1. 22 May, 2020 8 commits
    • Mark Brown's avatar
      Merge series "spi: dw: Add generic DW DMA controller support" from Serge Semin... · 36f8f189
      Mark Brown authored
      Merge series "spi: dw: Add generic DW DMA controller support" from Serge Semin <Sergey.Semin@baikalelectronics.ru>:
      
      Baikal-T1 SoC provides a DW DMA controller to perform low-speed peripherals
      Mem-to-Dev and Dev-to-Mem transaction. This is also applicable to the DW
      APB SSI devices embedded into the SoC. Currently the DMA-based transfers
      are supported by the DW APB SPI driver only as a middle layer code for
      Intel MID/Elkhart PCI devices. Seeing the same code can be used for normal
      platform DMAC device we introduced a set of patches to fix it within this
      series.
      
      First of all we need to add the Tx and Rx DMA channels support into the DW
      APB SSI binding. Then there are several fixes and cleanups provided as a
      initial preparation for the Generic DMA support integration: add Tx/Rx
      finish wait methods, clear DMAC register when done or stopped, Fix native
      CS being unset, enable interrupts in accordance with DMA xfer mode,
      discard static DW DMA slave structures, discard unused void priv pointer
      and dma_width member of the dw_spi structure, provide the DMA Tx/Rx burst
      length parametrisation and make sure it's optionally set in accordance
      with the DMA max-burst capability.
      
      In order to have the DW APB SSI MMIO driver working with DMA we need to
      initialize the paddr field with the physical base address of the DW APB SSI
      registers space. Then we unpin the Intel MID specific code from the
      generic DMA one and placed it into the spi-dw-pci.c driver, which is a
      better place for it anyway. After that the naming cleanups are performed
      since the code is going to be used for a generic DMAC device. Finally the
      Generic DMA initialization can be added to the generic version of the
      DW APB SSI IP.
      
      Last but not least we traditionally convert the legacy plain text-based
      dt-binding file with yaml-based one and as a cherry on a cake replace
      the manually written DebugFS registers read method with a ready-to-use
      for the same purpose regset32 DebugFS interface usage.
      
      This patchset is rebased and tested on the spi/for-next (5.7-rc5):
      base-commit: fe9fce6b2cf3 ("Merge remote-tracking branch 'spi/for-5.8' into spi-next")
      
      Link: https://lore.kernel.org/linux-spi/20200508132943.9826-1-Sergey.Semin@baikalelectronics.ru/
      Changelog v2:
      - Rebase on top of the spi repository for-next branch.
      - Move bindings conversion patch to the tail of the series.
      - Move fixes to the head of the series.
      - Apply as many changes as possible to be applied the Generic DMA
        functionality support is added and the spi-dw-mid is moved to the
        spi-dw-dma driver.
      - Discard patch "spi: dw: Fix dma_slave_config used partly uninitialized"
        since the problem has already been fixed.
      - Add new patch "spi: dw: Discard unused void priv pointer".
      - Add new patch "spi: dw: Discard dma_width member of the dw_spi structure".
        n_bytes member of the DW SPI data can be used instead.
      - Build the DMA functionality into the DW APB SSI core if required instead
        of creating a separate kernel module.
      - Use conditional statement instead of the ternary operator in the ref
        clock getter.
      
      Link: https://lore.kernel.org/linux-spi/20200515104758.6934-1-Sergey.Semin@baikalelectronics.ru/
      Changelog v3:
      - Use spi_delay_exec() method to wait for the DMA operation completion.
      - Explicitly initialize the dw_dma_slave members on stack.
      - Discard the dws->fifo_len utilization in the Tx FIFO DMA threshold
        setting from the patch where we just add the default burst length
        constants.
      - Use min() method to calculate the optimal burst values.
      - Add new patch which moves the spi-dw.c source file to spi-dw-core.c in
        order to preserve the DW APB SSI core driver name.
      - Add commas in the debugfs_reg32 structure initializer and after the last
        entry of the dw_spi_dbgfs_regs array.
      
      Link: https://lore.kernel.org/linux-spi/20200521012206.14472-1-Sergey.Semin@baikalelectronics.ru
      Changelog v4:
      - Get back ndelay() method to wait for an SPI transfer completion.
        spi_delay_exec() isn't suitable for the atomic context.
      Co-developed-by: default avatarGeorgy Vlasov <Georgy.Vlasov@baikalelectronics.ru>
      Signed-off-by: default avatarGeorgy Vlasov <Georgy.Vlasov@baikalelectronics.ru>
      Co-developed-by: default avatarRamil Zaripov <Ramil.Zaripov@baikalelectronics.ru>
      Signed-off-by: default avatarRamil Zaripov <Ramil.Zaripov@baikalelectronics.ru>
      Signed-off-by: default avatarSerge Semin <Sergey.Semin@baikalelectronics.ru>
      Cc: Alexey Malahov <Alexey.Malahov@baikalelectronics.ru>
      Cc: Maxim Kaurkin <Maxim.Kaurkin@baikalelectronics.ru>
      Cc: Pavel Parkhomenko <Pavel.Parkhomenko@baikalelectronics.ru>
      Cc: Ekaterina Skachko <Ekaterina.Skachko@baikalelectronics.ru>
      Cc: Vadim Vlasov <V.Vlasov@baikalelectronics.ru>
      Cc: Alexey Kolotnikov <Alexey.Kolotnikov@baikalelectronics.ru>
      Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
      Cc: Paul Burton <paulburton@kernel.org>
      Cc: Ralf Baechle <ralf@linux-mips.org>
      Cc: Arnd Bergmann <arnd@arndb.de>
      Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
      Cc: Rob Herring <robh+dt@kernel.org>
      Cc: linux-mips@vger.kernel.org
      Cc: linux-spi@vger.kernel.org
      Cc: devicetree@vger.kernel.org
      Cc: linux-kernel@vger.kernel.org
      
      Serge Semin (16):
        spi: dw: Add Tx/Rx finish wait methods to the MID DMA
        spi: dw: Enable interrupts in accordance with DMA xfer mode
        spi: dw: Discard static DW DMA slave structures
        spi: dw: Discard unused void priv pointer
        spi: dw: Discard dma_width member of the dw_spi structure
        spi: dw: Parameterize the DMA Rx/Tx burst length
        spi: dw: Use DMA max burst to set the request thresholds
        spi: dw: Fix Rx-only DMA transfers
        spi: dw: Add core suffix to the DW APB SSI core source file
        spi: dw: Move Non-DMA code to the DW PCIe-SPI driver
        spi: dw: Remove DW DMA code dependency from DW_DMAC_PCI
        spi: dw: Add DW SPI DMA/PCI/MMIO dependency on the DW SPI core
        spi: dw: Cleanup generic DW DMA code namings
        spi: dw: Add DMA support to the DW SPI MMIO driver
        spi: dw: Use regset32 DebugFS method to create regdump file
        dt-bindings: spi: Convert DW SPI binding to DT schema
      
       .../bindings/spi/snps,dw-apb-ssi.txt          |  44 ---
       .../bindings/spi/snps,dw-apb-ssi.yaml         | 127 +++++++++
       .../devicetree/bindings/spi/spi-dw.txt        |  24 --
       drivers/spi/Kconfig                           |  15 +-
       drivers/spi/Makefile                          |   5 +-
       drivers/spi/{spi-dw.c => spi-dw-core.c}       |  88 ++----
       drivers/spi/{spi-dw-mid.c => spi-dw-dma.c}    | 261 ++++++++++--------
       drivers/spi/spi-dw-mmio.c                     |   4 +
       drivers/spi/spi-dw-pci.c                      |  50 +++-
       drivers/spi/spi-dw.h                          |  33 ++-
       10 files changed, 392 insertions(+), 259 deletions(-)
       delete mode 100644 Documentation/devicetree/bindings/spi/snps,dw-apb-ssi.txt
       create mode 100644 Documentation/devicetree/bindings/spi/snps,dw-apb-ssi.yaml
       delete mode 100644 Documentation/devicetree/bindings/spi/spi-dw.txt
       rename drivers/spi/{spi-dw.c => spi-dw-core.c} (82%)
       rename drivers/spi/{spi-dw-mid.c => spi-dw-dma.c} (55%)
      
      --
      2.25.1
      36f8f189
    • Christopher Hill's avatar
      spi: rb4xx: add corresponding device tree documentation · 39690c8d
      Christopher Hill authored
      This patch adds the correcsponding MikroTik vendor and device tree
      documentation
      Signed-off-by: default avatarChristopher Hill <ch6574@gmail.com>
      Link: https://lore.kernel.org/r/20200521183631.37806-3-ch6574@gmail.comSigned-off-by: default avatarMark Brown <broonie@kernel.org>
      39690c8d
    • Christopher Hill's avatar
      spi: rb4xx: update driver to be device tree aware · 9a436c62
      Christopher Hill authored
      This patch updates the spi driver spi-rb4xx.c to be device tree aware
      Signed-off-by: default avatarChristopher Hill <ch6574@gmail.com>
      Link: https://lore.kernel.org/r/20200521183631.37806-2-ch6574@gmail.comSigned-off-by: default avatarMark Brown <broonie@kernel.org>
      9a436c62
    • Christopher Hill's avatar
      spi: rb4xx: null pointer bug fix · 678e5e1e
      Christopher Hill authored
      This patch fixes a null pointer bug in the spi driver spi-rb4xx.c by
      moving the private data initialization to earlier in probe
      Signed-off-by: default avatarChristopher Hill <ch6574@gmail.com>
      Link: https://lore.kernel.org/r/20200521183631.37806-1-ch6574@gmail.comSigned-off-by: default avatarMark Brown <broonie@kernel.org>
      678e5e1e
    • Serge Semin's avatar
      spi: dw: Discard dma_width member of the dw_spi structure · 4fdc03a9
      Serge Semin authored
      This member has exactly the same value as n_bytes of the DW SPI private
      data object, it's calculated at the same point of the transfer method,
      n_bytes isn't changed during the whole transfer, and they even serve for
      the same purpose - keep number of bytes per transfer word, though the
      dma_width is used only to calculate the DMA source/destination addresses
      width, which n_bytes could be also utilized for. Taking all of these
      into account let's replace the dma_width member usage with n_bytes one
      and remove the former.
      Signed-off-by: default avatarSerge Semin <Sergey.Semin@baikalelectronics.ru>
      Reviewed-by: default avatarAndy Shevchenko <andriy.shevchenko@linux.intel.com>
      Cc: Georgy Vlasov <Georgy.Vlasov@baikalelectronics.ru>
      Cc: Ramil Zaripov <Ramil.Zaripov@baikalelectronics.ru>
      Cc: Alexey Malahov <Alexey.Malahov@baikalelectronics.ru>
      Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
      Cc: Paul Burton <paulburton@kernel.org>
      Cc: Ralf Baechle <ralf@linux-mips.org>
      Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
      Cc: Arnd Bergmann <arnd@arndb.de>
      Cc: Rob Herring <robh+dt@kernel.org>
      Cc: linux-mips@vger.kernel.org
      Cc: devicetree@vger.kernel.org
      
      Link: https://lore.kernel.org/r/20200522000806.7381-6-Sergey.Semin@baikalelectronics.ruSigned-off-by: default avatarMark Brown <broonie@kernel.org>
      4fdc03a9
    • Serge Semin's avatar
      spi: dw: Discard unused void priv pointer · 595c19d4
      Serge Semin authored
      Seeing the "void *priv" member of the dw_spi data structure is unused
      let's remove it. The glue-layers can embed the DW APB SSI controller
      descriptor into their private data object. MMIO driver for instance
      already utilizes that design pattern.
      Signed-off-by: default avatarSerge Semin <Sergey.Semin@baikalelectronics.ru>
      Reviewed-by: default avatarAndy Shevchenko <andriy.shevchenko@linux.intel.com>
      Cc: Georgy Vlasov <Georgy.Vlasov@baikalelectronics.ru>
      Cc: Ramil Zaripov <Ramil.Zaripov@baikalelectronics.ru>
      Cc: Alexey Malahov <Alexey.Malahov@baikalelectronics.ru>
      Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
      Cc: Paul Burton <paulburton@kernel.org>
      Cc: Ralf Baechle <ralf@linux-mips.org>
      Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
      Cc: Arnd Bergmann <arnd@arndb.de>
      Cc: Rob Herring <robh+dt@kernel.org>
      Cc: linux-mips@vger.kernel.org
      Cc: devicetree@vger.kernel.org
      Link: https://lore.kernel.org/r/20200522000806.7381-5-Sergey.Semin@baikalelectronics.ruSigned-off-by: default avatarMark Brown <broonie@kernel.org>
      595c19d4
    • Serge Semin's avatar
      spi: dw: Discard static DW DMA slave structures · 2afccbd2
      Serge Semin authored
      Having them declared is redundant since each struct dw_dma_chan has
      the same structure embedded and the structure from the passed dma_chan
      private pointer will be copied there as a result of the next calls
      chain:
      dma_request_channel() -> find_candidate() -> dma_chan_get() ->
      device_alloc_chan_resources() = dwc_alloc_chan_resources() ->
      dw_dma_filter().
      So just remove the static dw_dma_chan structures and use a locally
      declared data instance with dst_id/src_id set to the same values as
      the static copies used to have.
      Co-developed-by: default avatarGeorgy Vlasov <Georgy.Vlasov@baikalelectronics.ru>
      Signed-off-by: default avatarGeorgy Vlasov <Georgy.Vlasov@baikalelectronics.ru>
      Co-developed-by: default avatarRamil Zaripov <Ramil.Zaripov@baikalelectronics.ru>
      Signed-off-by: default avatarRamil Zaripov <Ramil.Zaripov@baikalelectronics.ru>
      Signed-off-by: default avatarSerge Semin <Sergey.Semin@baikalelectronics.ru>
      Cc: Alexey Malahov <Alexey.Malahov@baikalelectronics.ru>
      Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
      Cc: Paul Burton <paulburton@kernel.org>
      Cc: Ralf Baechle <ralf@linux-mips.org>
      Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
      Cc: Arnd Bergmann <arnd@arndb.de>
      Cc: Rob Herring <robh+dt@kernel.org>
      Cc: linux-mips@vger.kernel.org
      Cc: devicetree@vger.kernel.org
      
      Link: https://lore.kernel.org/r/20200522000806.7381-4-Sergey.Semin@baikalelectronics.ruSigned-off-by: default avatarMark Brown <broonie@kernel.org>
      2afccbd2
    • Serge Semin's avatar
      spi: dw: Enable interrupts in accordance with DMA xfer mode · 43dba9f3
      Serge Semin authored
      It's pointless to track the Tx overrun interrupts if Rx-only SPI
      transfer is issued. Similarly there is no need in handling the Rx
      overrun/underrun interrupts if Tx-only SPI transfer is executed.
      So lets unmask the interrupts only if corresponding SPI
      transactions are implied.
      Co-developed-by: default avatarGeorgy Vlasov <Georgy.Vlasov@baikalelectronics.ru>
      Signed-off-by: default avatarGeorgy Vlasov <Georgy.Vlasov@baikalelectronics.ru>
      Signed-off-by: default avatarSerge Semin <Sergey.Semin@baikalelectronics.ru>
      Cc: Ramil Zaripov <Ramil.Zaripov@baikalelectronics.ru>
      Cc: Alexey Malahov <Alexey.Malahov@baikalelectronics.ru>
      Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
      Cc: Paul Burton <paulburton@kernel.org>
      Cc: Ralf Baechle <ralf@linux-mips.org>
      Cc: Arnd Bergmann <arnd@arndb.de>
      Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
      Cc: Rob Herring <robh+dt@kernel.org>
      Cc: linux-mips@vger.kernel.org
      Cc: devicetree@vger.kernel.org
      Link: https://lore.kernel.org/r/20200522000806.7381-3-Sergey.Semin@baikalelectronics.ruSigned-off-by: default avatarMark Brown <broonie@kernel.org>
      43dba9f3
  2. 20 May, 2020 5 commits
  3. 19 May, 2020 1 commit
  4. 15 May, 2020 8 commits
    • Serge Semin's avatar
      spi: dw: Add Tx/Rx DMA properties · 7db097dc
      Serge Semin authored
      Since commit 22d48ad7 ("spi: dw: Add Elkhart Lake PSE DMA support")
      the spi-dw-mid.c module supports a platform DMA engine handling the DW APB
      SSI controller requests. Lets alter the DW SPI bindings file to accept the
      Rx and Tx DMA line specifiers.
      Signed-off-by: default avatarSerge Semin <Sergey.Semin@baikalelectronics.ru>
      Cc: Georgy Vlasov <Georgy.Vlasov@baikalelectronics.ru>
      Cc: Ramil Zaripov <Ramil.Zaripov@baikalelectronics.ru>
      Cc: Alexey Malahov <Alexey.Malahov@baikalelectronics.ru>
      Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
      Cc: Paul Burton <paulburton@kernel.org>
      Cc: Ralf Baechle <ralf@linux-mips.org>
      Cc: Arnd Bergmann <arnd@arndb.de>
      Cc: Allison Randal <allison@lohutok.net>
      Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
      Cc: Gareth Williams <gareth.williams.jx@renesas.com>
      Cc: linux-mips@vger.kernel.org
      Link: https://lore.kernel.org/r/20200515104758.6934-2-Sergey.Semin@baikalelectronics.ruSigned-off-by: default avatarMark Brown <broonie@kernel.org>
      7db097dc
    • Mark Brown's avatar
      Merge series "spi: dw: Add generic DW DMA controller support" from Serge Semin... · b271cf33
      Mark Brown authored
      Merge series "spi: dw: Add generic DW DMA controller support" from Serge Semin <Sergey.Semin@baikalelectronics.ru>:
      
      Baikal-T1 SoC provides a DW DMA controller to perform low-speed peripherals
      Mem-to-Dev and Dev-to-Mem transaction. This is also applicable to the DW
      APB SSI devices embedded into the SoC. Currently the DMA-based transfers
      are supported by the DW APB SPI driver only as a middle layer code for
      Intel MID/Elkhart PCI devices. Seeing the same code can be used for normal
      platform DMAC device we introduced a set of patches to fix it within this
      series.
      
      First of all we need to add the Tx and Rx DMA channels support into the DW
      APB SSI binding. Then there are several fixes and cleanups provided as a
      initial preparation for the Generic DMA support integration: add Tx/Rx
      finish wait methods, clear DMAC register when done or stopped, Fix native
      CS being unset, enable interrupts in accordance with DMA xfer mode,
      discard static DW DMA slave structures, discard unused void priv pointer
      and dma_width member of the dw_spi structure, provide the DMA Tx/Rx burst
      length parametrisation and make sure it's optionally set in accordance
      with the DMA max-burst capability.
      
      In order to have the DW APB SSI MMIO driver working with DMA we need to
      initialize the paddr field with the physical base address of the DW APB SSI
      registers space. Then we unpin the Intel MID specific code from the
      generic DMA one and placed it into the spi-dw-pci.c driver, which is a
      better place for it anyway. After that the naming cleanups are performed
      since the code is going to be used for a generic DMAC device. Finally the
      Generic DMA initialization can be added to the generic version of the
      DW APB SSI IP.
      
      Last but not least we traditionally convert the legacy plain text-based
      dt-binding file with yaml-based one and as a cherry on a cake replace
      the manually written DebugFS registers read method with a ready-to-use
      for the same purpose regset32 DebugFS interface usage.
      
      This patchset is rebased and tested on the spi/for-next (5.7-rc5):
      base-commit: fe9fce6b2cf3 ("Merge remote-tracking branch 'spi/for-5.8' into spi-next")
      Co-developed-by: default avatarGeorgy Vlasov <Georgy.Vlasov@baikalelectronics.ru>
      Signed-off-by: default avatarGeorgy Vlasov <Georgy.Vlasov@baikalelectronics.ru>
      Co-developed-by: default avatarRamil Zaripov <Ramil.Zaripov@baikalelectronics.ru>
      Signed-off-by: default avatarRamil Zaripov <Ramil.Zaripov@baikalelectronics.ru>
      Signed-off-by: default avatarSerge Semin <Sergey.Semin@baikalelectronics.ru>
      Cc: Alexey Malahov <Alexey.Malahov@baikalelectronics.ru>
      Cc: Maxim Kaurkin <Maxim.Kaurkin@baikalelectronics.ru>
      Cc: Pavel Parkhomenko <Pavel.Parkhomenko@baikalelectronics.ru>
      Cc: Ekaterina Skachko <Ekaterina.Skachko@baikalelectronics.ru>
      Cc: Vadim Vlasov <V.Vlasov@baikalelectronics.ru>
      Cc: Alexey Kolotnikov <Alexey.Kolotnikov@baikalelectronics.ru>
      Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
      Cc: Paul Burton <paulburton@kernel.org>
      Cc: Ralf Baechle <ralf@linux-mips.org>
      Cc: Arnd Bergmann <arnd@arndb.de>
      Cc: Allison Randal <allison@lohutok.net>
      Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
      Cc: Gareth Williams <gareth.williams.jx@renesas.com>
      Cc: Rob Herring <robh+dt@kernel.org>
      Cc: linux-mips@vger.kernel.org
      Cc: linux-spi@vger.kernel.org
      Cc: devicetree@vger.kernel.org
      Cc: linux-kernel@vger.kernel.org
      
      ---
      
      Changelog v2:
      - Rebase on top of the spi repository for-next branch.
      - Move bindings conversion patch to the tail of the series.
      - Move fixes to the head of the series.
      - Apply as many changes as possible to be applied the Generic DMA
        functionality support is added and the spi-dw-mid is moved to the
        spi-dw-dma driver.
      - Discard patch "spi: dw: Fix dma_slave_config used partly uninitialized"
        since the problem has already been fixed.
      - Add new patch "spi: dw: Discard unused void priv pointer".
      - Add new patch "spi: dw: Discard dma_width member of the dw_spi structure".
        n_bytes member of the DW SPI data can be used instead.
      - Build the DMA functionality into the DW APB SSI core if required instead
        of creating a separate kernel module.
      - Use conditional statement instead of the ternary operator in the ref
        clock getter.
      
      Serge Semin (19):
        dt-bindings: spi: dw: Add Tx/Rx DMA properties
        spi: dw: Add Tx/Rx finish wait methods to the MID DMA
        spi: dw: Clear DMAC register when done or stopped
        spi: dw: Fix native CS being unset
        spi: dw: Enable interrupts in accordance with DMA xfer mode
        spi: dw: Discard static DW DMA slave structures
        spi: dw: Discard unused void priv pointer
        spi: dw: Discard dma_width member of the dw_spi structure
        spi: dw: Parameterize the DMA Rx/Tx burst length
        spi: dw: Use DMA max burst to set the request thresholds
        spi: dw: Initialize paddr in DW SPI MMIO private data
        spi: dw: Fix Rx-only DMA transfers
        spi: dw: Move Non-DMA code to the DW PCIe-SPI driver
        spi: dw: Remove DW DMA code dependency from DW_DMAC_PCI
        spi: dw: Add DW SPI DMA/PCI/MMIO dependency on the DW SPI core
        spi: dw: Cleanup generic DW DMA code namings
        spi: dw: Add DMA support to the DW SPI MMIO driver
        spi: dw: Use regset32 DebugFS method to create regdump file
        dt-bindings: spi: Convert DW SPI binding to DT schema
      
       .../bindings/spi/snps,dw-apb-ssi.txt          |  42 ---
       .../bindings/spi/snps,dw-apb-ssi.yaml         | 127 +++++++++
       .../devicetree/bindings/spi/spi-dw.txt        |  24 --
       drivers/spi/Kconfig                           |  15 +-
       drivers/spi/Makefile                          |   7 +-
       drivers/spi/{spi-dw-mid.c => spi-dw-dma.c}    | 257 ++++++++++--------
       drivers/spi/spi-dw-mmio.c                     |   9 +-
       drivers/spi/spi-dw-pci.c                      |  50 +++-
       drivers/spi/spi-dw.c                          |  98 +++----
       drivers/spi/spi-dw.h                          |  33 ++-
       10 files changed, 405 insertions(+), 257 deletions(-)
       delete mode 100644 Documentation/devicetree/bindings/spi/snps,dw-apb-ssi.txt
       create mode 100644 Documentation/devicetree/bindings/spi/snps,dw-apb-ssi.yaml
       delete mode 100644 Documentation/devicetree/bindings/spi/spi-dw.txt
       rename drivers/spi/{spi-dw-mid.c => spi-dw-dma.c} (53%)
      
      --
      2.25.1
      b271cf33
    • Chris Ruehl's avatar
      spi: spi-rockchip: use num-cs property and ctlr->enable_gpiods · eb1262e3
      Chris Ruehl authored
      The original implementation set num_chipselect to ROCKCHIP_SPI_MAX_CS_NUM (2)
      which seems wrong here. spi0 has 2 native cs, all others just one. With
      enable and use of cs_gpiods / GPIO CS, its correct to set the num_chipselect
      from the num-cs property and set max_native_cs with the define.
      If num-cs is missing the default set to num_chipselect = 1.
      Signed-off-by: default avatarChris Ruehl <chris.ruehl@gtsys.com.hk>
      Link: https://lore.kernel.org/r/20200511083022.23678-4-chris.ruehl@gtsys.com.hkSigned-off-by: default avatarMark Brown <broonie@kernel.org>
      eb1262e3
    • Chris Ruehl's avatar
      spi: spi-rockchip: add support for spi slave mode · d065f41a
      Chris Ruehl authored
      Add support for spi slave mode in spi-rockchip. The register map has an entry
      for it. If spi-slave is set in dts, set this corresponding bit and add to
      mode_bits the SPI_NO_CS, allow slave mode without explicit CS use.
      Slave abort function had been added.
      Signed-off-by: default avatarChris Ruehl <chris.ruehl@gtsys.com.hk>
      Link: https://lore.kernel.org/r/20200511083022.23678-3-chris.ruehl@gtsys.com.hkSigned-off-by: default avatarMark Brown <broonie@kernel.org>
      d065f41a
    • Chris Ruehl's avatar
      spi: spi-rockchip: cleanup use struct spi_controller · d66571a2
      Chris Ruehl authored
      Cleanup, move from the compatibily layer struct spi_master over
      to struct spi_controller, and rename the related function calls.
      Signed-off-by: default avatarChris Ruehl <chris.ruehl@gtsys.com.hk>
      Link: https://lore.kernel.org/r/20200511083022.23678-2-chris.ruehl@gtsys.com.hkSigned-off-by: default avatarMark Brown <broonie@kernel.org>
      d66571a2
    • Serge Semin's avatar
      spi: dw: Clear DMAC register when done or stopped · 0327f0b8
      Serge Semin authored
      If DMAC register is left uncleared any further DMAless transfers
      may cause the DMAC hardware handshaking interface getting activated.
      So the next DMA-based Rx/Tx transaction will be started right
      after the dma_async_issue_pending() method is invoked even if no
      DMATDLR/DMARDLR conditions are met. This at the same time may cause
      the Tx/Rx FIFO buffers underrun/overrun. In order to fix this we
      must clear DMAC register after a current DMA-based transaction is
      finished.
      Co-developed-by: default avatarGeorgy Vlasov <Georgy.Vlasov@baikalelectronics.ru>
      Signed-off-by: default avatarGeorgy Vlasov <Georgy.Vlasov@baikalelectronics.ru>
      Signed-off-by: default avatarSerge Semin <Sergey.Semin@baikalelectronics.ru>
      Reviewed-by: default avatarAndy Shevchenko <andriy.shevchenko@linux.intel.com>
      Link: https://lore.kernel.org/r/20200515104758.6934-4-Sergey.Semin@baikalelectronics.ruSigned-off-by: default avatarMark Brown <broonie@kernel.org>
      0327f0b8
    • Serge Semin's avatar
      spi: dw: Initialize paddr in DW SPI MMIO private data · 77810d48
      Serge Semin authored
      This field is used only for the DW SPI DMA code initialization, that's
      why there were no problems with it being uninitialized in Dw SPI MMIO
      driver. Since in a further patch we are going to introduce the DW SPI DMA
      support in the MMIO version of the driver, lets set the field with the
      physical address of the DW SPI controller registers region.
      Co-developed-by: default avatarGeorgy Vlasov <Georgy.Vlasov@baikalelectronics.ru>
      Co-developed-by: default avatarRamil Zaripov <Ramil.Zaripov@baikalelectronics.ru>
      Signed-off-by: default avatarGeorgy Vlasov <Georgy.Vlasov@baikalelectronics.ru>
      Signed-off-by: default avatarRamil Zaripov <Ramil.Zaripov@baikalelectronics.ru>
      Signed-off-by: default avatarSerge Semin <Sergey.Semin@baikalelectronics.ru>
      Reviewed-by: default avatarAndy Shevchenko <andriy.shevchenko@linux.intel.com>
      Link: https://lore.kernel.org/r/20200515104758.6934-12-Sergey.Semin@baikalelectronics.ruSigned-off-by: default avatarMark Brown <broonie@kernel.org>
      77810d48
    • Serge Semin's avatar
      spi: dw: Fix native CS being unset · 9aea644c
      Serge Semin authored
      Commit 6e0a32d6 ("spi: dw: Fix default polarity of native
      chipselect") attempted to fix the problem when GPIO active-high
      chip-select is utilized to communicate with some SPI slave. It fixed
      the problem, but broke the normal native CS support. At the same time
      the reversion commit ada9e3fc ("spi: dw: Correct handling of native
      chipselect") didn't solve the problem either, since it just inverted
      the set_cs() polarity perception without taking into account that
      CS-high might be applicable. Here is what is done to finally fix the
      problem.
      
      DW SPI controller demands any native CS being set in order to proceed
      with data transfer. So in order to activate the SPI communications we
      must set any bit in the Slave Select DW SPI controller register no
      matter whether the platform requests the GPIO- or native CS. Preferably
      it should be the bit corresponding to the SPI slave CS number. But
      currently the dw_spi_set_cs() method activates the chip-select
      only if the second argument is false. Since the second argument of the
      set_cs callback is expected to be a boolean with "is-high" semantics
      (actual chip-select pin state value), the bit in the DW SPI Slave
      Select register will be set only if SPI core requests the driver
      to set the CS in the low state. So this will work for active-low
      GPIO-based CS case, and won't work for active-high CS setting
      the bit when SPI core actually needs to deactivate the CS.
      
      This commit fixes the problem for all described cases. So no matter
      whether an SPI slave needs GPIO- or native-based CS with active-high
      or low signal the corresponding bit will be set in SER.
      Signed-off-by: default avatarSerge Semin <Sergey.Semin@baikalelectronics.ru>
      Fixes: ada9e3fc ("spi: dw: Correct handling of native chipselect")
      Fixes: 6e0a32d6 ("spi: dw: Fix default polarity of native chipselect")
      Reviewed-by: default avatarCharles Keepax <ckeepax@opensource.cirrus.com>
      Reviewed-by: default avatarAndy Shevchenko <andriy.shevchenko@linux.intel.com>
      Acked-by: default avatarLinus Walleij <linus.walleij@linaro.org>
      
      Link: https://lore.kernel.org/r/20200515104758.6934-5-Sergey.Semin@baikalelectronics.ruSigned-off-by: default avatarMark Brown <broonie@kernel.org>
      9aea644c
  5. 12 May, 2020 2 commits
  6. 11 May, 2020 4 commits
  7. 07 May, 2020 2 commits
  8. 06 May, 2020 10 commits