into pobox.com:/garz/repo/net-drivers-2.6

into pobox.com:/garz/repo/net-drivers-2.6

into pobox.com:/garz/repo/net-drivers-2.6

If I want via-rhine to work after resume, I need this patch. It stops
interrupts during suspend and reinitializes them after that.

into pobox.com:/garz/repo/net-drivers-2.6

Signed-off-by: Al Viro <viro@parcelfarce.linux.theplanet.co.uk>

disable_irq() needs asm/irq.h and not everyone who needs it gets it
included indirectly.
Signed-off-by: Al Viro <viro@parcelfarce.linux.theplanet.co.uk>

Here is the hangup implementation for ppp_synctty.c (same as patch
previously for ppp_asynctty.c)

Cc: Alan Cox <alan@lxorguk.ukuu.org.uk>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

into ppc970.osdl.org:/home/torvalds/v2.6/linux

Use %p to print a pointer, so that its length doesn't matter
and so that gcc won't complain.

drivers/mtd/maps/dilnetpc.c:416: warning: long unsigned int format, pointer arg (arg 2)
Signed-off-by: Randy Dunlap <rddunlap@osdl.org>
Signed-off-by: David Woodhouse <dwmw2@infradead.org>

I reviewed, patched, and tested ppp_async.c to implement
ldisc->hangup().  This correctly terminates the PPP connection on
hangup.

Paul Mackerras already did an excellent job of ensuring safe shutdown
and I/O completion in ldisc->close so the change is trivial: just add
the ldisc->hangup and call the existing close routine.

Cc: Alan Cox <alan@lxorguk.ukuu.org.uk>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

into ppc970.osdl.org:/home/torvalds/v2.6/linux

Below is a patch from Denis Zaitsev <zzz@anda.ru> with the following two
adjustments:

- applies with -p1 (not -p0)

- USRobotics -> U.S. Robotics (consistent with the rest of the entries)
Signed-off-by: Adrian Bunk <bunk@stusta.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

The MIPS Makefile was changed so that the offset of data section may not be
dependent on a specific machine header file.
Signed-off-by: Yoichi Yuasa <yuasa@hh.iij4u.or.jp>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

One more place in fs/proc/array.c where ppid is wrong, which I missed in my
previous mail to lkml.
Signed-off-by: Dinakar Guniguntala <dino@in.ibm.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

From: <Urban.Widmark@enlight.net>

The memset is because it was previously possible to send always the same CIFS
fragment and use this to increase the data counters.  When the data counter
"exceeds" the amount of bytes expected this will return the buffer only
partially initialised...  With findfirst etc requests this should allow
leaking kernel memory content.

The other thing is that the data is only returned when data_tot and parm_tot
both "exceed" the expected values.  Previously it was possible to create a
sequence of CIFS fragments that allowed exceeding the counters.  The calling
functions then would believe they received a number of bytes that does not fit
into the allocated buffer.
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

When a system has a very large imbalance of overall memory size to
ZONE_NORMAL (for example when large amounts of numa remap space are in use)
page_writeback_init() may incorrectly set vm_dirty_ratio and
dirty_background_ratio to zero; leading to divide by zero errors elsewhere.
This patch bounds these at 1%.
Signed-off-by: Andy Whitcroft <apw@shadowen.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

Error: ./drivers/media/video/cx88/cx88-video.o .data refers to 0000000000000b28 R_X86_64_64       .exit.text
Signed-off-by: Randy Dunlap <rddunlap@osdl.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

Error: ./drivers/media/dvb/bt8xx/bt878.o .data refers to 0000000000000048 R_X86_64_64       .exit.text
Signed-off-by: Randy Dunlap <rddunlap@osdl.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

Error: ./drivers/media/video/saa7134/saa7134-core.o .data refers to 0000000000000028 R_X86_64_64       .exit.text
Signed-off-by: Randy Dunlap <rddunlap@osdl.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

Here is a patch for M32R SIO driver, which replaces deprecated 
MODULE_PARAM() with modern module_param().

	* drivers/serial/m32r_sio.c:
	- Replace MODULE_PARAM() with module_param().
	- Fix a typo: UARRT_RSA_BASE --> UART_RSA_BASE.
Signed-off-by: Hirokazu Takata <takata@linux-m32r.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

In ia32 emulation, the amd64 kernel refuses the ioctls TIOCSBRK and
TIOCCBRK with EINVAL.  I've attached a patch that adds them to the
compatibility list.

Since all architectures have these ioctls ("m68knommu" inherits them from
"m68k", "um" from its host) and use the same code, I think adding them to
compat_ioctl.h is the correct choice (as opposed to adding them to
arch/x86_64/ia32/ia32_ioctl.c).
Signed-off-by: Werner Almesberger <werner@almesberger.net>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

There seems to have been a couple of thinkos in the NUMA init code, in
particular in find_cpu_node():

* Property size returned is in bytes, not words
* Off-by-one error in loop iteration
Signed-off-by: Nathan Lynch <nathanl@austin.ibm.com>
Signed-off-by: Olof Johansson <olof@austin.ibm.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

When the generic IRQ patch went in, it changed the behaviour of setup_irq
(compared to the previous ppc64 version) in that we now don't call the
handler's enable function if it has a startup function.  The XICS interrupt
controller has a startup function, and so we weren't getting any interrupts
through the XICS because they never got enabled.  This patch adds a call to
xics_enable_irq to xics_startup and fixes the problem.
Signed-off-by: Paul Mackerras <paulus@samba.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

One of the iSeries specific files used HZ without including linux/param.h
and previously got away with it.
Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

Fix ibm44x_common.c compile.
Signed-off-by: Eugene Surovegin <ebs@ebshome.net>
Signed-off-by: Matt Porter <mporter@kernel.crashing.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

Recent changes to arch/ppc/boot/lib/Makefile cause

      CC      arch/ppc/boot/lib/../../../../lib/zlib_inflate/infblock.o
    Assembler messages:
    FATAL: can't create arch/ppc/boot/lib/../../../../lib/zlib_inflate/infblock.o: No such file or directory

when building a ppc kernel using O=$(output_dir) with CONFIG_ZLIB_INFLATE=n,
because the $(output_dir)/lib/zlib_inflate directory doesn't get created.

This patch, which makes arch/ppc/boot/lib/Makefile create the
directory if needed, is one fix for the problem.
Signed-off-by: Roland Dreier <roland@topspin.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

This patch removes the bogus workaround for dcache prefetch beyond the end
of the physical memory.
Signed-off-by: Eugene Surovegin <ebs@ebshome.net>
Signed-off-by: Matt Porter <mporter@kernel.crashing.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

Instead, tty_io.c will always copy user space data to
kernel space, leaving the drivers to worry only about
normal kernel buffers.

No more "from_user" flag, and having the user copy in
each driver.

This cleans up the code and also fixes a number of
locking bugs.

 - Reduce memory use by merging adjacent obsolete raw_node_refs
 - Error handling fixes
 - Respect kmalloc size limit in scan
 - NAND ECC updates
Signed-Off-By: David Woodhouse <dwmw2@infradead.org>

 - Use new RS library for ECC
 - Add support for new NAND flash chips
 - New board support:
   - iPAQ H1910
   - Renesas AG-AND devel board
   - Simtec S3C210 
 - Support for shared controllers on multiple chips.
Signed-Off-By: Thomas Gleixner <tglx@linutronix.de>
Signed-Off-By: David Woodhouse <dwmw2@infradead.org>

Signed-Off-By: David Woodhouse <dwmw2@infradead.org>

Signed-Off-By: Thomas Gleixner <tglx@linutronix.de>
Signed-Off-By: David Woodhouse <dwmw2@infradead.org>

Patch from Todd Poynor
Signed-Off-By: David Woodhouse <dwmw2@infradead.org>

Mostly from Eric Biederman for supporting BIOS flash.

    - Move support firmware hub style lock and unlock into fhw_lock.h (from cfi_cmdset_0002)
    - Move cfi_varsize_frob into cfi_util from cfi_cmdset_0001.c and cfi_cmdset_0002.c
    - reduce gen_probe probe failuers to a debug level message
    - Modify cfi_fixup to take a struct mtd_info instead of a struct map_info
      So that the fixup routines can modify the mtd functions.
    - Modify cfi_cmdset_0001() to allocate and initialize the mtd structure
      before calling cfi_fixup.
    - Modify cfi_cmdset_0002() to allocate and initialize the mtd structure
      before calling cfi_fixup.
    - Refactor the hard coded fixups in cfi_cmdset_0001 and cfi_cmdset_0002
      so the improved cfi_fixup infrastructure.
    - Rewrote amd76xrom and ichxrom.
      They now report their starting physical address in their name.
      They now both handle multiple bankwidth configurations
      They both can create multipe mtd devices.
      They both now assume the rom windows are properly opened by the BIOS
       or whatever runs previous to them.
      Their code is now synchromized so it is almost identical,
         and could be a starting point for a x86_rom_probe.
Signed-Off-By: David Woodhouse <dwmw2@infradead.org>

- Technology Systems TS-5500 board
- Simtec BAST
- IBM 440GX Ocotea
Signed-Off-By: David Woodhouse <dwmw2@infradead.org>

This is sane, as the driver returns the real data and the return 
value is for information of NAND aware filesystems. Userspace 
access to raw NAND is usually restricted to debugging tools which 
are aware of the NAND specific problems.
Signed-Off-By: Thomas Gleixner <tglx@linutronix.de>
Signed-Off-By: David Woodhouse <dwmw2@infradead.org>

Patch from Ben Dooks <ben-mtd@fluff.org>
Signed-Off-By: David Woodhouse <dwmw2@infradead.org>

- Update mporter email address
- Include file fixups
- Tglx's __iomem fixes
Signed-Off-By: David Woodhouse <dwmw2@infradead.org>