The ADXL345 provides selectable output data rate.  This adds the iio
channel information for the sampling frequency with that feature.

Cc: Eva Rachel Retuya <eraretuya@gmail.com>
Cc: Andy Shevchenko <andy.shevchenko@gmail.com>
Cc: Jonathan Cameron <jic23@kernel.org>
Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

Drop call to of_match_device, which is subsumed by the subsequent
call to of_device_get_match_data.  The code becomes simpler, and a
temporary variable can be dropped.

The semantic match that makes this change is as follows:
(http://coccinelle.lip6.fr/)

// <smpl>
@r@
local idexpression match;
identifier i;
expression x, dev, e, e1;
@@
-        match@i = of_match_device(x, dev);
-        if (match) e = of_device_get_match_data(dev);
-        else e = e1;
+        e = of_device_get_match_data(dev);
+        if (!e) e = e1;

@@
identifier r.i;
@@
- const struct of_device_id *i;
... when != i
// </smpl>
Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

Signed-off-by: Stefan Popa <stefan.popa@analog.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

The AD5758 is a single channel DAC with 16-bit precision which uses the
SPI interface that operates at clock rates up to 50MHz.

The output can be configured as voltage or current and is available on a
single terminal.

Datasheet:
http://www.analog.com/media/en/technical-documentation/data-sheets/ad5758.pdfSigned-off-by: Stefan Popa <stefan.popa@analog.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

In preparation to enabling -Wimplicit-fallthrough, mark switch cases
where we are expecting to fall through.

Warning level 2 was used in this case: -Wimplicit-fallthrough=2
Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

In preparation to enabling -Wimplicit-fallthrough, mark switch cases
where we are expecting to fall through.
Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

Pointers chip_info and spi_dev_id are being assigned but are never used
hence they are redundant and can be removed.

Cleans up clang warning:
warning: variable 'chip_info' set but not used [-Wunused-but-set-variable]
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

Variable shift is being assigned but is never used hence it is
redundant and can be removed.

Cleans up two clang warnings:
warning: variable ‘shift’ set but not used [-Wunused-but-set-variable]
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Reviewed-by: Sean Nyekjaer <sean.nyekjaer@prevas.dk>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

struct i2c_device_id argument of probe() is not used, so use probe_new()
instead.
Signed-off-by: Nikolaus Voss <nikolaus.voss@loewensteinmedical.de>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

Use device_get_match_data API to simplify access to driver data.
Let acpi_device_id table entries point to the same driver data as
of_device_id table entries and uniquify access to driver data by using
device_get_match_data API. Remove unused i2c_device_id .driver_data
fields.
Signed-off-by: Nikolaus Voss <nikolaus.voss@loewensteinmedical.de>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

When the buffer is enabled for ina2xx driver, a dedicated kthread is
invoked to capture mesurement data.  When the buffer is disabled, the
kthread is stopped.

However if the kthread gets register access errors, it immediately exits
and when the malfunctional buffer is disabled, the stale task_struct
pointer is accessed as there is no kthread to be stopped.

A similar issue in the usbip driver is prevented by kthread_get_run and
kthread_stop_put helpers by increasing usage count of the task_struct.
This change applies the same solution.

Cc: Stefan Brüns <stefan.bruens@rwth-aachen.de>
Cc: Jonathan Cameron <jic23@kernel.org>
Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com>
Fixes: c43a102e ("iio: ina2xx: add support for TI INA2xx Power Monitors")
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

The Spreadtrum SC27XX PMICs ADC controller contains 32 channels,
which is used to sample voltages with 12 bits conversion.

[Baolin Wang did lots of improvements]
Signed-off-by: Freeman Liu <freeman.liu@spreadtrum.com>
Signed-off-by: Baolin Wang <baolin.wang@linaro.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

This patch adds the binding documentation for Spreadtrum SC27XX series
PMICs ADC controller device.
Signed-off-by: Baolin Wang <baolin.wang@linaro.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

The ADXL345 provides the offset adjustment registers for each axis.
This adds the iio channel information for the calibraion offsets with
that feature.

Cc: Eva Rachel Retuya <eraretuya@gmail.com>
Cc: Andy Shevchenko <andy.shevchenko@gmail.com>
Cc: Jonathan Cameron <jic23@kernel.org>
Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

Currently the address field in iio_chan_spec is filled with an accel
data register address for the corresponding axis.

In preparation for adding calibration offset support, this sets the
address field to the index of accel data registers instead of the actual
register address.

This change makes it easier to access both accel registers and
calibration offset registers with fewer lines of code as these are
located in X-axis, Y-axis, Z-axis order.

Cc: Eva Rachel Retuya <eraretuya@gmail.com>
Cc: Andy Shevchenko <andy.shevchenko@gmail.com>
Cc: Jonathan Cameron <jic23@kernel.org>
Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

Add a link to the ADXL345 datasheet

Cc: Eva Rachel Retuya <eraretuya@gmail.com>
Cc: Andy Shevchenko <andy.shevchenko@gmail.com>
Cc: Jonathan Cameron <jic23@kernel.org>
Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

Doing some macro replacement to start an array of structures
so it can be reused by manipulating it with different values.
Signed-off-by: Karim Eshapa <karim.eshapa@gmail.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

Remove unrequired whitespace in some declarations,
fix an indentation and remove unrequired blank lines.
Signed-off-by: Michael Straube <straube.linux@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Use the mac_pton() helper to convert the mac address string.

The functions key_char2num() and key_2char2num() are not used
anywhere else and can be removed.

This also has the benefit of validating the input since mac_pton()
returns false if the string is not valid.
Signed-off-by: Michael Straube <straube.linux@gmail.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Use ether_addr_copy() instead of memcpy() to copy the mac address.
Suggested-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: Michael Straube <straube.linux@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Using is_broadcast_ether_addr() and is_zero_ether_addr() instead of
testing each byte of the mac[] array for 0xff and 0x00 shortens the
code and improves readability.

If np == NULL, of_get_property() returns NULL, hence the "np" check
is not needed.

Instead of a fixed default mac address use a random one to reduce the
likelihood of mac address collision.

Thanks to Joe Perches and Dan Carpenter.
Suggested-by: Joe Perches <joe@perches.com>
Suggested-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Michael Straube <straube.linux@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Fix comparsion to NULL issues found by checkpatch.
Use !x instead of x == NULL.
Signed-off-by: Michael Straube <straube.linux@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

random_ether_addr is a #define for eth_random_addr which is
generally preferred in kernel code by ~3:1

Convert the uses of random_ether_addr to enable removing the #define
Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Remove unrequired blank lines after open and before close braces.
Reported by checkpatch.
Signed-off-by: Michael Straube <straube.linux@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Fix two "CHECK: Macro argument 'N' may be better as '(N)' to avoid
precedence issue" messages, reported by checkpatch, by adding
parentheses around the offending macro argument references.
Signed-off-by: Tim Collier <osdevtc@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

checkpatch gives the following message for the p80211rate_to_p2bit
macro:

CHECK: Macro argument reuse 'n' - possible side-effects?

To fix the message, replace the macro with an equivalent inline
function.
Signed-off-by: Tim Collier <osdevtc@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

checkpatch reports a "CHECK" diagnostic for WLAN_CTL_FRAMELEN as the
macro reuses its argument, leading to possible side-effects. Avoid
this by replacing the macro with an equivalent function, named
wlan_ctl_framelen (as recommended in the coding style). All references
to the macro also updated accordingly.
Signed-off-by: Tim Collier <osdevtc@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Fix "CHECK: Alignment should match open parenthesis" reported by
checkpatch.pl.
Signed-off-by: Tim Collier <osdevtc@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

The driver may sleep with holding a spinlock.
The function call path (from bottom to top) in Linux-4.16.7 is:

[FUNC] schedule
drivers/staging/rtlwifi/halmac/rtl_halmac.c, 884:
		schedule in _is_fw_read_cmd_down
drivers/staging/rtlwifi/halmac/rtl_halmac.c, 912:
		_is_fw_read_cmd_down in rtl_halmac_send_h2c
drivers/staging/rtlwifi/halmac/rtl_halmac.c, 907:
		_raw_spin_lock_irqsave in rtl_halmac_send_h2c

To fix this bug, schedule() is replaced with mdelay(1).

This bug is found by my static analysis tool (DSAC-2) and checked by
my code review.
Signed-off-by: Jia-Ju Bai <baijiaju1990@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Improve readability of prism2_add_key:
a) Reduce nesting and removed goto statement by using more return statements.
Signed-off-by: Chris Opperman <eklikeroomys@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

The driver has rather excessive amount of tracing code, which would be
better done using ftrace. This is obviously not a main feature of the
driver, and it should work just as well without it.

Removing it saves over 1300 lines of code and likely makes the driver
a bit faster by avoiding lots of calls into the timekeeping code.

I came across this while cleaning up the last users of the deprecated
getnstimeofday64() function, of which there is one in the now-removed
get_current_time() function of the rtsx driver that was only used for
tracing.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

The BIT macro uses unsigned long which some architectures handle as 32 bit
and therefore might cause macro's shift to overflow when used on a value
equals or larger than 32 (NL80211_STA_INFO_RX_DURATION and afterwards).

Since 'filled' member in station_info changed to u64, BIT_ULL macro
should be used with all NL80211_STA_INFO_* attribute types instead of BIT
to prevent future possible bugs when one will use BIT macro for higher
attributes by mistake.

This commit cleans up all usages of BIT macro with the above field
in cfg80211 by changing it to BIT_ULL instead.
Signed-off-by: Omer Efrat <omer.efrat@tandemg.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

This patch fixes following sparse warning:
Using plain integer as NULL pointer
in drivers/staging/most/dim2/dim2.c
Signed-off-by: Marcin Ciupak <marcin.s.ciupak@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

The function rtw_set_tx_chksum_offload() has empty definition.
Signed-off-by: Michael Straube <straube.linux@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Change comment from 'local variable' to 'global variables'
and change style to comply with coding-style.
Signed-off-by: Henriette Hofmeier <passt@h-hofmeier.de>
Signed-off-by: Florian Harbecke <florian.harbecke@fau.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Remove initializations of global variables with 0.
Criticized by checkpatch.
Signed-off-by: Henriette Hofmeier <passt@h-hofmeier.de>
Signed-off-by: Florian Harbecke <florian.harbecke@fau.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Move open braces of definitions to the next line
to comply with codestyle.
Criticized by checkpatch.
Signed-off-by: Henriette Hofmeier <passt@h-hofmeier.de>
Signed-off-by: Florian Harbecke <florian.harbecke@fau.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

The driver may sleep with holding a spinlock.
The function call paths (from bottom to top) in Linux-4.16.7 are:

[FUNC] kzalloc(GFP_KERNEL)
drivers/staging/rtl8723bs/os_dep/ioctl_linux.c, 323:
		kzalloc in translate_scan
drivers/staging/rtl8723bs/os_dep/ioctl_linux.c, 1554:
		translate_scan in rtw_wx_get_scan
drivers/staging/rtl8723bs/os_dep/ioctl_linux.c, 1533:
		spin_lock_bh in rtw_wx_get_scan

[FUNC] kzalloc(GFP_KERNEL)
drivers/staging/rtl8723bs/os_dep/ioctl_linux.c, 455:
		kzalloc in translate_scan
drivers/staging/rtl8723bs/os_dep/ioctl_linux.c, 1554:
		translate_scan in rtw_wx_get_scan
drivers/staging/rtl8723bs/os_dep/ioctl_linux.c, 1533:
		spin_lock_bh in rtw_wx_get_scan

To fix these bugs, GFP_KERNEL is replaced with GFP_ATOMIC.

These bugs are found by my static analysis tool (DSAC-2) and checked by
my code review.
Signed-off-by: Jia-Ju Bai <baijiaju1990@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

get_monotonic_boottime() is deprecated because it uses the
old 'timespec' structure. This replaces one of the last callers
with a call to ktime_get_boottime, which also simplifies it
a bit by avoiding a double conversion.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Quytelda Kahja <quytelda@tamalin.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Fix 'braces {} should be used on all arms of this statement' coding
style problem in 'phy_get_tx_pwr_lmt()'.
Signed-off-by: Quytelda Kahja <quytelda@tamalin.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>