1. 07 Mar, 2014 1 commit
  2. 06 Mar, 2014 17 commits
  3. 05 Mar, 2014 2 commits
  4. 04 Mar, 2014 20 commits
    • Sathya Perla's avatar
      be2net: dma_sync each RX frag before passing it to the stack · e50287be
      Sathya Perla authored
      The driver currently maps a page for DMA, divides the page into multiple
      frags and posts them to the HW. It un-maps the page after data is received
      on all the frags of the page. This scheme doesn't work when bounce buffers
      are used for DMA (swiotlb=force kernel param).
      
      This patch fixes this problem by calling dma_sync_single_for_cpu() for each
      frag (excepting the last one) so that the data is copied from the bounce
      buffers. The page is un-mapped only when DMA finishes on the last frag of
      the page.
      (Thanks Ben H. for suggesting the dma_sync API!)
      
      This patch also renames the "last_page_user" field of be_rx_page_info{}
      struct to "last_frag" to improve readability of the fixed code.
      Reported-by: default avatarLi Fengmao <li.fengmao@zte.com.cn>
      Signed-off-by: default avatarSathya Perla <sathya.perla@emulex.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      e50287be
    • David S. Miller's avatar
      Merge branch 'mpls_tc' · 9e82e7f4
      David S. Miller authored
      Simon Wunderlich says:
      
      ====================
      this series contains a header file proposal for MPLS labels. These
      labels do not seem to be properly defined in the kernel so far. We are
      developing a wired/wireless 802.21/MPLS switch and need to check the
      MPLS labels to use the traffic control info for transmissions over
      802.11 networks.
      
      Changes to third version:
      
       * rename mpls_label_stack to mpls_label (thanks Neil)
       * fix over-indendented closing brac (thanks Sergei)
       * add Johannes' Ack
      ====================
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      9e82e7f4
    • Simon Wunderlich's avatar
      cfg80211: add MPLS and 802.21 classification · 960d97f9
      Simon Wunderlich authored
      MPLS labels may contain traffic control information, which should be
      evaluated and used by the wireless subsystem if present.
      
      Also check for IEEE 802.21 which is always network control traffic.
      Signed-off-by: default avatarSimon Wunderlich <sw@simonwunderlich.de>
      Signed-off-by: default avatarMathias Kretschmer <mathias.kretschmer@fokus.fraunhofer.de>
      Acked-by: default avatarJohannes Berg <johannes@sipsolutions.net>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      960d97f9
    • Simon Wunderlich's avatar
      UAPI: add MPLS label stack definition · f3baa393
      Simon Wunderlich authored
      Labels for the Multiprotocol Label Switching are defined in RFC 3032
      which was superseded by RFC 5462. Add the definition to UAPI and a stub
      header for include/linux.
      Signed-off-by: default avatarSimon Wunderlich <sw@simonwunderlich.de>
      Signed-off-by: default avatarMathias Kretschmer <mathias.kretschmer@fokus.fraunhofer.de>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      f3baa393
    • Simon Wunderlich's avatar
      if_ether.h: add IEEE 802.21 Ethertype · b62faf3c
      Simon Wunderlich authored
      Add the Ethertype for IEEE Std 802.21 - Media Independent Handover
      Protocol. This Ethertype is used for network control messages.
      Signed-off-by: default avatarSimon Wunderlich <sw@simonwunderlich.de>
      Signed-off-by: default avatarMathias Kretschmer <mathias.kretschmer@fokus.fraunhofer.de>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      b62faf3c
    • Linus Torvalds's avatar
      Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net · c3bebc71
      Linus Torvalds authored
      Pull networking fixes from David Miller:
      
       1) Fix memory leak in ieee80211_prep_connection(), sta_info leaked on
          error.  From Eytan Lifshitz.
      
       2) Unintentional switch case fallthrough in nft_reject_inet_eval(),
          from Patrick McHardy.
      
       3) Must check if payload lenth is a power of 2 in
          nft_payload_select_ops(), from Nikolay Aleksandrov.
      
       4) Fix mis-checksumming in xen-netfront driver, ip_hdr() is not in the
          correct place when we invoke skb_checksum_setup().  From Wei Liu.
      
       5) TUN driver should not advertise HW vlan offload features in
          vlan_features.  Fix from Fernando Luis Vazquez Cao.
      
       6) IPV6_VTI needs to select NET_IPV_TUNNEL to avoid build errors, fix
          from Steffen Klassert.
      
       7) Add missing locking in xfrm_migrade_state_find(), we must hold the
          per-namespace xfrm_state_lock while traversing the lists.  Fix from
          Steffen Klassert.
      
       8) Missing locking in ath9k driver, access to tid->sched must be done
          under ath_txq_lock().  Fix from Stanislaw Gruszka.
      
       9) Fix two bugs in TCP fastopen.  First respect the size argument given
          to tcp_sendmsg() in the fastopen path, and secondly prevent
          tcp_send_syn_data() from potentially using order-5 allocations.
          From Eric Dumazet.
      
      10) Fix handling of default neigh garbage collection params, from Jiri
          Pirko.
      
      11) Fix cwnd bloat and over-inflation of RTT when transmit segmentation
          is in use.  From Eric Dumazet.
      
      12) Missing initialization of Realtek r8169 driver's statistics
          seqlocks.  Fix from Kyle McMartin.
      
      13) Fix RTNL assertion failures in 802.3ad and AB ARP monitor of bonding
          driver, from Ding Tianhong.
      
      14) Bonding slave release race can cause divide by zero, fix from
          Nikolay Aleksandrov.
      
      15) Overzealous return from neigh_periodic_work() causes reachability
          time to not be computed.  Fix from Duain Jiong.
      
      16) Fix regression in ipv6_find_hdr(), it should not return -ENOENT when
          a specific target is specified and found.  From Hans Schillstrom.
      
      17) Fix VLAN tag stripping regression in BNA driver, from Ivan Vecera.
      
      18) Tail loss probe can calculate bogus RTTs due to missing packet
          marking on retransmit.  Fix from Yuchung Cheng.
      
      19) We cannot do skb_dst_drop() in iptunnel_pull_header() because
          multicast loopback detection in later code paths need access to
          skb_rtable().  Fix from Xin Long.
      
      20) The macvlan driver regresses in that it propagates lower device
          offload support disables into itself, causing severe slowdowns when
          running over a bridge.  Provide the software offloads always on
          macvlan devices to deal with this and the regression is gone.  From
          Vlad Yasevich.
      
      * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (103 commits)
        macvlan: Add support for 'always_on' offload features
        net: sctp: fix sctp_sf_do_5_1D_ce to verify if we/peer is AUTH capable
        ip_tunnel:multicast process cause panic due to skb->_skb_refdst NULL pointer
        net: cpsw: fix cpdma rx descriptor leak on down interface
        be2net: isolate TX workarounds not applicable to Skyhawk-R
        be2net: Fix skb double free in be_xmit_wrokarounds() failure path
        be2net: clear promiscuous bits in adapter->flags while disabling promiscuous mode
        be2net: Fix to reset transparent vlan tagging
        qlcnic: dcb: a couple off by one bugs
        tcp: fix bogus RTT on special retransmission
        hsr: off by one sanity check in hsr_register_frame_in()
        can: remove CAN FD compatibility for CAN 2.0 sockets
        can: flexcan: factor out soft reset into seperate funtion
        can: flexcan: flexcan_remove(): add missing netif_napi_del()
        can: flexcan: fix transition from and to freeze mode in chip_{,un}freeze
        can: flexcan: factor out transceiver {en,dis}able into seperate functions
        can: flexcan: fix transition from and to low power mode in chip_{en,dis}able
        can: flexcan: flexcan_open(): fix error path if flexcan_chip_start() fails
        can: flexcan: fix shutdown: first disable chip, then all interrupts
        USB AX88179/178A: Support D-Link DUB-1312
        ...
      c3bebc71
    • Linus Torvalds's avatar
      Merge tag 'regulator-v3.14-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator · 16e3f539
      Linus Torvalds authored
      Pull regulator fixes from Mark Brown:
       "A couple of fixes here which ensure that regulators using the core
        support for GPIO enables work in all cases by ensuring that helpers
        are used consistently rather than open coding in places and hence not
        having GPIO support in some of them"
      
      * tag 'regulator-v3.14-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator:
        regulator: core: Replace direct ops->disable usage
        regulator: core: Replace direct ops->enable usage
      16e3f539
    • Linus Torvalds's avatar
      Merge branch 'akpm' (patches from Andrew Morton) · 3f803abf
      Linus Torvalds authored
      Merge misc fixes from Andrew Morton.
      
      * emailed patches from Andrew Morton akpm@linux-foundation.org>:
        mm: page_alloc: exempt GFP_THISNODE allocations from zone fairness
        mm: numa: bugfix for LAST_CPUPID_NOT_IN_PAGE_FLAGS
        MAINTAINERS: add and correct types of some "T:" entries
        MAINTAINERS: use tab for separator
        rapidio/tsi721: fix tasklet termination in dma channel release
        hfsplus: fix remount issue
        zram: avoid null access when fail to alloc meta
        sh: prefix sh-specific "CCR" and "CCR2" by "SH_"
        ocfs2: fix quota file corruption
        drivers/rtc/rtc-s3c.c: fix incorrect way of save/restore of S3C2410_TICNT for TYPE_S3C64XX
        kallsyms: fix absolute addresses for kASLR
        scripts/gen_initramfs_list.sh: fix flags for initramfs LZ4 compression
        mm: include VM_MIXEDMAP flag in the VM_SPECIAL list to avoid m(un)locking
        memcg: reparent charges of children before processing parent
        memcg: fix endless loop in __mem_cgroup_iter_next()
        lib/radix-tree.c: swapoff tmpfs radix_tree: remember to rcu_read_unlock
        dma debug: account for cachelines and read-only mappings in overlap tracking
        mm: close PageTail race
        MAINTAINERS: EDAC: add Mauro and Borislav as interim patch collectors
      3f803abf
    • Johannes Weiner's avatar
      mm: page_alloc: exempt GFP_THISNODE allocations from zone fairness · 27329369
      Johannes Weiner authored
      Jan Stancek reports manual page migration encountering allocation
      failures after some pages when there is still plenty of memory free, and
      bisected the problem down to commit 81c0a2bb ("mm: page_alloc: fair
      zone allocator policy").
      
      The problem is that GFP_THISNODE obeys the zone fairness allocation
      batches on one hand, but doesn't reset them and wake kswapd on the other
      hand.  After a few of those allocations, the batches are exhausted and
      the allocations fail.
      
      Fixing this means either having GFP_THISNODE wake up kswapd, or
      GFP_THISNODE not participating in zone fairness at all.  The latter
      seems safer as an acute bugfix, we can clean up later.
      Reported-by: default avatarJan Stancek <jstancek@redhat.com>
      Signed-off-by: default avatarJohannes Weiner <hannes@cmpxchg.org>
      Acked-by: default avatarRik van Riel <riel@redhat.com>
      Acked-by: default avatarMel Gorman <mgorman@suse.de>
      Cc: <stable@kernel.org>		[3.12+]
      Signed-off-by: default avatarAndrew Morton <akpm@linux-foundation.org>
      Signed-off-by: default avatarLinus Torvalds <torvalds@linux-foundation.org>
      27329369
    • Liu Ping Fan's avatar
      mm: numa: bugfix for LAST_CPUPID_NOT_IN_PAGE_FLAGS · 1ae71d03
      Liu Ping Fan authored
      When doing some numa tests on powerpc, I triggered an oops bug.  I find
      it is caused by using page->_last_cpupid.  It should be initialized as
      "-1 & LAST_CPUPID_MASK", but not "-1".  Otherwise, in task_numa_fault(),
      we will miss the checking (last_cpupid == (-1 & LAST_CPUPID_MASK)).  And
      finally cause an oops bug in task_numa_group(), since the online cpu is
      less than possible cpu.  This happen with CONFIG_SPARSE_VMEMMAP disabled
      
      Call trace:
      
        SMP NR_CPUS=64 NUMA PowerNV
        Modules linked in:
        CPU: 24 PID: 804 Comm: systemd-udevd Not tainted3.13.0-rc1+ #32
        task: c000001e2746aa80 ti: c000001e32c50000 task.ti:c000001e32c50000
        REGS: c000001e32c53510 TRAP: 0300   Not tainted(3.13.0-rc1+)
        MSR: 9000000000009032 <SF,HV,EE,ME,IR,DR,RI>  CR:28024424  XER: 20000000
        CFAR: c000000000009324 DAR: 7265717569726857 DSISR:40000000 SOFTE: 1
        NIP  .task_numa_fault+0x1470/0x2370
        LR  .task_numa_fault+0x1468/0x2370
        Call Trace:
         .task_numa_fault+0x1468/0x2370 (unreliable)
         .do_numa_page+0x480/0x4a0
         .handle_mm_fault+0x4ec/0xc90
         .do_page_fault+0x3a8/0x890
         handle_page_fault+0x10/0x30
        Instruction dump:
        3c82fefb 3884b138 48d9cff1 60000000 48000574 3c62fefb3863af78 3c82fefb
        3884b138 48d9cfd5 60000000 e93f0100 <812902e4> 7d2907b45529063e 7d2a07b4
        ---[ end trace 15f2510da5ae07cf ]---
      Signed-off-by: default avatarLiu Ping Fan <pingfank@linux.vnet.ibm.com>
      Signed-off-by: default avatarAneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
      Acked-by: default avatarPeter Zijlstra <peterz@infradead.org>
      Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
      Cc: Paul Mackerras <paulus@samba.org>
      Cc: Mel Gorman <mel@csn.ul.ie>
      Signed-off-by: default avatarAndrew Morton <akpm@linux-foundation.org>
      Signed-off-by: default avatarLinus Torvalds <torvalds@linux-foundation.org>
      1ae71d03
    • Joe Perches's avatar
      MAINTAINERS: add and correct types of some "T:" entries · cea8321c
      Joe Perches authored
      Tree location entries should start with the appropriate type.
      
      Add git to some, hg to another.
      
      Neaten tree type description.
      Signed-off-by: default avatarJoe Perches <joe@perches.com>
      Signed-off-by: default avatarAndrew Morton <akpm@linux-foundation.org>
      Signed-off-by: default avatarLinus Torvalds <torvalds@linux-foundation.org>
      cea8321c
    • Joe Perches's avatar
      MAINTAINERS: use tab for separator · b75f0050
      Joe Perches authored
      Convert whitespace to single tab for separators.
      Signed-off-by: default avatarJoe Perches <joe@perches.com>
      Signed-off-by: default avatarAndrew Morton <akpm@linux-foundation.org>
      Signed-off-by: default avatarLinus Torvalds <torvalds@linux-foundation.org>
      b75f0050
    • Alexandre Bounine's avatar
      rapidio/tsi721: fix tasklet termination in dma channel release · 04379dff
      Alexandre Bounine authored
      This patch is a modification of the patch originally proposed by
      Xiaotian Feng <xtfeng@gmail.com>: https://lkml.org/lkml/2012/11/5/413
      This new version disables DMA channel interrupts and ensures that the
      tasklet wil not be scheduled again before calling tasklet_kill().
      
      Unfortunately the updated patch was not released at that time due to
      planned rework of Tsi721 mport driver to use threaded interrupts (which
      has yet to happen).  Recently the issue was reported again:
      https://lkml.org/lkml/2014/2/19/762.
      
      Description from the original Xiaotian's patch:
      
       "Some drivers use tasklet_disable in device remove/release process,
        tasklet_disable will inc tasklet->count and return.  If the tasklet is
        not handled yet under some softirq pressure, the tasklet will be
        placed on the tasklet_vec, never have a chance to be excuted.  This
        might lead to a heavy loaded ksoftirqd, wakeup with pending_softirq,
        but tasklet is disabled.  tasklet_kill should be used in this case."
      
      This patch is applicable to kernel versions starting from v3.5.
      Signed-off-by: default avatarAlexandre Bounine <alexandre.bounine@idt.com>
      Cc: Matt Porter <mporter@kernel.crashing.org>
      Cc: Xiaotian Feng <xtfeng@gmail.com>
      Reviewed-by: default avatarThomas Gleixner <tglx@linutronix.de>
      Cc: Mike Galbraith <bitbucket@online.de>
      Cc: <stable@vger.kernel.org>	[3.5+]
      Signed-off-by: default avatarAndrew Morton <akpm@linux-foundation.org>
      Signed-off-by: default avatarLinus Torvalds <torvalds@linux-foundation.org>
      04379dff
    • Vyacheslav Dubeyko's avatar
      hfsplus: fix remount issue · bd2c0035
      Vyacheslav Dubeyko authored
      Current implementation of HFS+ driver has small issue with remount
      option.  Namely, for example, you are unable to remount from RO mode
      into RW mode by means of command "mount -o remount,rw /dev/loop0
      /mnt/hfsplus".  Trying to execute sequence of commands results in an
      error message:
      
        mount /dev/loop0 /mnt/hfsplus
        mount -o remount,ro /dev/loop0 /mnt/hfsplus
        mount -o remount,rw /dev/loop0 /mnt/hfsplus
      
        mount: you must specify the filesystem type
      
        mount -t hfsplus -o remount,rw /dev/loop0 /mnt/hfsplus
      
        mount: /mnt/hfsplus not mounted or bad option
      
      The reason of such issue is failure of mount syscall:
      
        mount("/dev/loop0", "/mnt/hfsplus", 0x2282a60, MS_MGC_VAL|MS_REMOUNT, NULL) = -1 EINVAL (Invalid argument)
      
      Namely, hfsplus_parse_options_remount() method receives empty "input"
      argument and return false in such case.  As a result, hfsplus_remount()
      returns -EINVAL error code.
      
      This patch fixes the issue by means of return true for the case of empty
      "input" argument in hfsplus_parse_options_remount() method.
      Signed-off-by: default avatarVyacheslav Dubeyko <slava@dubeyko.com>
      Cc: Al Viro <viro@zeniv.linux.org.uk>
      Cc: Christoph Hellwig <hch@infradead.org>
      Signed-off-by: default avatarAndrew Morton <akpm@linux-foundation.org>
      Signed-off-by: default avatarLinus Torvalds <torvalds@linux-foundation.org>
      bd2c0035
    • Minchan Kim's avatar
      zram: avoid null access when fail to alloc meta · db5d711e
      Minchan Kim authored
      zram_meta_alloc could fail so caller should check it.  Otherwise, your
      system will hang.
      Signed-off-by: default avatarMinchan Kim <minchan@kernel.org>
      Acked-by: default avatarJerome Marchand <jmarchan@redhat.com>
      Cc: <stable@vger.kernel.org>
      Signed-off-by: default avatarAndrew Morton <akpm@linux-foundation.org>
      Signed-off-by: default avatarLinus Torvalds <torvalds@linux-foundation.org>
      db5d711e
    • Geert Uytterhoeven's avatar
      sh: prefix sh-specific "CCR" and "CCR2" by "SH_" · a5f6ea29
      Geert Uytterhoeven authored
      Commit bcf24e1d ("mmc: omap_hsmmc: use the generic config for
      omap2plus devices"), enabled the build for other platforms for compile
      testing.
      
      sh-allmodconfig now fails with:
      
          include/linux/omap-dma.h:171:8: error: expected identifier before numeric constant
          make[4]: *** [drivers/mmc/host/omap_hsmmc.o] Error 1
      
      This happens because SuperH #defines "CCR", which is one of the enum
      values in include/linux/omap-dma.h.  There's a similar issue with "CCR2"
      on sh2a.
      
      As "CCR" and "CCR2" are too generic names for global #defines, prefix
      them with "SH_" to fix this.
      Signed-off-by: default avatarGeert Uytterhoeven <geert@linux-m68k.org>
      Signed-off-by: default avatarAndrew Morton <akpm@linux-foundation.org>
      Signed-off-by: default avatarLinus Torvalds <torvalds@linux-foundation.org>
      a5f6ea29
    • Jan Kara's avatar
      ocfs2: fix quota file corruption · 15c34a76
      Jan Kara authored
      Global quota files are accessed from different nodes.  Thus we cannot
      cache offset of quota structure in the quota file after we drop our node
      reference count to it because after that moment quota structure may be
      freed and reallocated elsewhere by a different node resulting in
      corruption of quota file.
      
      Fix the problem by clearing dq_off when we are releasing dquot structure.
      We also remove the DB_READ_B handling because it is useless -
      DQ_ACTIVE_B is set iff DQ_READ_B is set.
      Signed-off-by: default avatarJan Kara <jack@suse.cz>
      Cc: Goldwyn Rodrigues <rgoldwyn@suse.de>
      Cc: Joel Becker <jlbec@evilplan.org>
      Reviewed-by: default avatarMark Fasheh <mfasheh@suse.de>
      Cc: <stable@vger.kernel.org>
      Signed-off-by: default avatarAndrew Morton <akpm@linux-foundation.org>
      Signed-off-by: default avatarLinus Torvalds <torvalds@linux-foundation.org>
      15c34a76
    • Vikas Sajjan's avatar
      drivers/rtc/rtc-s3c.c: fix incorrect way of save/restore of S3C2410_TICNT for TYPE_S3C64XX · 40d2d968
      Vikas Sajjan authored
      On exynos5250, exynos5420 and exynos5260 it was observed that, after 1
      cycle of S2R, the rtc-tick occurs at a very fast rate as compared to the
      rtc-tick occuring before S2R.
      
      This patch fixes the above issue by correcting the wrong way of
      save/restore of S3C2410_TICNT for TYPE_S3C64XX.
      Signed-off-by: default avatarVikas Sajjan <vikas.sajjan@samsung.com>
      Cc: Grant Likely <grant.likely@linaro.org>
      Cc: Rob Herring <robh+dt@kernel.org>
      Signed-off-by: default avatarAndrew Morton <akpm@linux-foundation.org>
      Signed-off-by: default avatarLinus Torvalds <torvalds@linux-foundation.org>
      40d2d968
    • Andy Honig's avatar
      kallsyms: fix absolute addresses for kASLR · 0f55159d
      Andy Honig authored
      Currently symbols that are absolute addresses are incorrectly displayed
      in /proc/kallsyms if the kernel is loaded with kASLR.
      
      The problem was that the scripts/kallsyms.c file which generates the
      array of symbol names and addresses uses an relocatable value for all
      symbols, even absolute symbols.  This patch fixes that.
      
      Several kallsyms output in different boot states for comparison:
      
        $ egrep '_(stext|_per_cpu_(start|end))' /root/kallsyms.nokaslr
        0000000000000000 D __per_cpu_start
        0000000000014280 D __per_cpu_end
        ffffffff810001c8 T _stext
        $ egrep '_(stext|_per_cpu_(start|end))' /root/kallsyms.kaslr1
        000000001f200000 D __per_cpu_start
        000000001f214280 D __per_cpu_end
        ffffffffa02001c8 T _stext
        $ egrep '_(stext|_per_cpu_(start|end))' /root/kallsyms.kaslr2
        000000000d400000 D __per_cpu_start
        000000000d414280 D __per_cpu_end
        ffffffff8e4001c8 T _stext
        $ egrep '_(stext|_per_cpu_(start|end))' /root/kallsyms.kaslr-fixed
        0000000000000000 D __per_cpu_start
        0000000000014280 D __per_cpu_end
        ffffffffadc001c8 T _stext
      Signed-off-by: default avatarAndy Honig <ahonig@google.com>
      Signed-off-by: default avatarKees Cook <keescook@chromium.org>
      Cc: Michal Marek <mmarek@suse.cz>
      Cc: Rusty Russell <rusty@rustcorp.com.au>
      Signed-off-by: default avatarAndrew Morton <akpm@linux-foundation.org>
      Signed-off-by: default avatarLinus Torvalds <torvalds@linux-foundation.org>
      0f55159d
    • Daniel M. Weeks's avatar
      scripts/gen_initramfs_list.sh: fix flags for initramfs LZ4 compression · 5ec384d4
      Daniel M. Weeks authored
      LZ4 as implemented in the kernel differs from the default method now
      used by the reference implementation of LZ4.  Until the in-kernel method
      is updated to support the new default, passing the legacy flag (-l) to
      the compressor is necessary.  Without this flag the kernel-generated,
      LZ4-compressed initramfs is junk.
      
      Kyungsik said:
      
      : It seems that lz4 supports legacy format with the same option as lz4c
      : does.  Just looking at the first few bytes of lz4 compressed image, we can
      : see whether it is new format or not.
      :
      : It shows new format magic number without this patch.  New format magic
      : number is 0x184d2204.
      :
      : $ hexdump -C ./initramfs_data.cpio.lz4 |more
      : 00000000  04 22 4d 18 64 70 b9 69 (Little Endian)
      : ...
      :
      : Currently kernel supports legacy format only.
      Signed-off-by: default avatarDaniel M. Weeks <dan@danweeks.net>
      Cc: Michal Marek <mmarek@suse.cz>
      Acked-by: default avatarKyungsik Lee <kyungsik.lee@lge.com>
      Signed-off-by: default avatarAndrew Morton <akpm@linux-foundation.org>
      Signed-off-by: default avatarLinus Torvalds <torvalds@linux-foundation.org>
      5ec384d4