- 29 Jul, 2005 27 commits
-
-
Andi Kleen authored
Save a byte here and there. Ultimatively useless, but these things always catch my eyes when reading the code so just fix them for now. Also I got at least one patch fixing of them already, which gives a good excuse. Signed-off-by:
Andi Kleen <ak@suse.de> Signed-off-by:
Andrew Morton <akpm@osdl.org> Signed-off-by:
Linus Torvalds <torvalds@osdl.org>
-
Andi Kleen authored
Signed-off-by:
-
Andi Kleen authored
Signed-off-by:
-
Andi Kleen authored
This avoids confusing the disassembler. Costs 2 bytes per BUG. Thanks to Suresh Siddha and Jan Beulich for suggesting suitable instructions. Signed-off-by:
-
Andreas Gruenbacher authored
Icecream preprocesses c sources locally, and sends the result off to a remote host for compiling. It does not recognize includes at assembler level. The fix is to put the assemberincludes an a separate .s file, which will always be assembled locally. Signed-off-by:
Andreas Gruenbacher <agruen@suse.de> Signed-off-by:
-
Andi Kleen authored
Use physical mode instead of logical mode to address more CPUs. This is also used in the CPU hotplug case to avoid a race. Signed-off-by:
-
Andi Kleen authored
Will be obsolete with physflat. Signed-off-by:
-
Andi Kleen authored
Not used anymore since quite some time. Just uses -m32 instead. Signed-off-by:
-
Andi Kleen authored
This patch will create machinecheck sysdev directories per CPU. All of the cpus still share the same ctl banks. When compiled with CONFIG_HOTPLUG_CPU, it will also bring up/down sysdev directories as cpus go up/down. I have tested the patch along with CONFIG_HOTPLUG_CPU option on in 2.6.13-rc1 kernel. Minor changes by AK: remove useless unload function Signed-off-by:
Jacob Shin <jacob.shin@amd.com> Signed-off-by:
-
Andi Kleen authored
From: Keith Manning Print a boot message for hotplug memory zones Signed-off-by:
-
Keith Mannthey authored
Signed-off-by:
-
Andi Kleen authored
Harmless because the kernel didn't use it. Noticed by Travis Betak Signed-off-by:
-
Andi Kleen authored
Signed-off-by:
-
Andi Kleen authored
Signed-off-by:
-
Andi Kleen authored
Were either outdated or misleading. Signed-off-by:
-
Andi Kleen authored
Signed-off-by:
-
Andi Kleen authored
Signed-off-by:
-
Andi Kleen authored
Signed-off-by:
-
Andi Kleen authored
Minor cleanup. Move things into their include files, remove obsolete includes, fix indentation, remove obsolete special cases etc. I also added the per cpu section to asm-generic/sections.h and fixed init/main.c to use it. Signed-off-by:
-
Andi Kleen authored
No need to print kernel addresses there and clarify what the APIC-ID is. Signed-off-by:
-
Andi Kleen authored
Does not change any semantics because numa_add_cpu checks for CPU 0 anyways. Signed-off-by:
-
Andi Kleen authored
Various code needs this information now before the actual SMP bootup. Instead of computing it on the fly while booting the other CPUs set it up now while initial MPtable/MADT parsing. Signed-off-by:
-
Andi Kleen authored
Signed-off-by:
-
Andi Kleen authored
Makes it slightly more efficient. Signed-off-by:
-
Andi Kleen authored
Signed-off-by:
-
Andi Kleen authored
Signed-off-by:
-
Alexander Nyberg authored
When the x86_64 cpu hotplug changes went in it added a check in default_do_nmi() which kills NMI delivery on any CPU but the BSP. The NMI watchdog is brought up quite some time before the online bit is set in num_online_cpus so this won't work very well. The nmi watchdogs on cpus that are not BSP will never be reprogrammed and no NMIs. Why was this check added? How does an offlined cpu receive an NMI? Signed-off-by:
Alexander Nyberg <alexn@telia.com> Cc: Andi Kleen <ak@suse.de> Cc: Andrew Morton <akpm@osdl.org> Cc: Zwane Mwaikambo <zwane@arm.linux.org.uk> Cc: <ashok.raj@intel.com> Signed-off-by:
-
- 28 Jul, 2005 13 commits
-
-
Linus Torvalds authored
-
Joachim Nilsson authored
I ran glade-2 on the glade file, fixed two missing stock icons and cleaned up the C code that inserts the single/split/full modes. The rest of the patch is minor cleanups only. I refrained from using all the included xpm icons in images.c (like qconf.cc does) in favour of using the stock Gtk+ icons instead. Oh, yes there was a "back" bug in split mode that I also removed, oh well... It has been tested with success by several people, including Jesper Juhl, Randy Dunlap and myself. Signed-off-by:
Sam Ravnborg <sam@ravnborg.org> Signed-off-by:
-
Linus Torvalds authored
It may shut up gcc, but it also incorrectly changes the semantics of the smp_call_function() helpers. You can fix the warning other ways if you are interested (create another inline function that takes no arguments and returns zero), but preferably gcc just shouldn't complain about unused return values from statement expressions in the first place.
-
Linus Torvalds authored
-
Steven Rostedt authored
Avoid using "rep scas", just let the compiler select a sequence of regular instructions. Signed-off-by:
Steven Rostedt <rostedt@goodmis.org> Signed-off-by:
-
Richard Henderson authored
Apparently gcc 4.0 complains about "({ 0; });", which leads to -Werror breakage in one of the alpha oprofile modules. One might could argue that this is a gcc bug, in that statement-expressions should be considered to be function-like rather than statement-like for the purposes of this warning. But it's just as easy to use an inline function in the first place, side-stepping the issue. Signed-off-by: -
Bjorn Helgaas authored
If the PCDP supplies parity, use it (only none/even/odd supported), and don't append parity/stop bit arguments unless baud is present. Signed-off-by:
Bjorn Helgaas <bjorn.helgaas@hp.com> Signed-off-by:
-
Tony Luck authored
sys_reboot() now calls device_suspend(), so it is no longer necessary for the e1000 driver to register a reboot notifier [in fact doing so results in e1000_suspend() getting called twice]. (akpm: we need to fast-track this. It's causing ia64 to oops on shutdown) Signed-off-by:
Tony Luck <tony.luck@intel.com> Cc: <cramerj@intel.com> Cc: <john.ronciak@intel.com> Cc: <ganesh.venkatesan@intel.com> Cc: Jeff Garzik <jgarzik@pobox.com> Signed-off-by:
-
James Morris authored
Implement kernel labeling of the MLS (multilevel security) field of security contexts for files which have no existing MLS field. This is to enable upgrades of a system from non-MLS to MLS without performing a full filesystem relabel including all of the mountpoints, which would be quite painful for users. With this patch, with MLS enabled, if a file has no MLS field, the kernel internally adds an MLS field to the in-core inode (but not to the on-disk file). This MLS field added is the default for the superblock, allowing per-mountpoint control over the values via fixed policy or mount options. This patch has been tested by enabling MLS without relabeling its filesystem, and seems to be working correctly. Signed-off-by:
James Morris <jmorris@redhat.com> Signed-off-by:
Stephen Smalley <sds@epoch.ncsc.mil> Signed-off-by:
-
Ian Campbell authored
Signed-off-by:
Ian Campbell <icampbell@arcom.com> Cc: Jeff Garzik <jgarzik@pobox.com> Signed-off-by:
-
Giancarlo Formicuccia authored
This patch: http://marc.theaimsgroup.com/?l=bk-commits-head&m=111955644929114&w=2 uncovered a k7m bios bug, where the VT82C686A router is reported as being "586-compatible". The two chips have different pirq mapping, so this leads to "irq routing conflict" on many pci devices. The suggested fix was discussed with Aleksey Gorelov, who helped me to identify the problem as a probable bios bug. Signed-off-by:
Giancarlo Formicuccia <giancarlo.formicuccia@gmail.com> Cc: Dave Jones <davej@codemonkey.org.uk> Cc: Greg KH <greg@kroah.com> Signed-off-by:
-
Mike Miller authored
This patch adds per disk queue functionality to cciss. Sometime back I submitted a patch but it looks like only part of what I needed. In the 2.6 kernel if we have more than one logical volume the driver will Oops during rmmod. It seems all of the queues actually point back to the same queue. So after deleting the first volume you hit a null pointer on the second one. This has been tested in our labs. There is no difference in performance, it just fixes the Oops. Signed-off-by:
Mike Miller <mike.miller@hp.com> Cc: Jens Axboe <axboe@suse.de> Signed-off-by:
-
Daniel Ritz authored
Older O2Micro bridges have problems with both read prefetch and write burst depending on the combination of the chipset, bridge, cardbus card. safest is to disable read prefetch and write burst on those old bridges. Signed-off-by:
Daniel Ritz <daniel.ritz@gmx.ch> Signed-off-by:
Dominik Brodowski <linux@dominikbrodowski.net> Signed-off-by:
-
