Root hubs should use 50 msec timeouts, not 10 msec.  This will
if nothing else eliminate some messages when using EHCI, which
insists on the whole timeout!

This resolves the slowdown Bernd Porr noticed, where rather a lot
of useless work got done.   It should apply to 2.4 too.

This updates the ehci periodic schedule dumping code to be
more useful when displaying the interrupt transfer tree:

  - includes start/complete split frame mask in QH
  - gets rid of some needless output (more terse)
  - shows whether IN or OUT tds are queued, and how many

The microframe info isn't yet very interesting, but it's
helpful when a microframe scheduler is in use.  (Which will
be a patch some other time!)

This been sitting in my queue for ages now ... it just
clarifies three points about unlink semantics.  Basically,

  - You can only unlink once per submission.

  - For synchronous unlink: urb completes, then unlink returns.

  - For async unlink: the order is unspecified; although usually
    the completion happens after unlink returns.

This is the third part of what used to be as66c.  The patch makes several
changes in the routines that handle unbinding and selecting altsettings
and configurations.

	Upon unbinding a driver, don't nuke all the URBs for the device
	-- only kill the ones on the driver's interface.  Afterwards,
	reinitialize the interface by selecting altsetting 0 (the
	default).

	When changing an altsetting, if the interface has only one
	altsetting it is allowed to STALL the request.  Attempt to carry
	out the equivalent initialization by clearing the HALT feature
	on each of the interface's endpoints.

	When changing configurations, mark each interface as being in
	altsetting 0.

	In general, use the new disable/enable routines instead of doing
	everything by hand.

This is the second part of what used to be as66c.  It fixes the
initialization of the debugging macros in core/message.c and adds routines
to enable/disable endpoints, interfaces, and entire devices.  The code
that _uses_ these routines will come in the next patch.

 # Initialize the debugging macros properly in message.c.
 #
 # Add usb_disable_endpoint(), usb_disable_interface(), usb_disable_device(),
 # usb_enable_endpoint(), and usb_enable_interface().

The is the first part of what used to be as66c.  It simply renames
usb_device_probe() and usb_device_remove() to usb_probe_interface() and
usb_unbind_interface().  And since they're not needed outside of usbcore,
it stops exporting them.

Here are updates to unusual_devs.h sent in by users.  They apply to both
2.4.22 and 2.6.0.

It fixes a few minor problems in the usbtest driver:

	Unlinks are done in the expected order, preventing some
	inappropriate error messages.

	The driver would wait for an URB to complete, even if the URB
	got an error on submission.

	There was a surprising memory leak: the driver didn't kfree()
	its private data structure.

The "automagic control completion" has been gone for some
time now, except for the documentation fixed in this patch.
It mentions the "deferred response" mode that's used when
some context (like a gadgetfs thread) other than the IRQ
handler is responding to control requests.

Wayne Wylupski sent some more PIDs (in a patch, but I've modified
it) for the ftdi_sio driver to the ftdi-usb-sio-devel list.  These
PIDs were for additional CrystalFontz LCD displays.

An earlier patch from David Glance for the DSS-20 SyncStation was
applied to the 2.6 tree.  This did not have a changelog entry in
the file header comment of ftdi_sio.c, so I have retroactively
added one in the attached patch.

This patch notes that users should get nfs-utils 1.0.5 (1.0.4 had a
memory usage bug), and tells them where to get it.

Here's another MIPS update.  The patch is huge because it completly
folds mips64 into mips, thereby eleminating 41010 lines of code.

Only bug fixes and making it compile again and a few minor features.
Also one security fix that got lost earlier

- Document boot options
- Better cpu local data
- Emulate FIOQSIZE
- Fix return value of 32bit ipccall
- Various minor style fixes
- Save some memory in apic tables
- Merge with 2.6.0test2/i386
- Readd ioport fix
- Sort exception tables at boot time
- Add local.h
- Fix for_each_cpu on UP
- Add utimes and tgkill system calls for 64bit
- Update defconfig

devfs_mk_cdev now only takes 3 parameters (dev_t, umode_t, fmt..), so
update this driver to the new API.

Time to update my CREDITS entry...

This patch updates the PowerMac cpufreq driver so that
it builds & works in current 2.6

This adds proper registration of CPUs on ppc32, without this, accesses
to cpufreq will oops.

[V4L] - set debug verbosity to 0 for both Hexium drivers
[V4L] - declare all local functions and variables static

[DVB] - Hand off all processing of urb data to a tasklet

[DVB] - correctly read MAC from eeprom on Technotrend and KNC1 cards

[DVB] - show i2c read errors only for registered frontends

[DVB] - if there are multiple adapters, bend the tuning frequency only if the adapters differ

[V4L] - make sure saa7146 module gets build for Hexium drivers
[V4L] - make Hexium drivers depend on the i2c layer
[DVB] - fix typo which prevented the mt312 driver from being build (obi <=> obj)

OSF partitions are mostly found on alpha machines.  It's been reported
that the partition numbering changed between 2.4 and 2.6.

This makes 2.6 use the 2.4 numbering scheme.

build error and warning fix
blkdev location cleanup
typo fix

H8S architecture support
signal handling problem fix
gcc-3.3 support
vfork/clone return value fix
added show_stack
build error and warning fix
blkdev location cleanup

used common header files
build error and warning fix
add include/asm-h8300/local.h and include/asm-h8300/sections.h

interrupt management update
target-support file update
gcc-3.3 support
blkdev location cleanup

config script fix
defconfig update
Makefile update
add H8S archtecture support

From Lou Langholtz <ldl@aros.net>

The queue_wait field of struct request_queue is not used anymore, and
this gets rid of it.

From Lou Langholtz <ldl@aros.net>

This fixes the behavior of blk_start_queue() so that request queues
really do start up again after blk_start_queue() is called (on queues
that were previously stopped via blk_stop_queue).

Fix a typo during last module refcounting fix.

into home.osdl.org:/home/torvalds/v2.5/linux

into home.osdl.org:/home/torvalds/v2.5/linux

into home.osdl.org:/home/torvalds/v2.5/linux

into home.osdl.org:/home/torvalds/v2.5/linux