- 29 Sep, 2015 40 commits
-
-
Christian Gromm authored
This patch simply corrects style violations. Signed-off-by:
Christian Gromm <christian.gromm@microchip.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Christian Gromm authored
This pathch moves the initialization of the PCM middle layer hardware parameters to function audio_set_hw_params(). Signed-off-by:
-
Christian Gromm authored
This patch renames the function audio_set_pcm_format(). Since the function doesn't only set the PCM format anymore and to guard against misunderstandings, its name needs to be changed. Signed-off-by:
-
Christian Gromm authored
This patch adds missing initialization of channel count for 8-bit mono audio resolution. Signed-off-by:
-
Christian Gromm authored
This patch purges a temp. variable to store the functions return value. Since the content is never being evaluated, it can safely be removed. Signed-off-by:
-
Christian Gromm authored
This patch removes debug messages and prevents the sound AIM from being noisy in kernel log. Signed-off-by:
-
Christian Gromm authored
Since the PCM interface's hardware parameters are channel/substream exclusive, the struct snd_pcm_hardware needs to be embedded in the channel structure. Signed-off-by:
-
Christian Gromm authored
This patch adds Microchip as vendor to the audio card's shortname to be displayed, when playback and capture devices are queried. Signed-off-by:
-
Christian Gromm authored
This patch adds 5.1 surround configuration with subbuffer cross-check, when establishing a link to the core. For the sake of simplicity, only one specific channel configuration is allowed. Signed-off-by:
-
Christian Gromm authored
The struct most_c_obj has the same set of attributes for each of two AIMs. This patch cleans up the code by introducing the new struct most_c_aim_obj hat contains those fields. Signed-off-by:
-
Christian Gromm authored
This patch ensures a fair distribution of buffers, when two AIMs share a single channel. The AIMs then won't be able to use more than half of all pre-allocated buffers of the linked channel. However, in case the channel is not shared, the AIM can exclusively use all available buffers. Signed-off-by:
Andrey Shvetsov <andrey.shvetsov@k2l.de> Signed-off-by:
-
Christian Gromm authored
The function drci_rd_reg() always delivers little endian representation of the 16-bit DCI register. The value returned by this function must always be carefully converted from __le16 to u16 type. This patch moves all those conversions to the function itself. Signed-off-by:
-
Christian Gromm authored
This patch is needed to avoid having DMA on the stack. Signed-off-by:
-
Christian Gromm authored
This patch simply rearranges code for better readability. Signed-off-by:
-
Christian Gromm authored
This patch fixes the representation of the MAC address within the HDM USB module. Signed-off-by:
-
Christian Gromm authored
This patch reduces the DBR buffer size to prevent an overflow in the DIM2 module. It is needed, because the MediaLB hardware has problems with DBR buffers that exceed the size of 255 messages. Signed-off-by:
-
Christian Gromm authored
This patch removes the wrongly used macros cpu_to_le16 Signed-off-by:
-
Christian Gromm authored
Revision D of OS81118 network interface controller have the internal buffer synchronization mechanism changed. This patch adapts the driver to this. Signed-off-by:
-
Christian Gromm authored
The case where the channel type is neither synchronous nor isochronous is already covered by a previous condition. Signed-off-by:
-
Christian Gromm authored
Since conf->extra_len has already been reset in most_start_channel() when function hdm_configure_channel() gets called, it can safely be removed here. Signed-off-by:
-
Christian Gromm authored
This patch fixes the opening and closing process of a physical channel when used by different AIMs. Signed-off-by:
-
Christian Gromm authored
This patch prevents the HDM USB from submitting an URB with a buffer size unaligned to 512 bytes to the USB subsystem. Signed-off-by:
-
Christian Gromm authored
Since there is no way find out whether the INIC has generated an interrupt, the I2C interrupt must not be registered as a shared interrupt. Reported-by:
PrasannaKumar Muralidharan <PrasannaKumar.Muraidharan@microchip.com> Signed-off-by:
-
Christian Gromm authored
If the network device is being opened right after it has been registered via function register_netdev(), the device state is not yet consistent in the context of function ndo_open(). This patch cares about having the initialization done right, before the networking device is registered. Signed-off-by:
-
Christian Gromm authored
This patch partly reverts a modification of function most_stop_channel() that is trying to reset an established link between an AIM and an HDM in all suitable places. But since the function most_stop_channel() is stopping the data transfer it is the wrong place to do so. Signed-off-by:
-
Christian Gromm authored
By applying this patch the initialization of the most_aim structure is performed at compile time. Signed-off-by:
-
Anish Bhatt authored
Remove all unused TCP_*_MASK macro definitions Signed-off-by:
Anish Bhatt <anish@gatech.edu> Signed-off-by:
-
Glen Lee authored
This patch removes variable cif_func and use mac_cfg directly. No need to have another pointer variable. Signed-off-by:
Glen Lee <glen.lee@atmel.com> Signed-off-by:
-
Glen Lee authored
This patch removes function pointer os_wait which is pointer of linux_wlan_lock_timeout and just call the real name function directly. Remove also static from linux_wlan_lock_timeout declaration. As os_wait is deleted, structure wilc_wlan_os_func_t is useless. Delete wilc_wlan_os_func_t, os_func and it's related codes. Signed-off-by:
-
Glen Lee authored
mutex txq_cs is never used in the driver. txq_cs, txq_critical_section and txq_lock have same pointer so just delete them and it's related codes. Signed-off-by:
-
Glen Lee authored
This patch removes two variables rx_buffer_size and use LINUX_RX_SIZE as argument. Signed-off-by:
-
Glen Lee authored
This patch removes unnecessary two variables tx_buffer_size and just use LINUX_TX_SIZE as argument. Signed-off-by:
-
Glen Lee authored
Remove hif_lock and hif_critical_section which are pointer of g_linux_wlan->hif_cs. Remove also it's related codes. Just use mutex varialbe g_linux_wlan->hif_cs. Signed-off-by:
-
Glen Lee authored
This patch removes txq_add_to_head_critical_section and txq_add_to_head_lock which are pointer of g_linux_wlan->txq_add_to_head_cs. Just use g_linux_wlan->txq_add_to_head_cs as argument of function. Signed-off-by:
-
Glen Lee authored
This patch removes cfg_wait and cfg_wait_event which are pointer of g_linux_wlan->cfg_event. No need to have pointer varialbe of it. Just use g_linux_wlan->cfg_event. Signed-off-by:
-
Glen Lee authored
Remove variable txq_wait and txq_wait_event which are pointer varialbe of g_linux_wlan->txq_event. No need to have extra pointer varialbe. Just use g_linux_wlan->txq_event. Remove os_context.txq_wait_event, txq_wait and it's related codes. Signed-off-by:
-
Glen Lee authored
Use mutex variable g_linux_wlan->rxq_cs instead of pointer varialbe. No need to make extra pointer variable for the mutex. Remove rxq_critical_section, rxq_lock and it's related codes. Signed-off-by:
-
Glen Lee authored
Use spinlock variable g_linux_wlan->txq_spinlock itself instead of g_wlan.txq_spinlock which is pointer of g_linux_wlan->txq_spinlock. Delete os_context.txq_spin_lock, g_wlan.txq_spinlock and it's related codes. Signed-off-by:
-
Glen Lee authored
This patch removes os_debug and call linux_wlan_dbg function instead of os_debug. Delete static from the linux_wlan_dbg. Signed-off-by:
-
Glen Lee authored
just call the function linux_wlan_rx_complete directly. No need for a pointer to the functions. Remove rx_complete, wilc_wlan_net_func_t and net_func which are not used anymore. Finally remove static from the function linux_wlan_rx_complete. Signed-off-by:
-
