- 01 Jul, 2011 20 commits
-
-
Ingo Molnar authored
Merge branch 'perf/core' of git://git.kernel.org/pub/scm/linux/kernel/git/frederic/random-tracing into perf/core
-
Avi Kivity authored
KVM needs one-shot samples, since a PMC programmed to -X will fire after X events and then again after 2^40 events (i.e. variable period). Signed-off-by:
Avi Kivity <avi@redhat.com> Signed-off-by:
Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/r/1309362157-6596-4-git-send-email-avi@redhat.comSigned-off-by:
Ingo Molnar <mingo@elte.hu>
-
Avi Kivity authored
The v1 PMU does not have any fixed counters. Using the v2 constraints, which do have fixed counters, causes an additional choice to be present in the weight calculation, but not when actually scheduling the event, leading to an event being not scheduled at all. Signed-off-by:
-
Avi Kivity authored
The perf_event overflow handler does not receive any caller-derived argument, so many callers need to resort to looking up the perf_event in their local data structure. This is ugly and doesn't scale if a single callback services many perf_events. Fix by adding a context parameter to perf_event_create_kernel_counter() (and derived hardware breakpoints APIs) and storing it in the perf_event. The field can be accessed from the callback as event->overflow_handler_context. All callers are updated. Signed-off-by:
-
Peter Zijlstra authored
Add a NODE level to the generic cache events which is used to measure local vs remote memory accesses. Like all other cache events, an ACCESS is HIT+MISS, if there is no way to distinguish between reads and writes do reads only etc.. The below needs filling out for !x86 (which I filled out with unsupported events). I'm fairly sure ARM can leave it like that since it doesn't strike me as an architecture that even has NUMA support. SH might have something since it does appear to have some NUMA bits. Sparc64, PowerPC and MIPS certainly want a good look there since they clearly are NUMA capable. Signed-off-by:
-
Peter Zijlstra authored
Since the OFFCORE registers are fully symmetric, try the other one when the specified one is already in use. Signed-off-by:
-
Stephane Eranian authored
This patch adds Intel Sandy Bridge offcore_response support by providing the low-level constraint table for those events. On Sandy Bridge, there are two offcore_response events. Each uses its own dedictated extra register. But those registers are NOT shared between sibling CPUs when HT is on unlike Nehalem/Westmere. They are always private to each CPU. But they still need to be controlled within an event group. All events within an event group must use the same value for the extra MSR. That's not controlled by the second patch in this series. Furthermore on Sandy Bridge, the offcore_response events have NO counter constraints contrary to what the official documentation indicates, so drop the events from the contraint table. Signed-off-by:
Stephane Eranian <eranian@google.com> Signed-off-by:
-
Stephane Eranian authored
The validate_group() function needs to validate events with extra shared regs. Within an event group, only events with the same value for the extra reg can co-exist. This was not checked by validate_group() because it was missing the shared_regs logic. This patch changes the allocation of the fake cpuc used for validation to also point to a fake shared_regs structure such that group events be properly testing. It modifies __intel_shared_reg_get_constraints() to use spin_lock_irqsave() to avoid lockdep issues. Signed-off-by:
-
Stephane Eranian authored
This patch improves the code managing the extra shared registers used for offcore_response events on Intel Nehalem/Westmere. The idea is to use static allocation instead of dynamic allocation. This simplifies greatly the get and put constraint routines for those events. The patch also renames per_core to shared_regs because the same data structure gets used whether or not HT is on. When HT is off, those events still need to coordination because they use a extra MSR that has to be shared within an event group. Signed-off-by:
-
Peter Zijlstra authored
Since only samples call perf_output_sample() its much saner (and more correct) to put the sample logic in there than in the perf_output_begin()/perf_output_end() pair. Saves a useless argument, reduces conditionals and shrinks struct perf_output_handle, win! Signed-off-by:
-
Peter Zijlstra authored
The nmi parameter indicated if we could do wakeups from the current context, if not, we would set some state and self-IPI and let the resulting interrupt do the wakeup. For the various event classes: - hardware: nmi=0; PMI is in fact an NMI or we run irq_work_run from the PMI-tail (ARM etc.) - tracepoint: nmi=0; since tracepoint could be from NMI context. - software: nmi=[0,1]; some, like the schedule thing cannot perform wakeups, and hence need 0. As one can see, there is very little nmi=1 usage, and the down-side of not using it is that on some platforms some software events can have a jiffy delay in wakeup (when arch_irq_work_raise isn't implemented). The up-side however is that we can remove the nmi parameter and save a bunch of conditionals in fast paths. Signed-off-by: -
Cyrill Gorcunov authored
Due to restriction and specifics of Netburst PMU we need a separated event for NMI watchdog. In particular every Netburst event consumes not just a counter and a config register, but also an additional ESCR register. Since ESCR registers are grouped upon counters (i.e. if ESCR is occupied for some event there is no room for another event to enter until its released) we need to pick up the "least" used ESCR (or the most available one) for nmi-watchdog purposes -- so MSR_P4_CRU_ESCR2/3 was chosen. With this patch nmi-watchdog and perf top should be able to run simultaneously. Signed-off-by:
Cyrill Gorcunov <gorcunov@openvz.org> CC: Lin Ming <ming.m.lin@intel.com> CC: Arnaldo Carvalho de Melo <acme@redhat.com> CC: Frederic Weisbecker <fweisbec@gmail.com> Tested-and-reviewed-by:
Don Zickus <dzickus@redhat.com> Tested-and-reviewed-by:
-
Eric B Munson authored
The event tracing infrastructure exposes two timers which should be updated each time the value of the counter is updated. Currently, these counters are only updated when userspace calls read() on the fd associated with an event. This means that counters which are read via the mmap'd page exclusively never have their timers updated. This patch adds ensures that the timers are updated each time the values in the mmap'd page are updated. Signed-off-by:
Eric B Munson <emunson@mgebm.net> Signed-off-by:
-
Eric B Munson authored
Take the timer calculation from perf_output_read and move it to a helper function for any place that needs timer values but cannot take the ctx->lock. Signed-off-by:
-
Eric B Munson authored
Signed-off-by:
-
Richard Kennedy authored
Reorder perf_event_context to remove 8 bytes of 64 bit alignment padding shrinking its size to 192 bytes, allowing it to fit into a smaller slab and use one fewer cache lines. Signed-off-by:
Richard Kennedy <richard@rsk.demon.co.uk> Signed-off-by:
-
Vince Weaver authored
Since 2.6.36 (specifically commit d57e34fd ("perf: Simplify the ring-buffer logic: make perf_buffer_alloc() do everything needed"), the perf_buffer_init_code() has been mis-setting the buffer watermark if perf_event_attr.wakeup_events has a non-zero value. This is because perf_event_attr.wakeup_events is a union with perf_event_attr.wakeup_watermark. This commit re-enables the check for perf_event_attr.watermark being set before continuing with setting a non-default watermark. This bug is most noticable when you are trying to use PERF_IOC_REFRESH with a value larger than one and perf_event_attr.wakeup_events is set to one. In this case the buffer watermark will be set to 1 and you will get extraneous POLL_IN overflows rather than POLL_HUP as expected. [ avoid using attr.wakeup_events when attr.watermark is set ] Signed-off-by:
Vince Weaver <vweaver1@eecs.utk.edu> Signed-off-by:
-
Peter Zijlstra authored
Commit e360adbe ("irq_work: Add generic hardirq context callbacks") fouled up the Alpha bit, not properly naming the arch specific function that raises the 'self-IPI'. Signed-off-by:
-
Peter Zijlstra authored
Commit e360adbe ("irq_work: Add generic hardirq context callbacks") fouled up the ppc bit, not properly naming the arch specific function that raises the 'self-IPI'. Cc: Huang Ying <ying.huang@intel.com> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Anton Blanchard <anton@samba.org> Cc: Eric B Munson <emunson@mgebm.net> Cc: stable@kernel.org # 37+ Signed-off-by:
-
Ingo Molnar authored
Merge reason: Pick up the latest fixes. Signed-off-by:
-
- 29 Jun, 2011 6 commits
-
-
Frederic Weisbecker authored
We don't need to display the parent field if the parent sorting machinery is only used for parent filtering (as in "-p foo"). However if parent filtering is used in combination with explicit parent sorting ( -s parent), we want to display it. Result with: perf report -p kernel_thread -s parent Before: # Overhead Parent symbol # ........ ............. # 0.07% | --- ioread8 ata_sff_check_status ata_sff_tf_load ata_sff_qc_issue ata_bmdma_qc_issue ata_qc_issue ata_scsi_translate ata_scsi_queuecmd scsi_dispatch_cmd scsi_request_fn __blk_run_queue __make_request generic_make_request submit_bio submit_bh journal_submit_commit_record jbd2_journal_commit_transaction kjournald2 kthread kernel_thread_helpe After: # Overhead Parent symbol # ........ ............. # 0.07% kernel_thread_helper | --- ioread8 ata_sff_check_status ata_sff_tf_load ata_sff_qc_issue ata_bmdma_qc_issue ata_qc_issue ata_scsi_translate ata_scsi_queuecmd scsi_dispatch_cmd scsi_request_fn __blk_run_queue __make_request generic_make_request submit_bio submit_bh journal_submit_commit_record jbd2_journal_commit_transaction kjournald2 kthread kernel_thread_helper Signed-off-by:Frederic Weisbecker <fweisbec@gmail.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Stephane Eranian <eranian@google.com> Cc: David Ahern <dsahern@gmail.com> Cc: Sam Liao <phyomh@gmail.com>
-
Frederic Weisbecker authored
So that the parent sort dimension can be registered twice: once if we add it as an explicit sort dimension (-s parent) and twice if we request a parent filter (-p foo). We'll have only one parent sort dimension in the end but this allows to override the default parent filter with we gave in "-p" option. The goal of this is to prepare to allow the use of "-s parent" and "-p foo" at the same time, ie: sort by filtered parent. Signed-off-by: -
Frederic Weisbecker authored
As for newt ui, don't display entries that have been marked as ignored. The practical current effect of this is to make parent filtering really working. Before, entries that were ignored were given a null parent but were still displayed. This resulted in some weird effects: # Overhead Command Shared Object Symbol # ........ ........... ................. ............ # ^A | --- __lock_acquire | |--95.97%-- lock_acquire | | | |--30.75%-- _raw_spin_lock Discard these from the stdio display. Signed-off-by: -
Frederic Weisbecker authored
These are probably some old leftovers. Signed-off-by: -
Frederic Weisbecker authored
These don't need to be globally visible. Signed-off-by: -
Sam Liao authored
Add "caller/callee" option to support inverted butterfly report, in the inverted report (with caller option), the call graph start from the callee's ancestor. Users can use such view to catch system's performance bottleneck from a sysprof like view. Using this option with specified sort order like pid gives us high level view of call graph statistics. Also add "-G" alias for inverted call graph. Signed-off-by:
Sam Liao <phyomh@gmail.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Stephane Eranian <eranian@google.com> Cc: David Ahern <dsahern@gmail.com> Signed-off-by:
-
- 28 Jun, 2011 14 commits
-
-
Linus Torvalds authored
-
Hugh Dickins authored
When auditing the locking in i915_gem.c (for a prospective change which I then abandoned), I noticed two places where struct_mutex is not held across GEM object manipulations that would usually require it. Since one is in initial setup and the other in driver unload, I'm guessing the mutex is not required for either; but post a patch in case it is. Signed-off-by:
Hugh Dickins <hughd@google.com> Cc: Chris Wilson <chris@chris-wilson.co.uk> Cc: Keith Packard <keithp@keithp.com> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
Hugh Dickins authored
The interface to ->truncate_range is changing very slightly: once "tmpfs: take control of its truncate_range" has been applied, this can be applied. For now there is only a slight inefficiency while this remains unapplied, but it will soon become essential for managing shmem's use of swap. Change i915_gem_object_truncate() to use shmem_truncate_range() directly: which should also spare i915 later change if we switch from inode_operations->truncate_range to file_operations->fallocate. Signed-off-by:
-
Hugh Dickins authored
Soon tmpfs will stop supporting ->readpage and read_cache_page_gfp(): once "tmpfs: add shmem_read_mapping_page_gfp" has been applied, this patch can be applied to ease the transition. Make i915_gem_object_get_pages_gtt() use shmem_read_mapping_page_gfp() in the one place it's needed; elsewhere use shmem_read_mapping_page(), with the mapping's gfp_mask properly initialized. Forget about __GFP_COLD: since tmpfs initializes its pages with memset, asking for a cold page is counter-productive. Include linux/shmem_fs.h also in drm_gem.c: with shmem_file_setup() now declared there too, we shall remove the prototype from linux/mm.h later. Signed-off-by:
-
Hugh Dickins authored
Soon tmpfs will stop supporting ->readpage and read_mapping_page(): once "tmpfs: add shmem_read_mapping_page_gfp" has been applied, this patch can be applied to ease the transition. ttm_tt_swapin() and ttm_tt_swapout() use shmem_read_mapping_page() in place of read_mapping_page(), since their swap_space has been created with shmem_file_setup(). Signed-off-by:
-
Andrew Morton authored
Fis the warning drivers/tty/serial/8250_pci.c:1457: warning: initialization from incompatible pointer type Cc: Greg KH <greg@kroah.com> Signed-off-by:
-
Ralf Baechle authored
Fix this section mismatch: WARNING: drivers/misc/ioc4.o(.data+0x144): Section mismatch in reference from the variable ioc4_load_modules_work to the function .devinit.text:ioc4_load_modules() The variable ioc4_load_modules_work references the function __devinit ioc4_load_modules() If the reference is valid then annotate the variable with __init* or __refdata (see linux/init.h) or name the variable: *driver, *_template, *_timer, *_sht, *_ops, *_probe, *_probe_one, *_console This one is potentially fatal; by the time ioc4_load_modules is invoked it may already have been freed. For that reason ioc4_load_modules_work can't be turned to __devinitdata but also because it's referenced in ioc4_exit. Signed-off-by:
Ralf Baechle <ralf@linux-mips.org> Acked-by:
Brent Casavant <bcasavan@sgi.com> Cc: Tejun Heo <tj@kernel.org> Signed-off-by:
-
Ralf Baechle authored
Fix this section mismatch: WARNING: drivers/leds/leds-lp5523.o(.text+0x12f4): Section mismatch in reference from the function lp5523_probe() to the function .init.text:lp5523_init_led() The function lp5523_probe() references the function __init lp5523_init_led(). This is often because lp5523_probe lacks a __init annotation or the annotation of lp5523_init_led is wrong. Fixing this one triggers one more mismatch, fix that one as well. Signed-off-by:
-
Ralf Baechle authored
Fix this section mismatch: WARNING: drivers/leds/leds-lp5521.o(.text+0xf2c): Section mismatch in reference from the function lp5521_probe() to the function .init.text:lp5521_init_led() The function lp5521_probe() references the function __init lp5521_init_led(). This is often because lp5521_probe lacks a __init annotation or the annotation of lp5521_init_led is wrong. Fixing this mismatch triggers one more mismatch, fix that one as well. Signed-off-by:
-
KAMEZAWA Hiroyuki authored
Commit d149e3b2 ("memcg: add the soft_limit reclaim in global direct reclaim") adds a softlimit hook to shrink_zones(). By this, soft limit is called as try_to_free_pages() do_try_to_free_pages() shrink_zones() mem_cgroup_soft_limit_reclaim() Then, direct reclaim is memcg softlimit hint aware, now. But, the memory cgroup's "limit" path can call softlimit shrinker. try_to_free_mem_cgroup_pages() do_try_to_free_pages() shrink_zones() mem_cgroup_soft_limit_reclaim() This will cause a global reclaim when a memcg hits limit. This is bug. soft_limit_reclaim() should be called when scanning_global_lru(sc) == true. And the commit adds a variable "total_scanned" for counting softlimit scanned pages....it's not "total". This patch removes the variable and update sc->nr_scanned instead of it. This will affect shrink_slab()'s scan condition but, global LRU is scanned by softlimit and I think this change makes sense. TODO: avoid too much scanning of a zone when softlimit did enough work. Signed-off-by:
KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp> Cc: Ying Han <yinghan@google.com> Cc: Michal Hocko <mhocko@suse.cz> Signed-off-by:
-
Vasiliy Kulikov authored
Currently a single process may register exit handlers unlimited times. It may lead to a bloated listeners chain and very slow process terminations. Eg after 10KK sent TASKSTATS_CMD_ATTR_REGISTER_CPUMASKs ~300 Mb of kernel memory is stolen for the handlers chain and "time id" shows 2-7 seconds instead of normal 0.003. It makes it possible to exhaust all kernel memory and to eat much of CPU time by triggerring numerous exits on a single CPU. The patch limits the number of times a single process may register itself on a single CPU to one. One little issue is kept unfixed - as taskstats_exit() is called before exit_files() in do_exit(), the orphaned listener entry (if it was not explicitly deregistered) is kept until the next someone's exit() and implicit deregistration in send_cpu_listeners(). So, if a process registered itself as a listener exits and the next spawned process gets the same pid, it would inherit taskstats attributes. Signed-off-by:
Vasiliy Kulikov <segooon@gmail.com> Cc: Balbir Singh <bsingharora@gmail.com> Cc: <stable@kernel.org> Signed-off-by:
-
Jan Kara authored
Under heavy memory and filesystem load, users observe the assertion mapping->nrpages == 0 in end_writeback() trigger. This can be caused by page reclaim reclaiming the last page from a mapping in the following race: CPU0 CPU1 ... shrink_page_list() __remove_mapping() __delete_from_page_cache() radix_tree_delete() evict_inode() truncate_inode_pages() truncate_inode_pages_range() pagevec_lookup() - finds nothing end_writeback() mapping->nrpages != 0 -> BUG page->mapping = NULL mapping->nrpages-- Fix the problem by doing a reliable check of mapping->nrpages under mapping->tree_lock in end_writeback(). Analyzed by Jay <jinshan.xiong@whamcloud.com>, lost in LKML, and dug out by Miklos Szeredi <mszeredi@suse.de>. Cc: Jay <jinshan.xiong@whamcloud.com> Cc: Miklos Szeredi <mszeredi@suse.de> Signed-off-by:Jan Kara <jack@suse.cz> Cc: <stable@kernel.org> Signed-off-by:
-
Peter Zijlstra authored
We cannot take a mutex while holding a spinlock, so flip the order and fix the locking documentation. Signed-off-by:
Andi Kleen <ak@linux.intel.com> Signed-off-by:
-
Josh Hunt authored
We observed the crash point count going negative in cases where the crash point is hit multiple times before the check of "count == 0" is done. Because of this we never call lkdtm_do_action(). This patch just adds a spinlock to protect count. Reported-by:
Tapan Dhimant <tdhimant@akamai.com> Signed-off-by:
Josh Hunt <johunt@akamai.com> Acked-by:
Ankita Garg <ankita@in.ibm.com> Cc: <stable@kernel.org> Signed-off-by:
-
