- 05 Apr, 2012 3 commits
-
-
Eric Dumazet authored
commit 2f533844 (tcp: allow splice() to build full TSO packets) added a regression for splice() calls using SPLICE_F_MORE. We need to call tcp_flush() at the end of the last page processed in tcp_sendpages(), or else transmits can be deferred and future sends stall. Add a new internal flag, MSG_SENDPAGE_NOTLAST, acting like MSG_MORE, but with different semantic. For all sendpage() providers, its a transparent change. Only sock_sendpage() and tcp_sendpages() can differentiate the two different flags provided by pipe_to_sendpage() Reported-by:
Tom Herbert <therbert@google.com> Cc: Nandita Dukkipati <nanditad@google.com> Cc: Neal Cardwell <ncardwell@google.com> Cc: Tom Herbert <therbert@google.com> Cc: Yuchung Cheng <ycheng@google.com> Cc: H.K. Jerry Chu <hkchu@google.com> Cc: Maciej Żenczykowski <maze@google.com> Cc: Mahesh Bandewar <maheshb@google.com> Cc: Ilpo Järvinen <ilpo.jarvinen@helsinki.fi> Signed-off-by:
Eric Dumazet <eric.dumazet@gmail>com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
RongQing.Li authored
Convert array index from the loop bound to the loop index. And remove the void type conversion to ip6_mc_del1_src() return code, seem it is unnecessary, since ip6_mc_del1_src() does not use __must_check similar attribute, no compiler will report the warning when it is removed. v2: enrich the commit header Signed-off-by:
RongQing.Li <roy.qing.li@gmail.com> Signed-off-by:
-
Thadeu Lima de Souza Cascardo authored
The driver uses a 2-order allocation, which is too much on architectures like ppc64, which has a 64KiB page. This particular allocation is used for large packet fragments that may have a size of 512, 1024, 4096 or fill the whole allocation. So, a minimum size of 16384 is good enough and will be the same size that is used in architectures of 4KiB sized pages. This will avoid allocation failures that we see when the system is under stress, but still has plenty of memory, like the one below. This will also allow us to set the interface MTU to higher values like 9000, which was not possible on ppc64 without this patch. Node 1 DMA: 737*64kB 37*128kB 0*256kB 0*512kB 0*1024kB 0*2048kB 0*4096kB 0*8192kB 0*16384kB = 51904kB 83137 total pagecache pages 0 pages in swap cache Swap cache stats: add 0, delete 0, find 0/0 Free swap = 10420096kB Total swap = 10420096kB 107776 pages RAM 1184 pages reserved 147343 pages shared 28152 pages non-shared netstat: page allocation failure. order:2, mode:0x4020 Call Trace: [c0000001a4fa3770] [c000000000012f04] .show_stack+0x74/0x1c0 (unreliable) [c0000001a4fa3820] [c00000000016af38] .__alloc_pages_nodemask+0x618/0x930 [c0000001a4fa39a0] [c0000000001a71a0] .alloc_pages_current+0xb0/0x170 [c0000001a4fa3a40] [d00000000dcc3e00] .mlx4_en_alloc_frag+0x200/0x240 [mlx4_en] [c0000001a4fa3b10] [d00000000dcc3f8c] .mlx4_en_complete_rx_desc+0x14c/0x250 [mlx4_en] [c0000001a4fa3be0] [d00000000dcc4eec] .mlx4_en_process_rx_cq+0x62c/0x850 [mlx4_en] [c0000001a4fa3d20] [d00000000dcc5150] .mlx4_en_poll_rx_cq+0x40/0x90 [mlx4_en] [c0000001a4fa3dc0] [c0000000004e2bb8] .net_rx_action+0x178/0x450 [c0000001a4fa3eb0] [c00000000009c9b8] .__do_softirq+0x118/0x290 [c0000001a4fa3f90] [c000000000031df8] .call_do_softirq+0x14/0x24 [c000000184c3b520] [c00000000000e700] .do_softirq+0xf0/0x110 [c000000184c3b5c0] [c00000000009c6d4] .irq_exit+0xb4/0xc0 [c000000184c3b640] [c00000000000e964] .do_IRQ+0x144/0x230 Signed-off-by:
Thadeu Lima de Souza Cascardo <cascardo@linux.vnet.ibm.com> Signed-off-by:
Kleber Sacilotto de Souza <klebers@linux.vnet.ibm.com> Tested-by:
-
- 04 Apr, 2012 15 commits
-
-
Marc Kleine-Budde authored
In commit (bfab27a1 stmmac: add the experimental PCI support) the IFF_UNICAST_FLT flag has been removed from the stmmac_mac_device_setup() function. This patch re-adds the flag. Signed-off-by:
Marc Kleine-Budde <mkl@pengutronix.de> Acked-by:
Giuseppe Cavallaro <peppe.cavallaro@st.com> Signed-off-by:
-
Yaniv Rosner authored
This patch clears a warning message of "MDC/MDIO access timeout" which may appear when interface is loaded due to missing clock setting before resetting the LED, and starting periodic function too early. Signed-off-by:
Yaniv Rosner <yanivr@broadcom.com> Signed-off-by:
Eilon Greenstein <eilong@broadcom.com> Signed-off-by:
-
Yaniv Rosner authored
Fix a link problem on the second port of BCM57711 + BCM84823 boards due to incorrect macro usage. Signed-off-by:
-
Yaniv Rosner authored
Signed-off-by:
-
Yaniv Rosner authored
Signed-off-by:
-
Yaniv Rosner authored
This patch fixes a link problem on BCM57712 + BCM8727 designs in which the TX laser is controller by GPIO, after 1.60.xx drivers were previously loaded. On these designs the TX_LASER is enabled by logic AND between the PHY (through MDIO), and the GPIO. When an old driver is used, it disables the MDIO part, hence the GPIO control had no affect de facto. Signed-off-by:
-
Yaniv Rosner authored
Fix no-LED problem when link speed is 1G on BCM57712 + BCM8727 designs, by removing a logic error checking for a different PHY. Signed-off-by:
-
Yaniv Rosner authored
Fix 578x0-SFI pre-emphasis settings per HW recommendations to achieve better link strength. Signed-off-by:
-
Yaniv Rosner authored
BCM57810-KR link may not come up in 1G after running loopback test, so set the relevant registers to their default values before starting KR autoneg. Signed-off-by:
-
Yaniv Rosner authored
Fix 57810-KR flow-control handling link is achieved via CL37 AN. Signed-off-by:
-
Yaniv Rosner authored
Fix a problem in which PFC frames are not honored, due to incorrect link attributes synchronization following PMF migration, and verify PFC XON is not stuck from previous link change. Signed-off-by:
-
stephen hemminger authored
Modified from original patch from Chris. The sky2 driver has to have 8 byte alignment of receive buffer on some chip versions. On architectures which don't support efficient unaligned access this doesn't work very well. The solution is to just copy all received packets which is what the driver already does for small packets. This allows the driver to be used on the Tilera TILEmpower-Gx, since the tile architecture doesn't currently handle kernel unaligned accesses, just userspace. Signed-off-by:
Stephen Hemminger <shemminger@vyatta.com> Acked-by:
Chris Metcalf <cmetcalf@tilera.com> Signed-off-by:
-
Shlomo Pongratz authored
The current implemenation was buggy for slaves who use ndo_neigh_setup, since the networking stack invokes the bonding device ndo entry (from neigh_params_alloc) before any devices are enslaved, and the bonding driver can't further delegate the call at that point in time. As a result when bonding IPoIB devices, the neigh_cleanup hasn't been called. Fix that by deferring the actual call into the slave ndo_neigh_setup from the time the bonding neigh_setup is called. Signed-off-by:
Shlomo Pongratz <shlomop@mellanox.com> Signed-off-by:
Jay Vosburgh <fubar@us.ibm.com> Signed-off-by:
-
Shlomo Pongratz authored
commit 7d26bb10 "bonding: emit event when bonding changes MAC" didn't take care to emit the NETDEV_CHANGEADDR event in bond_release, where bonding actually changes the mac address (to all zeroes). As a result the neighbours aren't deleted by the core networking code (which does so upon getting that event). Signed-off-by:
-
Thomas Graf authored
getsockopt(..., SCTP_EVENTS, ...) performs a length check and returns an error if the user provides less bytes than the size of struct sctp_event_subscribe. Struct sctp_event_subscribe needs to be extended by an u8 for every new event or notification type that is added. This obviously makes getsockopt fail for binaries that are compiled against an older versions of <net/sctp/user.h> which do not contain all event types. This patch changes getsockopt behaviour to no longer return an error if not enough bytes are being provided by the user. Instead, it returns as much of sctp_event_subscribe as fits into the provided buffer. This leads to the new behavior that users see what they have been aware of at compile time. The setsockopt(..., SCTP_EVENTS, ...) API is already behaving like this. Signed-off-by:
Thomas Graf <tgraf@suug.ch> Acked-by:
Vlad Yasevich <vladislav.yasevich@hp.com> Signed-off-by:
-
- 03 Apr, 2012 22 commits
-
-
Pablo Neira Ayuso authored
We have to decrement the conntrack counter if we fail to access the zone extension. Reported-by:
Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp> Signed-off-by:
Pablo Neira Ayuso <pablo@netfilter.org> Signed-off-by:
-
Pablo Neira Ayuso authored
The error path misses putting the timeout object. This patch adds new function xt_ct_tg_timeout_put() to put the timeout object. Reported-by:
-
Pablo Neira Ayuso authored
Reported-by:
-
git://1984.lsi.us.es/netDavid S. Miller authored
-
Artem Savkov authored
NAPI is disabled during suspend and needs to be enabled on resume. Without this the driver locks up during resume in rtl_reset_work() trying to disable NAPI again. Signed-off-by:
Artem Savkov <artem.savkov@gmail.com> Acked-by:
Francois Romieu <romieu@fr.zoreil.com> Signed-off-by:
-
Yuval Mintz authored
Commit 621b4d66 updated the bnx2x driver to a new FW version, but lacked a commit to a header file with changes to the firmware's interface. The missing interface change causes iscsi and fcoe to misbehave with the updated firmware. Signed-off-by:
Yuval Mintz <yuvalmin@broadcom.com> Signed-off-by:
Dmitry Kravkov <dmitry@broadcom.com> Signed-off-by:
-
Srinivas Kandagatla authored
This patch fixes Auto Power Saving configuration in ip101a_config_init which was broken as there is no phy register write followed after setting IP101A_APS_ON flag. This patch also fixes the return value of ip101a_config_init. Without this patch ip101a_config_init returns 2 which is not an error accroding to IS_ERR and the mac driver will continue accessing 2 as valid pointer to phy_dev resulting in memory fault. Signed-off-by:
Srinivas Kandagatla <srinivas.kandagatla@st.com> Signed-off-by:
-
-
Matthew Vick authored
In rare circumstances, a descriptor writeback flush may not work if it arrives on a specific clock cycle as a writeback request is going out. Signed-off-by:
Matthew Vick <matthew.vick@intel.com> Tested-by:
Aaron Brown <aaron.f.brown@intel.com> Signed-off-by:
Jeff Kirsher <jeffrey.t.kirsher@intel.com>
-
Bruce Allan authored
When the adapter is closed while it is simultaneously going through a reset, it can cause a null-pointer dereference when the two different code paths simultaneously cleanup up the Tx/Rx resources. Signed-off-by:
Bruce Allan <bruce.w.allan@intel.com> Tested-by:
-
Multanen, Eric W authored
Fix up code so that changes in DCB settings are detected only when ixgbe_dcbnl_set_all is called. Previously, a series of 'change' commands followed by a call to ixgbe_dcbnl_set_all() would always be handled as a HW change - even if the net change was zero. This patch checks for this case of no actual change and skips going through the HW set process. Without this fix, the link could reset and result in a link flap. The core change in this patch is to check for changes in the ixgbe_copy_dcb_cfg() routine - and return a bitmask of detected changes. The other places where changes were detected previously can be removed. Signed-off-by:
Eric Multanen <eric.w.multanen@intel.com> Tested-by:
Ross Brattain <ross.b.brattain@intel.com> Signed-off-by:
-
Jan Seiffert authored
Now the helper function from filter.c for negative offsets is exported, it can be used it in the jit to handle negative offsets. First modify the asm load helper functions to handle: - know positive offsets - know negative offsets - any offset then the compiler can be modified to explicitly use these helper when appropriate. This fixes the case of a negative X register and allows to lift the restriction that bpf programs with negative offsets can't be jited. Signed-of-by:
Jan Seiffert <kaffeemonster@googlemail.com> Signed-off-by:
Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by:
-
Jan Seiffert authored
The function is renamed to make it a little more clear what it does. It is not added to any .h because it is not for general consumption, only for bpf internal use (and so by the jits). Signed-of-by:
-
Fernando Luis Vazquez Cao authored
The explanation of ip_local_port_range in Documentation/networking/ip-sysctl.txt contains several factual errors: - The default value of ip_local_port_range does not depend on the amount of memory available in the system. - tcp_tw_recycle is not enabled by default. - 1024-4999 is not the default value. - Etc. Clean up the mess. Signed-off-by:
Fernando Luis Vazquez Cao <fernando@oss.ntt.co.jp> Signed-off-by:
-
Eric Dumazet authored
vmsplice()/splice(pipe, socket) call do_tcp_sendpages() one page at a time, adding at most 4096 bytes to an skb. (assuming PAGE_SIZE=4096) The call to tcp_push() at the end of do_tcp_sendpages() forces an immediate xmit when pipe is not already filled, and tso_fragment() try to split these skb to MSS multiples. 4096 bytes are usually split in a skb with 2 MSS, and a remaining sub-mss skb (assuming MTU=1500) This makes slow start suboptimal because many small frames are sent to qdisc/driver layers instead of big ones (constrained by cwnd and packets in flight of course) In fact, applications using sendmsg() (adding an additional memory copy) instead of vmsplice()/splice()/sendfile() are a bit faster because of this anomaly, especially if serving small files in environments with large initial [c]wnd. Call tcp_push() only if MSG_MORE is not set in the flags parameter. This bit is automatically provided by splice() internals but for the last page, or on all pages if user specified SPLICE_F_MORE splice() flag. In some workloads, this can reduce number of sent logical packets by an order of magnitude, making zero-copy TCP actually faster than one-copy :) Reported-by:
-
David Woodhouse authored
For every transmitted packet, ppp_start_xmit() will stop the netdev queue and then, if appropriate, restart it. This causes the TX softirq to run, entirely gratuitously. This is "only" a waste of CPU time in the normal case, but it's actively harmful when the PPP device is a TEQL slave — the wakeup will cause the offending device to receive the next TX packet from the TEQL queue, when it *should* have gone to the next slave in the list. We end up seeing large bursts of packets on just *one* slave device, rather than using the full available bandwidth over all slaves. This patch fixes the problem by *not* unconditionally stopping the queue in ppp_start_xmit(). It adds a return value from ppp_xmit_process() which indicates whether the queue should be stopped or not. It *doesn't* remove the call to netif_wake_queue() from ppp_xmit_process(), because other code paths (especially from ppp_output_wakeup()) need it there and it's messy to push it out to the other callers to do it based on the return value. So we leave it in place — it's a no-op in the case where the queue wasn't stopped, so it's harmless in the TX path. Signed-off-by:
David Woodhouse <David.Woodhouse@intel.com> Signed-off-by:
-
Eric Dumazet authored
Commit f04565dd (dev: use name hash for dev_seq_ops) added a second regression, as some devices are missing from /proc/net/dev if many devices are defined. When seq_file buffer is filled, the last ->next/show() method is canceled (pos value is reverted to value prior ->next() call) Problem is after above commit, we dont restart the lookup at right position in ->start() method. Fix this by removing the internal 'pos' pointer added in commit, since we need to use the 'loff_t *pos' provided by seq_file layer. This also reverts commit 5cac98dd (net: Fix corruption in /proc/*/net/dev_mcast), since its not needed anymore. Reported-by:
Ben Greear <greearb@candelatech.com> Signed-off-by:
-
git://people.freedesktop.org/~airlied/linuxLinus Torvalds authored
Pull drm update from Dave Airlie: "This pull just contains a forward of the Intel fixes from Daniel. The only annoyance is the RC6 enable, which really should have made -next, but since Ubuntu are shipping it I reckon its getting a good testing now by the time 3.4 comes out. The pull from Daniel contains his pull message to me: "A few patches for 3.4, major part is 3 regression fixes: - ppgtt broke hibernate on snb/ivb. Somehow our QA claims that it still works, which is why this has not been caught earlier. - ppgtt flails in combination with dmar. I kinda expected this one :( - fence handling bugfix for gen2/3. Iirc this one is about a year old, fix curtesy Chris Wilson. I've created an shockingly simple i-g-t test to catch this in the future." Wrt regressions I've just got a report that gmbus (newly enabled again in 3.4) is a bit noisy. I'm looking into this atm. Also included are the rc6 enable patches for snb from Eugeni. I wanted to include these in the main 3.4 pull but screwed it up. Please hit me. Imo these kind of patches really should go in before -rc1, but in thise case rc6 has brought us tons of press and guinea pigs^W^W testers and ubuntu is already running with it. So I estimate a pretty small chance for this to blow up. And some smaller things: - two minor locking snafus - server gt2 ivb pciid - 2 patches to sanitize the register state left behind by the bios some more - 2 new quirk entries - cs readback trick against missed IRQs from ivb also enabled on snb - sprite fix from Jesse" Let's see if the "enable RC6 on sandybridge" finally works and sticks. I've been enabling it by hand (i915.i915_enable_rc6=1) for several months on my Macbook Air, and it definitely makes a difference (and has worked for me). But every time we enabled it before it showed some odd hw buglet for *somebody*. This time it's all good, I'm sure. * 'drm-fixes-intel' of git://people.freedesktop.org/~airlied/linux: drm/i915: treat src w & h as fixed point in sprite handling code drm/i915: no-lvds quirk on MSI DC500 drm/i915: Add lock on drm_helper_resume_force_mode drm/i915: don't leak struct_mutex lock on ppgtt init failures drm/i915: disable ppgtt on snb when dmar is enabled drm/i915: add Ivy Bridge GT2 Server entries drm/i915: properly clear SSC1 bit in the pch refclock init code drm/i915: apply CS reg readback trick against missed IRQ on snb drm/i915: quirk away broken OpRegion VBT drm/i915: enable plain RC6 on Sandy Bridge by default drm/i915: allow to select rc6 modes via kernel parameter drm/i915: Mark untiled BLT commands as fenced on gen2/3 drm/i915: properly restore the ppgtt page directory on resume drm/i915: Sanitize BIOS debugging bits from PIPECONF -
git://people.freedesktop.org/~airlied/linuxLinus Torvalds authored
Pull drm fixes from Dave Airlie: "Mainly nouveau fixes, one for a regressions in -rc1, fixes for booting on a ppc G5, and a Kconfig fix. Two radeon fixes, one oops, one s/r fix. One udl mmap fix. And one core drm fix to stop bad fbdev apps overwriting bits of ram." * 'drm-fixes' of git://people.freedesktop.org/~airlied/linux: drm: Validate requested virtual size against allocated fb size drm/radeon: Don't dereference possibly-NULL pointer. mm, drm/udl: fixup vma flags on mmap drm/radeon/kms: fix fans after resume nouveau/bios: Fix tracking of BIOS image data nouveau: Fix crash when pci_ram_rom() returns a size of 0 drm/nouveau: select POWER_SUPPLY drm/nouveau: inform userspace of relaxed kernel subchannel requirements Revert "drm/nouveau: inform userspace of new kernel subchannel requirements" drm/nouveau: oops, create m2mf for nvd9 too
-
git://git.monstr.eu/linux-2.6-microblazeLinus Torvalds authored
Pull arch/microblaze fixes from Michal Simek. * 'next' of git://git.monstr.eu/linux-2.6-microblaze: microblaze: Fix ret_from_fork declaration microblaze: Do not use tlb_skip in early_printk microblaze: Add missing headers caused by disintegration asm/system.h microblaze: Fix stack usage in PAGE_SIZE copy_tofrom_user microblaze: Fix tlb_skip variable on noMMU system microblaze: Fix __futex_atomic_op macro register usage
-
git://git.kernel.org/pub/scm/linux/kernel/git/geert/linux-m68kLinus Torvalds authored
Pull m68k fixes from Geert Uytterhoeven: "Here are a few fixes for the m68k architecture. Nothing fancy this time, just a build fix for the asm/system.h disintegration, and two fixes for missing platform checks (one got in during last merge window), which can cause crashes in multi-platform kernels." * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/linux-m68k: m68k/q40: Add missing platform check before registering platform devices m68k/mac: Add missing platform check before registering platform devices m68k: include asm/cmpxchg.h in our m68k atomic.h
-
Dave Airlie authored
Merge branch 'drm-intel-fixes' of git://people.freedesktop.org/~danvet/drm-intel into drm-intel-fixes From Daniel Vetter: "A few patches for 3.4, major part is 3 regression fixes: - ppgtt broke hibernate on snb/ivb. Somehow our QA claims that it still works, which is why this has not been caught earlier. - ppgtt flails in combination with dmar. I kinda expected this one :( - fence handling bugfix for gen2/3. Iirc this one is about a year old, fix curtesy Chris Wilson. I've created an shockingly simple i-g-t test to catch this in the future. Wrt regressions I've just got a report that gmbus (newly enabled again in 3.4) is a bit noisy. I'm looking into this atm. Also included are the rc6 enable patches for snb from Eugeni. I wanted to include these in the main 3.4 pull but screwed it up. Please hit me. Imo these kind of patches really should go in before -rc1, but in thise case rc6 has brought us tons of press and guinea pigs^W^W testers and ubuntu is already running with it. So I estimate a pretty small chance for this to blow up. And some smaller things: - two minor locking snafus - server gt2 ivb pciid - 2 patches to sanitize the register state left behind by the bios some more - 2 new quirk entries - cs readback trick against missed IRQs from ivb also enabled on snb - sprite fix from Jesse" * 'drm-intel-fixes' of git://people.freedesktop.org/~danvet/drm-intel: drm/i915: treat src w & h as fixed point in sprite handling code drm/i915: no-lvds quirk on MSI DC500 drm/i915: Add lock on drm_helper_resume_force_mode drm/i915: don't leak struct_mutex lock on ppgtt init failures drm/i915: disable ppgtt on snb when dmar is enabled drm/i915: add Ivy Bridge GT2 Server entries drm/i915: properly clear SSC1 bit in the pch refclock init code drm/i915: apply CS reg readback trick against missed IRQ on snb drm/i915: quirk away broken OpRegion VBT drm/i915: enable plain RC6 on Sandy Bridge by default drm/i915: allow to select rc6 modes via kernel parameter drm/i915: Mark untiled BLT commands as fenced on gen2/3 drm/i915: properly restore the ppgtt page directory on resume drm/i915: Sanitize BIOS debugging bits from PIPECONF
-
