- 11 Mar, 2016 40 commits
-
-
Mike Marciniszyn authored
This diagnostic capability was missed in the dual lock series. Signed-off-by:
Vennila Megavannan <vennila.megavannan@intel.com> Reviewed-by:
Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by:
Mike Marciniszyn <mike.marciniszyn@intel.com> Signed-off-by:
Doug Ledford <dledford@redhat.com>
-
Harish Chegondi authored
If SMI AH is not destroyed before de-allocating the PD, it would result in non-zero PD use count when de-allocating the PD, triggering a WARN_ON() at drivers/infiniband/core/verbs.c:284 ib_dealloc_pd+0x69/0xb0 [ib_core]() when unloading the qib driver on systems with dual-port card. This problem has always been there in qib and was detected only after the commit 7dd78647 ("IB/core: Make ib_dealloc_pd return void") introduced a WARN_ON in ib_dealloc_pd() that triggers if a PD's use count is non-zero before de-allocating the PD. Below is the call trace from the dmesg log. [ 7264.966129] Call Trace: [ 7264.969652] [<ffffffff81338470>] dump_stack+0x44/0x64 [ 7264.976181] [<ffffffff81086bb6>] warn_slowpath_common+0x86/0xc0 [ 7264.983656] [<ffffffff81086cfa>] warn_slowpath_null+0x1a/0x20 [ 7264.990961] [<ffffffffa025c2d9>] ib_dealloc_pd+0x69/0xb0 [ib_core] [ 7264.998717] [<ffffffffa0044de8>] ib_mad_port_close+0xb8/0x120 [ib_mad] [ 7265.006866] [<ffffffffa0044ebf>] ib_mad_remove_device+0x6f/0xc0 [ib_mad] [ 7265.015224] [<ffffffffa025fc87>] ib_unregister_device+0xa7/0x140 [ib_core] [ 7265.023738] [<ffffffffa04b5b79>] rvt_unregister_device+0x29/0x80 [rdmavt] [ 7265.032181] [<ffffffffa088d2a2>] qib_unregister_ib_device+0x22/0x210 [ib_qib] [ 7265.040993] [<ffffffffa085f73f>] qib_remove_one+0x1f/0x250 [ib_qib] [ 7265.048823] [<ffffffff8137a319>] pci_device_remove+0x39/0xc0 [ 7265.055984] [<ffffffff81466a1a>] __device_release_driver+0x9a/0x140 [ 7265.063821] [<ffffffff81466bc8>] driver_detach+0xb8/0xc0 [ 7265.070579] [<ffffffff81465a15>] bus_remove_driver+0x55/0xd0 [ 7265.077717] [<ffffffff8146732c>] driver_unregister+0x2c/0x50 [ 7265.084849] [<ffffffff813789ba>] pci_unregister_driver+0x2a/0x80 [ 7265.092366] [<ffffffffa08921bd>] qib_ib_cleanup+0x37/0x65 [ib_qib] [ 7265.100068] [<ffffffff811096d0>] SyS_delete_module+0x190/0x220 [ 7265.107379] [<ffffffff816a7bae>] entry_SYSCALL_64_fastpath+0x12/0x71 Reviewed-by:
Harish Chegondi <harish.chegondi@intel.com> Signed-off-by:
-
Dennis Dalessandro authored
Remove exported functions which are no longer required as the functionality has moved into rdmavt. This also requires re-ordering some of the functions since their prototype no longer appears in a header file. Rather than add forward declarations it is just cleaner to re-order some of the functions. Reviewed-by:
Jubin John <jubin.john@intel.com> Signed-off-by:
-
Dennis Dalessandro authored
Initially it was intended that rdmavt would support some signaling between the underlying driver and itself. However this turned out to be unnecessary for qib and hfi1. If we need to add something like this in later to support another driver we should do it then. As of now this essentially dead code so remove it. Reviewed-by:
Ira Weiny <ira.weiny@intel.com> Reviewed-by:
-
Dennis Dalessandro authored
While hfi1 and qib were still supporting bits and pieces of core verbs components there needed to be a way to convey if rdmavt should handle allocation and initialize of resources like the queue pair table. Now that all of this is moved into rdmavt there is no need for these flags. They are no longer used in the drivers. Reviewed-by:
-
Dennis Dalessandro authored
Rdmavt adopted an smi_ah from qib which is not needed by hfi1. Move this back to qib and get it out of the common library. Reviewed-by:
-
Dennis Dalessandro authored
Qib needs to be notified when mad agents are created and freed, there is some counter maintenance that needs to be performed. Add those callbacks at registration time with rdmavt. Reviewed-by:
-
Dennis Dalessandro authored
For each verb validate that all requirements for driver callbacks are met. If a function is called without checking for a valid pointer, it is a required function. Also document what each callback function does. Reviewed-by:
-
Dennis Dalessandro authored
Add, remove, and otherwise clean up existing comments that are leftover from the initial code postings of rdmavt. Many of the comments were added to provide an idea on the direction we were thinking of going. Now that the design is solidified make a pass over and clean everything up. Also add details where lacking. Ensure all non static functions have nano comments. Reviewed-by:
-
Kaike Wan authored
If an SL->SC mapping table change occurs after an RC/UC QP is created, there is no mechanism to change the SC nor the VL for that QP. The fix is to place the QP into error state so that ULP can recreate the QP with the new SL->SC mapping. Reviewed-by:
Kaike Wan <kaike.wan@intel.com> Signed-off-by:
-
Harish Chegondi authored
These trace and error print statements would help in debugging issues which are caused due to messed up QP ring buffer pointers. Reviewed-by:
-
Mike Marciniszyn authored
This patch adds an additional lock to reduce contention on the s_lock. This lock is used in post_send() so that the post_send is not serialized with the send engine and other send related processing. To do this the s_next_psn is now maintained on post_send() while post_send() related fields are moved to a new cache line. There is an s_avail maintained for the post_send() to mitigate trading cache lines with the send engine. The lock is released/acquired around releasing the just built packet to the egress mechanism. Reviewed-by:
Dean Luick <dean.luick@intel.com> Signed-off-by:
-
Harish Chegondi authored
This would avoid conflict with the functions in hfi1 that have similar names when both qib and hfi1 drivers are configured to be built into the kernel. This issue came up in the 0-day build report. Reviewed-by:
-
Vennila Megavannan authored
A busy_jiffies variable is maintained and updated when rc qps are created and deleted. busy_jiffies is a scaled value of the number of rc qps in the device. busy_jiffies is incremented every rc qp scaling interval. busy_jiffies is added to the rc timeout in add_retry_timer and mod_retry_timer. The rc qp scaling interval is selected based on extensive performance evaluation of targeted workloads. Reviewed-by:
-
Sebastian Sanchez authored
It prevents the LED from staying on when the QSFP module is not present. Reviewed-by:
Easwar Hariharan <easwar.hariharan@intel.com> Signed-off-by:
Sebastian Sanchez <sebastian.sanchez@intel.com> Signed-off-by:
-
Mike Marciniszyn authored
The patch series which added a new API for the RNR timer did not include an updated call in the loopback path. RC/UC RNR loopback would be broken without this. Reviewed-by:
-
Easwar Hariharan authored
Currently, the driver fails to tune the SerDes and therefore prevents link up if the configuration file is missing or fails parsing or validation. This patch adds a fallback option so that the 8051 is asked to tune for an unknown channel and possibly get the link up if tuning succeeds. It also adds a user-friendly message to update the configuration file if it is out-of-date. Reviewed-by:
-
Easwar Hariharan authored
The platform configuration data has been moved into the EFI variable store where it is populated by the HFI1 option ROM. This patch pulls the configuration data from the new location, retaining a fallback to request_firmware. Reviewed-by:
-
Hari Prasath Gujulan Elango authored
Replace the timer API's to initialize a timer & then assign the callback function by the setup_timer() API. Signed-off-by:
Hari Prasath Gujulan Elango <hgujulan@visteon.com> Signed-off-by:
-
Mike Marciniszyn authored
The field is a vestige from ipath. Reviewed-by:
-
Mike Marciniszyn authored
This patch is a prerequisite for adding a separate lock for post send. The timing of updating s_last needs to be before returning any send completion to avoid a race between a poll cq seeing a completion and the post send checking for a full queue. Reviewed-by:
-
Mike Marciniszyn authored
This patch is a prerequisite for adding a separate lock for post send. The timing of updating s_last needs to be before returning any send completion to avoid a race between a poll cq seeing a completion and the post send checking for a full queue. Reviewed-by:
-
Mike Marciniszyn authored
This is needed to debug ULP issues with getting retry attributes correctly specified. Reviewed-by:
-
Mike Marciniszyn authored
The qp->timeout field is duplicated in the seqfile print. Remove it. Reviewed-by:
-
Mike Marciniszyn authored
Use the new RNR timer for hfi1. For qib, this timer doesn't exist, so exploit driver callbacks to use the new timer as appropriate. Reviewed-by:
-
Mike Marciniszyn authored
Add a new rnr timer to hfi1. This allows for future optimizations having the retry and rnr timers separate. Reviewed-by:
-
Mike Marciniszyn authored
Use new timer API to optimize maintenance of timers during ACK processing. When we are still expecting ACKs, mod the timer to avoid a heavyweight delete/add. Otherwise, insure do_rc_ack() maintains the timer as it had. Reviewed-by:
-
Mike Marciniszyn authored
Use the new timer routines. Reviewed-by:
-
Mike Marciniszyn authored
Centralize disparate timer maintenance. This allow for central control and changes to the RC timer handling including future optimizations. Reviewed-by:
-
Sebastian Sanchez authored
It removes the unused struct hfi1_verbs_counters from verbs.h Reviewed-by:
-
Sebastian Sanchez authored
It enables access to counters in /sys/class/infiniband/hfi1_0/ports/1/counters by providing infrastructure when PMA queries occur. Counters symbol_error and VL15_dropped are not supported in OPA, therefore, 0 will always be returned. In addition, two common routines (pma_get_opa_port_dctrs, pma_get_opa_port_ectrs) were created to query counters to avoid code duplication. Reviewed-by:
-
Sebastian Sanchez authored
It replaces goto's for break and return statements in process_perf_opa(). Reviewed-by:
-
Sebastian Sanchez authored
This commit changes the data type for port_num in pma_get_opa_porterrors() from unsigned long to u8. Reviewed-by:
-
Mitko Haralanov authored
A race was discovred in the user SDMA code, which could result in an process being stuck in the kernel call indefinitely in certain error conditions. If, during the processing of a user SDMA request, there was an error *and* all outstanding SDMA descriptor had been completed by the time the that error case was handled in the calling function, the state of the packet queue would not get correctly updated resulting in the process subsequently getting stuck, thinking that there are more descriptors to be completed. To handle this scenario, the driver now checks the submitted packet count vs. the completed. If all submitted packets have also been completed, the driver can safely free the request and signal user level. Otherwise, this will be handled by the completion callback. Reviewed-by:
Mitko Haralanov <mitko.haralanov@intel.com> Signed-off-by:
-
Dean Luick authored
Remove unused nsbr count from PCIe Gen3 code Reviewed-by:
Stuart Summers <john.s.summers@intel.com> Signed-off-by:
-
Dean Luick authored
Add a variable eprom_available to each device, replacing the global of the same name. This is to allow multiple HFI devices with different EPROM availability to operate correctly on the the same system. Reviewed-by:
-
Sadanand Warrier authored
Add a new option to the snoop ioctl which allows credits to be allocated across all VLs. Previously only VL0 and VL15 had credits allocated. The new option used in the ioctl HFI1_SNOOP_IOCSET_OPTS allows credits to be allocated so that VL15 will have at least 8.5KB credits and the other VLs will have the rest of the credits divided equally across themselves. The total number of credits are stored in the upper 16 bits of the integer passed and the cumulative value should ensure that VL0 has at least 8.5KB and each VL a minimum of 2KB + 128 bytes Reviewed-by:
Sadanand Warrier <sadanand.warrier@intel.com> Signed-off-by:
-
Mitko Haralanov authored
To facilitate locked page counting, the user SDMA routines would maintain a list of io vectors, which were freed in the completion callback and then unpin the associated pages during the next call into the kernel. Since the size of this list was unbounded, doing this was bad for performance because the driver ended up spending too much time freeing the io vectors. This commit changes how the io vector freeing is done by moving the actual page unpinning in the callback and maintaining a count of unpinned pages. This count can then be used during the next call into the kernel to update the mm->pinned_vm variable (since that requires process context and the ability to sleep.) Reviewed-by:
-
Easwar Hariharan authored
LinkDownReason LocalMediaNotInstalled lacked an underscore and was inconsistent with other defines in the same family. This patch fixes this. Reviewed-by:
-
Harish Chegondi authored
Delete code from query_port which has been moved into rvt_query_port Create a call back function to shut down a port which may be called from rvt_modify_port Signed-off-by:
-
