- 25 Mar, 2013 40 commits
-
-
Hans Verkuil authored
No code change, just fixing a wrong indentation. Signed-off-by:
Hans Verkuil <hans.verkuil@cisco.com> Reviewed-by:
Devin Heitmueller <dheitmueller@kernellabs.com> Signed-off-by:
Mauro Carvalho Chehab <mchehab@redhat.com>
-
Hans Verkuil authored
- define an initial frequency - return an error if g_frequency is called for an invalid tuner index - get the clamped frequency value after setting it: i.e. the tuner driver may clamp the given frequency to a valid frequency range and ctrl_freq should get that actual clamped frequency. - remove obsolete tuner type checks (done by the core). Signed-off-by:
-
Hans Verkuil authored
Signed-off-by:
-
Hans Verkuil authored
Signed-off-by:
-
Hans Verkuil authored
Signed-off-by:
-
Hans Verkuil authored
And update the other debug ioctls accordingly. Signed-off-by:
-
Hans Verkuil authored
Add support for vidioc_g_chip_name, allowing AC97 to be implemented as a second chip on the bridge with the name "ac97". v4l2-dbg can just match the name with that string in order to detect a ac97-compliant set of registers. Signed-off-by:
-
Hans Verkuil authored
It was just a placeholder and we want to get rid of the AC97 matching define. Also replace MATCH_HOST with MATCH_BRIDGE since we are here anyway. Signed-off-by:
-
Hans Verkuil authored
Simplify the debugging ioctls by creating the VIDIOC_DBG_G_CHIP_NAME ioctl. This will eventually replace VIDIOC_DBG_G_CHIP_IDENT. Chip matching is done by the name or index of subdevices or an index to a bridge chip. Most of this can all be done automatically, so most drivers just need to provide get/set register ops. In particular, it is now possible to get/set subdev registers without requiring assistance of the bridge driver. Signed-off-by:
-
Hans Verkuil authored
Caught by xmllint. Signed-off-by:
-
Hans Verkuil authored
During the transition to sub-devices several years ago non-subdev drivers had a ' at the end of their driver name to tell them apart from already converted drivers. This check was a left-over from that time and can be removed. Signed-off-by:
-
Tushar Behera authored
In vb2_buffer_done, it would be better the print the value of 'state' (current state of buffer) than to print 'vb->state' which is always VB2_BUF_STATE_ACTIVE. Signed-off-by:
Tushar Behera <tushar.behera@linaro.org> Acked-by:
Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by:
-
Hans Verkuil authored
Signed-off-by:
-
Hans Verkuil authored
Prefix the headers with 'solo6x10-'. Signed-off-by:
-
Hans Verkuil authored
An earlier patch temporarily disabled regional motion detection. This patch adds it back: the 'Motion Detection Enable' control is now a 'Motion Detection Mode'. And to set/get the regional thresholds two new ioctls were added to get/set those thresholds. The BUF_FLAG constants were also updated to prevent clashing with existing buffer flags. Signed-off-by:
-
Hans Verkuil authored
Signed-off-by:
-
Hans Verkuil authored
Signed-off-by:
-
Hans Verkuil authored
FMT_MPEG is for multiplexed streams, not elementary streams. The same is true for the V4L2_CID_MPEG_VIDEO_ENCODING control. Signed-off-by:
-
Hans Verkuil authored
Signed-off-by:
-
Hans Verkuil authored
Otherwise the computer will hang. Signed-off-by:
-
Hans Verkuil authored
Signed-off-by:
-
Hans Verkuil authored
Check the result of the dma mapping. Signed-off-by:
-
Hans Verkuil authored
Caused by a missing sysfs_attr_init(). Signed-off-by:
-
Hans Verkuil authored
As a consequence the ioctl op has been replaced by unlocked_ioctl. Since we are now using the core lock the locking scheme has been simplified as well. The main reason for converting this driver to vb2 was that the locking scheme in v4l2.c was hopeless. It was easier to just convert the driver then to try and salvage a threading and videobuf nightmare. The videobuf2 framework is far, far superior compared to the old videobuf. Signed-off-by:
-
Hans Verkuil authored
As a consequence the ioctl op has been replaced by unlocked_ioctl. Since we are now using the core lock the locking scheme has been simplified as well. Signed-off-by:
-
Hans Verkuil authored
All fields in solo_enc_fh do not belong there since they refer to global properties. After moving all these fields to solo_enc_dev the solo_dev_fh struct can be removed completely. Note that this also kills the 'listener' feature of this driver. This feature (where multiple filehandles can read the video) is illegal in the V4L2 API. Do this in userspace: it's much more efficient to copy memory than it is to DMA to every listener. Signed-off-by:
-
Hans Verkuil authored
All fields in solo_dev_fh do not belong there since they refer to global properties. After moving all these fields to solo_dev the solo_dev_fh struct can be removed completely. Signed-off-by:
-
Hans Verkuil authored
Signed-off-by:
-
Hans Verkuil authored
- try_fmt should never return -EBUSY. - invalid pix->field values were not mapped to a valid value. - the priv field of struct v4l2_pix_format wasn't zeroed. - the try_fmt error code was not checked in set_fmt. - enum_framesizes/intervals is valid for both MJPEG and MPEG pixel formats. - enum_frameintervals didn't check width and height and reported the wrong range. - s_parm didn't set readbuffers. - don't fail on invalid colorspace, just replace with the valid colorspace. - bytesperline should be 0 for compressed formats. Signed-off-by:
-
Hans Verkuil authored
Note that the MOTION_THRESHOLD functionality has been temporarily reduced: only the global threshold can be set, not the per-block. This will be addressed in a later patch: controls are not the proper way to do this. Signed-off-by:
-
Hans Verkuil authored
Add support for struct v4l2_device. Signed-off-by:
-
Hans Verkuil authored
Setup correct bus_info, let the v4l2 core set the version and add device_caps support. Also update the module version to 3.0.0 since this is a major upgrade. Signed-off-by:
-
Hans Verkuil authored
Synced to commit e9815ac5503ae60cfbf6ff8037035de8f62e2846 from branch next in git repository https://github.com/bluecherrydvr/solo6x10.git Only removed some code under #if LINUX_VERSION_CODE < some-kernel-version, renamed the driver back to solo6x10 from solo6x10-edge, removed the unnecessary compat.h header and kept the slab.h includes. Otherwise the code is identical. Signed-off-by:
Ismael Luceno <ismael.luceno@corp.bluecherry.net> Signed-off-by:
-
Alexander Shiyan authored
lirc_sir uses the CONFIG_SA1100_BITSY Kconfig macro. But its Kconfig symbol was removed in v2.4.13. So remove dead code associated with it. Signed-off-by:
Paul Bolle <pebolle@tiscali.nl> Signed-off-by:
Alexander Shiyan <shc_work@mail.ru> Signed-off-by:
-
Volokh Konstantin authored
Case: In AdLink MPG24 there is bt878 exists (it captures one frame of all video inputs), Video Signal for it one transmits through tw2804 chip, so we can't control ADC (shut on/off) on tw2804, as some another can use bttv capture way. Signed-off-by:
Volokh Konstantin <volokh84@gmail.com> Signed-off-by:
-
Chen Gang authored
For NUL terminated string, need always set '\0' in the end. Signed-off-by:
Chen Gang <gang.chen@asianux.com> Signed-off-by:
-
Sachin Kamat authored
version.h header inclusion is not necessary as detected by versioncheck. Signed-off-by:
Sachin Kamat <sachin.kamat@linaro.org> Signed-off-by:
-
Hans Verkuil authored
Using two separate tables to setup the registers for 50 or 60 hz is better than the non-const table that is filled in at runtime. Signed-off-by:
-
Hans Verkuil authored
The go7007 driver would continue during probe if no firmware could be loaded. Without firmware the probe() should return an error, so do that. Also move the registration of devices to the end of the probe() sequence: once devices appear the full driver functionality should be available. Signed-off-by:
-
Hans Verkuil authored
Include the patch required to add support for the go7007 to saa7134. To be applied once the driver is moved out of staging. Signed-off-by:
-
