- 17 Aug, 2017 21 commits
-
-
Prameela Rani Garnepudi authored
Station id should be set in load key frame configured to device. For WEP mode, key is configured once from mac80211. This key is saved and configured to device every time a station is connected. Signed-off-by:
Prameela Rani Garnepudi <prameela.j04cs@gmail.com> Signed-off-by:
Kalle Valo <kvalo@codeaurora.org>
-
Prameela Rani Garnepudi authored
TX command frame ampdu aggregation parameters is updated to include sta_id for AP mode. Signed-off-by:
Amitkumar Karwar <amit.karwar@redpinesignals.com> Signed-off-by:
-
Prameela Rani Garnepudi authored
Auto rate frame is sent to firmware when a new station is connected. Station id and station's ht capabilities are updated in auto rate command frame. Signed-off-by:
-
Prameela Rani Garnepudi authored
TX command frame auto rate request is modified to use common descriptor struture. Signed-off-by:
-
Prameela Rani Garnepudi authored
Station id needs to be get for data and management frames to fill in the descruptor for AP mode. Few other changes related to AP mode are covered here. Signed-off-by:
-
Prameela Rani Garnepudi authored
When sta_remove of mac80211 is called, driver iterates through list of existing stations to get the station id. Then peer notify is prepared and send to firmare. Signed-off-by:
-
Prameela Rani Garnepudi authored
Station structures are maintained in driver with required fields. When mac80211 callback sta_add is called, driver iterates through list of connected stations to check available index and assigns station id which is important for further communication to that station. Then peer notify frame is send to firmware to inform the firmware about new station connection. Signed-off-by:
-
Prameela Rani Garnepudi authored
Mac80211 config parameter BEACON_ENABLE is handled. When VAP capabilities frame with AP mode is configured to firmware, beacon events start coming to host at each PreTBTT. At this time, beacon is taken from mac80211, descriptor is prepared and send to firmware. Signed-off-by:
-
Prameela Rani Garnepudi authored
remove_interface callback of mac80211 is handled for AP mode. Same is notified to firmware through vap_capabilities frame with VAP status VAP_DELETE. Signed-off-by:
-
Prameela Rani Garnepudi authored
AP mode is handled in add_interface callback of mac80211. Also for AP mode, sending rx filter frame to disallow beacons to host is added. Station structures are initialized to NULL. Signed-off-by:
-
Prameela Rani Garnepudi authored
AP mode support is advertised to cfg80211. Necessary wiphy parameters are initialized. Signed-off-by:
-
Sergey Matyukevich authored
Perform additional reclaim from qtnf_pcie_data_tx. Lock tx_lock serves only reclaim synchronization purposes. Rename it accordingly and improve granularity moving this lock to qtnf_pcie_data_tx_reclaim. Signed-off-by:
Sergey Matyukevich <sergey.matyukevich.os@quantenna.com> Signed-off-by:
-
Sergey Matyukevich authored
Introduce counter for Rx underflow events. Export this counter via debugfs. Signed-off-by:
-
Sergey Matyukevich authored
Current code for both Rx and Tx queue management is a custom and incomplete circular buffer implementation. It makes a lot of sense to switch to kernel built-in circ_buf implementation. Signed-off-by:
-
Sergey Matyukevich authored
Avoid extra buffering in driver by default. Use max hardware Tx queue size. Signed-off-by:
-
Sergey Matyukevich authored
Update PCIE_HDP_TX_HOST_Q_WR_PTR register in skb2rbd_attach as a part of procedure of passing new Rx buffer to hardware. Sync up all the the qtnf_rx_bd descriptor updates before passing Rx buffer to hardware. Signed-off-by:
-
Sergey Matyukevich authored
Replace __dev_alloc_skb and explicit NET_IP_ALIGN alignment by built-in __netdev_alloc_skb_ip_align function. Signed-off-by:
-
Sergey Matyukevich authored
Use napi_gro_receive() rather than netif_receive_skb() to improve performance when GRO is enabled. Signed-off-by:
-
Sergey Matyukevich authored
Signed-off-by:
-
Ganapathi Bhat authored
At the end of user scan request, driver will perform an active scan for hidden SSIDs in passive channels. While doing this, driver unconditionally adding random_mac in scan command, which is no expected. It should add random_mac only if scan_request has NL80211_SCAN_FLAG_RANDOM_ADDR flag set. Signed-off-by:
Ganapathi Bhat <gbhat@marvell.com> Signed-off-by:
-
Ganapathi Bhat authored
Driver should use random MAC address only if the scan is requested by user(provided NL80211_SCAN_FLAG_RANDOM_ADDR is set in scan request). It should not be used for a scan performed before association. Signed-off-by:
-
- 11 Aug, 2017 2 commits
-
-
Kalle Valo authored
Merge tag 'iwlwifi-next-for-kalle-2017-08-11' of git://git.kernel.org/pub/scm/linux/kernel/git/iwlwifi/iwlwifi-next Sencond batch of iwlwifi patches for 4.14 * Some more code moved to a new directory; * Fixes in LED handling; * Some FW API updates; * General fixes and cleanups here and there.
-
Arvind Yadav authored
usb_device_id are not supposed to change at runtime. All functions working with usb_device_id provided by <linux/usb.h> work with const usb_device_id. So mark the non-const structs as const. Signed-off-by:
Arvind Yadav <arvind.yadav.cs@gmail.com> Signed-off-by:
-
- 10 Aug, 2017 17 commits
-
-
Xinming Hu authored
This patch check whether userspace beacon data include country ie, if so then download command to enable 11d setup in firmeare accordingly. Signed-off-by:
Xinming Hu <huxm@marvell.com> Signed-off-by:
Cathy Luo <cluo@marvell.com> Signed-off-by:
-
Arvind Yadav authored
usb_device_id are not supposed to change at runtime. All functions working with usb_device_id provided by <linux/usb.h> work with const usb_device_id. So mark the non-const structs as const. Signed-off-by:
-
Arvind Yadav authored
usb_device_id are not supposed to change at runtime. All functions working with usb_device_id provided by <linux/usb.h> work with const usb_device_id. So mark the non-const structs as const. Signed-off-by:
-
Arvind Yadav authored
usb_device_id are not supposed to change at runtime. All functions working with usb_device_id provided by <linux/usb.h> work with const usb_device_id. So mark the non-const structs as const. Signed-off-by:
-
Arvind Yadav authored
usb_device_id are not supposed to change at runtime. All functions working with usb_device_id provided by <linux/usb.h> work with const usb_device_id. So mark the non-const structs as const. Signed-off-by:
-
Arvind Yadav authored
usb_device_id are not supposed to change at runtime. All functions working with usb_device_id provided by <linux/usb.h> work with const usb_device_id. So mark the non-const structs as const. Signed-off-by:
-
Arvind Yadav authored
usb_device_id are not supposed to change at runtime. All functions working with usb_device_id provided by <linux/usb.h> work with const usb_device_id. So mark the non-const structs as const. Signed-off-by:
-
Arvind Yadav authored
usb_device_id are not supposed to change at runtime. All functions working with usb_device_id provided by <linux/usb.h> work with const usb_device_id. So mark the non-const structs as const. Signed-off-by:
-
Arvind Yadav authored
usb_device_id are not supposed to change at runtime. All functions working with usb_device_id provided by <linux/usb.h> work with const usb_device_id. So mark the non-const structs as const. Signed-off-by:
-
Arvind Yadav authored
usb_device_id are not supposed to change at runtime. All functions working with usb_device_id provided by <linux/usb.h> work with const usb_device_id. So mark the non-const structs as const. Signed-off-by:
-
Arvind Yadav authored
usb_device_id are not supposed to change at runtime. All functions working with usb_device_id provided by <linux/usb.h> work with const usb_device_id. So mark the non-const structs as const. Signed-off-by:
-
Arvind Yadav authored
usb_device_id are not supposed to change at runtime. All functions working with usb_device_id provided by <linux/usb.h> work with const usb_device_id. So mark the non-const structs as const. Signed-off-by:
-
Arvind Yadav authored
usb_device_id are not supposed to change at runtime. All functions working with usb_device_id provided by <linux/usb.h> work with const usb_device_id. So mark the non-const structs as const. Signed-off-by:
-
Arvind Yadav authored
usb_device_id are not supposed to change at runtime. All functions working with usb_device_id provided by <linux/usb.h> work with const usb_device_id. So mark the non-const structs as const. Signed-off-by:
-
Arvind Yadav authored
usb_device_id are not supposed to change at runtime. All functions working with usb_device_id provided by <linux/usb.h> work with const usb_device_id. So mark the non-const structs as const. Signed-off-by:
-
Arvind Yadav authored
usb_device_id are not supposed to change at runtime. All functions working with usb_device_id provided by <linux/usb.h> work with const usb_device_id. So mark the non-const structs as const. Signed-off-by:
-
Arvind Yadav authored
usb_device_id are not supposed to change at runtime. All functions working with usb_device_id provided by <linux/usb.h> work with const usb_device_id. So mark the non-const structs as const. Signed-off-by:
-
