- 25 Jun, 2015 2 commits
-
-
Dmitry Torokhov authored
edt-ft5x06 is a touchscreen and thus a direct input device; let's amrk it as such. This also allows us to drop some initialization code as input_init_mt_slots() will do that for us. Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
-
Anshul Garg authored
Instead of iterating over all bits in a bitmap and test them individually let's siwtch to for_each_set_bit() which is more compact and is also faster. Also use bitmap_weight() when counting number of set bits. This also fixes INPUT_DO_TOGGLE() implementation as it should have used *_CNT as the upper boundary, not *_MAX. Signed-off-by: Anshul Garg <aksgarg1989@gmail.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
-
- 24 Jun, 2015 2 commits
-
-
HungNien Chen authored
This is a driver for Weida HiTech WDT87xx series touchscreen controller. Signed-off-by: HungNien Chen <hn.chen@weidahitech.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
-
Hans de Goede authored
Currently we are reporting the button state as inverted on all boards with an axp209 pmic, tested on a ba10-tvbox, bananapi, bananapro, cubietruck and utoo-p66 tablet. The axp209 datasheet clearly states that the power button must be connected between the PWRON key and ground. Which means that on a press we will get a falling edge (dbf) irq not a rising one, and likewise on release we will get a rising edge (dbr) irq, not a falling one. This commit swaps the check for the 2 irqs fixing the inverted reporting of the power button state. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Acked-by: Chen-Yu Tsai <wens@csie.org> Acked-by: Carlo Caione <carlo@caione.org> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
-
- 22 Jun, 2015 3 commits
-
-
Pavel Rojtberg authored
The controller only receives commands when its present. So for the correct LED to be lit the LED command has to be sent on the present event. Signed-off-by: Pavel Rojtberg <rojtberg@gmail.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
-
Pierre-Loup A. Griffais authored
Based on Patch by Pierre-Loup A. Griffais <pgriffais@valvesoftware.com>: Add the logic to set the LEDs on XBox Wireless controllers. Command sequence found by sniffing the Windows data stream when plugging the device in. Updated based on comments on linux-input: unify codepaths in xpad_send_led_command for wired/ wireless controller. Also document command values for clarification. All values tested on Xbox 360 Wireless Controller. Signed-off-by: Pavel Rojtberg <rojtberg@gmail.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
-
Fabio Estevam authored
clk_prepare_enable() may fail, so we should better check its return value and propagate it in the case of error. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
-
- 17 Jun, 2015 2 commits
-
-
Baruch Siach authored
The "INPUT MULTITOUCH (MT) PROTOCOL" entry git tree is not there on git.kernel.org. Signed-off-by: Baruch Siach <baruch@tkos.co.il> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
-
Uwe Kleine-König authored
Since 39b2bbe3 (gpio: add flags argument to gpiod_get*() functions) which appeared in v3.17-rc1, the gpiod_get* functions take an additional parameter that allows to specify direction and initial value for output. Simplify drivers accordingly. Note that in the case of the drv260x driver error checking is more strict now because -ENOSYS is reported to the caller now. But this should only be returned if GPIOLIB is disabled which shouldn't happen as the driver depends on GPIOLIB. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
-
- 16 Jun, 2015 2 commits
-
-
Samuel Thibault authored
In addition to defining triggers for VT LED states, let's define triggers for VT keyboard lock states, such as "kbd-shiftlock", "kbd-altgrlock", etc. This permits to fix #7063 from userland by using a modifier to implement proper CapsLock behavior and have the keyboard caps lock led show that modifier state. Signed-off-by: Samuel Thibault <samuel.thibault@ens-lyon.org> Tested-by: Pavel Machek <pavel@ucw.cz> Acked-by: Pavel Machek <pavel@ucw.cz> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
-
Samuel Thibault authored
Now that input core allows controlling keyboards LEDs via standard LED subsystem triggers let's switch VT keyboard code to make use of this feature. We will define the following standard triggers: "kbd-scrollock", "kbd-numlock", "kbd-capslock", and "kbd-kanalock" which are default triggers for respective LEDs on keyboards. Signed-off-by: Samuel Thibault <samuel.thibault@ens-lyon.org> Tested-by: Pavel Machek <pavel@ucw.cz> Acked-by: Pavel Machek <pavel@ucw.cz> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
-
- 12 Jun, 2015 1 commit
-
-
Samuel Thibault authored
This change creates a new input handler called "leds" that exports LEDs on input devices as standard LED class devices in sysfs and allows controlling their state via sysfs or via any of the standard LED triggers. This allows to re-purpose and reassign LDEs on the keyboards to represent states other than the standard keyboard states (CapsLock, NumLock, etc). The old API of controlling input LEDs by writing into /dev/input/eventX devices is still present and will take precedence over accessing via LEDs subsystem (i.e. it may override state set by a trigger). If input device is "grabbed" then requests coming through LED subsystem will be ignored. Signed-off-by: Samuel Thibault <samuel.thibault@ens-lyon.org> Tested-by: Pavel Machek <pavel@ucw.cz> Acked-by: Pavel Machek <pavel@ucw.cz> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
-
- 11 Jun, 2015 2 commits
-
-
Fabian Frederick authored
Use kernel.h macro definition. Thanks to Julia Lawall for Coccinelle scripting support. Signed-off-by: Fabian Frederick <fabf@skynet.be> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
-
Dmitry Torokhov authored
input_mt_init_slots() will do that for us. Reviewed-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Acked-by: Bastien Nocera <hadess@hadess.net> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
-
- 09 Jun, 2015 6 commits
-
-
Irina Tirdea authored
Goodix touchscreens export through their registers a Product ID and Firmware Version. The Product ID is an ASCII encoding of the product name (e.g.: "911"). Export to sysfs (through the input subsystem) the product id and firmware version read from the device rather than using constant values. Signed-off-by: Octavian Purdila <octavian.purdila@intel.com> Signed-off-by: Irina Tirdea <irina.tirdea@intel.com> Acked-by: Bastien Nocera <hadess@hadess.net> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
-
Irina Tirdea authored
Fix sparse warning: drivers/input/touchscreen/goodix.c:182:26: warning: Variable length array is used. Replace the variable length array with fixed length. Some Goodix devices have maximum 5 touch points, while others have 10 touch points. Using the maximum length (80 bytes) for all devices will lead to wasting 40 bytes on stack when using devices with maximum 5 touch points. However, that is preferable to using kmalloc which will use even more resources. Signed-off-by: Irina Tirdea <irina.tirdea@intel.com> Acked-by: Bastien Nocera <hadess@hadess.net> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
-
Irina Tirdea authored
Fix alignment to match open parenthesis detected by running checkpatch.pl --strict. Signed-off-by: Irina Tirdea <irina.tirdea@intel.com> Acked-by: Bastien Nocera <hadess@hadess.net> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
-
Steve Twiss authored
This adds OnKey driver support for DA9063. Signed-off-by: Steve Twiss <stwiss.opensource@diasemi.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
-
Charlie Mooney authored
Previously the elan_i2c touchpad driver would simply request the firmware "/lib/firmware/elan_i2c.bin", which does not work well if there are multiple such devices in the system. Let's append the "product ID" (by using the same function as the sysfs interface for consistency) to the filename. This results in filenames of the form "/lib/firmware/elan_i2c_72.0.bin", allowing you to support multiple elan_i2c touchpads on the same device by simply naming each device's FW with its corresponding product ID. This way when you trigger a fw update the driver will load the correct binary. Signed-off-by: Charlie Mooney <charliemooney@chromium.org> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
-
Duson Lin authored
In order to support multiple IC types for i2c/smbus protocol, add get ic type command and use this data when checking firmware page count and signature address. Signed-off-by: Duson Lin <dusonlin@emc.com.tw> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
-
- 02 Jun, 2015 2 commits
-
-
Dmitry Tunin authored
Focaltech touchpads report finger width in packet[5] of absolute packet. Range for width in raw format is 0x10 - 0x70. Second half-byte is always 0. 0xff is reported, when a large contact area is detected. This can be handled in userspace. Signed-off-by: Dmitry Tunin <hanipouspilot@gmail.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
-
Arnd Bergmann authored
The platform_sysrq_reset_seq code was intended as a way for an embedded platform to provide its own sysrq sequence at compile time. After over two years, nobody has started using it in an upstream kernel, and the platforms that were interested in it have moved on to devicetree, which can be used to configure the sequence without requiring kernel changes. The method is also incompatible with the way that most architectures build support for multiple platforms into a single kernel. Now the code is producing warnings when built with gcc-5.1: drivers/tty/sysrq.c: In function 'sysrq_init': drivers/tty/sysrq.c:959:33: warning: array subscript is above array bounds [-Warray-bounds] key = platform_sysrq_reset_seq[i]; We could fix this, but it seems unlikely that it will ever be used, so let's just remove the code instead. We still have the option to pass the sequence either in DT, using the kernel command line, or using the /sys/module/sysrq/parameters/reset_seq file. Fixes: 154b7a48 ("Input: sysrq - allow specifying alternate reset sequence") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
-
- 26 May, 2015 4 commits
-
-
Shailendra Verma authored
The variable no_decel is bool type so assigning "true" instead of "1". Also, synaptics_i2c_get_input() has bool return type, so let's use "false" there. Signed-off-by: Shailendra Verma <shailendra.capricorn@gmail.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
-
Shailendra Verma authored
The variable psmouse_smartscroll is bool type so assigning true instead of 1. Signed-off-by: Shailendra Verma <shailendra.capricorn@gmail.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
-
Shailendra Verma authored
Signed-off-by: Shailendra Verma <shailendra.capricorn@gmail.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
-
Dmitry Torokhov authored
The STMPE MFD is only used with device tree configured systems (and STMPE MFD core depends on OF), so force the configuration to come from device tree only. Tested-by: Heiner Kallweit <hkallweit1@gmail.com> Reviewed-by: Marek Vasut <marex@denx.de> Acked-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
-
- 22 May, 2015 3 commits
-
-
Dmitry Torokhov authored
When STMPE is instantiated via device tree individual MFD cells rae formed with OF modaliases, not platform modaliases, and so we need to add OF device table to the driver if we want it to load automatically: of:Nstmpe_touchscreenT<NULL>Cst,stmpe-ts Reported-by: Heiner Kallweit <hkallweit1@gmail.com> Tested-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
-
Rajeev Kumar authored
rajeev-dlh.kumar@st.com email-id doesn't exist anymore as I have left the company. Signed-off-by: Rajeev Kumar <rajeevkumar.linux@gmail.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
-
Khem Raj authored
gcc-5 defaults to gnu11 which used c99 inline semantics in c99 'inline' is not externally visible unlike gnu89, therefore we use 'static inline' which has same semantics between gnu89 and c99 Signed-off-by: Khem Raj <raj.khem@gmail.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
-
- 21 May, 2015 3 commits
-
-
Laurent Pinchart authored
The I2C subsystem can match devices without explicit OF support based on the part of their compatible property after the comma. However, this mechanism uses the first compatible value only. For adxl34x OF device nodes the compatible property will contain the more specific "adi,adxl345" or "adi,adxl346" value first. This prevents the device node from being matched with the adxl34x driver. Fix this by adding an OF match table with an "adi,adxl345" compatible entry. There's no need to add the "adi,adxl346" entry as the ADXL346 is backward-compatible with the ADXL345 with differences handled by runtime detection of the device model. Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Reviewed-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
-
Laurent Pinchart authored
DT nodes should use the more specific adi,adxl345 and adi,adxl346 compatible values instead. As the ADXL346 is backward-compatible with the ADXL345, ADXL346 nodes must list both adi,adxl346 and adi,adxl345, in that order. Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Acked-by: Wolfram Sang <wsa@the-dreams.de> Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
-
Dmitry Torokhov authored
As the name suggests, always_unused argument in cyapa_gen3_set_power_mode() is never used, so there is no reason for setting it to 0. Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
-
- 20 May, 2015 8 commits
-
-
Dmitry Torokhov authored
This makes the intent a tad more clear. Reviewed-by: Javier Martinez Canillas <javier.martinez@collabora.co.uk> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
-
Hans de Goede authored
Now that the generic process_bitmap function has been improved to offer accurate coordinates for the first touch we can use it for v5 (dolphin) touchpads too. Besides being a nice code cleanup this also fixes the saw tooth pattern in the coordinates for the second touch the dolphin specific version had. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
-
Hans de Goede authored
Rename alps_set_abs_params_mt to alps_set_abs_params_semi_mt, to make it clear that it is only (to be) used for semi-mt devices. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
-
Hans de Goede authored
With the recent process_bitmap() changes all semi-mt devices always report the first finger down in slot 0, so stop using input-mt finger tracking for these. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
-
Hans de Goede authored
All alps semi-mt touchpads give us the following data when 2 (or more) fingers are touching: 1 more or less accurate touch for the first finger down, and a bitmap with columns and rows in which 1 or more fingers are seen resulting in a crude (low res) bounding box. So far for v3, rushmore and v4 touchpads we've been reporting the coordinates of 2 opposite corners of the box when 2 fingers are touching. Ignoring the much better resolution data given in the normal position packet. This commit actually uses this data for the first touch, figures out which corner of the bounding box is closest to the first touch, and reports the coordinates of the opposite corner for the second touch, resulting in much better data for the first touch and for the single touch pointer-emulation events. This approach is similar to the one in alps_process_bitmap_dolphin, that function takes the single accurate touch info, calculates the distance to the center of the bounding box, and then puts the 2nd touch mirrored to the center. The downside of that approach is that if both touches move slowly in the same direction, the bounding box will stay the same for a while (as it is low res) and the second touch will thus been seen moving in the opposite direction until the bounding box actually changes, and then the second touch snaps to its new position resulting in a saw tooth pattern in the coordinates for the second touch, hence this new approach. This commit fixes 2 finger scrolling being choppy / jumpy on these touchpads. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
-
Hans de Goede authored
We should decode the position packet before the packet with the bitmap data. This way we can use the more accurate position info in process_bitmap() to get better results. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
-
Hans de Goede authored
Pinnacle / Rushmore packets contain either position info, or bitmap info, never both. So far we've in essence been storing garbage in the position / bitmap fields of the fields struct when decoding a bitmap / pos packet. We've been relying on the following sequence to get away with this: 1) Decode bitmap packet 2) Process bitmap packet 3) Decode position packet 4) Use position / button info This patch allows us to change this sequence, which will allow using the position info when processing the bitmap for more accurate results. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
-
Hans de Goede authored
Change alps_decode_rushmore to do all decoding itself, rather then relying on alps_decode_pinnacle and then overriding some fields + or-ing in some bits. This is a preparation patch for modifying the decode functions to properly differentiate between position and bitmap packets. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
-