- 25 Nov, 2008 36 commits
-
-
Zhu, Yi authored
The patch rewrites the mac80211 configure_filter handler to better mapping mac80211 filter flags to iwlwifi hardware filter flags. We now can support 5 mac80211 filter flags: FIF_OTHER_BSS, FIF_ALLMULTI, FIF_PROMISC_IN_BSS, FIF_BCN_PRBRESP_PROMISC and FIF_CONTROL. This patch also avoids reconnecting if the filter flags are changed when the STA is associated. Because rx_assoc is used when full rxon is not necessary. Signed-off-by:
Zhu Yi <yi.zhu@intel.com> Signed-off-by:
Reinette Chatre <reinette.chatre@intel.com> Signed-off-by:
John W. Linville <linville@tuxdriver.com>
-
Abhijeet Kolekar authored
Patch fixes checkpatch.pl errors for iwlwifi. Signed-off-by:
Abhijeet Kolekar <abhijeet.kolekar@intel.com> Signed-off-by:
-
Chatre, Reinette authored
use IWL_CCK_RATES_MASK and IWL_OFDM_RATES_MASK instead of their values directly. Signed-off-by:
-
Tomas Winkler authored
This patch 1. Removes use once use only fc variables, they are useless after refactoring ieee80211 frame control handlers 2. Other trivial cleanups Signed-off-by:
Tomas Winkler <tomas.winkler@intel.com> Signed-off-by:
-
Tomas Winkler authored
This patch moves code around and group most of the station management code into iwl-sta.c No functional changes (yet) Signed-off-by:
-
Kolekar, Abhijeet authored
Patch aligns iwl3945_pci_probe with iwlwifi's iwl_pci_probe. Added few comments and code simplified to make readable. Signed-off-by:
-
Ivo van Doorn authored
The callback function write_tx_data() can only fail when our ENTRY_OWNER_DEVICE_DATA flag on a queue entry failed to determine the entry was not available and it is in fact still owned by the hardware. This means that if that function fails the queue must be stopped in mac80211. When rt2x00queue_get_queue() returns NULL in the TX path, it means mac80211 has passed us an invalid queue, although this should be impossible, it shouldn't hurt if we send mac80211 a signal to stop the queue either. Both issues can simply be resolved by removing their manual failure handler and making them use the failure path provided in rt2x00mac_tx(). Signed-off-by:
Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by:
-
Ivo van Doorn authored
rt2500usb and rt73usb have different register word sizes, for that reason the register access wrappers were never moved into rt2x00usb. With rt2800usb on its way, we should favor the 32bit register access and move those wrappers into rt2x00usb. That saves duplicate code, since only rt2500usb will need the special 16bit wrappers. Signed-off-by:
-
Ivo van Doorn authored
All code which accessed indirect registers was similar in respect to the for-loop, the given timeout, etc. Move it into a seperate function, which for PCI drivers can be moved into rt2x00pci. This allows us to cleanup the cleanup the code further by removing the goto statementsand making the codepath look a bit nicer. Signed-off-by:
-
Johannes Berg authored
Call the ath5k pci driver struct "ath5k" too to be less confusing in sysfs. Signed-off-by:
Johannes Berg <johannes@sipsolutions.net> Acked-by:
Nick Kossifidis <mickflemm@gmail.com> Signed-off-by:
-
David S. Miller authored
This reverts commit 4a3e8181. On request from Alan Cox. Signed-off-by:
David S. Miller <davem@davemloft.net>
-
David S. Miller authored
This reverts commit 52429eb2. On request from Alan Cox. Signed-off-by:
-
David S. Miller authored
This reverts commit 7ea3a9ad. On request from Alan Cox. Signed-off-by:
-
Alexey Dobriyan authored
Signed-off-by:
Alexey Dobriyan <adobriyan@gmail.com> Signed-off-by:
-
Alexey Dobriyan authored
struct will be kfreed in a moment, so... Signed-off-by:
-
Alexander Duyck authored
This change forces the bits to 0 by using an &= operation with an inverted mask of all options instead of using an |= with a value of 0. Signed-off-by:
Alexander Duyck <alexander.h.duyck@intel.com> Signed-off-by:
Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by:
-
Alexander Duyck authored
There is a reference to a Buffer Size extention bit that is unneded by 82575/82576 hardware. Since it is not needed it should be removed from the code. Signed-off-by:
-
Jeff Kirsher authored
Since the netlink option for DCB is necessary to actually be useful, simplified the Kconfig option. In addition, added useful help text for the Kconfig option. Signed-off-by:
-
Harvey Harrison authored
Add %pm to omit the colons when printing a mac address. Signed-off-by:
Harvey Harrison <harvey.harrison@gmail.com> Signed-off-by:
-
Denis Joseph Barrow authored
Made usb_drivers reset_resume function point to hso_resume this fixes problems a usb reset is done when the network interface is left idle for a few minutes. Possibly reset_resume should initialise hardware more but this works in the common case. Signed-off-by:
Denis Joseph Barrow <D.Barow@option.com> Signed-off-by:
-
Denis Joseph Barrow authored
Makes TIOCM ioctls for Data Carrier Detect & related functions work like /drivers/serial/serial-core.c potentially needed for pppd & similar user programs. Signed-off-by:
-
Denis Joseph Barrow authored
A new structure hso_mutex_table had to be declared statically & used as as hso_device mutex_lock(&serial->parent->mutex) etc is freed in hso_serial_open & hso_serial_close by kref_put while the mutex is still in use. This is a substantial change but should make the driver much stabler. Signed-off-by:
-
Denis Joseph Barrow authored
Added check for IFF_UP in hso_resume, this should eliminate -EINVAL (-22) errors caused from urb's being submitted twice, once by hso_resume & once in hso_net_open, if suspend/resume USB power saving mode is enabled Signed-off-by:
-
Denis Joseph Barrow authored
Moved serial_open_count in hso_serial_open to prevent crashes owing to the serial structure being made NULL when hso_serial_close is called even though hso_serial_open returned -ENODEV, Alan Cox pointed out this happens, also put in sanity check in hso_serial_close to check for a valid serial structure which should prevent the most reproducable crash in the driver when the hso device is disconnected while in use. Signed-off-by:
-
Denis Joseph Barrow authored
Signed-off-by:
-
Stephen Hemminger authored
As a concession to vendors who have to deal with one source for different kernel versions, add a HAVE_NET_DEVICE_OPS so they don't end up hard coding ifdef against kernel version. Signed-off-by:
Stephen Hemminger <shemminger@vyatta.com> Signed-off-by:
-
Ilpo Järvinen authored
This caused me to get repeatably: tcpdump: pcap_loop: recvfrom: Bad address Happens occassionally when I tcpdump my for-looped test xfers: while [ : ]; do echo -n "$(date '+%s.%N') "; ./sendfile; sleep 20; done Rest of the relevant commands: ethtool -K eth0 tso off tc qdisc add dev eth0 root netem drop 4% tcpdump -n -s0 -i eth0 -w sacklog.all Running net-next under kvm, connection goes to the same host (basically just out of kvm). The connection itself works ok and data gets sent without corruption even with a large number of tests while tcpdump fails usually within less than 5 tests. Whether it only happens because of this change or not, I don't know for sure but it's the only thing with which I've seen that error. The non-cloned variant works w/o it for much longer time. I'm yet to debug where the error actually comes from. Signed-off-by:
Ilpo Järvinen <ilpo.jarvinen@helsinki.fi> Signed-off-by:
-
Ilpo Järvinen authored
Signed-off-by:
-
Ilpo Järvinen authored
The earlier version was just very basic one which is "playing safe" by always clearing the hints. However, clearing of a hint is extremely costly operation with large windows, so it must be avoided at all cost whenever possible, there is a way with shifting too achieve not-clearing. Signed-off-by:
-
Ilpo Järvinen authored
During SACK processing, most of the benefits of TSO are eaten by the SACK blocks that one-by-one fragment SKBs to MSS sized chunks. Then we're in problems when cleanup work for them has to be done when a large cumulative ACK comes. Try to return back to pre-split state already while more and more SACK info gets discovered by combining newly discovered SACK areas with the previous skb if that's SACKed as well. This approach has a number of benefits: 1) The processing overhead is spread more equally over the RTT 2) Write queue has less skbs to process (affect everything which has to walk in the queue past the sacked areas) 3) Write queue is consistent whole the time, so no other parts of TCP has to be aware of this (this was not the case with some other approach that was, well, quite intrusive all around). 4) Clean_rtx_queue can release most of the pages using single put_page instead of previous PAGE_SIZE/mss+1 calls In case a hole is fully filled by the new SACK block, we attempt to combine the next skb too which allows construction of skbs that are even larger than what tso split them to and it handles hole per on every nth patterns that often occur during slow start overshoot pretty nicely. Though this to be really useful also a retransmission would have to get lost since cumulative ACKs advance one hole at a time in the most typical case. TODO: handle upwards only merging. That should be rather easy when segment is fully sacked but I'm leaving that as future work item (it won't make very large difference anyway since this current approach already covers quite a lot of normal cases). I was earlier thinking of some sophisticated way of tracking timestamps of the first and the last segment but later on realized that it won't be that necessary at all to store the timestamp of the last segment. The cases that can occur are basically either: 1) ambiguous => no sensible measurement can be taken anyway 2) non-ambiguous is due to reordering => having the timestamp of the last segment there is just skewing things more off than does some good since the ack got triggered by one of the holes (besides some substle issues that would make determining right hole/skb even harder problem). Anyway, it has nothing to do with this change then. I choose to route some abnormal looking cases with goto noop, some could be handled differently (eg., by stopping the walking at that skb but again). In general, they either shouldn't happen at all or are rare enough to make no difference in practice. In theory this change (as whole) could cause some macroscale regression (global) because of cache misses that are taken over the round-trip time but it gets very likely better because of much less (local) cache misses per other write queue walkers and the big recovery clearing cumulative ack. Worth to note that these benefits would be very easy to get also without TSO/GSO being on as long as the data is in pages so that we can merge them. Currently I won't let that happen because DSACK splitting at fragment that would mess up pcounts due to sk_can_gso in tcp_set_skb_tso_segs. Once DSACKs fragments gets avoided, we have some conditions that can be made less strict. TODO: I will probably have to convert the excessive pointer passing to struct sacktag_state... :-) My testing revealed that considerable amount of skbs couldn't be shifted because they were cloned (most likely still awaiting tx reclaim)... [The rest is considering future work instead since I got repeatably EFAULT to tcpdump's recvfrom when I added pskb_expand_head to deal with clones, so I separated that into another, later patch] ...To counter that, I gave up on the fifth advantage: 5) When growing previous SACK block, less allocs for new skbs are done, basically a new alloc is needed only when new hole is detected and when the previous skb runs out of frags space ...which now only happens of if reclaim is fast enough to dispose the clone before the SACK block comes in (the window is RTT long), otherwise we'll have to alloc some. With clones being handled I got these numbers (will be somewhat worse without that), taken with fine-grained mibs: TCPSackShifted 398 TCPSackMerged 877 TCPSackShiftFallback 320 TCPSACKCOLLAPSEFALLBACKGSO 0 TCPSACKCOLLAPSEFALLBACKSKBBITS 0 TCPSACKCOLLAPSEFALLBACKSKBDATA 0 TCPSACKCOLLAPSEFALLBACKBELOW 0 TCPSACKCOLLAPSEFALLBACKFIRST 1 TCPSACKCOLLAPSEFALLBACKPREVBITS 318 TCPSACKCOLLAPSEFALLBACKMSS 1 TCPSACKCOLLAPSEFALLBACKNOHEAD 0 TCPSACKCOLLAPSEFALLBACKSHIFT 0 TCPSACKCOLLAPSENOOPSEQ 0 TCPSACKCOLLAPSENOOPSMALLPCOUNT 0 TCPSACKCOLLAPSENOOPSMALLLEN 0 TCPSACKCOLLAPSEHOLE 12 Signed-off-by: -
Ilpo Järvinen authored
This is preparatory work for SACK combiner patch which may have to count TCP state changes for only a part of the skb because it will intentionally avoids splitting skb to SACKed and not sacked parts. Signed-off-by:
-
Ilpo Järvinen authored
Sadly enough, this adds possible divide though we try to avoid it by checking one mss as common case. Signed-off-by:
-
Ilpo Järvinen authored
I knew already when rewriting the sacktag that this condition was too conservative, change it now since it prevent lot of useless work (especially in the sack shifter decision code that is being added by a later patch). This shouldn't change anything really, just save some processing regardless of the shifter. Signed-off-by:
-
Ilpo Järvinen authored
Signed-off-by:
-
Ilpo Järvinen authored
I always had thought that collapsing up to two at a time was intentional decision to avoid excessive processing if 1 byte sized skbs are to be combined for a full mtu, and consecutive retransmissions would make the size of the retransmittee double each round anyway, but some recent discussion made me to understand that was not the case. Thus make collapse work more and wait less. It would be possible to take advantage of the shifting machinery (added in the later patch) in the case of paged data but that can be implemented on top of this change. tcp_skb_is_last check is now provided by the loop. I tested a bit (ss-after-idle-off, fill 4096x4096B xfer, 10s sleep + 4096 x 1byte writes while dropping them for some a while with netem): . 16774097:16775545(1448) ack 1 win 46 . 16775545:16776993(1448) ack 1 win 46 . ack 16759617 win 2399 P 16776993:16777217(224) ack 1 win 46 . ack 16762513 win 2399 . ack 16765409 win 2399 . ack 16768305 win 2399 . ack 16771201 win 2399 . ack 16774097 win 2399 . ack 16776993 win 2399 . ack 16777217 win 2399 P 16777217:16777257(40) ack 1 win 46 . ack 16777257 win 2399 P 16777257:16778705(1448) ack 1 win 46 P 16778705:16780153(1448) ack 1 win 46 FP 16780153:16781313(1160) ack 1 win 46 . ack 16778705 win 2399 . ack 16780153 win 2399 F 1:1(0) ack 16781314 win 2399 While without drop-all period I get this: . 16773585:16775033(1448) ack 1 win 46 . ack 16764897 win 9367 . ack 16767793 win 9367 . ack 16770689 win 9367 . ack 16773585 win 9367 . 16775033:16776481(1448) ack 1 win 46 P 16776481:16777217(736) ack 1 win 46 . ack 16776481 win 9367 . ack 16777217 win 9367 P 16777217:16777218(1) ack 1 win 46 P 16777218:16777219(1) ack 1 win 46 P 16777219:16777220(1) ack 1 win 46 ... P 16777247:16777248(1) ack 1 win 46 . ack 16777218 win 9367 . ack 16777219 win 9367 ... . ack 16777233 win 9367 . ack 16777248 win 9367 P 16777248:16778696(1448) ack 1 win 46 P 16778696:16780144(1448) ack 1 win 46 FP 16780144:16781313(1169) ack 1 win 46 . ack 16780144 win 9367 F 1:1(0) ack 16781314 win 9367 The window seems to be 30-40 segments, which were successfully combined into: P 16777217:16777257(40) ack 1 win 46 Signed-off-by:
-
Eric Dumazet authored
We can reduce pressure on dst entry refcount that slowdown UDP transmit path on SMP machines. This pressure is visible on RTP servers when delivering content to mediagateways, especially big ones, handling thousand of streams. Several cpus send UDP frames to the same destination, hence use the same dst entry. This patch makes ip_push_pending_frames() steal the refcount its callers had to take when filling inet->cork.dst. This doesnt avoid all refcounting, but still gives speedups on SMP, on UDP/RAW transmit path. Signed-off-by:
Eric Dumazet <dada1@cosmosbay.com> Signed-off-by:
-
- 24 Nov, 2008 4 commits
-
-
Eric Dumazet authored
We can reduce pressure on dst entry refcount that slowdown UDP transmit path on SMP machines. This pressure is visible on RTP servers when delivering content to mediagateways, especially big ones, handling thousand of streams. Several cpus send UDP frames to the same destination, hence use the same dst entry. This patch makes ip_append_data() eventually steal the refcount its callers had to take on the dst entry. This doesnt avoid all refcounting, but still gives speedups on SMP, on UDP/RAW transmit path Signed-off-by:
-
Jarek Poplawski authored
gen_kill_estimator() linear lists lookups are very slow, and e.g. while deleting a large number of HTB classes soft lockups were reported. Here is another try to fix this problem: this time internally, with rbtree, so similarly to Jamal's hashing idea IIRC. (Looking for next hits could be still optimized, but it's really fast as it is.) Reported-by:
Badalian Vyacheslav <slavon@bigtelecom.ru> Reported-by:
Denys Fedoryshchenko <denys@visp.net.lb> Signed-off-by:
Jarek Poplawski <jarkao2@gmail.com> Acked-by:
Jamal Hadi Salim <hadi@cyberus.ca> Signed-off-by:
-
Patrick McHardy authored
Jarek Poplawski points out: If all child qdiscs of sch_drr are non-work-conserving (e.g. sch_tbf) drr_dequeue() will busy-loop waiting for skbs instead of leaving the job for a watchdog. Checking for list_empty() in each loop isn't necessary either, because this can never be true except the first time. Using non-work-conserving qdiscs as children of DRR makes no sense, simply bail out in that case. Reported-by:
Patrick McHardy <kaber@trash.net> Signed-off-by:
-
Wang Chen authored
This use of netdev->priv is wrong. The right way is: alloc_netdev() with no memory for private data. make netdev->ml_priv to point to c2_dev. Signed-off-by:
Wang Chen <wangchen@cn.fujitsu.com> Acked-by:
Roland Dreier <rolandd@cisco.com> Signed-off-by:
-
