- 11 Feb, 2008 15 commits
-
-
Ben Dooks authored
Patch from: Laurent Pinchart <laurentp@cse-semaphore.com> This patch adds a flag to the DM9000 platform data which, when set, configures the device to use an external PHY. Signed-off-by:
Laurent Pinchart <laurentp@cse-semaphore.com> Signed-off-by:
Ben Dooks <ben-linuy@fluff.org> Signed-off-by:
Jeff Garzik <jeff@garzik.org>
-
Ben Dooks authored
Patch from: Laurent Pinchart <laurentp@cse-semaphore.com> This patch splits the receive status in 8bit wide fields and convert the packet length from little endian to CPU byte order. Signed-off-by:
Ben Dooks <ben-linux@fluff.org> Signed-off-by:
-
Krishna Kumar authored
1. Add common code for stopping queue. 2. No need to call netif_stop_queue followed by netif_wake_queue (and infact a netif_start_queue could have been used instead), instead call stop_queue if required, and remove code under USE_GTS macro. 3. There is no need to check for netif_queue_stopped, as the network core guarantees that for us (I am sure every driver could remove that check, eg e1000 - I have tested that path a few billion times with about a few hundred thousand qstops but the condition never hit even once). Signed-off-by:
Krishna Kumar <krkumar2@in.ibm.com> Signed-off-by:
-
Benjamin Herrenschmidt authored
The e1000 driver stores the content of the PCI resources into unsigned long's before ioremapping. This breaks on 32 bits platforms that support 64 bits MMIO resources such as ppc 44x. This fixes it by removing those temporary variables and passing directly the result of pci_resource_start/len to ioremap. The side effect is that I removed the assignments to the netdev fields mem_start, mem_end and base_addr, which are totally useless for PCI devices. Signed-off-by:
Benjamin Herrenschmidt <benh@kernel.crashing.org> -- drivers/net/e1000/e1000_main.c | 18 +++++------------- 1 file changed, 5 insertions(+), 13 deletions(-) Signed-off-by:
-
Masakazu Mokuno authored
Signed-off-by:
Masakazu Mokuno <mokuno@sm.sony.co.jp> Acked-by:
Dan Williams <dcbw@redhat.com> Acked-by:
John W. Linville <linville@tuxdriver.com> Signed-off-by:
-
Masakazu Mokuno authored
Add support for dual network (net_device) interface so that ethernet and wireless can own separate ethX interfaces. V2 - Fix the bug that bringing down and up the interface keeps rx disabled. - Make 'gelic_net_poll_controller()' extern , as David Woodhouse pointed out at the previous submission. - Fix weird usage of member names for the rx descriptor chain V1 - Export functions which are convenient for both interfaces - Move irq allocation/release code to driver probe/remove handlers because interfaces share interrupts. - Allocate skbs by using dev_alloc_skb() instead of netdev_alloc_skb() as the interfaces share the hardware rx queue. - Add gelic_port struct in order to abstract dual interface handling - Change handlers for hardware queues so that they can handle dual {source,destination} interfaces. - Use new NAPI functions This is a prerequisite for the new PS3 wireless support. Signed-off-by: -
Masakazu Mokuno authored
Add support for interrupt driven port link status detection. Signed-off-by:
-
Masakazu Mokuno authored
Remove some ethtool handlers, which duplicate functionality that was already provided by the common ethtool handlers. Signed-off-by:
-
Masakazu Mokuno authored
Code cleanup: - Use appropriate prefixes for names instead of fixed 'gelic_net' so that objects of the functions, variables and constants can be estimated. - Remove definitions for IPSec offload to the gelic hardware. This functionality is never supported on PS3. - Group constants with enum. - Use bitwise constants for interrupt status, instead of bit numbers to eliminate shift operations. - Style fixes. Signed-off-by:
-
Masakazu Mokuno authored
Mark the members of the structure for DMA descriptors with proper endian annotations and use the appropriate accessor macros. As the gelic driver works only on PS3, all these macros will be expanded to null. Signed-off-by:
-
Masakazu Mokuno authored
The device id for lv1_net_set_interrupt_status_indicator() is wrong. This path would be invoked only in the case of an initialization failure. Signed-off-by:
-
Adrian McMenamin authored
Updates the 8139too driver to work with recently added (a724605c) declared coherent memory patch for the Dreamcast. Signed-off-by:
Adrian McMenamin <adrian@mcmen.demon.co.uk> Signed-off-by:
-
Alan Cox authored
To kill the volatiles also switch it to stop poking ISA memory directly without going through readb and friends. Signed-off-by:
Alan Cox <alan@redhat.com> Signed-off-by:
-
Don Fry authored
Signed-off-by:
Joe Perches <joe@perches.com> Acked-by:
Don Fry <pcnet32@verizon.net> Signed-off-by:
-
Don Fry authored
Change hard coded 2 to NET_IP_ALIGN. Added new #define with comments. Tested amd_64 Signed-off-by:
-
- 10 Feb, 2008 25 commits
-
-
Linus Torvalds authored
.. and I really need to call it something else. Maybe it is time to bring back the weasel series, since weasels always make me feel good about a kernel.
-
Linus Torvalds authored
* 'for-linus' of master.kernel.org:/home/rmk/linux-2.6-arm: (30 commits) [ARM] constify function pointer tables [ARM] 4823/1: AT91 section fix [ARM] 4824/1: pxa: clear RDH bit after any reset [ARM] pxa: remove debugging PM: printk ARM: OMAP1: Misc clean-up ARM: OMAP1: Update defconfigs for omap1 ARM: OMAP1: Palm Tungsten E board clean-up ARM: OMAP1: Use I2C bus registration helper for omap1 ARM: OMAP1: Remove omap_sram_idle() ARM: OMAP1: PM fixes for OMAP1 ARM: OMAP1: Use MMC multislot structures for Siemens SX1 board ARM: OMAP1: Make omap1 use MMC multislot structures ARM: OMAP1: Change the comments to C style ARM: OMAP1: Make omap1 boards to use omap_nand_platform_data ARM: OMAP: Add helper module for board specific I2C bus registration ARM: OMAP: Add dmtimer support for OMAP3 ARM: OMAP: Pre-3430 clean-up for dmtimer.c ARM: OMAP: Add DMA support for chaining and 3430 ARM: OMAP: Add 24xx GPIO debounce support ARM: OMAP: Get rid of unnecessary ifdefs in GPIO code ...
-
Matthew Wilcox authored
We want to allow different implementations of pci_raw_ops for standard and extended config space on x86. Rather than clutter generic code with knowledge of this, we make pci_raw_ops private to x86 and use it to implement the new raw interface -- raw_pci_read() and raw_pci_write(). Signed-off-by:
Matthew Wilcox <willy@linux.intel.com> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
Ivan Kokshaysky authored
Thanks to Loic Prylli <loic@myri.com>, who originally proposed this idea. Always using legacy configuration mechanism for the legacy config space and extended mechanism (mmconf) for the extended config space is a simple and very logical approach. It's supposed to resolve all known mmconf problems. It still allows per-device quirks (tweaking dev->cfg_size). It also allows to get rid of mmconf fallback code. Signed-off-by:
Ivan Kokshaysky <ink@jurassic.park.msu.ru> Signed-off-by:
-
git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6Linus Torvalds authored
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6: [PKT_SCHED] ematch: Fix build warning.
-
git://git.kernel.org/pub/scm/linux/kernel/git/tglx/linux-2.6-hrtLinus Torvalds authored
* git://git.kernel.org/pub/scm/linux/kernel/git/tglx/linux-2.6-hrt: hrtimer: don't modify restart_block->fn in restart functions hrtimer: fix *rmtp/restarts handling in compat_sys_nanosleep() hrtimer: fix *rmtp handling in hrtimer_nanosleep() ntp: correct inconsistent interval/tick_length usage
-
Bastian Blank authored
Commit 8811930d ("splice: missing user pointer access verification") added the proper access_ok() calls to copy_from_user_mmap_sem() which ensures we can copy the struct iovecs from userspace to the kernel. But we also must check whether we can access the actual memory region pointed to by the struct iovec to fix the access checks properly. Signed-off-by:
Bastian Blank <waldi@debian.org> Acked-by:
Oliver Pinter <oliver.pntr@gmail.com> Cc: Jens Axboe <jens.axboe@oracle.com> Cc: Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Pekka Enberg <penberg@cs.helsinki.fi> Signed-off-by:
-
David S. Miller authored
Commit 954415e3 ("[PKT_SCHED] ematch: tcf_em_destroy robustness") removed a cast on em->data when passing it to kfree(), but em->data is an integer type that can hold pointers as well as other values so the cast is necessary. Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Oleg Nesterov authored
hrtimer_nanosleep_restart() clears/restores restart_block->fn. This is pointless and complicates its usage. Note that if sys_restart_syscall() doesn't actually happen, we have a bogus "pending" restart->fn anyway, this is harmless. Signed-off-by:
Oleg Nesterov <oleg@tv-sign.ru> Cc: Alexey Dobriyan <adobriyan@sw.ru> Cc: Pavel Emelyanov <xemul@sw.ru> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Toyo Abe <toyoa@mvista.com> Cc: Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Thomas Gleixner <tglx@linutronix.de>
-
Oleg Nesterov authored
Spotted by Pavel Emelyanov and Alexey Dobriyan. compat_sys_nanosleep() implicitly uses hrtimer_nanosleep_restart(), this can't work. Make a suitable compat_nanosleep_restart() helper. Introduced by commit c70878b4 hrtimer: hook compat_sys_nanosleep up to high res timer code Also, set ->addr_limit = KERNEL_DS before doing hrtimer_nanosleep(), this func was changed by the previous patch and now takes the "__user *" parameter. Thanks to Ingo Molnar for fixing the bug in this patch. Signed-off-by:
-
Oleg Nesterov authored
Spotted by Pavel Emelyanov and Alexey Dobriyan. hrtimer_nanosleep() sets restart_block->arg1 = rmtp, but this rmtp points to the local variable which lives in the caller's stack frame. This means that if sys_restart_syscall() actually happens and it is interrupted as well, we don't update the user-space variable, but write into the already dead stack frame. Introduced by commit 04c22714 hrtimer: Rework hrtimer_nanosleep to make sys_compat_nanosleep easier Change the callers to pass "__user *rmtp" to hrtimer_nanosleep(), and change hrtimer_nanosleep() to use copy_to_user() to actually update *rmtp. Small problem remains. man 2 nanosleep states that *rtmp should be written if nanosleep() was interrupted (it says nothing whether it is OK to update *rmtp if nanosleep returns 0), but (with or without this patch) we can dirty *rem even if nanosleep() returns 0. NOTE: this patch doesn't change compat_sys_nanosleep(), because it has other bugs. Fixed by the next patch. Signed-off-by:
-
john stultz authored
clocksource initialization and error accumulation. This corrects a 280ppm drift seen on some systems using acpi_pm, and affects other clocksources as well (likely to a lesser degree). Signed-off-by:
John Stultz <johnstul@us.ibm.com> Cc: Roman Zippel <zippel@linux-m68k.org> Cc: Steven Rostedt <rostedt@goodmis.org> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Ingo Molnar <mingo@elte.hu> Signed-off-by:
-
git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6Linus Torvalds authored
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6: (28 commits) [NET_SCHED] sch_htb: htb_requeue fix [IPV6]: Replace using the magic constant "1024" with IP6_RT_PRIO_USER for fc_metric. starfire: secton fix via-velocity: section fix natsemi: section fix typhoon: section fix isdn: fix section mismatch warning for ISACVer isdn: fix section mismatch warnings from hisax_cs_setup_card isdn: fix section mismatch warnings in isac.c and isar.c isdn: fix section mismatch warning in hfc_sx.c [PKT_SCHED] ematch: tcf_em_destroy robustness [PKT_SCHED]: deinline functions in meta match [SCTP]: Convert sctp_dbg_objcnt to seq files. [SCTP]: Use snmp_fold_field instead of a homebrew analogue. [IGMP]: Optimize kfree_skb in igmp_rcv. [KEY]: Convert net/pfkey to use seq files. [KEY]: Clean up proc files creation a bit. pppol2tp: fix printk warnings bnx2: section fix bnx2x: section fix ...
-
Jarek Poplawski authored
htb_requeue() enqueues skbs for which htb_classify() returns NULL. This is wrong because such skbs could be handled by NET_CLS_ACT code, and the decision could be different than earlier in htb_enqueue(). So htb_requeue() is changed to work and look more like htb_enqueue(). Signed-off-by:
Jarek Poplawski <jarkao2@gmail.com> Signed-off-by:
-
Rami Rosen authored
This patch replaces the explicit usage of the magic constant "1024" with IP6_RT_PRIO_USER in the IPV6 tree. Signed-off-by:
Rami Rosen <ramirose@gmail.com> Signed-off-by:
-
Andrew Morton authored
gcc-3.4.4 on powerpc: drivers/net/starfire.c:219: error: version causes a section type conflict Cc: Jeff Garzik <jeff@garzik.org> Cc: Sam Ravnborg <sam@ravnborg.org> Signed-off-by:
-
Andrew Morton authored
From: Andrew Morton <akpm@linux-foundation.org> gcc-3.4.4 on powerpc: drivers/net/via-velocity.c:443: error: chip_info_table causes a section type conflict on this one I had to remove the __devinitdata too. Don't know why. Cc: Jeff Garzik <jeff@garzik.org> Cc: Sam Ravnborg <sam@ravnborg.org> Signed-off-by:
-
Andrew Morton authored
gcc-3.4.4 on powerpc: drivers/net/natsemi.c:245: error: natsemi_pci_info causes a section type conflict Cc: Jeff Garzik <jeff@garzik.org> Cc: Sam Ravnborg <sam@ravnborg.org> Signed-off-by:
-
Andrew Morton authored
gcc-3.4.4 on powerpc: drivers/net/typhoon.c:137: error: version causes a section type conflict Cc: Jeff Garzik <jeff@garzik.org> Cc: Sam Ravnborg <sam@ravnborg.org> Signed-off-by:
-
git://git.kernel.org/pub/scm/linux/kernel/git/x86/linux-2.6-x86Linus Torvalds authored
* git://git.kernel.org/pub/scm/linux/kernel/git/x86/linux-2.6-x86: (32 commits) x86: cpa, strict range check in try_preserve_large_page() x86: cpa, enable CONFIG_DEBUG_PAGEALLOC on 64-bit x86: cpa, use page pool x86: introduce page pool in cpa x86: DEBUG_PAGEALLOC: enable after mem_init() brk: help text typo fix lguest: accept guest _PAGE_PWT page table entries x86 PM: update stale comments x86 PM: consolidate suspend and hibernation code x86 PM: rename 32-bit files in arch/x86/power x86 PM: move 64-bit hibernation files to arch/x86/power x86: trivial printk optimizations x86: fix early_ioremap pagetable ops x86: construct 32-bit boot time page tables in native format. x86, core: remove CONFIG_FORCED_INLINING x86: avoid unused variable warning in mm/init_64.c x86: fixup more paravirt fallout brk: document randomize_va_space and CONFIG_COMPAT_BRK (was Re: x86: fix sparse warnings in acpi/bus.c x86: fix sparse warning in topology.c ...
-
Sam Ravnborg authored
Fix following warnings: WARNING: drivers/isdn/hisax/built-in.o(.text+0x19723): Section mismatch in reference from the function ISACVersion() to the variable .devinit.data:ISACVer WARNING: drivers/isdn/hisax/built-in.o(.text+0x2005b): Section mismatch in reference from the function setup_avm_a1_pcmcia() to the function .devinit.text:setup_isac() ISACVer were only used from function annotated __devinit so add same annotation to ISACVer. One af the fererencing functions missed __devinit so add it and kill an additional warning. Signed-off-by:
Sam Ravnborg <sam@ravnborg.org> Acked-by:
Karsten Keil <kkeil@suse.de> Cc: Jeff Garzik <jgarzik@pobox.com> Signed-off-by:
-
Sam Ravnborg authored
Fix the following warnings: WARNING: drivers/isdn/hisax/built-in.o(.text+0x722): Section mismatch in reference from the function hisax_cs_setup_card() to the function .devinit.text:setup_teles3() WARNING: drivers/isdn/hisax/built-in.o(.text+0x72c): Section mismatch in reference from the function hisax_cs_setup_card() to the function .devinit.text:setup_s0box() WARNING: drivers/isdn/hisax/built-in.o(.text+0x736): Section mismatch in reference from the function hisax_cs_setup_card() to the function .devinit.text:setup_telespci() WARNING: drivers/isdn/hisax/built-in.o(.text+0x747): Section mismatch in reference from the function hisax_cs_setup_card() to the function .devinit.text:setup_avm_pcipnp() WARNING: drivers/isdn/hisax/built-in.o(.text+0x74e): Section mismatch in reference from the function hisax_cs_setup_card() to the function .devinit.text:setup_elsa() WARNING: drivers/isdn/hisax/built-in.o(.text+0x755): Section mismatch in reference from the function hisax_cs_setup_card() to the function .devinit.text:setup_diva() WARNING: drivers/isdn/hisax/built-in.o(.text+0x75c): Section mismatch in reference from the function hisax_cs_setup_card() to the function .devinit.text:setup_sedlbauer() WARNING: drivers/isdn/hisax/built-in.o(.text+0x763): Section mismatch in reference from the function hisax_cs_setup_card() to the function .devinit.text:setup_netjet_s() WARNING: drivers/isdn/hisax/built-in.o(.text+0x76a): Section mismatch in reference from the function hisax_cs_setup_card() to the function .devinit.text:setup_hfcpci() WARNING: drivers/isdn/hisax/built-in.o(.text+0x771): Section mismatch in reference from the function hisax_cs_setup_card() to the function .devinit.text:setup_hfcsx() WARNING: drivers/isdn/hisax/built-in.o(.text+0x778): Section mismatch in reference from the function hisax_cs_setup_card() to the function .devinit.text:setup_niccy() WARNING: drivers/isdn/hisax/built-in.o(.text+0x77f): Section mismatch in reference from the function hisax_cs_setup_card() to the function .devinit.text:setup_bkm_a4t() WARNING: drivers/isdn/hisax/built-in.o(.text+0x786): Section mismatch in reference from the function hisax_cs_setup_card() to the function .devinit.text:setup_sct_quadro() WARNING: drivers/isdn/hisax/built-in.o(.text+0x78d): Section mismatch in reference from the function hisax_cs_setup_card() to the function .devinit.text:setup_gazel() WARNING: drivers/isdn/hisax/built-in.o(.text+0x794): Section mismatch in reference from the function hisax_cs_setup_card() to the function .devinit.text:setup_w6692() WARNING: drivers/isdn/hisax/built-in.o(.text+0x79b): Section mismatch in reference from the function hisax_cs_setup_card() to the function .devinit.text:setup_netjet_u() WARNING: drivers/isdn/hisax/built-in.o(.text+0x7a2): Section mismatch in reference from the function hisax_cs_setup_card() to the function .devinit.text:setup_enternow_pci() checkcard() are the only user of hisax_cs_setup_card(). And checkcard is only used during init or when hot plugging ISDN devices. So annotate hisax_cs_setup_card() with __devinit. checkcard() is used by exported functions so it cannot be annotated __devinit. Annotate it with __ref so modpost ignore references to _devinit section. Signed-off-by:
-
git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc-2.6Linus Torvalds authored
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc-2.6: (24 commits) [SPARC]: Add solaris/sunos binary support to feature removal schedule. [SPARC]: Merge asm-sparc{,64}/a.out.h [SPARC]: Merge asm-sparc{,64}/fb.h [SPARC]: Merge asm-sparc{,64}/errno.h [SPARC]: Merge asm-sparc{,64}/emergency-restart.h [SPARC]: Merge asm-sparc{,64}/div64.h [SPARC]: Merge asm-sparc{,64}/device.h [SPARC]: Merge asm-sparc{,64}/current.h [SPARC]: Merge asm-sparc{,64}/cputime.h [SPARC]: Merge asm-sparc{,64}/cache.h [SPARC]: Merge asm-sparc{,64}/byteorder.h [SPARC]: Merge asm-sparc{,64}/bugs.h [SPARC]: Merge asm-sparc{,64}/bug.h [SPARC]: Kill BSD errno translation table and header files. [SPARC]: Merge asm-sparc{,64}/bpp.h [SPARC]: Merge include/asm-sparc{,64}/auxvec.h [SPARC]: Merge include/asm-sparc{,64}/of_device.h [SPARC]: Merge include/asm-sparc{,64}/prom.h [SPARC]: Remove of_platform_device_create [SPARC64]: Add kretprobe support. ...
-
Sam Ravnborg authored
Fix the following warnings: WARNING: drivers/isdn/hisax/built-in.o(.text+0x1b276): Section mismatch in reference from the function inithscxisac() to the function .devinit.text:clear_pending_isac_ints() WARNING: drivers/isdn/hisax/built-in.o(.text+0x1b286): Section mismatch in reference from the function inithscxisac() to the function .devinit.text:initisac() WARNING: drivers/isdn/hisax/built-in.o(.text+0x1fec7): Section mismatch in reference from the function AVM_card_msg() to the function .devinit.text:clear_pending_isac_ints() WARNING: drivers/isdn/hisax/built-in.o(.text+0x21669): Section mismatch in reference from the function AVM_card_msg() to the function .devinit.text:clear_pending_isac_ints() WARNING: drivers/isdn/hisax/built-in.o(.text+0x21671): Section mismatch in reference from the function AVM_card_msg() to the function .devinit.text:initisac() WARNING: drivers/isdn/hisax/built-in.o(.text+0x2991e): Section mismatch in reference from the function Sedl_card_msg() to the function .devinit.text:clear_pending_isac_ints() WARNING: drivers/isdn/hisax/built-in.o(.text+0x29936): Section mismatch in reference from the function Sedl_card_msg() to the function .devinit.text:initisac() WARNING: drivers/isdn/hisax/built-in.o(.text+0x2993e): Section mismatch in reference from the function Sedl_card_msg() to the function .devinit.text:initisar() WARNING: drivers/isdn/hisax/built-in.o(.text+0x2e026): Section mismatch in reference from the function NETjet_S_card_msg() to the function .devinit.text:clear_pending_isac_ints() WARNING: drivers/isdn/hisax/built-in.o(.text+0x2e02e): Section mismatch in reference from the function NETjet_S_card_msg() to the function .devinit.text:initisac() WARNING: drivers/isdn/hisax/built-in.o(.text+0x37813): Section mismatch in reference from the function BKM_card_msg() to the function .devinit.text:clear_pending_isac_ints() WARNING: drivers/isdn/hisax/built-in.o(.text+0x37823): Section mismatch in reference from the function BKM_card_msg() to the function .devinit.text:initisac() initisar(), initisac() and clear_pending_isac_ints() were all used via a cardmsg fnction - which may be called ouside __devinit context. So remove the bogus __devinit annotation of the above three functions to fix the warnings. Signed-off-by:
-
git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4Linus Torvalds authored
* 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4: ext4: Add new "development flag" to the ext4 filesystem ext4: Don't panic in case of corrupt bitmap ext4: allocate struct ext4_allocation_context from a kmem cache JBD2: Clear buffer_ordered flag for barried IO request on success ext4: Fix Direct I/O locking ext4: Fix circular locking dependency with migrate and rm. allow in-inode EAs on ext4 root inode ext4: Fix null bh pointer dereference in mballoc ext4: Don't set EXTENTS_FL flag for fast symlinks JBD2: Use the incompat macro for testing the incompat feature. jbd2: Fix reference counting on the journal commit block's buffer head [PATCH] jbd: Remove useless loop when writing commit record jbd2: Add error check to journal_wait_on_commit_record to avoid oops
-
