- 09 May, 2016 8 commits
-
-
Jasem Mutlaq authored
commit 613ac23a upstream. Adding VID:PID for Straizona Focusers to cp210x driver. Signed-off-by:
Jasem Mutlaq <mutlaqja@ikarustech.com> Signed-off-by:
Johan Hovold <johan@kernel.org> Signed-off-by:
Kamal Mostafa <kamal@canonical.com>
-
Mike Manning authored
commit 1d377f4d upstream. The Link ECU is an aftermarket ECU computer for vehicles that provides full tuning abilities as well as datalogging and displaying capabilities via the USB to Serial adapter built into the device. Signed-off-by:
Mike Manning <michael@bsch.com.au> Signed-off-by:
-
Laszlo Ersek authored
commit 630ba0cc upstream. The variable_matches() function can currently read "var_name[len]", for example when: - var_name[0] == 'a', - len == 1 - match_name points to the NUL-terminated string "ab". This function is supposed to accept "var_name" inputs that are not NUL-terminated (hence the "len" parameter"). Document the function, and access "var_name[*match]" only if "*match" is smaller than "len". Reported-by:
Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by:
Laszlo Ersek <lersek@redhat.com> Cc: Peter Jones <pjones@redhat.com> Cc: Matthew Garrett <mjg59@coreos.com> Cc: Jason Andryuk <jandryuk@gmail.com> Cc: Jani Nikula <jani.nikula@linux.intel.com> Link: http://thread.gmane.org/gmane.comp.freedesktop.xorg.drivers.intel/86906Signed-off-by:
Matt Fleming <matt@codeblueprint.co.uk> Signed-off-by:
-
Javier Martinez Canillas authored
commit 10ff4c52 upstream. The exynos5 I2C controller driver always prepares and enables a clock before using it and then disables unprepares it when the clock is not used anymore. But this can cause a possible ABBA deadlock in some scenarios since a driver that uses regmap to access its I2C registers, will first grab the regmap lock and then the I2C xfer function will grab the prepare lock when preparing the I2C clock. But since the clock driver also uses regmap for I2C accesses, preparing a clock will first grab the prepare lock and then the regmap lock when using the regmap API. An example of this happens on the Exynos5422 Odroid XU4 board where a s2mps11 PMIC is used and both the s2mps11 regulators and clk drivers share the same I2C regmap. The possible deadlock is reported by the kernel lockdep: Possible unsafe locking scenario: CPU0 CPU1 ---- ---- lock(sec_core:428:(regmap)->lock); lock(prepare_lock); lock(sec_core:428:(regmap)->lock); lock(prepare_lock); *** DEADLOCK *** Fix it by leaving the code prepared on probe and use {en,dis}able in the I2C transfer function. This patch is similar to commit 34e81ad5 ("i2c: s3c2410: fix ABBA deadlock by keeping clock prepared") that fixes the same bug in other driver for an I2C controller found in Samsung SoCs. Reported-by:
Anand Moon <linux.amoon@gmail.com> Signed-off-by:
Javier Martinez Canillas <javier@osg.samsung.com> Reviewed-by:
Krzysztof Kozlowski <k.kozlowski@samsung.com> Signed-off-by:
Wolfram Sang <wsa@the-dreams.de> Signed-off-by:
-
Michael Ellerman authored
commit 609d5a1b upstream. Since commit ea8daa7b ("kbuild: Add option to turn incompatible pointer check into error"), assignments from an incompatible pointer types have become a hard error, eg: drivers/i2c/busses/i2c-cpm.c:545:91: error: passing argument 3 of 'dma_alloc_coherent' from incompatible pointer type Fix the build break by converting txdma & rxdma to dma_addr_t. Signed-off-by:
Michael Ellerman <mpe@ellerman.id.au> Signed-off-by:
-
Krzysztof Kozlowski authored
commit 07d2390e upstream. In certain probe conditions the interrupt came right after registering the handler causing a NULL pointer exception because of uninitialized waitqueue: $ udevadm trigger i2c-gpio i2c-gpio-1: using pins 143 (SDA) and 144 (SCL) i2c-gpio i2c-gpio-3: using pins 53 (SDA) and 52 (SCL) Unable to handle kernel NULL pointer dereference at virtual address 00000000 pgd = e8b38000 [00000000] *pgd=00000000 Internal error: Oops: 5 [#1] SMP ARM Modules linked in: snd_soc_i2s(+) i2c_gpio(+) snd_soc_idma snd_soc_s3c_dma snd_soc_core snd_pcm_dmaengine snd_pcm snd_timer snd soundcore ac97_bus spi_s3c64xx pwm_samsung dwc2 exynos_adc phy_exynos_usb2 exynosdrm exynos_rng rng_core rtc_s3c CPU: 0 PID: 717 Comm: data-provider-m Not tainted 4.6.0-rc1-next-20160401-00011-g1b8d87473b9e-dirty #101 Hardware name: SAMSUNG EXYNOS (Flattened Device Tree) (...) (__wake_up_common) from [<c0379624>] (__wake_up+0x38/0x4c) (__wake_up) from [<c0a41d30>] (ak8975_irq_handler+0x28/0x30) (ak8975_irq_handler) from [<c0386720>] (handle_irq_event_percpu+0x88/0x140) (handle_irq_event_percpu) from [<c038681c>] (handle_irq_event+0x44/0x68) (handle_irq_event) from [<c0389c40>] (handle_edge_irq+0xf0/0x19c) (handle_edge_irq) from [<c0385e04>] (generic_handle_irq+0x24/0x34) (generic_handle_irq) from [<c05ee360>] (exynos_eint_gpio_irq+0x50/0x68) (exynos_eint_gpio_irq) from [<c0386720>] (handle_irq_event_percpu+0x88/0x140) (handle_irq_event_percpu) from [<c038681c>] (handle_irq_event+0x44/0x68) (handle_irq_event) from [<c0389a70>] (handle_fasteoi_irq+0xb4/0x194) (handle_fasteoi_irq) from [<c0385e04>] (generic_handle_irq+0x24/0x34) (generic_handle_irq) from [<c03860b4>] (__handle_domain_irq+0x5c/0xb4) (__handle_domain_irq) from [<c0301774>] (gic_handle_irq+0x54/0x94) (gic_handle_irq) from [<c030c910>] (__irq_usr+0x50/0x80) The bug was reproduced on exynos4412-trats2 (with a max77693 device also using i2c-gpio) after building max77693 as a module. Fixes: 94a6d5cf ("iio:ak8975 Implement data ready interrupt handling") Signed-off-by:
Gregor Boirie <gregor.boirie@parrot.com> Signed-off-by:
Jonathan Cameron <jic23@kernel.org> Signed-off-by:
-
Mark Brown authored
commit 47325078 upstream. The dummy component is reused for all cards so we special case and don't bind it to any of them. This means that code like that displaying the component widgets that tries to look at the card will crash. In the future we will fix this by ensuring that the dummy component looks like other components but that is invasive and so not suitable for a fix. Instead add a special case check here. Reported-by:
Harry Pan <harry.pan@intel.com> Suggested-by:
Lars-Peter Clausen <lars@metafoo.de> Signed-off-by:
Mark Brown <broonie@kernel.org> [ kamal: backport to 4.2-stable ] Signed-off-by:
-
Sugar Zhang authored
commit 653aa464 upstream. this patch corrects the interface adc/dac control register definition according to datasheet. Signed-off-by:
Sugar Zhang <sugar.zhang@rock-chips.com> Signed-off-by:
-
- 04 May, 2016 13 commits
-
-
Hector Marco-Gisbert authored
commit 8b8addf8 upstream. Currently on i386 and on X86_64 when emulating X86_32 in legacy mode, only the stack and the executable are randomized but not other mmapped files (libraries, vDSO, etc.). This patch enables randomization for the libraries, vDSO and mmap requests on i386 and in X86_32 in legacy mode. By default on i386 there are 8 bits for the randomization of the libraries, vDSO and mmaps which only uses 1MB of VA. This patch preserves the original randomness, using 1MB of VA out of 3GB or 4GB. We think that 1MB out of 3GB is not a big cost for having the ASLR. The first obvious security benefit is that all objects are randomized (not only the stack and the executable) in legacy mode which highly increases the ASLR effectiveness, otherwise the attackers may use these non-randomized areas. But also sensitive setuid/setgid applications are more secure because currently, attackers can disable the randomization of these applications by setting the ulimit stack to "unlimited". This is a very old and widely known trick to disable the ASLR in i386 which has been allowed for too long. Another trick used to disable the ASLR was to set the ADDR_NO_RANDOMIZE personality flag, but fortunately this doesn't work on setuid/setgid applications because there is security checks which clear Security-relevant flags. This patch always randomizes the mmap_legacy_base address, removing the possibility to disable the ASLR by setting the stack to "unlimited". Signed-off-by:
Hector Marco-Gisbert <hecmargi@upv.es> Acked-by:
Ismael Ripoll Ripoll <iripoll@upv.es> Acked-by:
Kees Cook <keescook@chromium.org> Acked-by:
Arjan van de Ven <arjan@linux.intel.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: akpm@linux-foundation.org Cc: kees Cook <keescook@chromium.org> Link: http://lkml.kernel.org/r/1457639460-5242-1-git-send-email-hecmargi@upv.esSigned-off-by:
Ingo Molnar <mingo@kernel.org> Reference: CVE-2016-3672 Signed-off-by:
-
Kees Cook authored
commit 204db6ed upstream. The arch_randomize_brk() function is used on several architectures, even those that don't support ET_DYN ASLR. To avoid bulky extern/#define tricks, consolidate the support under CONFIG_ARCH_HAS_ELF_RANDOMIZE for the architectures that support it, while still handling CONFIG_COMPAT_BRK. Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by:
-
Kees Cook authored
commit d1fd836d upstream. This fixes the "offset2lib" weakness in ASLR for arm, arm64, mips, powerpc, and x86. The problem is that if there is a leak of ASLR from the executable (ET_DYN), it means a leak of shared library offset as well (mmap), and vice versa. Further details and a PoC of this attack is available here: http://cybersecurity.upv.es/attacks/offset2lib/offset2lib.html With this patch, a PIE linked executable (ET_DYN) has its own ASLR region: $ ./show_mmaps_pie 54859ccd6000-54859ccd7000 r-xp ... /tmp/show_mmaps_pie 54859ced6000-54859ced7000 r--p ... /tmp/show_mmaps_pie 54859ced7000-54859ced8000 rw-p ... /tmp/show_mmaps_pie 7f75be764000-7f75be91f000 r-xp ... /lib/x86_64-linux-gnu/libc.so.6 7f75be91f000-7f75beb1f000 ---p ... /lib/x86_64-linux-gnu/libc.so.6 7f75beb1f000-7f75beb23000 r--p ... /lib/x86_64-linux-gnu/libc.so.6 7f75beb23000-7f75beb25000 rw-p ... /lib/x86_64-linux-gnu/libc.so.6 7f75beb25000-7f75beb2a000 rw-p ... 7f75beb2a000-7f75beb4d000 r-xp ... /lib64/ld-linux-x86-64.so.2 7f75bed45000-7f75bed46000 rw-p ... 7f75bed46000-7f75bed47000 r-xp ... 7f75bed47000-7f75bed4c000 rw-p ... 7f75bed4c000-7f75bed4d000 r--p ... /lib64/ld-linux-x86-64.so.2 7f75bed4d000-7f75bed4e000 rw-p ... /lib64/ld-linux-x86-64.so.2 7f75bed4e000-7f75bed4f000 rw-p ... 7fffb3741000-7fffb3762000 rw-p ... [stack] 7fffb377b000-7fffb377d000 r--p ... [vvar] 7fffb377d000-7fffb377f000 r-xp ... [vdso] The change is to add a call the newly created arch_mmap_rnd() into the ELF loader for handling ET_DYN ASLR in a separate region from mmap ASLR, as was already done on s390. Removes CONFIG_BINFMT_ELF_RANDOMIZE_PIE, which is no longer needed. Signed-off-by:
-
Kees Cook authored
commit c6f5b001 upstream. In preparation for moving ET_DYN randomization into the ELF loader (which requires a static ELF_ET_DYN_BASE), this redefines s390's existing ET_DYN randomization in a call to arch_mmap_rnd(). This refactoring results in the same ET_DYN randomization on s390. Signed-off-by:
Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Reviewed-by:
-
Kees Cook authored
commit 2b68f6ca upstream. When an architecture fully supports randomizing the ELF load location, a per-arch mmap_rnd() function is used to find a randomized mmap base. In preparation for randomizing the location of ET_DYN binaries separately from mmap, this renames and exports these functions as arch_mmap_rnd(). Additionally introduces CONFIG_ARCH_HAS_ELF_RANDOMIZE for describing this feature on architectures that support it (which is a superset of ARCH_BINFMT_ELF_RANDOMIZE_PIE, since s390 already supports a separated ET_DYN ASLR from mmap ASLR without the ARCH_BINFMT_ELF_RANDOMIZE_PIE logic). Signed-off-by:
-
Kees Cook authored
commit 8e89a356 upstream. In preparation for splitting out ET_DYN ASLR, this refactors the use of mmap_rnd() to be used similarly to arm and x86, and extracts the checking of PF_RANDOMIZE. Signed-off-by:
-
Martin Schwidefsky authored
commit 4ba2815d upstream. The base address (STACK_TOP / 3 * 2) for a 64-bit program is two thirds into the 4GB segment at 0x2aa00000000. The randomization added on z13 can eat another 1GB of the remaining 1.33GB to the next 4GB boundary. In the worst case 300MB are left for the executable + bss which may cross into the next 4GB segment. This is bad for branch prediction, therefore align the base address to 4GB to give the program more room before it crosses the 4GB boundary. Signed-off-by:
-
Martin Schwidefsky authored
commit 1f6b83e5 upstream. Avoid cache aliasing on z13 by aligning shared objects to multiples of 512K. The virtual addresses of a page from a shared file needs to have identical bits in the range 2^12 to 2^18. Signed-off-by:
-
Kees Cook authored
commit ed632274 upstream. In preparation for splitting out ET_DYN ASLR, this refactors the use of mmap_rnd() to be used similarly to arm and x86. (Can mmap ASLR be safely enabled in the legacy mmap case here? Other archs use "mm->mmap_base = TASK_UNMAPPED_BASE + random_factor".) Signed-off-by:
-
Kees Cook authored
commit 1f0569df upstream. In preparation for splitting out ET_DYN ASLR, extract the mmap ASLR selection into a separate function. Signed-off-by:
-
Kees Cook authored
commit dd04cff1 upstream. In preparation for splitting out ET_DYN ASLR, this refactors the use of mmap_rnd() to be used similarly to arm and x86. This additionally enables mmap ASLR on legacy mmap layouts, which appeared to be missing on arm64, and was already supported on arm. Additionally removes a copy/pasted declaration of an unused function. Signed-off-by:
-
Kees Cook authored
commit 82168140 upstream. In preparation for splitting out ET_DYN ASLR, this refactors the use of mmap_rnd() to be used similarly to arm, and extracts the checking of PF_RANDOMIZE. Signed-off-by:
-
Kees Cook authored
commit fbbc400f upstream. To address the "offset2lib" ASLR weakness[1], this separates ET_DYN ASLR from mmap ASLR, as already done on s390. The architectures that are already randomizing mmap (arm, arm64, mips, powerpc, s390, and x86), have their various forms of arch_mmap_rnd() made available via the new CONFIG_ARCH_HAS_ELF_RANDOMIZE. For these architectures, arch_randomize_brk() is collapsed as well. This is an alternative to the solutions in: https://lkml.org/lkml/2015/2/23/442 I've been able to test x86 and arm, and the buildbot (so far) seems happy with building the rest. [1] http://cybersecurity.upv.es/attacks/offset2lib/offset2lib.html This patch (of 10): In preparation for splitting out ET_DYN ASLR, this moves the ASLR calculations for mmap on ARM into a separate routine, similar to x86. This also removes the redundant check of personality (PF_RANDOMIZE is already set before calling arch_pick_mmap_layout). Signed-off-by:
-
- 03 May, 2016 2 commits
-
-
Ignat Korchagin authored
commit b348d7dd upstream. Fix potential out-of-bounds write to urb->transfer_buffer usbip handles network communication directly in the kernel. When receiving a packet from its peer, usbip code parses headers according to protocol. As part of this parsing urb->actual_length is filled. Since the input for urb->actual_length comes from the network, it should be treated as untrusted. Any entity controlling the network may put any value in the input and the preallocated urb->transfer_buffer may not be large enough to hold the data. Thus, the malicious entity is able to write arbitrary data to kernel memory. Signed-off-by:
Ignat Korchagin <ignat.korchagin@gmail.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org> Reference: CVE-2016-3955 Signed-off-by:
-
Kamal Mostafa authored
Fix bad 3.19-stable backport of mainline commit: b85de33a KVM: s390: avoid memory overwrites on emergency signal injection (3.19-stable: 2912b8ff) Signed-off-by:
-
- 02 May, 2016 1 commit
-
-
Kamal Mostafa authored
This reverts commit cde5ccf8. Not suitable for 3.19-stable (no PPC_FEATURE2_HTM_NOSC_COMP). Signed-off-by:
-
- 29 Apr, 2016 1 commit
-
-
Kamal Mostafa authored
Signed-off-by:
-
- 26 Apr, 2016 15 commits
-
-
Ben Hutchings authored
commit f43bfaed upstream. atl2 includes NETIF_F_SG in hw_features even though it has no support for non-linear skbs. This bug was originally harmless since the driver does not claim to implement checksum offload and that used to be a requirement for SG. Now that SG and checksum offload are independent features, if you explicitly enable SG *and* use one of the rare protocols that can use SG without checkusm offload, this potentially leaks sensitive information (before you notice that it just isn't working). Therefore this obscure bug has been designated CVE-2016-2117. Reported-by:
Justin Yackoski <jyackoski@crypto-nite.com> Signed-off-by:
Ben Hutchings <ben@decadent.org.uk> Fixes: ec5f0615 ("net: Kill link between CSUM and SG features.") Signed-off-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
-
Neil Armstrong authored
commit 210990b0 upstream. When the DaVinci emac driver is removed and re-probed, the actual pdev->dev.platform_data is populated with an unwanted valid pointer saved by the previous davinci_emac_of_get_pdata() call, causing a kernel crash when calling priv->int_disable() in emac_int_disable(). Unable to handle kernel paging request at virtual address c8622a80 ... [<c0426fb4>] (emac_int_disable) from [<c0427700>] (emac_dev_open+0x290/0x5f8) [<c0427700>] (emac_dev_open) from [<c04c00ec>] (__dev_open+0xb8/0x120) [<c04c00ec>] (__dev_open) from [<c04c0370>] (__dev_change_flags+0x88/0x14c) [<c04c0370>] (__dev_change_flags) from [<c04c044c>] (dev_change_flags+0x18/0x48) [<c04c044c>] (dev_change_flags) from [<c052bafc>] (devinet_ioctl+0x6b4/0x7ac) [<c052bafc>] (devinet_ioctl) from [<c04a1428>] (sock_ioctl+0x1d8/0x2c0) [<c04a1428>] (sock_ioctl) from [<c014f054>] (do_vfs_ioctl+0x41c/0x600) [<c014f054>] (do_vfs_ioctl) from [<c014f2a4>] (SyS_ioctl+0x6c/0x7c) [<c014f2a4>] (SyS_ioctl) from [<c000ff60>] (ret_fast_syscall+0x0/0x1c) Fixes: 42f59967 ("net: ethernet: davinci_emac: add OF support") Cc: Brian Hutchinson <b.hutchman@gmail.com> Signed-off-by:
Neil Armstrong <narmstrong@baylibre.com> Signed-off-by:
-
Neil Armstrong authored
commit 99164f9e upstream. In order to avoid an Unbalanced pm_runtime_enable in the DaVinci emac driver when the device is removed and re-probed, and a pm_runtime_disable() call in davinci_emac_remove(). Actually, using unbind/bind on a TI DM8168 SoC gives : $ echo 4a120000.ethernet > /sys/bus/platform/drivers/davinci_emac/unbind net eth1: DaVinci EMAC: davinci_emac_remove() $ echo 4a120000.ethernet > /sys/bus/platform/drivers/davinci_emac/bind davinci_emac 4a120000.ethernet: Unbalanced pm_runtime_enable Cc: Brian Hutchinson <b.hutchman@gmail.com> Fixes: 3ba97381 ("net: ethernet: davinci_emac: add pm_runtime support") Signed-off-by:
-
Stephen Boyd authored
commit eda5ecc0 upstream. The trigger delay algorithm that converts from microseconds to the register value looks incorrect. According to most of the PMIC documentation, the equation is delay (Seconds) = (1 / 1024) * 2 ^ (x + 4) except for one case where the documentation looks to have a formatting issue and the equation looks like delay (Seconds) = (1 / 1024) * 2 x + 4 Most likely this driver was written with the improper documentation to begin with. According to the downstream sources the valid delays are from 2 seconds to 1/64 second, and the latter equation just doesn't make sense for that. Let's fix the algorithm and the range check to match the documentation and the downstream sources. Reported-by:
Bjorn Andersson <bjorn.andersson@linaro.org> Fixes: 92d57a73 ("input: Add support for Qualcomm PMIC8XXX power key") Signed-off-by:
Stephen Boyd <sboyd@codeaurora.org> Tested-by:
John Stultz <john.stultz@linaro.org> Acked-by:
Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by:
-
Eric Dumazet authored
commit 6517eb59 upstream. On 64bit kernels, device stats are 64bit wide, not 32bit. Fixes: 1c1008c7 ("net: bcmgenet: add main driver file") Signed-off-by:
Eric Dumazet <edumazet@google.com> Cc: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by:
-
Heiko Carstens authored
commit 84976952 upstream. arch_spin_lock_wait_flags() checks if a spinlock is not held before trying a compare and swap instruction. If the lock is unlocked it tries the compare and swap instruction, however if a different cpu grabbed the lock in the meantime the instruction will fail as expected. Subsequently the arch_spin_lock_wait_flags() incorrectly tries to figure out if the cpu that holds the lock is running. However it is using the wrong cpu number for this (-1) and then will also yield the current cpu to the wrong cpu. Fix this by adding a missing continue statement. Fixes: 470ada6b ("s390/spinlock: refactor arch_spin_lock_wait[_flags]") Signed-off-by:
Heiko Carstens <heiko.carstens@de.ibm.com> Acked-by:
-
Keerthy authored
commit 56b367c0 upstream. pcs_parse_bits_in_pinctrl_entry uses ffs which gives bit indices ranging from 1 to MAX. This leads to a corner case where we try to request the pin number = MAX and fails. bit_pos value is being calculted using ffs. pin_num_from_lsb uses bit_pos value. pins array is populated with: pin + pin_num_from_lsb. The above is 1 more than usual bit indices as bit_pos uses ffs to compute first set bit. Hence the last of the pins array is populated with the MAX value and not MAX - 1 which causes error when we call pin_request. mask_pos is rightly calculated as ((pcs->fmask) << (bit_pos - 1)) Consequently val_pos and submask are correct. Hence use __ffs which gives (ffs(x) - 1) as the first bit set. fixes: 4e7e8017 ("pinctrl: pinctrl-single: enhance to configure multiple pins of different modules") Signed-off-by:
Keerthy <j-keerthy@ti.com> Acked-by:
Tony Lindgren <tony@atomide.com> Signed-off-by:
Linus Walleij <linus.walleij@linaro.org> Signed-off-by:
-
Alexei Starovoitov authored
commit d82bccc6 upstream. verifier must check for reserved size bits in instruction opcode and reject BPF_LD | BPF_ABS | BPF_DW and BPF_LD | BPF_IND | BPF_DW instructions, otherwise interpreter will WARN_RATELIMIT on them during execution. Fixes: ddd872bc ("bpf: verifier: add checks for BPF_ABS | BPF_IND instructions") Signed-off-by:
Alexei Starovoitov <ast@kernel.org> Acked-by:
Daniel Borkmann <daniel@iogearbox.net> Signed-off-by:
-
Lars Persson authored
commit 3dcd493f upstream. A failure in validate_xmit_skb_list() triggered an unconditional call to dev_requeue_skb with skb=NULL. This slowly grows the queue discipline's qlen count until all traffic through the queue stops. We take the optimistic approach and continue running the queue after a failure since it is unknown if later packets also will fail in the validate path. Fixes: 55a93b3e ("qdisc: validate skb without holding lock") Signed-off-by:
Lars Persson <larper@axis.com> Acked-by:
-
Mathias Krause authored
commit 309cf37f upstream. Because we miss to wipe the remainder of i->addr[] in packet_mc_add(), pdiag_put_mclist() leaks uninitialized heap bytes via the PACKET_DIAG_MCLIST netlink attribute. Fix this by explicitly memset(0)ing the remaining bytes in i->addr[]. Fixes: eea68e2f ("packet: Report socket mclist info via diag module") Signed-off-by:
Mathias Krause <minipli@googlemail.com> Cc: Eric W. Biederman <ebiederm@xmission.com> Cc: Pavel Emelyanov <xemul@parallels.com> Acked-by:
Pavel Emelyanov <xemul@virtuozzo.com> Signed-off-by:
-
Sebastian Ott authored
commit b707c65a upstream. When we refuse a non REQ_TYPE_FS request in the build request function we already hold the queue lock. Thus we must not call blk_end_request_all but __blk_end_request_all. Reported-by:
Peter Oberparleiter <oberpar@linux.vnet.ibm.com> Fixes: de9587a2 ('s390/scm_blk: fix endless loop for requests != REQ_TYPE_FS') Signed-off-by:
Sebastian Ott <sebott@linux.vnet.ibm.com> Signed-off-by:
-
Tony Luck authored
commit ea5dfb5f upstream. Haswell and Broadwell can be configured to hash the channel interleave function using bits [27:12] of the physical address. On those processor models we must check to see if hashing is enabled (bit21 of the HASWELL_HASYSDEFEATURE2 register) and act accordingly. Based on a patch by patrickg <patrickg@supermicro.com> Tested-by:
Patrick Geary <patrickg@supermicro.com> Signed-off-by:
Tony Luck <tony.luck@intel.com> Acked-by:
Mauro Carvalho Chehab <mchehab@osg.samsung.com> Cc: Aristeu Rozanski <arozansk@redhat.com> Cc: Borislav Petkov <bp@alien8.de> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: linux-edac@vger.kernel.org Signed-off-by:
-
Tony Luck authored
commit ff15e95c upstream. In commit: eb1af3b7 ("Fix computation of channel address") I switched the "sck_way" variable from holding the log2 value read from the h/w to instead be the actual number. Unfortunately it is needed in log2 form when used to shift the address. Tested-by:
-
Jan Beulich authored
commit 103f6112 upstream. Huge pages are not normally available to PV guests. Not suppressing hugetlbfs use results in an endless loop of page faults when user mode code tries to access a hugetlbfs mapped area (since the hypervisor denies such PTEs to be created, but error indications can't be propagated out of xen_set_pte_at(), just like for various of its siblings), and - once killed in an oops like this: kernel BUG at .../fs/hugetlbfs/inode.c:428! invalid opcode: 0000 [#1] SMP ... RIP: e030:[<ffffffff811c333b>] [<ffffffff811c333b>] remove_inode_hugepages+0x25b/0x320 ... Call Trace: [<ffffffff811c3415>] hugetlbfs_evict_inode+0x15/0x40 [<ffffffff81167b3d>] evict+0xbd/0x1b0 [<ffffffff8116514a>] __dentry_kill+0x19a/0x1f0 [<ffffffff81165b0e>] dput+0x1fe/0x220 [<ffffffff81150535>] __fput+0x155/0x200 [<ffffffff81079fc0>] task_work_run+0x60/0xa0 [<ffffffff81063510>] do_exit+0x160/0x400 [<ffffffff810637eb>] do_group_exit+0x3b/0xa0 [<ffffffff8106e8bd>] get_signal+0x1ed/0x470 [<ffffffff8100f854>] do_signal+0x14/0x110 [<ffffffff810030e9>] prepare_exit_to_usermode+0xe9/0xf0 [<ffffffff814178a5>] retint_user+0x8/0x13 This is CVE-2016-3961 / XSA-174. Reported-by:
Vitaly Kuznetsov <vkuznets@redhat.com> Signed-off-by:
Jan Beulich <jbeulich@suse.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Andy Lutomirski <luto@amacapital.net> Cc: Boris Ostrovsky <boris.ostrovsky@oracle.com> Cc: Borislav Petkov <bp@alien8.de> Cc: Brian Gerst <brgerst@gmail.com> Cc: David Vrabel <david.vrabel@citrix.com> Cc: Denys Vlasenko <dvlasenk@redhat.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Juergen Gross <JGross@suse.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Luis R. Rodriguez <mcgrof@suse.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Toshi Kani <toshi.kani@hp.com> Cc: xen-devel <xen-devel@lists.xenproject.org> Link: http://lkml.kernel.org/r/57188ED802000078000E431C@prv-mh.provo.novell.comSigned-off-by:
-
Dominik Dingel authored
commit 2531c8cf upstream. s390 has a constant hugepage size, by setting HPAGE_SHIFT we also change e.g. the pageblock_order, which should be independent in respect to hugepage support. With this patch every architecture is free to define how to check for hugepage support. Signed-off-by:
Dominik Dingel <dingel@linux.vnet.ibm.com> Acked-by:
-
