- 21 May, 2010 1 commit
-
-
Felix Radensky authored
At the moment only PCI-E briges can be flagged as hotplug, thus allowing manual resource preallocation via pci=hpmemsize=nnM and pci=hpiosize=nnM kernel parameters. Some PCI hotplug bridges, e.g. PLX 6254 can also benefit from this functionalily, as kernel fails to properly allocate their resources when hotplug device is added and PCI bus is rescanned. This patch adds header quirk for PLX 6254 that marks this bridge as hotplug. Other PCI bridges with similar problems can use it as well. Signed-off-by:
Felix Radensky <felix@embedded-sol.com> Signed-off-by:
Jesse Barnes <jbarnes@virtuousgeek.org>
-
- 18 May, 2010 7 commits
-
-
Feng Tang authored
Both ACPI and SFI firmwares will have MCFG space, but the error message isn't valid on SFI, so don't print the message in that case. Signed-off-by:
Feng Tang <feng.tang@intel.com> Signed-off-by:
-
Julia Lawall authored
Use kmemdup when some other buffer is immediately copied into the allocated region. A simplified version of the semantic patch that makes this change is as follows: (http://coccinelle.lip6.fr/) // <smpl> @@ expression from,to,size,flag; statement S; @@ - to = \(kmalloc\|kzalloc\)(size,flag); + to = kmemdup(from,size,flag); if (to==NULL || ...) S - memcpy(to, from, size); // </smpl> Signed-off-by:
Julia Lawall <julia@diku.dk> Signed-off-by:
-
Rafael J. Wysocki authored
I power management document, Documentation/power/pci.txt, is outdated and partially inaccurate. It also is missing some important information about the power management of PCI device. Rewrite it to make it more up to date and more complete. Reviewed-by:
Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by:
Rafael J. Wysocki <rjw@sisk.pl>
-
Prarit Bhargava authored
pci_read/write_vpd() can fail due to a timeout. Usually the command times out because of firmware issues (incorrect vpd length, etc.) on the PCI card. Currently, the timeout occurs silently. Output a message to the user indicating that they should check with their vendor for new firmware. Reviewed-by:
Prarit Bhargava <prarit@redhat.com> Signed-off-by:
-
Roman Fietze authored
This fixes all occurrences of pci_enable_device and pci_disable_device in all comments. There are no code changes involved. Signed-off-by:
Roman Fietze <roman.fietze@telemotive.de> Signed-off-by:
-
Alex Deucher authored
Doesn't work reliably for internal gfx. Fixes kernel bug https://bugzilla.kernel.org/show_bug.cgi?id=15626. Signed-off-by:
Alex Deucher <alexdeucher@gmail.com> Cc: Stable <stable@kernel.org> Signed-off-by:
-
Ben Hutchings authored
As reported in <http://bugs.debian.org/552299>, MSI appears to be broken for this on-board device. We already have a quirk for the P5N32-SLI Premium; extend it to cover both variants of the board. Reported-by:
Romain DEGEZ <romain.degez@smartjog.com> Signed-off-by:
Ben Hutchings <ben@decadent.org.uk> Cc: stable@kernel.org Signed-off-by:
-
- 11 May, 2010 32 commits
-
-
Seth Heasley authored
This patch adds additional LPC Controller DeviceIDs for the Intel Cougar Point PCH. The DeviceIDs are defined and referenced as a range of values, the same way Ibex Peak was implemented. Signed-off-by:
Seth Heasley <seth.heasley@intel.com> Signed-off-by:
-
Hidetoshi Seto authored
Style cleanup for pci_{en,dis}able_pcie_error_reporting(). Signed-off-by:Hidetoshi Seto <seto.hidetoshi@jp.fujitsu.com> Reviewed-by:
Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com> Signed-off-by:
-
Hidetoshi Seto authored
Skip zero-ing in aer_alloc_rpc() since it is allocated by kzalloc(). The closing comment marker "*/" is recommended for kernel-doc comments. Signed-off-by:
-
Hidetoshi Seto authored
I noticed that when I inject a fatal error to an endpoint via aer-inject, aer_root_reset() is called as reset_link for a downstream port at upstream of the endpoint: pcieport 0000:00:06.0: AER: Uncorrected (Fatal) error received: id=5401 : pcieport 0000:52:02.0: Root Port link has been reset It externally appears to be working, but internally issues some accesses to PCI_ERR_ROOT_COMMAND/STATUS registers that is for root port so not available on downstream port. This patch introduces default_downstream_reset_link that is a version of aer_root_reset() with no accesses to root port's register. It is used for downstream ports that has no reset_link function its specific. This patch also updates related description in pcieaer-howto.txt. Some minor fixes are included. Signed-off-by:
-
Hidetoshi Seto authored
The structure find_aer_service_data is no longer useful. Signed-off-by:
Jin Dongming <jin.dongming@np.css.fujitsu.com> Signed-off-by:
-
Hidetoshi Seto authored
The pcie->port of port service device points the port associated the service with. The find_aer_service iterates over children of given port udev. So it is clear that the pcie->port of port service of given port udev must always point the udev. Therefore we can know the type of udev without checking its children. Signed-off-by:
-
Hidetoshi Seto authored
Make it clear that we only interest in 2 *_RCV bits. Signed-off-by:
-
Hidetoshi Seto authored
The Error Source Identification Register (Offset 34h) is 4 byte which contains a couple of 2 byte field, "[15:0] ERR_COR Source Identification" and "[31:16] ERR_FATAL/NONFATAL Source Identification." This patch defines PCI_ERR_ROOT_ERR_SRC to make dword access sensible. Signed-off-by:
-
Hidetoshi Seto authored
Move dev_printks for debug into do_recovery(). This allows do_recovery() to return void. Signed-off-by:
-
Hidetoshi Seto authored
Current get_e_source() returns pointer to an element of array. However since it also progress consume counter, it is possible that the element is overwritten by newly produced data before the element is really consumed. This patch changes get_e_source() to copy contents of the element to address pointed by its caller. Once copied the element in array can be consumed. And relocate this function to more innocuous place. Signed-off-by:
-
Hidetoshi Seto authored
Divide tricky for-loop into readable if-blocks. The logic to set multi_error_valid (to force walking pci bus hierarchy to find 2nd~ error devices) is changed too, to check MULTI_{,_UN}COR_RCV bit individually and to force walk only when it is required. And rework setting e_info->severity for uncorrectable, not to use magic numbers. Signed-off-by: -
Hidetoshi Seto authored
Stop iteration if we cannot register any more. Signed-off-by:
-
Hidetoshi Seto authored
Inline too-simple subroutine only used here. Signed-off-by:
-
Hidetoshi Seto authored
Take core part of find_device_iter() to make a new function is_error_source() that checks given device has report an error or not. Signed-off-by:
-
Hidetoshi Seto authored
Return bool to indicate that the source device is found or not. This allows us to skip calling aer_process_err_devices() if we can. And move dev_printk for debug into this function. v2: return bool instead of int Signed-off-by:
-
Hidetoshi Seto authored
These functions are only called from init/remove path of aerdrv, so move them from aerdrv_core.c to aerdrv.c, to make them static. Signed-off-by:
-
Hidetoshi Seto authored
This cleanup solves some minor naming issues by removing unuseful function aer_delete_rootport() and by renaming disable_root_aer() to aer_disable_rootport(). - Inconsistent location of alloc & free: The struct rpc is allocated in aer_alloc_rpc() at aerdrv.c while it is implicitly freed in aer_delete_rootport() at aerdrv_core.c. - Inconsistent function name: It makes a bit confusion that aer_delete_rootport() is seemed to be paired with aer_enable_rootport(), i.e. there is neither "add" against "delete" nor "disable" against "enable". Signed-off-by:
-
Hidetoshi Seto authored
Handle preserved bits properly. Signed-off-by:
-
Hidetoshi Seto authored
Follow new format. Signed-off-by:
-
Michal Schmidt authored
A successful write() to the "reset" sysfs attribute should return the number of bytes written, not 0. Otherwise userspace (bash) retries the write over and over again. Acked-by:
Michael S. Tsirkin <mst@redhat.com> Acked-by:
Greg Kroah-Hartman <gregkh@suse.de> Signed-off-by:
Michal Schmidt <mschmidt@redhat.com> Signed-off-by:
-
Jesse Barnes authored
Most current machines have no problem with this, and in fact many devices and features work best (or only!) with MSI. Reported-by:
Petteri Räty <betelgeuse@gentoo.org> Signed-off-by:
-
Alan Cox authored
SuperIO devices share regions and use lock/unlock operations to chip select. We therefore need to be able to request a resource and wait for it to be freed by whichever other SuperIO device currently hogs it. Right now you have to poll which is horrible. Add a MUXED field to IO port resources. If the MUXED field is set on the resource and on the request (via request_muxed_region) then we block until the previous owner of the muxed resource releases their region. This allows us to implement proper resource sharing and locking for superio chips using code of the form enable_my_superio_dev() { request_muxed_region(0x44, 0x02, "superio:watchdog"); outb() ..sequence to enable chip } disable_my_superio_dev() { outb() .. sequence of disable chip release_region(0x44, 0x02); } Signed-off-by:Giel van Schijndel <me@mortis.eu> Signed-off-by:
Alan Cox <alan@linux.intel.com> Signed-off-by:
-
Thomas Gleixner authored
pci_config_lock must be a real spinlock in preempt-rt. Convert it to raw_spinlock. No change for !RT kernels. Signed-off-by:
Thomas Gleixner <tglx@linutronix.de> Signed-off-by:
-
Thomas Gleixner authored
pci_lock must be a real spinlock in preempt-rt. Convert it to raw_spinlock. No change for !RT kernels. Signed-off-by:
-
Alan Stern authored
This patch (as1353) removes a couple of unnecessary assignments from the PCI core. The should_wakeup flag is naturally initialized to 0; there's no need to clear it. Acked-by:
Alan Stern <stern@rowland.harvard.edu> Signed-off-by:
-
Alex Chiang authored
Create convenience symlinks in sysfs, linking slots to device functions, and vice versa. These links make it easier for users to figure out which devices actually live in what slots. For example: sapphire:/sys/bus/pci/slots # ls 1 10 2 3 4 5 6 7 8 9 sapphire:/sys/bus/pci/slots # ls -l 3 total 0 -r--r--r-- 1 root root 65536 Aug 18 14:10 address lrwxrwxrwx 1 root root 0 Aug 18 14:10 function0 -> ../../../../devices/pci0000:23/0000:23:01.0 lrwxrwxrwx 1 root root 0 Aug 18 14:10 function1 -> ../../../../devices/pci0000:23/0000:23:01.1 sapphire:/sys/bus/pci/slots # ls -l 3/function0/slot lrwxrwxrwx 1 root root 0 Aug 18 14:13 3/function0/slot -> ../../../bus/pci/slots/3 The original form of this patch was written by Matthew Wilcox, and was enhanced to include links from the sysfs slots/ directory pointing back at the device functions. Cc: willy@linux.intel.com Signed-off-by:
Alex Chiang <achiang@hp.com> Signed-off-by:
-
git://git.kernel.org/pub/scm/linux/kernel/git/airlied/drm-2.6Linus Torvalds authored
* 'drm-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/airlied/drm-2.6: drm/radeon: Fix 3 regressions - since buffer rework
-
git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6Linus Torvalds authored
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6: net: Fix FDDI and TR config checks in ipv4 arp and LLC. IPv4: unresolved multicast route cleanup mac80211: remove association work when processing deauth request ar9170: wait for asynchronous firmware loading ipv4: udp: fix short packet and bad checksum logging phy: Fix initialization in micrel driver. sctp: Fix a race between ICMP protocol unreachable and connect() veth: Dont kfree_skb() after dev_forward_skb() IPv6: fix IPV6_RECVERR handling of locally-generated errors net/gianfar: drop recycled skbs on MTU change iwlwifi: work around passive scan issue
-
David Howells authored
Fix an occasional EIO returned by a call to vfs_unlink(): [ 4868.465413] CacheFiles: I/O Error: Unlink failed [ 4868.465444] FS-Cache: Cache cachefiles stopped due to I/O error [ 4947.320011] CacheFiles: File cache on md3 unregistering [ 4947.320041] FS-Cache: Withdrawing cache "mycache" [ 5127.348683] FS-Cache: Cache "mycache" added (type cachefiles) [ 5127.348716] CacheFiles: File cache on md3 registered [ 7076.871081] CacheFiles: I/O Error: Unlink failed [ 7076.871130] FS-Cache: Cache cachefiles stopped due to I/O error [ 7116.780891] CacheFiles: File cache on md3 unregistering [ 7116.780937] FS-Cache: Withdrawing cache "mycache" [ 7296.813394] FS-Cache: Cache "mycache" added (type cachefiles) [ 7296.813432] CacheFiles: File cache on md3 registered What happens is this: (1) A cached NFS file is seen to have become out of date, so NFS retires the object and immediately acquires a new object with the same key. (2) Retirement of the old object is done asynchronously - so the lookup/create to generate the new object may be done first. This can be a problem as the old object and the new object must exist at the same point in the backing filesystem (i.e. they must have the same pathname). (3) The lookup for the new object sees that a backing file already exists, checks to see whether it is valid and sees that it isn't. It then deletes that file and creates a new one on disk. (4) The retirement phase for the old file is then performed. It tries to delete the dentry it has, but ext4_unlink() returns -EIO because the inode attached to that dentry no longer matches the inode number associated with the filename in the parent directory. The trace below shows this quite well. [md5sum] ==> __fscache_relinquish_cookie(ffff88002d12fb58{NFS.fh,ffff88002ce62100},1) [md5sum] ==> __fscache_acquire_cookie({NFS.server},{NFS.fh},ffff88002ce62100) NFS has retired the old cookie and asked for a new one. [kslowd] ==> fscache_object_state_machine({OBJ52,OBJECT_ACTIVE,24}) [kslowd] <== fscache_object_state_machine() [->OBJECT_DYING] [kslowd] ==> fscache_object_state_machine({OBJ53,OBJECT_INIT,0}) [kslowd] <== fscache_object_state_machine() [->OBJECT_LOOKING_UP] [kslowd] ==> fscache_object_state_machine({OBJ52,OBJECT_DYING,24}) [kslowd] <== fscache_object_state_machine() [->OBJECT_RECYCLING] The old object (OBJ52) is going through the terminal states to get rid of it, whilst the new object - (OBJ53) - is coming into being. [kslowd] ==> fscache_object_state_machine({OBJ53,OBJECT_LOOKING_UP,0}) [kslowd] ==> cachefiles_walk_to_object({ffff88003029d8b8},OBJ53,@68,) [kslowd] lookup '@68' [kslowd] next -> ffff88002ce41bd0 positive [kslowd] advance [kslowd] lookup 'Es0g00og0_Nd_XCYe3BOzvXrsBLMlN6aw16M1htaA' [kslowd] next -> ffff8800369faac8 positive The new object has looked up the subdir in which the file would be in (getting dentry ffff88002ce41bd0) and then looked up the file itself (getting dentry ffff8800369faac8). [kslowd] validate 'Es0g00og0_Nd_XCYe3BOzvXrsBLMlN6aw16M1htaA' [kslowd] ==> cachefiles_bury_object(,'@68','Es0g00og0_Nd_XCYe3BOzvXrsBLMlN6aw16M1htaA') [kslowd] remove ffff8800369faac8 from ffff88002ce41bd0 [kslowd] unlink stale object [kslowd] <== cachefiles_bury_object() = 0 It then checks the file's xattrs to see if it's valid. NFS says that the auxiliary data indicate the file is out of date (obvious to us - that's why NFS ditched the old version and got a new one). CacheFiles then deletes the old file (dentry ffff8800369faac8). [kslowd] redo lookup [kslowd] lookup 'Es0g00og0_Nd_XCYe3BOzvXrsBLMlN6aw16M1htaA' [kslowd] next -> ffff88002cd94288 negative [kslowd] create -> ffff88002cd94288{ffff88002cdaf238{ino=148247}} CacheFiles then redoes the lookup and gets a negative result in a new dentry (ffff88002cd94288) which it then creates a file for. [kslowd] ==> cachefiles_mark_object_active(,OBJ53) [kslowd] <== cachefiles_mark_object_active() = 0 [kslowd] === OBTAINED_OBJECT === [kslowd] <== cachefiles_walk_to_object() = 0 [148247] [kslowd] <== fscache_object_state_machine() [->OBJECT_AVAILABLE] The new object is then marked active and the state machine moves to the available state - at which point NFS can start filling the object. [kslowd] ==> fscache_object_state_machine({OBJ52,OBJECT_RECYCLING,20}) [kslowd] ==> fscache_release_object() [kslowd] ==> cachefiles_drop_object({OBJ52,2}) [kslowd] ==> cachefiles_delete_object(,OBJ52{ffff8800369faac8}) The old object, meanwhile, goes on with being retired. If allocation occurs first, cachefiles_delete_object() has to wait for dir->d_inode->i_mutex to become available before it can continue. [kslowd] ==> cachefiles_bury_object(,'@68','Es0g00og0_Nd_XCYe3BOzvXrsBLMlN6aw16M1htaA') [kslowd] remove ffff8800369faac8 from ffff88002ce41bd0 [kslowd] unlink stale object EXT4-fs warning (device sda6): ext4_unlink: Inode number mismatch in unlink (148247!=148193) CacheFiles: I/O Error: Unlink failed FS-Cache: Cache cachefiles stopped due to I/O error CacheFiles then tries to delete the file for the old object, but the dentry it has (ffff8800369faac8) no longer points to a valid inode for that directory entry, and so ext4_unlink() returns -EIO when de->inode does not match i_ino. [kslowd] <== cachefiles_bury_object() = -5 [kslowd] <== cachefiles_delete_object() = -5 [kslowd] <== fscache_object_state_machine() [->OBJECT_DEAD] [kslowd] ==> fscache_object_state_machine({OBJ53,OBJECT_AVAILABLE,0}) [kslowd] <== fscache_object_state_machine() [->OBJECT_ACTIVE] (Note that the above trace includes extra information beyond that produced by the upstream code). The fix is to note when an object that is being retired has had its object deleted preemptively by a replacement object that is being created, and to skip the second removal attempt in such a case. Reported-by:Greg M <gregm@servu.net.au> Reported-by:
Mark Moseley <moseleymark@gmail.com> Reported-by:
David Howells <dhowells@redhat.com> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
Alex Chiang authored
Duplicate entries ended up acpisleep_dmi_table[] by accident. They don't hurt functionality, but they are ugly, so let's get rid of them. Cc: stable@kernel.org Signed-off-by:
Alex Chiang <achiang@canonical.com> Signed-off-by:
-
-
Jean Delvare authored
Commit b4fe9454 introduced 3 bugs, fix them: * Use the right command dword for second packet offset in RADEON_CNTL_PAINT/BITBLT_MULTI. * Don't leak memory if drm_buffer_copy_from_user() fails. * Don't call drm_buffer_unprocessed() unless drm_buffer_alloc() and drm_buffer_copy_from_user() have been called successfully first. Signed-off-by:
Jean Delvare <khali@linux-fr.org> Cc: Pauli Nieminen <suokkos@gmail.com> Signed-off-by:
Dave Airlie <airlied@redhat.com>
-
