- 31 Dec, 2005 3 commits
-
-
Linus Torvalds authored
-
Yi Yang authored
For the sysctl syscall, if the user wants to get the old value of a sysctl entry and set a new value for it in the same syscall, the old value is always overwritten by the new value if the sysctl entry is of string type and if the user sets its strategy to sysctl_string. This issue lies in the strategy being run twice if the strategy is set to sysctl_string, the general strategy sysctl_string always returns 0 if success. Such strategy routines as sysctl_jiffies and sysctl_jiffies_ms return 1 because they do read and write for the sysctl entry. The strategy routine sysctl_string return 0 although it actually read and write the sysctl entry. According to my analysis, if a strategy routine do read and write, it should return 1, if it just does some necessary check but not read and write, it should return 0, for example sysctl_intvec. Signed-off-by: Yi Yang <yang.y.yi@gmail.com> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
-
Linus Torvalds authored
If the string was too long to fit in the user-supplied buffer, the sysctl layer would zero-terminate it by writing past the end of the buffer. Don't do that. Noticed by Yi Yang <yang.y.yi@gmail.com> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
-
- 30 Dec, 2005 5 commits
-
-
Linus Torvalds authored
The old /proc interfaces were never updated to use loff_t, and are just generally broken. Now, we should be using the seq_file interface for all of the proc files, but converting the legacy functions is more work than most people care for and has little upside.. But at least we can make the non-LFS rules explicit, rather than just insanely wrapping the offset or something. Signed-off-by: Linus Torvalds <torvalds@osdl.org>
-
Denny Priebe authored
This patch fixes a typo introduced by conversion to dynamic input_dev allocation. Signed-off-by: Dmitry Torokhov <dtor@mail.ru> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
-
Dmitry Torokhov authored
This patch fixes a typo introduced by conversion to dynamic input_dev allocation. Signed-off-by: Dmitry Torokhov <dtor@mail.ru> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
-
Dmitry Torokhov authored
This patch fixes a typo introduced by conversion to dynamic input_dev allocation. Signed-off-by: Dmitry Torokhov <dtor@mail.ru> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
-
Erik Hovland authored
Patch from Erik Hovland This patch provides two changes. An indent is supplied for an if/else clause so that it is more readable. An acronym is incorrectly typed as UER when it should be IER. Signed-off-by: Erik Hovland <erik@hovland.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
-
- 29 Dec, 2005 14 commits
-
-
Jean Delvare authored
Thanks to Roman Zippel for the suggestion. Signed-off-by: Jean Delvare <khali@linux-fr.org> [ Short explanation: Kconfig uses ternary math: n/m/y, and !m is m ] Signed-off-by: Linus Torvalds <torvalds@osdl.org>
-
Linus Torvalds authored
This reverts the series of commits 67dbb4ea 281ab031 47807ce3 that changed the GART VM start offset. It fixed some machines, but seems to continually interact badly with some X versions. Quoth Ben Herrenschmidt: "So I think at this point, the best is that we keep the old bogus code that at least is consistent with the bug in the server. I'm working on a big patch to X that reworks the memory map stuff completely and fixes those issues on the server side, I'll do a DRM patch matching this X fix as well so that the memory map is only ever set in one place and with what I hope is a correct algorithm..." Signed-off-by: Linus Torvalds <torvalds@osdl.org>
-
Linus Torvalds authored
-
Linus Torvalds authored
-
Jean Delvare authored
Fix the cyclic dependency issue between CONFIG_SAA7134_ALSA and CONFIG_SAA7134_OSS (credits to Mauro Carvalho Chehab.) Signed-off-by: Jean Delvare <khali@linux-fr.org> Acked-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
-
Anton Blanchard authored
Sonny has noticed hotplug CPU on ppc64 is broken in 2.6.15-*. One of the problems is that htab_initialize_secondary is called when a cpu is being brought up, but it is marked __init. Signed-off-by: Anton Blanchard <anton@samba.org> Acked-by: Paul Mackerras <paulus@samba.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
-
Ravikiran G Thirumalai authored
Currently, we do not pass the correct start_pfn to e820_hole_size, to calculate holes. Following patch fixes that. The bug results in incorrect number of node_present_pages for each pgdat and causes ugly output in /sys and probably VM inbalances. Signed-off-by: Alok N Kataria <alokk@calsoftinc.com> Signed-off-by: Ravikiran Thirumalai <kiran@scalex86.org> Signed-off-by: Andi Kleen <ak@suse.de> Sighed-off-by: Shair Fultheim <shai@scalex86.org> Sighed-off-by: Linus Torvalds <torvalds@osdl.org>
-
Riccardo Magliocchetti authored
This patch fixes a typo introduced by conversion to dynamic input_dev allocation. Signed-off-by: Dmitry Torokhov <dtor@mail.ru> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
-
Dave Jones authored
__get_unaligned creates a typeof the var its passed, and writes to it, which on gcc4.1, spits out the following error: drivers/char/vc_screen.c: In function 'vcs_write': drivers/char/vc_screen.c:422: error: assignment of read-only variable 'val' Signed-off-by: Dave Jones <davej@redhat.com> [ The "right" fix would be to try to fix <asm-generic/unaligned.h> but that's hard to do with the tools gcc gives us. So this simpler patch is preferable -- Linus ] Signed-off-by: Linus Torvalds <torvalds@osdl.org>
-
Paolo 'Blaisorblade' Giarrusso authored
Fix UML compilation when SKAS mode is disabled. Indeed, we were compiling SKAS-only object files, which failed due to some SKAS-only headers being excluded from the search path. Thanks to the bug report from Pekka J Enberg. Acked-by: Pekka J Enberg <penberg (at) cs ! helsinki ! fi> Signed-off-by: Paolo 'Blaisorblade' Giarrusso <blaisorblade@yahoo.it> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
-
Paolo 'Blaisorblade' Giarrusso authored
Today, when compiling UML, I got warnings for two used unexported symbols: readdir64 and truncate64. Indeed, my glibc headers are aliasing readdir to readdir64 and truncate to truncate64 (and so on). I'm then adding additional exports. Since I've no idea if the symbols where always provided in the supported glibc's, I've added weak definitions too. Signed-off-by: Paolo 'Blaisorblade' Giarrusso <blaisorblade@yahoo.it> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
-
Paolo 'Blaisorblade' Giarrusso authored
Prevent page->index << PAGE_CACHE_SHIFT from overflowing. There is a casting there, but was added without care, so it's at the wrong place. Note the extra parens around the shift - "+" is higher precedence than "<<", leading to a GCC warning which saved all us. Signed-off-by: Paolo 'Blaisorblade' Giarrusso <blaisorblade@yahoo.it> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
-
Paolo 'Blaisorblade' Giarrusso authored
Trivial removal of unused variable from this file - doesn't even change the generated assembly code, in fact (gcc should trigger a warning for unused value here). Signed-off-by: Paolo 'Blaisorblade' Giarrusso <blaisorblade@yahoo.it> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
-
Paolo 'Blaisorblade' Giarrusso authored
Don't use printk() where "current_thread_info()" is crap. Until when we switch to running on init_stack, current_thread_info() evaluates to crap. Printk uses "current" at times (in detail, ¤t is evaluated with CONFIG_DEBUG_SPINLOCK to check the spinlock owner task). And this leads to random segmentation faults. Exactly, what happens is that ¤t = *(current_thread_info()), i.e. round down $esp and dereference the value. I.e. access the stack below $esp, which causes SIGSEGV on a VM_GROWSDOWN vma (see arch/i386/mm/fault.c). Signed-off-by: Paolo 'Blaisorblade' Giarrusso <blaisorblade@yahoo.it> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
-
- 28 Dec, 2005 6 commits
-
-
Linus Torvalds authored
-
David S. Miller authored
Noticed by Christophe Zimmerman, this explains the slow mouse movement with 2.6.x kernels. And checking the 2.4.x drivers/sbus/char/sunmouse.c driver shows we always used a 5-byte protocol with Sun mice in the past. I have no idea how the 3-byte thing got into the 2.6.x driver, but it's surely wrong. Signed-off-by: David S. Miller <davem@davemloft.net>
-
David S. Miller authored
Signed-off-by: David S. Miller <davem@davemloft.net>
-
David S. Miller authored
Signed-off-by: David S. Miller <davem@davemloft.net>
-
Chris Elmquist authored
Resubmitting after recommendation to use GET_REG32_1() instead of GET_REG32_LOOP(..., 1). Retested. Problem remains fixed. Prevent tg3_get_regs() from reading reserved and undocumented registers at RX_CPU_BASE and TX_CPU_BASE offsets which caused hostile behavior on PCIe platforms. Acked-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Benjamin Herrenschmidt authored
As reported by Jules Villard <jvillard@ens-lyon.fr> and some others, the recent GART aperture start reconfiguration causes problems on some setups. What I _think_ might be happening is that the X server is also trying to muck around with the card memory map and is forcing it back into a wrong setting that also happens to no longer match what the DRM wants to do and blows up. There are bugs all over the place in that code (and still some bugs in the DRM as well anyway). This patch attempts to avoid that by using the largest of the 2 values, which I think will cause it to behave as it used to for you and will still fix the problem with machines that have an aperture size smaller than the video memory. Acked-by: Jules Villard <jvillard@ens-lyon.fr> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
-
- 27 Dec, 2005 6 commits
-
-
David L Stevens authored
The below "jumbo" patch fixes the following problems in MLDv2. 1) Add necessary "ntohs" to recent "pskb_may_pull" check [breaks all nonzero source queries on little-endian (!)] 2) Add locking to source filter list [resend of prior patch] 3) fix "mld_marksources()" to a) send nothing when all queried sources are excluded b) send full exclude report when source queried sources are not excluded c) don't schedule a timer when there's nothing to report NOTE: RFC 3810 specifies the source list should be saved and each source reported individually as an IS_IN. This is an obvious DOS path, requiring the host to store and then multicast as many sources as are queried (e.g., millions...). This alternative sends a full, relevant report that's limited to number of sources present on the machine. 4) fix "add_grec()" to send empty-source records when it should The original check doesn't account for a non-empty source list with all sources inactive; the new code keeps that short-circuit case, and also generates the group header with an empty list if needed. 5) fix mca_crcount decrement to be after add_grec(), which needs its original value These issues (other than item #1 ;-) ) were all found by Yan Zheng, much thanks! Signed-off-by: David L Stevens <dlstevens@us.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
David S. Miller authored
Currently the checks are scattered all over and this leads to inconsistencies and even cases where the check is not made. Based upon a patch from Kris Katterjohn. Signed-off-by: David S. Miller <davem@davemloft.net>
-
YOSHIFUJI Hideaki authored
We need to release idev->lcok before we call addrconf_dad_stop(). It calls ipv6_addr_del(), which will hold idev->lock. Bug spotted by Yasuyuki KOZAKAI <yasuyuki.kozakai@toshiba.co.jp>. Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Russell King authored
We only want the received character without the status bits for sysrq handling. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
-
David Kimdon authored
Call nf_bridge_put() before allocating a new nf_bridge structure and potentially overwriting the pointer to a previously allocated one. This fixes a memory leak which can occur when the bridge topology allows for an skb to traverse more than one bridge. Signed-off-by: David Kimdon <david.kimdon@devicescape.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
David L Stevens authored
The existing default of 10 is just way too low. Signed-off-by: David L Stevens <dlstevens@us.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
- 26 Dec, 2005 1 commit
-
-
James Bottomley authored
The oops is characteristic of the underlying device being removed from visibility before the class device, and sure enough we do device_del() before transport_unregister() in the scsi_target_reap() routines. I've no idea why this is suddenly showing up, since the code has been in there since that function was first invented. However, I've confirmed this fixes Andrew Vasquez's boot oops. Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
-
- 24 Dec, 2005 5 commits
-
-
Linus Torvalds authored
Ho ho ho.
-
Kurt Huwig authored
Fix n_r3964 timeouts (hardcoded for 100Hz) Also the include of <asm/termios.h> in 'n_r3964.h' is unnecessary and prevents using the header file in any application that has to include <termios.h> due to duplicate definition of 'struct termio'. Signed-off-by: Linus Torvalds <torvalds@osdl.org>
-
Linus Torvalds authored
-
Linus Torvalds authored
-
Linus Torvalds authored
-