This addition follows the same pattern as the dir2 block CRCs.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Ben Myers <bpm@sgi.com>
Signed-off-by: Ben Myers <bpm@sgi.com>

This addition follows the same pattern as the dir2 block CRCs, but
with a few differences. The main difference is that the free block
header is different between the v2 and v3 formats, so an "in-core"
free block header has been added and _todisk/_from_disk functions
used to abstract the differences in structure format from the code.
This is similar to the on-disk superblock versus the in-core
superblock setup. The in-core strucutre is populated when the buffer
is read from disk, all the in memory checks and modifications are
done on the in-core version of the structure which is written back
to the buffer before the buffer is logged.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Ben Myers <bpm@sgi.com>
Signed-off-by: Ben Myers <bpm@sgi.com>

Now that directory buffers are made from a single struct xfs_buf, we
can add CRC calculation and checking callbacks. While there, add all
the fields to the on disk structures for future functionality such
as d_type support, uuids, block numbers, owner inode, etc.

To distinguish between the different on disk formats, change the
magic numbers for the new format directory blocks.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Ben Myers <bpm@sgi.com>
Signed-off-by: Ben Myers <bpm@sgi.com>

Add a header to the remote symlink block, containing location and
owner information, as well as CRCs and LSN fields. This requires
verifiers to be added to the remote symlink buffers for CRC enabled
filesystems.

This also fixes a bug reading multiple block symlinks, where the second
block overwrites the first block when copying out the link name.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Ben Myers <bpm@sgi.com>
Signed-off-by: Ben Myers <bpm@sgi.com>

The symlink code is about to get more complicated when CRCs are
added for remote symlink blocks. The symlink management code is
mostly self contained, so move it to it's own files so that all the
new code and the existing symlink code will not be intermingled
with other unrelated code.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Ben Myers <bpm@sgi.com>
Signed-off-by: Ben Myers <bpm@sgi.com>

Add a new inode version with a larger core.  The primary objective is
to allow for a crc of the inode, and location information (uuid and ino)
to verify it was written in the right place.  We also extend it by:

	a creation time (for Samba);
	a changecount (for NFSv4);
	a flush sequence (in LSN format for recovery);
	an additional inode flags field; and
	some additional padding.

These additional fields are not implemented yet, but already laid
out in the structure.

[dchinner@redhat.com] Added LSN and flags field, some factoring and rework to
capture all the necessary information in the crc calculation.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Ben Myers <bpm@sgi.com>
Signed-off-by: Ben Myers <bpm@sgi.com>

Use the reserved space in struct xfs_dqblk to store a UUID and a crc
for the quota blocks.

[dchinner@redhat.com] Add a LSN field and update for current verifier
infrastructure.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Ben Myers <bpm@sgi.com>
Signed-off-by: Ben Myers <bpm@sgi.com>

Same set of changes made to the AGF need to be made to the AGI.
This patch has a similar history to the AGF, hence a similar
sign-off chain.
Signed-off-by: Dave Chinner <dgc@sgi.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Dave Chinner <dgc@redhat.com>
Reviewed-by: Ben Myers <bpm@sgi.com>
Signed-off-by: Ben Myers <bpm@sgi.com>

Add CRC checks, location information and a magic number to the AGFL.
Previously the AGFL was just a block containing nothing but the
free block pointers.  The new AGFL has a real header with the usual
boilerplate instead, so that we can verify it's not corrupted and
written into the right place.

[dchinner@redhat.com] Added LSN field, reworked significantly to fit
into new verifier structure and growfs structure, enabled full
verifier functionality now there is a header to verify and we can
guarantee an initialised AGFL.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Ben Myers <bpm@sgi.com>
Signed-off-by: Ben Myers <bpm@sgi.com>

The AGF already has some self identifying fields (e.g. the sequence
number) so we only need to add the uuid to it to identify the
filesystem it belongs to. The location is fixed based on the
sequence number, so there's no need to add a block number, either.

Hence the only additional fields are the CRC and LSN fields. These
are unlogged, so place some space between the end of the logged
fields and them so that future expansion of the AGF for logged
fields can be placed adjacent to the existing logged fields and
hence not complicate the field-derived range based logging we
currently have.

Based originally on a patch from myself, modified further by
Christoph Hellwig and then modified again to fit into the
verifier structure with additional fields by myself. The multiple
signed-off-by tags indicate the age and history of this patch.
Signed-off-by: Dave Chinner <dgc@sgi.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Ben Myers <bpm@sgi.com>
Signed-off-by: Ben Myers <bpm@sgi.com>

Add support for larger btree blocks that contains a CRC32C checksum,
a filesystem uuid and block number for detecting filesystem
consistency and out of place writes.

[dchinner@redhat.com] Also include an owner field to allow reverse
mappings to be implemented for improved repairability and a LSN
field to so that log recovery can easily determine the last
modification that made it to disk for each buffer.

[dchinner@redhat.com] Add buffer log format flags to indicate the
type of buffer to recovery so that we don't have to do blind magic
number tests to determine what the buffer is.

[dchinner@redhat.com] Modified to fit into the verifier structure.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Ben Myers <bpm@sgi.com>
Signed-off-by: Ben Myers <bpm@sgi.com>

Currently xfs_corruption_error() dumps the first 16 bytes of the
buffer that is passed to it when a corruption occurs. This is not
large enough to see the entire state of the header of the block that
was determined to be corrupt.  increase the output to 64 bytes to
capture the majority of all headers in all types of metadata blocks.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Ben Myers <bpm@sgi.com>
Signed-off-by: Ben Myers <bpm@sgi.com>

xfs_log_commit_iclog() function has been removed by commits 93b8a585:
	xfs: remove the deprecated nodelaylog option

Beginning from Linux 3.3, only delayed logging is supported so that
we call xfs_log_commit_cil() at xfs_trans_commit() only, remove the
useless comments so.
Signed-off-by: Jie Liu <jeff.liu@oracle.com>
Reviewed-by: Mark Tinguely <tinguely@sgi.com>
Signed-off-by: Ben Myers <bpm@sgi.com>

There is no more users of this Macro, so it's time to kill it dead.
Signed-off-by: Jie Liu <jeff.liu@oracle.com>
Reviewed-by: Mark Tinguely <tinguely@sgi.com>
Signed-off-by: Ben Myers <bpm@sgi.com>

Filesystems are occasionally being shut down with this error:

xfs_trans_ail_delete_bulk: attempting to delete a log item that is
not in the AIL.

It was diagnosed to be related to the EFI/EFD commit order when the
EFI and EFD are in different checkpoints and the EFD is committed
before the EFI here:

http://oss.sgi.com/archives/xfs/2013-01/msg00082.html

The real problem is that a single bit cannot fully describe the
states that the EFI/EFD processing can be in. These completion
states are:

EFI			EFI in AIL	EFD		Result
committed/unpinned	Yes		committed	OK
committed/pinned	No		committed	Shutdown
uncommitted		No		committed	Shutdown


Note that the "result" field is what should happen, not what does
happen. The current logic is broken and handles the first two cases
correctly by luck.  That is, the code will free the EFI if the
XFS_EFI_COMMITTED bit is *not* set, rather than if it is set. The
inverted logic "works" because if both EFI and EFD are committed,
then the first __xfs_efi_release() call clears the XFS_EFI_COMMITTED
bit, and the second frees the EFI item. Hence as long as
xfs_efi_item_committed() has been called, everything appears to be
fine.

It is the third case where the logic fails - where
xfs_efd_item_committed() is called before xfs_efi_item_committed(),
and that results in the EFI being freed before it has been
committed. That is the bug that triggered the shutdown, and hence
keeping track of whether the EFI has been committed or not is
insufficient to correctly order the EFI/EFD operations w.r.t. the
AIL.

What we really want is this: the EFI is always placed into the
AIL before the last reference goes away. The only way to guarantee
that is that the EFI is not freed until after it has been unpinned
*and* the EFD has been committed. That is, restructure the logic so
that the only case that can occur is the first case.

This can be done easily by replacing the XFS_EFI_COMMITTED with an
EFI reference count. The EFI is initialised with it's own count, and
that is not released until it is unpinned. However, there is a
complication to this method - the high level EFI/EFD code in
xfs_bmap_finish() does not hold direct references to the EFI
structure, and runs a transaction commit between the EFI and EFD
processing. Hence the EFI can be freed even before the EFD is
created using such a method.

Further, log recovery uses the AIL for tracking EFI/EFDs that need
to be recovered, but it uses the AIL *differently* to the EFI
transaction commit. Hence log recovery never pins or unpins EFIs, so
we can't drop the EFI reference count indirectly to free the EFI.

However, this doesn't prevent us from using a reference count here.
There is a 1:1 relationship between EFIs and EFDs, so when we
initialise the EFI we can take a reference count for the EFD as
well. This solves the xfs_bmap_finish() issue - the EFI will never
be freed until the EFD is processed. In terms of log recovery,
during the committing of the EFD we can look for the
XFS_EFI_RECOVERED bit being set and drop the EFI reference as well,
thereby ensuring everything works correctly there as well.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Mark Tinguely <tinguely@sgi.com>
Signed-off-by: Ben Myers <bpm@sgi.com>

Ratelimited printk will be useful in printing xfs messages which are otherwise
not required to be printed always due to their high rate (to prevent kernel ring
buffer from overflowing), while at the same time required to be printed.
Signed-off-by: Raghavendra D Prabhu <rprabhu@wnohang.net>
Reviewed-by: Rich Johnston <rjohnston@sgi.com>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Ben Myers <bpm@sgi.com>

When a dirty page is truncated from a file but reclaim gets to it before
truncate_inode_pages(), we hit WARN_ON(delalloc) in
xfs_vm_releasepage(). This is because reclaim tries to write the page,
xfs_vm_writepage() just bails out (leaving page clean) and thus reclaim
thinks it can continue and calls xfs_vm_releasepage() on page with dirty
buffers.

Fix the issue by redirtying the page in xfs_vm_writepage(). This makes
reclaim stop reclaiming the page and also logically it keeps page in a
more consistent state where page with dirty buffers has PageDirty set.
Signed-off-by: Jan Kara <jack@suse.cz>
Reviewed-by: Carlos Maiolino <cmaiolino@redhat.com>
Signed-off-by: Ben Myers <bpm@sgi.com>

Add a tracepoint to provide some feedback on preallocation size
calculation.
Signed-off-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Mark Tinguely <tinguely@sgi.com>
Signed-off-by: Ben Myers <bpm@sgi.com>

Introduce the need_throttle() and calc_throttle() functions to
independently check whether throttling is required for a particular
dquot and if so, calculate the associated throttling metrics based
on the state of the quota. We use the same general algorithm to
calculate the throttle shift as for global free space with the
exception of using three stages rather than five.

Update xfs_iomap_prealloc_size() to use the smallest available
prealloc size based on each of the constraints and apply the
maximum shift to obtain the throttled preallocation size.
Signed-off-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Mark Tinguely <tinguely@sgi.com>
Signed-off-by: Ben Myers <bpm@sgi.com>

Enable tracking of high and low watermarks for preallocation
throttling of files under quota restrictions. These values are
calculated when the quota limit is read from disk or modified and
cached for later use by the throttling algorithm.

The high watermark specifies when preallocation is disabled, the
low watermark specifies when throttling is enabled and the low free
space data structure contains precalculated low free space limits
to serve as input to determine the level of throttling required.

Note that the low free space data structure is based on the
existing global low free space data structure with the exception of
using three stages (5%, 3% and 1%) rather than five to reduce the
impact of xfs_dquot memory overhead.
Signed-off-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Mark Tinguely <tinguely@sgi.com>
Signed-off-by: Ben Myers <bpm@sgi.com>

Modify xfs_qm_adjust_dqlimits() to take the xfs_dquot as a
parameter instead of just the xfs_disk_dquot_t so we can update
in-memory fields if necessary.
Signed-off-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Mark Tinguely <tinguely@sgi.com>
Signed-off-by: Ben Myers <bpm@sgi.com>

The round down occurs towards the beginning of the function. Push
it down after throttling has occurred. This is to support adding
further transformations to 'alloc_blocks' that might not preserve
power-of-two alignment (and thus could lead to rounding down
multiple times).
Signed-off-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Ben Myers <bpm@sgi.com>
Reviewed-by: Mark Tinguely <tinguely@sgi.com>
Signed-off-by: Ben Myers <bpm@sgi.com>

The majority of xfs_iomap_prealloc_size() executes within the
check for lack of default I/O size. Reverse the logic to remove the
extra indentation.
Signed-off-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Ben Myers <bpm@sgi.com>
Reviewed-by: Mark Tinguely <tinguely@sgi.com>
Signed-off-by: Ben Myers <bpm@sgi.com>

Add a version argument to XFS_LITINO so that it can return different values
depending on the inode version.  This is required for the upcoming v3 inodes
with a larger fixed layout dinode.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Ben Myers <bpm@sgi.com>
Signed-off-by: Ben Myers <bpm@sgi.com>

Failed buffer readahead can leave the buffer in the cache marked
with an error. Most callers that then issue a subsequent read on the
buffer do not zero the b_error field out, and so we may incorectly
detect an error during IO completion due to the stale error value
left on the buffer.

Avoid this problem by zeroing the error before IO submission. This
ensures that the only IO errors that are detected those captured
from are those captured from bio submission or completion.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Mark Tinguely <tinguely@sgi.com>
Signed-off-by: Ben Myers <bpm@sgi.com>

Looks the old m_inode_shrink is obsoleted as we perform inodes reclaim per AG via
m_reclaim_workqueue, this patch remove it from the xfs_mount structure if so.
Signed-off-by: Jie Liu <jeff.liu@oracle.com>
Cc: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Mark Tinguely <tinguely@sgi.com>
Signed-off-by: Ben Myers <bpm@sgi.com>

xfs_bmap.c is a big file, and some of the related code is spread all
throughout the file requiring function prototypes for static
function and jumping all through the file to follow a single call
path. Rearrange the code so that:

	a) related functionality is grouped together; and
	b) functions are grouped in call dependency order

While the diffstat is large, there are no code changes in the patch;
it is just moving the functionality around and removing the function
prototypes at the top of the file. The resulting layout of the code
is as follows (top of file to bottom):

	- miscellaneous helper functions
	- extent tree block counting routines
	- debug/sanity checking code
	- bmap free list manipulation functions
	- inode fork format manipulation functions
	- internal/external extent tree seach functions
	- extent tree manipulation functions used during allocation
	- functions used during extent read/allocate/removal
	  operations (i.e. xfs_bmapi_write, xfs_bmapi_read,
	  xfs_bunmapi and xfs_getbmap)

This means that following logic paths through the bmapi code is much
simpler - most of the code relevant to a specific operation is now
clustered together rather than spread all over the file....
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Mark Tinguely <tinguely@sgi.com>
Signed-off-by: Ben Myers <bpm@sgi.com>

Use more preferable function name which implies using a pseudo-random
number generator.
Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com>
Acked-by: <bpm@sgi.com>
Cc: Ben Myers <bpm@sgi.com>
Cc: Alex Elder <elder@kernel.org>
Cc: xfs@oss.sgi.com
Signed-off-by: Ben Myers <bpm@sgi.com>

When we read a buffer, we might get an error from the underlying
block device and not the real data. Hence if we get an IO error, we
shouldn't run the verifier but instead just pass the IO error
straight through.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Mark Tinguely <tinguely@sgi.com>
Signed-off-by: Ben Myers <bpm@sgi.com>

Fix the return type of xfs_iomap_eof_prealloc_initial_size() to
xfs_fsblock_t to reflect the fact that the return value may be an
unsigned 64 bits if XFS_BIG_BLKNOS is defined.
Signed-off-by: Mark Tinguely <tinguely@sgi.com>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Ben Myers <bpm@sgi.com>

The updated speculative preallocation algorithm for handling sparse
files can becomes less effective in situations with a high number of
concurrent, sequential writers. The number of writers and amount of
available RAM affect the writeback bandwidth slicing algorithm,
which in turn affects the block allocation pattern of XFS. For
example, running 32 sequential writers on a system with 32GB RAM,
preallocs become fixed at a value of around 128MB (instead of
steadily increasing to the 8GB maximum as sequential writes
proceed).

Update the speculative prealloc heuristic to base the size of the
next prealloc on double the size of the preceding extent. This
preserves the original aggressive speculative preallocation
behavior and continues to accomodate sparse files at a slight cost
of increasing the size of preallocated data regions following holes
of sparse files.
Signed-off-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Ben Myers <bpm@sgi.com>

If freesp == 0, we could end up in an infinite loop while squashing
the preallocation. Break the loop when we've killed the prealloc
entirely.
Signed-off-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Ben Myers <bpm@sgi.com>

Pull fbdev UAPI disintegration from David Howells:
 "You'll be glad to here that the end is nigh for the UAPI patches.
  Only the fbdev/framebuffer piece remains now that the SCSI stuff has
  gone in.

  Here are the UAPI disintegration bits for the fbdev drivers.  It
  appears that Florian hasn't had time to deal with my patch, but back
  in December he did say he didn't mind if I pushed it forward."

Yay.  No more uapi movement.  And hopefully no more big header file
cleanups coming up either, it just tends to be very painful.

* tag 'disintegrate-fbdev-20121220' of git://git.infradead.org/users/dhowells/linux-headers:
  UAPI: (Scripted) Disintegrate include/video

Merge tag 'stable/for-linus-3.9-rc1-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/konrad/xen

Pull Xen bug-fixes from Konrad Rzeszutek Wilk:
 - Update the Xen ACPI memory and CPU hotplug locking mechanism.
 - Fix PAT issues wherein various applications would not start
 - Fix handling of multiple MSI as AHCI now does it.
 - Fix ARM compile failures.

* tag 'stable/for-linus-3.9-rc1-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/konrad/xen:
  xenbus: fix compile failure on ARM with Xen enabled
  xen/pci: We don't do multiple MSI's.
  xen/pat: Disable PAT using pat_enabled value.
  xen/acpi: xen cpu hotplug minor updates
  xen/acpi: xen memory hotplug minor updates

Pull  more VFS bits from Al Viro:
 "Unfortunately, it looks like xattr series will have to wait until the
  next cycle ;-/

  This pile contains 9p cleanups and fixes (races in v9fs_fid_add()
  etc), fixup for nommu breakage in shmem.c, several cleanups and a bit
  more file_inode() work"

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
  constify path_get/path_put and fs_struct.c stuff
  fix nommu breakage in shmem.c
  cache the value of file_inode() in struct file
  9p: if v9fs_fid_lookup() gets to asking server, it'd better have hashed dentry
  9p: make sure ->lookup() adds fid to the right dentry
  9p: untangle ->lookup() a bit
  9p: double iput() in ->lookup() if d_materialise_unique() fails
  9p: v9fs_fid_add() can't fail now
  v9fs: get rid of v9fs_dentry
  9p: turn fid->dlist into hlist
  9p: don't bother with private lock in ->d_fsdata; dentry->d_lock will do just fine
  more file_inode() open-coded instances
  selinux: opened file can't have NULL or negative ->f_path.dentry

(In the meantime, the hlist traversal macros have changed, so this
required a semantic conflict fixup for the newly hlistified fid->dlist)

Pull btrfs fixup from Chris Mason:
 "Geert and James both sent this one in, sorry guys"

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mason/linux-btrfs:
  btrfs/raid56: Add missing #include <linux/vmalloc.h>

Pull second set of s390 patches from Martin Schwidefsky:
 "The main part of this merge are Heikos uaccess patches.  Together with
  commit 09884964 ("mm: do not grow the stack vma just because of an
  overrun on preceding vma") the user string access is hopefully fixed
  for good.

  In addition some bug fixes and two cleanup patches."

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux:
  s390/module: fix compile warning
  qdio: remove unused parameters
  s390/uaccess: fix kernel ds access for page table walk
  s390/uaccess: fix strncpy_from_user string length check
  input: disable i8042 PC Keyboard controller for s390
  s390/dis: Fix invalid array size
  s390/uaccess: remove pointless access_ok() checks
  s390/uaccess: fix strncpy_from_user/strnlen_user zero maxlen case
  s390/uaccess: shorten strncpy_from_user/strnlen_user
  s390/dasd: fix unresponsive device after all channel paths were lost
  s390/mm: ignore change bit for vmemmap
  s390/page table dumper: add support for change-recording override bit

Merge branch 'fixes-for-3.9-latest' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux

Pull second round of PARISC updates from Helge Deller:
 "The most important fix in this branch is the switch of io_setup,
  io_getevents and io_submit syscalls to use the available compat
  syscalls when running 32bit userspace on 64bit kernel.  Other than
  that it's mostly removal of compile warnings."

* 'fixes-for-3.9-latest' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux:
  parisc: fix redefinition of SET_PERSONALITY
  parisc: do not install modules when installing kernel
  parisc: fix compile warnings triggered by atomic_sub(sizeof(),v)
  parisc: check return value of down_interruptible() in hp_sdc_rtc.c
  parisc: avoid unitialized variable warning in pa_memcpy()
  parisc: remove unused variable 'compat_val'
  parisc: switch to compat_functions of io_setup, io_getevents and io_submit
  parisc: select ARCH_WANT_FRAME_POINTERS

Pull new ImgTec Meta architecture from James Hogan:
 "This adds core architecture support for Imagination's Meta processor
  cores, followed by some later miscellaneous arch/metag cleanups and
  fixes which I kept separate to ease review:

   - Support for basic Meta 1 (ATP) and Meta 2 (HTP) core architecture
   - A few fixes all over, particularly for symbol prefixes
   - A few privilege protection fixes
   - Several cleanups (setup.c includes, split out a lot of
     metag_ksyms.c)
   - Fix some missing exports
   - Convert hugetlb to use vm_unmapped_area()
   - Copy device tree to non-init memory
   - Provide dma_get_sgtable()"

* tag 'metag-v3.9-rc1-v4' of git://git.kernel.org/pub/scm/linux/kernel/git/jhogan/metag: (61 commits)
  metag: Provide dma_get_sgtable()
  metag: prom.h: remove declaration of metag_dt_memblock_reserve()
  metag: copy devicetree to non-init memory
  metag: cleanup metag_ksyms.c includes
  metag: move mm/init.c exports out of metag_ksyms.c
  metag: move usercopy.c exports out of metag_ksyms.c
  metag: move setup.c exports out of metag_ksyms.c
  metag: move kick.c exports out of metag_ksyms.c
  metag: move traps.c exports out of metag_ksyms.c
  metag: move irq enable out of irqflags.h on SMP
  genksyms: fix metag symbol prefix on crc symbols
  metag: hugetlb: convert to vm_unmapped_area()
  metag: export clear_page and copy_page
  metag: export metag_code_cache_flush_all
  metag: protect more non-MMU memory regions
  metag: make TXPRIVEXT bits explicit
  metag: kernel/setup.c: sort includes
  perf: Enable building perf tools for Meta
  metag: add boot time LNKGET/LNKSET check
  metag: add __init to metag_cache_probe()
  ...