- 21 Nov, 2014 2 commits
-
-
Markus Elfring authored
The vfree() function performs also input parameter validation. Thus the test around the call is not needed. This issue was detected by using the Coccinelle software. Signed-off-by:
Markus Elfring <elfring@users.sourceforge.net> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
-
- 20 Nov, 2014 3 commits
-
-
David S. Miller authored
Xie Jianhua says: ==================== bonding: Introduce 4 AD link speed The speed field of AD Port Key was based on bitmask, it supported 5 kinds of link speed at most, as there were only 5 bits in the speed field of the AD Port Key. This patches series change the speed type (AD_LINK_SPEED_BITMASK) from bitmask to enum type in order to enhance speed type from 5 to 32, and then introduce 4 AD link speed to fix agg_bandwidth. ==================== Signed-off-by: -
Jianhua Xie authored
This patch adds [2.5|20|40|56] Gbps enum definition, and fixes aggregated bandwidth calculation based on above slave links. CC: Jay Vosburgh <j.vosburgh@gmail.com> CC: Veaceslav Falico <vfalico@gmail.com> CC: Andy Gospodarek <andy@greyhouse.net> CC: David S. Miller <davem@davemloft.net> Signed-off-by:
Jianhua Xie <jianhua.xie@freescale.com> Signed-off-by:
-
Jianhua Xie authored
Port Key was determined as 16 bits according to the link speed, duplex and user key (which is yet not supported). In the old speed field, 5 bits are for speed [1|10|100|1000|10000]Mbps as below: -------------------------------------------------------------- Port key :| User key | Speed | Duplex| -------------------------------------------------------------- 16 6 1 0 This patch keeps the old layout, but changes AD_LINK_SPEED_BITMASK from bit type to an enum type. In this way, the speed field can expand speed type from 5 to 32. CC: Jay Vosburgh <j.vosburgh@gmail.com> CC: Veaceslav Falico <vfalico@gmail.com> CC: Andy Gospodarek <andy@greyhouse.net> CC: David S. Miller <davem@davemloft.net> Signed-off-by:
-
- 19 Nov, 2014 14 commits
-
-
Al Viro authored
no callers since 3.0 Signed-off-by:Al Viro <viro@zeniv.linux.org.uk>
-
Al Viro authored
... and do the same on the compat side of things. Signed-off-by: -
Al Viro authored
use {compat_,}rw_copy_check_uvector(). As the result, we are guaranteed that all iovecs seen in ->msg_iov by ->sendmsg() and ->recvmsg() will pass access_ok(). Signed-off-by: -
Al Viro authored
Kernel-side struct msghdr is (currently) using the same layout as userland one, but it's not a one-to-one copy - even without considering 32bit compat issues, we have msg_iov, msg_name and msg_control copied to kernel[1]. It's fairly localized, so we get away with a few functions where that knowledge is needed (and we could shrink that set even more). Pretty much everything deals with the kernel-side variant and the few places that want userland one just use a bunch of force-casts to paper over the differences. The thing is, kernel-side definition of struct msghdr is *not* exposed in include/uapi - libc doesn't see it, etc. So we can add struct user_msghdr, with proper annotations and let the few places that ever deal with those beasts use it for userland pointers. Saner typechecking aside, that will allow to change the layout of kernel-side msghdr - e.g. replace msg_iov/msg_iovlen there with struct iov_iter, getting rid of the need to modify the iovec as we copy data to/from it, etc. We could introduce kernel_msghdr instead, but that would create much more noise - the absolute majority of the instances would need to have the type switched to kernel_msghdr and definition of struct msghdr in include/linux/socket.h is not going to be seen by userland anyway. This commit just introduces user_msghdr and switches the few places that are dealing with userland-side msghdr to it. [1] actually, it's even trickier than that - we copy msg_control for sendmsg, but keep the userland address on recvmsg. Signed-off-by: -
Alexei Starovoitov authored
- fix NULL pointer dereference: kernel/bpf/arraymap.c:41 array_map_alloc() error: potential null dereference 'array'. (kzalloc returns null) kernel/bpf/arraymap.c:41 array_map_alloc() error: we previously assumed 'array' could be null (see line 40) - integer overflow check was missing in arraymap (hashmap checks for overflow via kmalloc_array()) - arraymap can round_up(value_size, 8) to zero. check was missing. - hashmap was missing zero size check as well, since roundup_pow_of_two() can truncate into zero - found a typo in the arraymap comment and unnecessary empty line Fix all of these issues and make both overflow checks explicit U32 in size. Reported-by:
kbuild test robot <fengguang.wu@intel.com> Signed-off-by:
Alexei Starovoitov <ast@plumgrid.com> Signed-off-by:
-
Markus Elfring authored
The __module_get() function tests whether its argument is NULL and then returns immediately. Thus the test around the call is not needed. This issue was detected by using the Coccinelle software. Signed-off-by:
-
Markus Elfring authored
The proc_remove() function tests whether its argument is NULL and then returns immediately. Thus the test around the call is not needed. This issue was detected by using the Coccinelle software. Signed-off-by:
-
Sudip Mukherjee authored
remove unused variable Signed-off-by:
Sudip Mukherjee <sudip@vectorindia.org> Signed-off-by:
-
David S. Miller authored
Giuseppe Cavallaro says: ==================== stmmac: update driver documentation Recently many changes have been done inside the driver so this patch updates the driver's doc for example reviewing information for the rx and tx processes that are managed by napi method, adding new information for missing glue-logic files etc. Also this reviews and fixes what is reported when run kernel-doc script. ==================== Signed-off-by: -
Giuseppe CAVALLARO authored
When run ./scripts/kernel-doc several warnings are reported so this patch fix them. Also it reviews many comments and adds new ones. Signed-off-by:
Giuseppe Cavallaro <peppe.cavallaro@st.com> Signed-off-by:
-
Giuseppe CAVALLARO authored
This patch adds some useful comments inside the common header file to provide information about the APIs exposed by the driver. Signed-off-by:
-
Giuseppe CAVALLARO authored
Recently many changes have been done inside the driver so this patch updates the driver's doc for example reviewing information for the rx and tx processes that are managed by napi method, adding new information for missing glue-logic files etc. Signed-off-by:
-
Eric Dumazet authored
While working on sk_forward_alloc problems reported by Denys Fedoryshchenko, we found that tcp connect() (and fastopen) do not call sk_wmem_schedule() for SYN packet (and/or SYN/DATA packet), so sk_forward_alloc is negative while connect is in progress. We can fix this by calling regular sk_stream_alloc_skb() both for the SYN packet (in tcp_connect()) and the syn_data packet in tcp_send_syn_data() Then, tcp_send_syn_data() can avoid copying syn_data as we simply can manipulate syn_data->cb[] to remove SYN flag (and increment seq) Instead of open coding memcpy_fromiovecend(), simply use this helper. This leaves in socket write queue clean fast clone skbs. This was tested against our fastopen packetdrill tests. Reported-by:
Denys Fedoryshchenko <nuclearcat@nuclearcat.com> Signed-off-by:
Eric Dumazet <edumazet@google.com> Acked-by:
Yuchung Cheng <ycheng@google.com> Signed-off-by:
-
Jason Wang authored
After commit 5d097109 ("tun: only queue packets on device"), NETDEV_TX_OK was returned for dropped packets. This will confuse pktgen since dropped packets were counted as sent ones. Fixing this by returning NET_XMIT_DROP to let pktgen count it as error packet. Cc: Michael S. Tsirkin <mst@redhat.com> Signed-off-by:
Jason Wang <jasowang@redhat.com> Signed-off-by:
-
- 18 Nov, 2014 21 commits
-
-
Rick Jones authored
If icmp_rcv() has successfully processed the incoming ICMP datagram, we should use consume_skb() rather than kfree_skb() because a hit on the likes of perf -e skb:kfree_skb is not called-for. Signed-off-by:
Rick Jones <rick.jones2@hp.com> Signed-off-by:
-
Fabian Frederick authored
Also remove spaces after cast. Signed-off-by:
Fabian Frederick <fabf@skynet.be> Signed-off-by:
-
Fabian Frederick authored
Signed-off-by:
-
Fabian Frederick authored
Signed-off-by:
-
Fabian Frederick authored
Signed-off-by:
-
Fabian Frederick authored
Signed-off-by:
-
Fabian Frederick authored
See Documentation/CodingStyle chapter 6. Signed-off-by:
-
Fabian Frederick authored
Signed-off-by:
-
git://gitorious.org/linux-can/linux-can-nextDavid S. Miller authored
Marc Kleine-Budde says: ==================== this is a pull request of 9 patches for net-next/master. All 9 patches are by Roger Quadros and update the c_can platform driver. First by improving the initialization sequence of the message RAM, making use of syscon/regmap. In the later patches support for various TI SoCs is added. ==================== Signed-off-by: -
David S. Miller authored
Lothar Waßmann says: ==================== net: fec: assorted cleanup patches This patch series is a followup to: <1415350967-2238-1-git-send-email-LW@KARO-electronics.de> [PATCHv4 1/1] net: fec: fix regression on i.MX28 introduced by rx_copybreak support to apply the cleanup patches that were originally sent along with the bugfix patch. ==================== Signed-off-by: -
Lothar Waßmann authored
The return value of swap_buffer() is not used by any caller, thus remove it. Signed-off-by:
Lothar Waßmann <LW@KARO-electronics.de> Signed-off-by:
-
Lothar Waßmann authored
Eliminate the DIV_ROUND_UP() and change the loop counter increment to 4 instead. This results in saving 6 instructions in the functions assembly code. Signed-off-by:
-
Lothar Waßmann authored
when swap_buffer() is being called, we know for sure, that we need to byte swap the data. Furthermore, this function is called for swapping data in both directions. Thus cpu_to_be32() is semantically not correct for all use cases. Use swab32s() to reflect this. Signed-off-by:
-
Lothar Waßmann authored
Signed-off-by:
-
Lothar Waßmann authored
fep->bufdesc_ex is treated as a boolean value, thus declare it as such. Signed-off-by:
-
Lothar Waßmann authored
Signed-off-by:
-
Lothar Waßmann authored
Signed-off-by:
-
Lothar Waßmann authored
consistently use TABs for indentation Signed-off-by:
-
David S. Miller authored
Alexei Starovoitov says: ==================== implementation of eBPF maps v1->v2: renamed flags for MAP_UPDATE_ELEM command to be more concise, clarified commit logs and improved comments in patches 1,3,7 per discussions with Daniel Old v1 cover: this set of patches adds implementation of HASH and ARRAY types of eBPF maps which were described in manpage in commit b4fc1a46("Merge branch 'bpf-next'") The difference vs previous version of these patches from August: - added 'flags' attribute to BPF_MAP_UPDATE_ELEM - in HASH type implementation removed per-map kmem_cache. I was doing kmem_cache_create() for every map to enable selective slub debugging to check for overflows and leaks. Now it's not needed, so just use normal kmalloc() for map elements. - added ARRAY type which was mentioned in manpage, but wasn't public yet - added map testsuite and removed temporary bits from test_stubs Note, eBPF programs cannot be attached to events yet. It will come in the next set. ==================== Signed-off-by:
-
Alexei Starovoitov authored
proper types and function helpers are ready. Use them in verifier testsuite. Remove temporary stubs Signed-off-by:
-
Alexei Starovoitov authored
expose bpf_map_lookup_elem(), bpf_map_update_elem(), bpf_map_delete_elem() map accessors to eBPF programs Signed-off-by:
-
