David Howells says:

====================
rxrpc: Tracing updates

Here are some patches that update tracing in AF_RXRPC and AFS:

 (1) Add a tracepoint for tracking resend events.

 (2) Use debug_ids in traces rather than pointers (as pointers are now hashed)
     and allow use of the same debug_id in AFS calls as in the corresponding
     AF_RXRPC calls.  This makes filtering the trace output much easier.

 (3) Add a tracepoint for tracking call completion.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

Add support for the National Instruments XGE 1/10G network device.

It uses the EEPROM on the board via NVMEM.
Signed-off-by: Moritz Fischer <mdf@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

This adds bindings for the NI XGE 1G/10G network device.
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Moritz Fischer <mdf@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

Steffen Klassert says:

====================
pull request (net-next): ipsec-next 2018-03-29

1) Remove a redundant pointer initialization esp_input_set_header().
   From Colin Ian King.

2) Mark the xfrm kmem_caches as __ro_after_init.
   From Alexey Dobriyan.

3) Do the checksum for an ipsec offlad packet in software
   if the device does not advertise NETIF_F_HW_ESP_TX_CSUM.
   From Shannon Nelson.

4) Use booleans for true and false instead of integers
   in xfrm_policy_cache_flush().
   From Gustavo A. R. Silva

Please pull or let me know if there are problems.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

Add a tracepoint to track rxrpc calls moving into the completed state and
to log the completion type and the recorded error value and abort code.
Signed-off-by: David Howells <dhowells@redhat.com>

In rxrpc and afs, use the debug_ids that are monotonically allocated to
various objects as they're allocated rather than pointers as kernel
pointers are now hashed making them less useful.  Further, the debug ids
aren't reused anywhere nearly as quickly.

In addition, allow kernel services that use rxrpc, such as afs, to take
numbers from the rxrpc counter, assign them to their own call struct and
pass them in to rxrpc for both client and service calls so that the trace
lines for each will have the same ID tag.
Signed-off-by: David Howells <dhowells@redhat.com>

Add a tracepoint to trace packet resend events and to dump the Tx
annotation buffer for added illumination.
Signed-off-by: David Howells <dhowells@rdhat.com>

Edward Cree says:

====================
sfc: rework locking around filter management

The use of a spinlock to protect filter state combined with the need for a
 sleeping operation (MCDI) to apply that state to the NIC (on EF10) led to
 unfixable race conditions, around the handling of filter restoration after
 an MC reboot.
So, this patch series removes the requirement to be able to modify the SW
 filter table from atomic context, by using a workqueue to request
 asynchronous filter operations (which are needed for ARFS).  Then, the
 filter table locks are changed to mutexes, replacing the dance of spinlocks
 and 'busy' flags.  Also, a mutex is added to protect the RSS context state,
 since otherwise a similar race is possible around restoring that after an
 MC reboot.  While we're at it, fix a couple of other related bugs.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

The FLOW_RSS flag was causing us to insert UDP filters when TCP was wanted.

Fixes: 42356d9a ("sfc: support RSS spreading of ethtool ntuple filters")
Signed-off-by: Edward Cree <ecree@solarflare.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Otherwise races are possible between ethtool ops and
 efx_ef10_rx_restore_rss_contexts().
Also, don't try to perform the restore on every reset, only after an MC
 reboot, otherwise we'll leak RSS contexts on the NIC.

Fixes: 42356d9a ("sfc: support RSS spreading of ethtool ntuple filters")
Signed-off-by: Edward Cree <ecree@solarflare.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

If some other operation gets the MCDI lock ahead of us and performs an MC
 reboot, then our attempt to insert the filter will fail with EINVAL,
 because the destination VI (spec->dmaq_id, MC_CMD_FILTER_OP_IN_RX_QUEUE) does
 not exist.  But the caller's request (which might e.g. be an ethtool ntuple
 request from userland) isn't invalid, it just got unlucky; so return EAGAIN.
Signed-off-by: Edward Cree <ecree@solarflare.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

With this change, the spinlock efx->filter_lock is no longer used and is
 thus removed.
Signed-off-by: Edward Cree <ecree@solarflare.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

efx->filter_lock remains in place for use on farch, but EF10 now ignores it.
EFX_EF10_FILTER_FLAG_BUSY is no longer needed, hence it is removed.
Signed-off-by: Edward Cree <ecree@solarflare.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Instead of having an efx->type->filter_rfs_insert() method, just use
 workitems with a worker function that calls efx->type->filter_insert().
The only user of this is efx_filter_rfs(), which now queues a call to
 efx_filter_rfs_work().
Similarly, efx_filter_rfs_expire() is now a worker function called on a
 new channel->filter_work work_struct, so the method
 efx->type->filter_rfs_expire_one() is no longer called in atomic context.
 We also add a new mutex efx->rps_mutex to protect the RPS state (efx->
 rps_expire_channel, efx->rps_expire_index, and channel->rps_flow_id) so
 that the taking of efx->filter_lock can be moved to
 efx->type->filter_rfs_expire_one().
Thus, all filter table functions are now called in a sleepable context,
 allowing them to use sleeping locks in a future patch.
Signed-off-by: Edward Cree <ecree@solarflare.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Kirill Tkhai says:

====================
Make pernet_operations always read locked

All the pernet_operations are converted, and the last one
is in this patchset (nfsd_net_ops acked by J. Bruce Fields).
So, it's the time to kill pernet_operations::async field,
and make setup_net() and cleanup_net() always require
the rwsem only read locked.

All further pernet_operations have to be developed to fit
this rule. Some of previous patches added a comment to
struct pernet_operations about that.

Also, this patchset renames net_sem to pernet_ops_rwsem
to make the target area of the rwsem is more clear visible,
and adds more comments.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

This adds comments to different places to improve
readability.
Signed-off-by: Kirill Tkhai <ktkhai@virtuozzo.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

net_sem is some undefined area name, so it will be better
to make the area more defined.

Rename it to pernet_ops_rwsem for better readability and
better intelligibility.
Signed-off-by: Kirill Tkhai <ktkhai@virtuozzo.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Synchronous pernet_operations are not allowed anymore.
All are asynchronous. So, drop the structure member.
Signed-off-by: Kirill Tkhai <ktkhai@virtuozzo.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

All pernet_operations are reviewed and converted, hooray!
Reflect this in core code: setup_net() and cleanup_net()
will take down_read() always.
Signed-off-by: Kirill Tkhai <ktkhai@virtuozzo.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

These pernet_operations look similar to rpcsec_gss_net_ops,
they just create and destroy another caches. So, they also
can be async.
Signed-off-by: Kirill Tkhai <ktkhai@virtuozzo.com>
Acked-by: J. Bruce Fields <bfields@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Use relaxed I/O on the hot path. This achieves significant performance
improvements. On a 10G link, this makes a basic iperf TCP test go from
an average of 4.5 Gbits/sec to about 9.40 Gbits/sec.
Signed-off-by: Yan Markman <ymarkman@marvell.com>
[Maxime: Commit message, cosmetic changes]
Signed-off-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Saeed Mahameed says:

====================
mlx5-updates-2018-03-22 (Misc updates)

This series includes misc updates for mlx5 core and netdev dirver,

Highlights:

From Inbar, three patches to add support for PFC stall prevention
statistics and enable/disable through new ethtool tunable, as requested
from previous submission.

From Moshe, four patches, added more drop counters:
	- drop counter for netdev steering miss
	- drop counter for when VF logical link is down
        - drop counter for when netdev logical link is down.

From Or, three patches to support vlan push/pop offload via tc HW action,
for newer HW (Connectx-5 and onward) via HW steering flow actions rather
than the emulated path for the older HW brands.

And five more misc small trivial patches.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

Napi is checking Tx queue status and waking the Tx queue if required.
Same operation is being done while freeing every Tx buffer.
So removed the duplicate operation of checking Tx queue status from the Tx
buffer free functions.
Signed-off-by: Intiyaz Basha <intiyaz.basha@cavium.com>
Signed-off-by: Felix Manlunas <felix.manlunas@cavium.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Remove local ADBG macro and use netdev_dbg/pr_debug

Miscellanea:

o Remove unnecessary debug message after allocation failure as there
  already is a dump_stack() on the failure paths
o Leave the allocation failure message on snmp6_alloc_dev as there
  is one code path that does not do a dump_stack()
Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

If tdc is executing test cases inside a namespace, only the
first command in a compound statement will be executed inside
the namespace by tdc. As a result, the subsequent commands
are not executed inside the namespace and the test will fail.

Example:

for i in {x..y}; do args="foo"; done && tc actions add $args

The namespace execution feature will prepend 'ip netns exec'
to the command:

ip netns exec tcut for i in {x..y}; do args="foo"; done && \
  tc actions add $args

So the actual tc command is not parsed by the shell as being
part of the namespace execution.

Enclosing these compound statements inside a bash invocation
with proper escape characters resolves the problem by creating
a subshell inside the namespace.
Signed-off-by: Lucas Bates <lucasb@mojatatu.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Fixes the following sparse warning:

net/tipc/node.c:336:18: warning:
 symbol 'tipc_node_create' was not declared. Should it be static?
Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com>
Acked-by: Jon Maloy <jon.maloy@ericsson.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Release alloced resource before return from the error handling
case in tipc_udp_enable(), otherwise will cause memory leak.

Fixes: 52dfae5c ("tipc: obtain node identity from interface by default")
Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com>
Acked-by: Jon Maloy <jon.maloy@ericsson.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Fixes the following sparse warning:

drivers/net/ethernet/aquantia/atlantic/hw_atl/hw_atl_utils.c:508:5: warning:
 symbol 'hw_atl_utils_mpi_set_speed' was not declared. Should it be static?
Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Maxime Chevallier says:

====================
net: mvpp2: Remove unnecessary dynamic allocs

Some utility functions in mvpp2 make use of dynamic alloc to exchange temporary
objects representing Parser Entries (which are generic filtering entries in the
PPv2 controller).

These objects are small (44 bytes each), we can use the stack to exchange them.

Some previous discussion on this topic showed that the mvpp2_prs_hw_read, which
initializes a struct mvpp2_prs_entry based on one of its fields, can easily lead
to erroneous code if we don't zero-out the struct beforehand :

https://lkml.org/lkml/2018/3/21/739

To fix this, I propose to rename mvpp2_prs_hw_read into mvpp2_prs_init_from_hw,
make it zero-out the struct and take the index as a parameter. That's what's
done in the first patch of the series.

The second patch is the V3 of
("net: mvpp2: Don't use dynamic allocs for local variables"), making use of
mvpp2_prs_init_from_hw and taking previous comments into account.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

Some helper functions that search for given entries in the TCAM filter
on PPv2 controller make use of dynamically alloced temporary variables,
allocated with GFP_KERNEL. These functions can be called in atomic
context, and dynamic alloc is not really needed in these cases anyways.

This commit gets rid of dynamic allocs and use stack allocation in the
following functions, and where they're used :
 - mvpp2_prs_flow_find
 - mvpp2_prs_vlan_find
 - mvpp2_prs_double_vlan_find
 - mvpp2_prs_mac_da_range_find

For all these functions, instead of returning an temporary object
representing the TCAM entry, we simply return the TCAM id that matches
the requested entry.
Signed-off-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

The mvpp2_prs_hw_read function uses the 'index' field of the struct
mvpp2_prs_entry to initialize the rest of the fields. This makes it
unclear from a caller's perspective, who needs to manipulate a struct
that is not entirely initialized.

This commit makes it an init function for prs_entry, by passing it the
index as a parameter. The function now zeroes the entry, and sets the
index field before doing all other init from HW.

The function is renamed 'mvpp2_prs_init_from_hw' to make that clear.
Signed-off-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

The call to nla_nest_start calls nla_put which can lead to a NULL
return so it's possible for attr to become NULL and we can potentially
get a NULL pointer dereference on attr.  Fix this by checking for
a NULL return.

Detected by CoverityScan, CID#1466125 ("Dereference null return")

Fixes: 955dc68c ("net/ncsi: Add generic netlink family")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

After Commit dae399d7 ("sctp: hold transport instead of assoc
when lookup assoc in rx path"), it put transport instead of asoc
in sctp_has_association. Variable 'asoc' is not used any more.

So this patch is to remove it, while at it,  it also changes the
return type of sctp_has_association to bool, and does the same
for it's caller sctp_endpoint_is_peeled_off.
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Acked-by: Neil Horman <nhorman@tuxdriver.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Jeff Kirsher says:

====================
40GbE Intel Wired LAN Driver Updates 2018-03-26

This series contains updates to i40e only.

Jake provides several patches which remove the need for cmpxchg64(),
starting with moving I40E_FLAG_[UDP]_FILTER_SYNC from pf->flags to pf->state
since they are modified during run time possibly when the RTNL lock is not
held so they should be a state bits and not flags.  Moved additional
"flags" which should be state fields, into pf->state.  Ensure we hold
the RTNL lock for the entire sequence of preparing for reset and when
resuming, which will protect the flags related to interrupt scheme under
RTNL lock so that their modification is properly threaded.  Finally,
cleanup the use of cmpxchg64() since it is no longer needed.  Cleaned up
the holes in the feature flags created my moving some flags to the state
field.

Björn Töpel adds XDP_REDIRECT support as well as tweaking the page
counting for XDP_REDIRECT so that it will function properly.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

Jeff Kirsher says:

====================
100GbE Intel Wired LAN Driver Updates 2018-03-26

This patch series adds the ice driver, which will support the Intel(R)
E800 Series of network devices.

This is the first phase in the release of this driver where we implement
basic transmit and receive. The idea behind the multi-phase release is to
aid in code review as well as testing. Subsequent phases will implement
advanced features (like SR-IOV, tunnelling, flow director, QoS, etc.) that
build upon the previous phase(s). Each phase will be submitted as a patch
series.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

The driver now acts upon the XDP_REDIRECT return action. Two new ndos
are implemented, ndo_xdp_xmit and ndo_xdp_flush.

XDP_REDIRECT action enables XDP program to redirect frames to other
netdevs.
Signed-off-by: Björn Töpel <bjorn.topel@intel.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>

This commit tweaks the page counting for XDP_REDIRECT to function
properly. XDP_REDIRECT support will be added in a future commit.

The current page counting scheme assumes that the reference count
cannot decrease until the received frame is sent to the upper layers
of the networking stack. This assumption does not hold for the
XDP_REDIRECT action, since a page (pointed out by xdp_buff) can have
its reference count decreased via the xdp_do_redirect call.

To work around that, we now start off by a large page count and then
don't allow a refcount less than two.
Signed-off-by: Björn Töpel <bjorn.topel@intel.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>

Remove the gaps created by the recent refactor of various feature flags
that have moved to the state field. Use only a u32 now that we have
fewer than 32 flags in the field.
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>

Now that the only places which modify flags are either (a) during
initialization prior to creating a netdevice, or (b) while holding the
rtnl lock, we no longer need the cmpxchg64 call in i40e_set_priv_flags.
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>

When we suspend and resume, we need to clear and re-enable the interrupt
scheme. This was previously not done while holding the RTNL lock, which
could be problematic, because we are actually destroying and re-creating
queues.

Hold the RTNL lock for the entire sequence of preparing for reset, and
when resuming. This additionally protects the flags related to interrupt
scheme under RTNL lock so that their modification is properly threaded.

This is part of a larger effort to remove the need for cmpxchg64 in
i40e_set_priv_flags().
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>