to
all "Crucial_CT512MX100*" SSDs even if they have the fixed "MU02"
firmware. This commit splits the "Crucial_CT512MX100*" quirk into 2
quirks, one for the "MU01" firmware and one for all other firmware
versions, so that we once again only apply the NO_NCQ_TRIM quirk to the
"MU01" firmware version.

Fixes: 9c7be59f ("libata: Apply NOLPM quirk to ... MX100 512GB SSDs")
Cc: stable@vger.kernel.org
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Tejun Heo <tj@kernel.org>

Commit b17e5729 ("libata: disable LPM for Crucial BX100 SSD 500GB
drive"), introduced a ATA_HORKAGE_NOLPM quirk for Crucial BX100 500GB SSDs
but limited this to the MU02 firmware version, according to:
http://www.crucial.com/usa/en/support-ssd-firmware

MU02 is the last version, so there are no newer possibly fixed versions
and if the MU02 version has broken LPM then the MU01 almost certainly
also has broken LPM, so this commit changes the quirk to apply to all
firmware versions.

Fixes: b17e5729 ("libata: disable LPM for Crucial BX100 SSD 500GB...")
Cc: stable@vger.kernel.org
Cc: Kai-Heng Feng <kai.heng.feng@canonical.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Tejun Heo <tj@kernel.org>

There have been reports of the Crucial M500 480GB model not working
with LPM set to min_power / med_power_with_dipm level.

It has not been tested with medium_power, but that typically has no
measurable power-savings.

Note the reporters Crucial_CT480M500SSD3 has a firmware version of MU03
and there is a MU05 update available, but that update does not mention any
LPM fixes in its changelog, so the quirk matches all firmware versions.

In my experience the LPM problems with (older) Crucial SSDs seem to be
limited to higher capacity versions of the SSDs (different firmware?),
so this commit adds a NOLPM quirk for the 480 and 960GB versions of the
M500, to avoid LPM causing issues with these SSDs.

Cc: stable@vger.kernel.org
Reported-and-tested-by: Martin Steigerwald <martin@lichtvoll.de>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Tejun Heo <tj@kernel.org>

Pull x86/pti updates from Thomas Gleixner:
 "Another set of melted spectrum updates:

   - Iron out the last late microcode loading issues by actually
     checking whether new microcode is present and preventing the CPU
     synchronization to run into a timeout induced hang.

   - Remove Skylake C2 from the microcode blacklist according to the
     latest Intel documentation

   - Fix the VM86 POPF emulation which traps if VIP is set, but VIF is
     not. Enhance the selftests to catch that kind of issue

   - Annotate indirect calls/jumps for objtool on 32bit. This is not a
     functional issue, but for consistency sake its the right thing to
     do.

   - Fix a jump label build warning observed on SPARC64 which uses 32bit
     storage for the code location which is casted to 64 bit pointer w/o
     extending it to 64bit first.

   - Add two new cpufeature bits. Not really an urgent issue, but
     provides them for both x86 and x86/kvm work. No impact on the
     current kernel"

* 'x86-pti-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/microcode: Fix CPU synchronization routine
  x86/microcode: Attempt late loading only when new microcode is present
  x86/speculation: Remove Skylake C2 from Speculation Control microcode blacklist
  jump_label: Fix sparc64 warning
  x86/speculation, objtool: Annotate indirect calls/jumps for objtool on 32-bit kernels
  x86/vm86/32: Fix POPF emulation
  selftests/x86/entry_from_vm86: Add test cases for POPF
  selftests/x86/entry_from_vm86: Exit with 1 if we fail
  x86/cpufeatures: Add Intel PCONFIG cpufeature
  x86/cpufeatures: Add Intel Total Memory Encryption cpufeature

Pull x86 fix from Thomas Gleixner:
 "A single fix for vmalloc_fault() which uses p*d_huge() unconditionally
  whether CONFIG_HUGETLBFS is set or not. In case of CONFIG_HUGETLBFS=n
  this results in a crash as p*d_huge() returns 0 in that case"

* 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/mm: Fix vmalloc_fault to use pXd_large

Pull irq fixes from Thomas Gleixner:
 "Three fixes for irq chip drivers:

   - Make sure the allocations in the GIC-V3 ITS driver are large enough
     to accomodate the interrupt space

   - Fix a misplaced __iomem annotation which causes a splat of 26
     sparse warnings

   - Remove an unused function in the IMX GPCV2 driver which causes
     build warnings"

* 'irq-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  irqchip/irq-imx-gpcv2: Remove unused function
  irqchip/gic-v3-its: Ensure nr_ites >= nr_lpis
  irqchip/gic-v3-its: Fix misplaced __iomem annotations

Pull EFI fix from Thomas Gleixner:
 "A single fix to prevent partially initialized pointers in mixed mode
  (64bit kernel on 32bit UEFI)"

* 'efi-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  efi/libstub/tpm: Initialize pointer variables to zero for mixed mode

Pull KVM fixes from Paolo Bonzini:
 "PPC:
   - fix bug leading to lost IPIs and smp_call_function_many() lockups
     on POWER9

  ARM:
   - locking fix
   - reset fix
   - GICv2 multi-source SGI injection fix
   - GICv2-on-v3 MMIO synchronization fix
   - make the console less verbose.

  x86:
   - fix device passthrough on AMD SME"

* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
  KVM: x86: Fix device passthrough when SME is active
  kvm: arm/arm64: vgic-v3: Tighten synchronization for guests using v2 on v3
  KVM: arm/arm64: vgic: Don't populate multiple LRs with the same vintid
  KVM: arm/arm64: Reduce verbosity of KVM init log
  KVM: arm/arm64: Reset mapped IRQs on VM reset
  KVM: arm/arm64: Avoid vcpu_load for other vcpu ioctls than KVM_RUN
  KVM: arm/arm64: vgic: Add missing irq_lock to vgic_mmio_read_pending
  KVM: PPC: Book3S HV: Fix trap number return from __kvmppc_vcore_entry

Just when I had decided that flush_cache_range() was always called with
a valid context, Helge reported two cases where the
"BUG_ON(!vma->vm_mm->context);" was hit on the phantom buildd:

 kernel BUG at /mnt/sdb6/linux/linux-4.15.4/arch/parisc/kernel/cache.c:587!
 CPU: 1 PID: 3254 Comm: kworker/1:2 Tainted: G D 4.15.0-1-parisc64-smp #1 Debian 4.15.4-1+b1
 Workqueue: events free_ioctx
  IAOQ[0]: flush_cache_range+0x164/0x168
  IAOQ[1]: flush_cache_page+0x0/0x1c8
  RP(r2): unmap_page_range+0xae8/0xb88
 Backtrace:
  [<00000000404a6980>] unmap_page_range+0xae8/0xb88
  [<00000000404a6ae0>] unmap_single_vma+0xc0/0x188
  [<00000000404a6cdc>] zap_page_range_single+0x134/0x1f8
  [<00000000404a702c>] unmap_mapping_range+0x1cc/0x208
  [<0000000040461518>] truncate_pagecache+0x98/0x108
  [<0000000040461624>] truncate_setsize+0x9c/0xb8
  [<00000000405d7f30>] put_aio_ring_file+0x80/0x100
  [<00000000405d803c>] aio_free_ring+0x8c/0x290
  [<00000000405d82c0>] free_ioctx+0x80/0x180
  [<0000000040284e6c>] process_one_work+0x21c/0x668
  [<00000000402854c4>] worker_thread+0x20c/0x778
  [<0000000040291d44>] kthread+0x2d4/0x2e0
  [<0000000040204020>] end_fault_vector+0x20/0xc0

This indicates that we need to handle the no context case in
flush_cache_range() as we do in flush_cache_mm().

In thinking about this, I realized that we don't need to flush the TLB
when there is no context.  So, I added context checks to the large flush
cases in flush_cache_mm() and flush_cache_range().  The large flush case
occurs frequently in flush_cache_mm() and the change should improve fork
performance.

The v2 version of this change removes the BUG_ON from flush_cache_page()
by skipping the TLB flush when there is no context.  I also added code
to flush the TLB in flush_cache_mm() and flush_cache_range() when we
have a context that's not current.  Now all three routines handle TLB
flushes in a similar manner.
Signed-off-by: John David Anglin <dave.anglin@bell.net>
Cc: stable@vger.kernel.org # 4.9+
Signed-off-by: Helge Deller <deller@gmx.de>

Pull btrfs fixes from David Sterba:
 "There's an important revert in this pull request that needs to go to
  stable as it causes a corruption on big endian machines.

  The other fix is for FIEMAP incorrectly reporting shared extents
  before a sync and one fix for a crash in raid56.

  So far we got only one report about the BE corruption, the stable
  kernels were out for like a week, so hopefully the scope of the damage
  is low"

* tag 'for-4.16-rc5-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux:
  Revert "btrfs: use proper endianness accessors for super_copy"
  btrfs: add missing initialization in btrfs_check_shared
  btrfs: Fix NULL pointer exception in find_bio_stripe

Pull microblaze fixes from Michal Simek:

 - Use NO_BOOTMEM to fix boot issue

 - Fix opt lib endian dependencies

* tag 'microblaze-4.16-rc6' of git://git.monstr.eu/linux-2.6-microblaze:
  microblaze: switch to NO_BOOTMEM
  microblaze: remove unused alloc_maybe_bootmem
  microblaze: Setup dependencies for ASM optimized lib functions

Emanuel reported an issue with a hang during microcode update because my
dumb idea to use one atomic synchronization variable for both rendezvous
- before and after update - was simply bollocks:

  microcode: microcode_reload_late: late_cpus: 4
  microcode: __reload_late: cpu 2 entered
  microcode: __reload_late: cpu 1 entered
  microcode: __reload_late: cpu 3 entered
  microcode: __reload_late: cpu 0 entered
  microcode: __reload_late: cpu 1 left
  microcode: Timeout while waiting for CPUs rendezvous, remaining: 1

CPU1 above would finish, leave and the others will still spin waiting for
it to join.

So do two synchronization atomics instead, which makes the code a lot more
straightforward.

Also, since the update is serialized and it also takes quite some time per
microcode engine, increase the exit timeout by the number of CPUs on the
system.

That's ok because the moment all CPUs are done, that timeout will be cut
short.

Furthermore, panic when some of the CPUs timeout when returning from a
microcode update: we can't allow a system with not all cores updated.

Also, as an optimization, do not do the exit sync if microcode wasn't
updated.
Reported-by: Emanuel Czirai <xftroxgpx@protonmail.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Emanuel Czirai <xftroxgpx@protonmail.com>
Tested-by: Ashok Raj <ashok.raj@intel.com>
Tested-by: Tom Lendacky <thomas.lendacky@amd.com>
Link: https://lkml.kernel.org/r/20180314183615.17629-2-bp@alien8.de

Return UCODE_NEW from the scanning functions to denote that new microcode
was found and only then attempt the expensive synchronization dance.
Reported-by: Emanuel Czirai <xftroxgpx@protonmail.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Emanuel Czirai <xftroxgpx@protonmail.com>
Tested-by: Ashok Raj <ashok.raj@intel.com>
Tested-by: Tom Lendacky <thomas.lendacky@amd.com>
Link: https://lkml.kernel.org/r/20180314183615.17629-1-bp@alien8.de

Pull drm fixes from Dave Airlie:
 "i915, amd and nouveau fixes.

  i915:
   - backlight fix for some panels
   - pm fix
   - fencing fix
   - some GVT fixes

  amdgpu:
   - backlight fix across suspend/resume
   - object destruction ordering issue fix
   - displayport fix

  nouveau:
   - two backlight fixes
   - fix for some lockups

  Pretty quiet week, seems like everyone was fixing backlights"

* tag 'drm-fixes-for-v4.16-rc6' of git://people.freedesktop.org/~airlied/linux:
  drm/nouveau/bl: fix backlight regression
  drm/nouveau/bl: Fix oops on driver unbind
  drm/nouveau/mmu: ALIGN_DOWN correct variable
  drm/i915/gvt: fix user copy warning by whitelist workload rb_tail field
  drm/i915/gvt: Correct the privilege shadow batch buffer address
  drm/amdgpu/dce: Don't turn off DP sink when disconnected
  drm/amdgpu: save/restore backlight level in legacy dce code
  drm/radeon: fix prime teardown order
  drm/amdgpu: fix prime teardown order
  drm/i915: Kick the rps worker when changing the boost frequency
  drm/i915: Only prune fences after wait-for-all
  drm/i915: Enable VBT based BL control for DP
  drm/i915/gvt: keep oa config in shadow ctx
  drm/i915/gvt: Add runtime_pm_get/put into gvt_switch_mmio

This reverts commit 3c181c12.

The offending patch was merged in 4.16-rc4 and was promptly applied to
stable kernels 4.14.25 and 4.15.8.

The patch causes a corruption in several superblock items on big-endian
machines because of messed up endianity conversions. The damage is
manually repairable. A filesystem cannot be mounted again after it has
been unmounted once.

We do a full revert and not a fixup so stable can pick that patch ASAP.

Fixes: 3c181c12 ("btrfs: use proper endianness accessors for super_copy")
Link: https://lkml.kernel.org/r/1521139304@msgid.manchmal.in-ulm.de
CC: stable@vger.kernel.org # 4.14+
Reported-by: Christoph Biedl <linux-kernel.bfrz@manchmal.in-ulm.de>
Signed-off-by: David Sterba <dsterba@suse.com>

When using device passthrough with SME active, the MMIO range that is
mapped for the device should not be mapped encrypted.  Add a check in
set_spte() to insure that a page is not mapped encrypted if that page
is a device MMIO page as indicated by kvm_is_mmio_pfn().

Cc: <stable@vger.kernel.org> # 4.14.x-
Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

Microblaze doesn't set CONFIG_NO_BOOTMEM and so memblock_virt_alloc()
doesn't work for CONFIG_HAVE_MEMBLOCK && !CONFIG_NO_BOOTMEM.

Similar change was already done by others architectures
"ARM: mm: Remove bootmem code and switch to NO_BOOTMEM"
(sha1: 84f452b1)
or
"openrisc: Consolidate setup to use memblock instead of bootmem"
(sha1: 266c7fad)
or
"parisc: Drop bootmem and switch to memblock"
(sha1: 4fe9e1d9)
or
"powerpc: Remove bootmem allocator"
(sha1: 10239733)
or
"s390/mm: Convert bootmem to memblock"
(sha1: 50be6345)
or
"sparc64: Convert over to NO_BOOTMEM."
(sha1: 625d693e)
or
"xtensa: drop sysmem and switch to memblock"
(sha1: 0e46c111)

Issue was introduced by:
"of/fdt: use memblock_virt_alloc for early alloc"
(sha1: 0fa1c579)
Signed-off-by: Rob Herring <robh@kernel.org>
Tested-by: Alvaro Gamez Machado <alvaro.gamez@hazent.com>
Tested-by: Michal Simek <michal.simek@xilinx.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>

alloc_maybe_bootmem is unused, so remove it.
Signed-off-by: Rob Herring <robh@kernel.org>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>

The patch:
"microblaze: Setup proper dependency for optimized lib functions"
(sha1: 7b6ce52b)
didn't setup all dependencies properly.
Optimized lib functions in C are also present for little endian
and optimized library functions in assembler are implemented only for
big endian version.
Reported-by: kbuild test robot <fengguang.wu@intel.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>

In accordance with Intel's microcode revision guidance from March 6 MCU
rev 0xc2 is cleared on both Skylake H/S and Skylake Xeon E3 processors
that share CPUID 506E3.
Signed-off-by: Alexander Sergeyev <sergeev917@gmail.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Jia Zhang <qianyue.zj@alibaba-inc.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Kyle Huey <me@kylehuey.com>
Cc: David Woodhouse <dwmw@amazon.co.uk>
Link: https://lkml.kernel.org/r/20180313193856.GA8580@localhost.localdomain

Merge tag 'drm-intel-fixes-2018-03-15' of git://anongit.freedesktop.org/drm/drm-intel into drm-fixes

Only GVT fixes:
- Two warnings fix for runtime pm and usr copy (Xiong, Zhenyu)
- OA context fix for vGPU profiling (Min)
- privilege batch buffer reloc fix (Fred)

* tag 'drm-intel-fixes-2018-03-15' of git://anongit.freedesktop.org/drm/drm-intel:
  drm/i915/gvt: fix user copy warning by whitelist workload rb_tail field
  drm/i915/gvt: Correct the privilege shadow batch buffer address
  drm/i915/gvt: keep oa config in shadow ctx
  drm/i915/gvt: Add runtime_pm_get/put into gvt_switch_mmio

nouveau regression fixes.

* 'linux-4.16' of git://github.com/skeggsb/linux:
  drm/nouveau/bl: fix backlight regression
  drm/nouveau/bl: Fix oops on driver unbind
  drm/nouveau/mmu: ALIGN_DOWN correct variable

Pull vfs fixes from Al Viro:

 - backport-friendly part of lock_parent() race fix

 - a fix for an assumption in the heurisic used by path_connected() that
   is not true on NFS

 - livelock fixes for d_alloc_parallel()

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
  fs: Teach path_connected to handle nfs filesystems with multiple roots.
  fs: dcache: Use READ_ONCE when accessing i_dir_seq
  fs: dcache: Avoid livelock between d_alloc_parallel and __d_add
  lock_parent() needs to recheck if dentry got __dentry_kill'ed under it

Fixes: 3c66c87d ("drm/nouveau/disp: remove hw-specific customisation
of output paths")
Suggested-by: Ben Skeggs <skeggsb@redhat.com>
Signed-off-by: Karol Herbst <kherbst@redhat.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>

Unbinding nouveau on a dual GPU MacBook Pro oopses because we iterate
over the bl_connectors list in nouveau_backlight_exit() but skipped
initializing it in nouveau_backlight_init().  Stacktrace for posterity:

    BUG: unable to handle kernel NULL pointer dereference at 0000000000000010
    IP: nouveau_backlight_exit+0x2b/0x70 [nouveau]
    nouveau_display_destroy+0x29/0x80 [nouveau]
    nouveau_drm_unload+0x65/0xe0 [nouveau]
    drm_dev_unregister+0x3c/0xe0 [drm]
    drm_put_dev+0x2e/0x60 [drm]
    nouveau_drm_device_remove+0x47/0x70 [nouveau]
    pci_device_remove+0x36/0xb0
    device_release_driver_internal+0x157/0x220
    driver_detach+0x39/0x70
    bus_remove_driver+0x51/0xd0
    pci_unregister_driver+0x2a/0xa0
    nouveau_drm_exit+0x15/0xfb0 [nouveau]
    SyS_delete_module+0x18c/0x290
    system_call_fast_compare_end+0xc/0x6f

Fixes: b53ac1ee ("drm/nouveau/bl: Do not register interface if Apple GMUX detected")
Cc: stable@vger.kernel.org # v4.10+
Cc: Pierre Moreau <pierre.morrow@free.fr>
Signed-off-by: Lukas Wunner <lukas@wunner.de>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>

Commit 7110c89bb8852ff8b0f88ce05b332b3fe22bd11e ("mmu: swap out round
for ALIGN") replaced two calls to round/rounddown with ALIGN/ALIGN_DOWN,
but erroneously applied ALIGN_DOWN to a different variable (addr) and left
intended variable (tail) not rounded/ALIGNed.

As a result screen corruption, X lockups are observable. An example of kernel
log of affected system with NV98 card where it was bisected:

nouveau 0000:01:00.0: gr: TRAP_M2MF 00000002 [IN]
nouveau 0000:01:00.0: gr: TRAP_M2MF 00320951 400007c0 00000000 04000000
nouveau 0000:01:00.0: gr: 00200000 [] ch 1 [000fbbe000 DRM] subc 4 class 5039
mthd 0100 data 00000000
nouveau 0000:01:00.0: fb: trapped read at 0040000000 on channel 1
[0fbbe000 DRM]
engine 00 [PGRAPH] client 03 [DISPATCH] subclient 04 [M2M_IN] reason 00000006
[NULL_DMAOBJ]

Fixes bug 105173 ("[MCP79][Regression] Unhandled NULL pointer dereference in
nvkm_object_unmap since kernel 4.15")
https://bugs.freedesktop.org/show_bug.cgi?id=105173

Fixes: 7110c89bb885 ("mmu: swap out round for ALIGN ")
Tested-by: Pierre Moreau <pierre.morrow@free.fr>
Reviewed-by: Pierre Moreau <pierre.morrow@free.fr>
Signed-off-by: Maris Nartiss <maris.nartiss@gmail.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Cc: stable@vger.kernel.org # v4.15+

On nfsv2 and nfsv3 the nfs server can export subsets of the same
filesystem and report the same filesystem identifier, so that the nfs
client can know they are the same filesystem.  The subsets can be from
disjoint directory trees.  The nfsv2 and nfsv3 filesystems provides no
way to find the common root of all directory trees exported form the
server with the same filesystem identifier.

The practical result is that in struct super s_root for nfs s_root is
not necessarily the root of the filesystem.  The nfs mount code sets
s_root to the root of the first subset of the nfs filesystem that the
kernel mounts.

This effects the dcache invalidation code in generic_shutdown_super
currently called shrunk_dcache_for_umount and that code for years
has gone through an additional list of dentries that might be dentry
trees that need to be freed to accomodate nfs.

When I wrote path_connected I did not realize nfs was so special, and
it's hueristic for avoiding calling is_subdir can fail.

The practical case where this fails is when there is a move of a
directory from the subtree exposed by one nfs mount to the subtree
exposed by another nfs mount.  This move can happen either locally or
remotely.  With the remote case requiring that the move directory be cached
before the move and that after the move someone walks the path
to where the move directory now exists and in so doing causes the
already cached directory to be moved in the dcache through the magic
of d_splice_alias.

If someone whose working directory is in the move directory or a
subdirectory and now starts calling .. from the initial mount of nfs
(where s_root == mnt_root), then path_connected as a heuristic will
not bother with the is_subdir check.  As s_root really is not the root
of the nfs filesystem this heuristic is wrong, and the path may
actually not be connected and path_connected can fail.

The is_subdir function might be cheap enough that we can call it
unconditionally.  Verifying that will take some benchmarking and
the result may not be the same on all kernels this fix needs
to be backported to.  So I am avoiding that for now.

Filesystems with snapshots such as nilfs and btrfs do something
similar.  But as the directory tree of the snapshots are disjoint
from one another and from the main directory tree rename won't move
things between them and this problem will not occur.

Cc: stable@vger.kernel.org
Reported-by: Al Viro <viro@ZenIV.linux.org.uk>
Fixes: 397d425d ("vfs: Test for and handle paths that are unreachable from their mnt_root")
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>

gvt-fixes-2018-03-15

- Two warnings fix for runtime pm and usr copy (Xiong, Zhenyu)
- OA context fix for vGPU profiling (Min)
- privilege batch buffer reloc fix (Fred)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180315100023.5n5a74afky6qinoh@zhen-hp.sh.intel.com

pmdp_invalidate() was changed to update the pmd atomically
(to not lose dirty/access bits) and return the original pmd
value.

However, in doing so, we lost a lot of the essential work that
set_pmd_at() does, namely to update hugepage mapping counts and
queuing up the batched TLB flush entry.

Thus we were not flushing entries out of the TLB when making
such PMD changes.

Fix this by abstracting the accounting work of set_pmd_at() out into a
separate function, and call it from pmdp_establish().

Fixes: a8e654f0 ("sparc64: update pmdp_invalidate() to return old pmd value")
Signed-off-by: David S. Miller <davem@davemloft.net>

Merge tag 'kvm-ppc-fixes-4.16-2' of git://git.kernel.org/pub/scm/linux/kernel/git/paulus/powerpc into kvm-master

Fix for PPC KVM for 4.16

- Fix bug leading to lost IPIs on POWER9 and hence to other CPUs reporting
  lockups in smp_call_function_many().

Merge tag 'kvm-arm-fixes-for-v4.16-2' of git://git.kernel.org/pub/scm/linux/kernel/git/kvmarm/kvmarm into kvm-master

kvm/arm fixes for 4.16, take 2

- Peace of mind locking fix in vgic_mmio_read_pending
- Allow hw-mapped interrupts to be reset when the VM resets
- Fix GICv2 multi-source SGI injection
- Fix MMIO synchronization for GICv2 on v3 emulation
- Remove excess verbosity on the console