- 25 Nov, 2019 10 commits
-
-
Andrii Nakryiko authored
Initialized global variables are no different in ELF from static variables, and don't require any extra support from libbpf. But they are matching semantics of global data (backed by BPF maps) more closely, preventing LLVM/Clang from aggressively inlining constant values and not requiring volatile incantations to prevent those. This patch enables global variables. It still disables uninitialized variables, which will be put into special COM (common) ELF section, because BPF doesn't allow uninitialized data to be accessed. Signed-off-by: Andrii Nakryiko <andriin@fb.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Link: https://lore.kernel.org/bpf/20191121070743.1309473-5-andriin@fb.com
-
Andrii Nakryiko authored
Fix a bunch of warnings and errors reported by checkpatch.pl, to make it easier to spot new problems. Signed-off-by: Andrii Nakryiko <andriin@fb.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Link: https://lore.kernel.org/bpf/20191121070743.1309473-4-andriin@fb.com
-
Andrii Nakryiko authored
Relocation handling code is convoluted and unnecessarily deeply nested. Split out per-relocation logic into separate function. Also refactor the logic to be more a sequence of per-relocation type checks and processing steps, making it simpler to follow control flow. This makes it easier to further extends it to new kinds of relocations (e.g., support for extern variables). This patch also makes relocation's section verification more robust. Previously relocations against not yet supported externs were silently ignored because of obj->efile.text_shndx was zero, when all BPF programs had custom section names and there was no .text section. Also, invalid LDIMM64 relocations against non-map sections were passed through, if they were pointing to a .text section (or 0, which is invalid section). All these bugs are fixed within this refactoring and checks are made more appropriate for each type of relocation. Signed-off-by: Andrii Nakryiko <andriin@fb.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Link: https://lore.kernel.org/bpf/20191121070743.1309473-3-andriin@fb.com
-
Andrii Nakryiko authored
Add -mattr=dwarfris attribute to llc to avoid having relocations against DWARF data. These relocations make it impossible to inspect DWARF contents: all strings are invalid. Signed-off-by: Andrii Nakryiko <andriin@fb.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Link: https://lore.kernel.org/bpf/20191121070743.1309473-2-andriin@fb.com
-
Andrii Nakryiko authored
Add exra level of verboseness, activated by -vvv argument. When -vv is specified, verbose libbpf and verifier log (level 1) is output, even for successful tests. With -vvv, verifier log goes to level 2. This is extremely useful to debug verifier failures, as well as just see the state and flow of verification. Before this, you'd have to go and modify load_program()'s source code inside libbpf to specify extra log_level flags, which is suboptimal to say the least. Currently -vv and -vvv triggering verifier output is integrated into test_stub's bpf_prog_load as well as bpf_verif_scale.c tests. Signed-off-by: Andrii Nakryiko <andriin@fb.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Link: https://lore.kernel.org/bpf/20191120003548.4159797-1-andriin@fb.com
-
Jakub Kicinski authored
If selftests are copied over to another machine/location for execution the build test of bpftool will obviously not work, since the sources are not copied. Skip it if we can't find bpftool's Makefile. Reported-by: Naresh Kamboju <naresh.kamboju@linaro.org> Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by: Quentin Monnet <quentin.monnet@netronome.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Link: https://lore.kernel.org/bpf/20191119105010.19189-3-quentin.monnet@netronome.com
-
Quentin Monnet authored
The trap on EXIT is used to clean up any temporary directory left by the build attempts. It is not needed when the user simply calls the script with its --help option, and may not be needed either if we add checks (e.g. on the availability of bpftool files) before the build attempts. Let's move this trap and related variables lower down in the code, so that we don't accidentally change the value returned from the script on early exits at pre-checks. Signed-off-by: Quentin Monnet <quentin.monnet@netronome.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Reviewed-by: Jakub Kicinski <jakub.kicinski@netronome.com> Link: https://lore.kernel.org/bpf/20191119105010.19189-2-quentin.monnet@netronome.com
-
Quentin Monnet authored
Building selftests with 'make TARGETS=bpf kselftest' was fixed in commit 55d554f5 ("tools: bpf: Use !building_out_of_srctree to determine srctree"). However, by updating $(srctree) in tools/bpf/Makefile for in-tree builds only, we leave out the case where we pass an output directory to build BPF tools, but $(srctree) is not set. This typically happens for: $ make -s tools/bpf O=/tmp/foo Makefile:40: /tools/build/Makefile.feature: No such file or directory Fix it by updating $(srctree) in the Makefile not only for out-of-tree builds, but also if $(srctree) is empty. Detected with test_bpftool_build.sh. Fixes: 55d554f5 ("tools: bpf: Use !building_out_of_srctree to determine srctree") Signed-off-by: Quentin Monnet <quentin.monnet@netronome.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Jakub Kicinski <jakub.kicinski@netronome.com> Link: https://lore.kernel.org/bpf/20191119105626.21453-1-quentin.monnet@netronome.com
-
Quentin Monnet authored
When building bpftool, a warning was introduced by commit a9436460 ("bpftool: Allow to read btf as raw data"), because the return value from a call to 'read()' is ignored. Let's address it. Signed-off-by: Quentin Monnet <quentin.monnet@netronome.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Reviewed-by: Jakub Kicinski <jakub.kicinski@netronome.com> Acked-by: Andrii Nakryiko <andriin@fb.com> Link: https://lore.kernel.org/bpf/20191119111706.22440-1-quentin.monnet@netronome.com
-
Luc Van Oostenryck authored
xsk_poll() is defined as returning 'unsigned int' but the .poll method is declared as returning '__poll_t', a bitwise type. Fix this by using the proper return type and using the EPOLL constants instead of the POLL ones, as required for __poll_t. Signed-off-by: Luc Van Oostenryck <luc.vanoostenryck@gmail.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Björn Töpel <bjorn.topel@intel.com> Link: https://lore.kernel.org/bpf/20191120001042.30830-1-luc.vanoostenryck@gmail.com
-
- 24 Nov, 2019 20 commits
-
-
Eric Dumazet authored
A patch in net-next triggered a compile error on powerpc: include/linux/u64_stats_sync.h: In function 'u64_stats_read': include/asm-generic/local64.h:30:37: warning: passing argument 1 of 'local_read' discards 'const' qualifier from pointer target type This seems reasonable to relax powerpc local_read() requirements. Fixes: 316580b6 ("u64_stats: provide u64_stats_t type") Signed-off-by: Eric Dumazet <edumazet@google.com> Reported-by: kbuild test robot <lkp@intel.com> Acked-by: Michael Ellerman <mpe@ellerman.id.au> Tested-by: Stephen Rothwell <sfr@canb.auug.org.au> # build only Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
-
Jakub Kicinski authored
Michael Chan says: ==================== bnxt_en: Updates. This patchset contains these main features: 1. Add the proper logic to support suspend/resume on the new 57500 chips. 2. Allow Phy configurations from user on a Multihost function if supported by fw. 3. devlink NVRAM flashing support. 4. Add a couple of chip IDs, PHY loopback enhancement, and provide more RSS contexts to VFs. v2: Dropped the devlink info patches to address some feedback and resubmit for the 5.6 kernel. ==================== Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
-
Vasundhara Volam authored
Use the same bnxt_flash_package_from_file() function to support devlink flash operation. Cc: Jiri Pirko <jiri@mellanox.com> Signed-off-by: Vasundhara Volam <vasundhara-v.volam@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
-
Michael Chan authored
Currently, the driver does not allow PHY settings on a multi-function or NPAR NIC whose port is shared by more than one function. Newer firmware now allows PHY settings on some of these NICs. Check for this new firmware setting and allow the user to set the PHY settings accordingly. Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
-
Michael Chan authored
If the link settings have been changed by another function sharing the port, firmware will send us an async. message. In response, we will call the new bnxt_init_ethtool_link_settings() function to update the current settings. Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
-
Michael Chan authored
Refactor this logic in bnxt_probe_phy() into a separate function bnxt_init_ethtool_link_settings(). It used to be that the settable link settings will never be changed without going through ethtool. So we only needed to do this once in bnxt_probe_phy(). Now, another function sharing the port may change it and we may need to re-initialize the ethtool settings again in run-time. Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
-
Michael Chan authored
New firmware allows PHY loopback to be set without disabling autoneg first. Check this capability and skip disabling autoneg when it is supported by firmware. Using this scheme, loopback will always work even if the PHY only supports autoneg. Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
-
Michael Chan authored
The driver currently only assignes 1 RSS context to each VF. This works for the Linux VF driver. But other drivers, such as DPDK, can make use of additional RSS contexts. Modify the code to divide up and assign RSS contexts to VFs just like other resources. Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
-
Michael Chan authored
Some chips that need host context memory as a backing store requires the memory to be initialized to a non-zero value. Query the value from firmware and initialize the context memory accordingly. Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
-
Vasundhara Volam authored
Driver calls HWRM_FUNC_RESET firmware call while resuming the device which clears the context memory backing store. Because of which allocating firmware resources would eventually fail. Fix it by freeing all context memory during suspend and reallocate the memory during resume. Call bnxt_hwrm_queue_qportcfg() in resume path. This firmware call is needed on the 57500 chips so that firmware will set up the proper queue mapping in relation to the context memory. Signed-off-by: Vasundhara Volam <vasundhara-v.volam@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
-
Vasundhara Volam authored
After driver unregister, firmware is erasing the information that driver supports new resource management. Send FUNC_RESOURCE_QCAPS command to inform the firmware that driver supports new resource management while resuming from hibernation. Otherwise, we fallback to the older resource allocation scheme. Also, move driver register after sending FUNC_RESOURCE_QCAPS command to be consistent with the normal initialization sequence. Signed-off-by: Vasundhara Volam <vasundhara-v.volam@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
-
Vasundhara Volam authored
Everytime driver registers with firmware, driver is required to register for async event notifications as well. These 2 calls are done using the same firmware command and can be combined. We are also missing the 2nd step to register for async events in the suspend/resume path and this will fix it. Prior to this, we were getting only default notifications. ULP can register for additional async events for the RDMA driver, so we add a parameter to the new function to only do step 2 when it is called from ULP. Signed-off-by: Vasundhara Volam <vasundhara-v.volam@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
-
Vasundhara Volam authored
In the bnxt_init_one() failure path, if the driver has already called firmware to register the driver, it is not undoing the driver registration. Add this missing step to unregister for correctness, so that the firmware knows that the driver has unloaded. Signed-off-by: Vasundhara Volam <vasundhara-v.volam@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
-
Michael Chan authored
Disable Bus master during suspend to prevent DMAs after the device goes into D3hot state. The new 57500 devices may continue to DMA from context memory after the system goes into D3hot state. This may cause some PCIe errors on some system. Re-enable it during resume. Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
-
Michael Chan authored
Fix BNXT_CHIP_NUM_5645X() to include 57452 and 56454 chip IDs, so that these chips will be properly classified as P4 chips to take advantage of the P4 fixes and features. Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
-
Jakub Kicinski authored
The rfs members of struct efx_channel are under CONFIG_RFS_ACCEL. Ethtool stats which access those need to be as well. Reported-by: kbuild test robot <lkp@intel.com> Fixes: ca70bd42 ("sfc: add statistics for ARFS") Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
-
Stephen Hemminger authored
The recording of RSS hash should be controlled by NETIF_F_RXHASH. Fixes: 1fac7ca4 ("hv_netvsc: record hardware hash in skb") Suggested-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: Stephen Hemminger <sthemmin@microsoft.com> Signed-off-by: Haiyang Zhang <haiyangz@microsoft.com> Reviewed-by: Michael Kelley <mikelley@microsoft.com> Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
-
Tonghao Zhang authored
Use vlan common api to access the vlan_tag info. Signed-off-by: Tonghao Zhang <xiangxia.m.yue@gmail.com> Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
-
git://git.kernel.org/pub/scm/linux/kernel/git/saeed/linuxJakub Kicinski authored
Saeed Mahameed says: ==================== mlx5-updates-2019-11-22 1) Misc Cleanups 2) Software steering support for Geneve ==================== Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
-
Russell King authored
Rename the mac_link_state() method to mac_pcs_get_state() to make it clear that it should be returning the MACs PCS current state, which is used for inband negotiation rather than just reading back what the MAC has been configured for. Update the documentation to explicitly mention that this is for inband. We drop the return value as well; most of phylink doesn't check the return value and it is not clear what it should do on error - instead arrange for state->link to be false. Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk> Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
-
- 23 Nov, 2019 10 commits
-
-
Taehee Yoo authored
rhashtable_lookup_fast() internally calls rcu_read_lock() then, calls rhashtable_lookup(). So if rcu_read_lock() is already held, rhashtable_lookup() is enough. Signed-off-by: Taehee Yoo <ap420073@gmail.com> Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
-
Jakub Kicinski authored
Merge tag 'wireless-drivers-next-2019-11-22' of git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/wireless-drivers-next Kalle Valo says: ==================== wireless-drivers-next patches for v5.5 Last set of patches for v5.5. Major features here 802.11ax support for qtnfmac and airtime fairness support to mt76. And naturally smaller fixes and improvements all over. Major changes: qtnfmac * add 802.11ax support in AP mode * enable offload bridging support iwlwifi * support TX/RX antennas reporting mt76 * mt7615 smart carrier sense support * aggregation statistics via debugfs * airtime fairness (ATF) support * mt76x0 OF mac address support ==================== Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
-
Jakub Kicinski authored
Robert Schwebel says: ==================== here is v2 of the series converting the NFC documentation from txt to rst. Thanks to Jonathan and Dave for the input. Changes since (implicit) v1: * replace code-block by more compact :: syntax * really add the rst file to the index ==================== Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
-
Robert Schwebel authored
Now that the sphinx syntax has been fixed, change the document from txt to rst and add it to the index. Signed-off-by: Robert Schwebel <r.schwebel@pengutronix.de> Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
-
Robert Schwebel authored
Silence this warning: Documentation/networking/nfc.rst:113: WARNING: Definition list ends without a blank line; unexpected unindent. Signed-off-by: Robert Schwebel <r.schwebel@pengutronix.de> Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
-
Robert Schwebel authored
Fix this warning: Documentation/networking/nfc.rst:87: WARNING: Bullet list ends without a blank line; unexpected unindent. Signed-off-by: Robert Schwebel <r.schwebel@pengutronix.de> Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
-
Robert Schwebel authored
Change the block diagram to match the sphinx syntax. This will make it possible to switch this file to rst in the future. Signed-off-by: Robert Schwebel <r.schwebel@pengutronix.de> Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
-
Robert Schwebel authored
The headlines in this file do are not in the standard kernel docu- mentation headline format. Change it, so this file can be switched to rst in the future. Signed-off-by: Robert Schwebel <r.schwebel@pengutronix.de> Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
-
Russell King authored
When a phydev is created, the speed and duplex are set to zero and -1 respectively, rather than using the predefined SPEED_UNKNOWN and DUPLEX_UNKNOWN constants. There is a window at initialisation time where we may report link down using the 0/-1 values. Tidy this up and use the predefined constants, so debug doesn't complain with: "Unsupported (update phy-core.c)/Unsupported (update phy-core.c)" when the speed and duplex settings are printed. Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk> Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
-
Russell King authored
There are no users of phy_ethtool_sset() in the kernel anymore, and as of commit 3c1bcc86 ("net: ethernet: Convert phydev advertize and supported from u32 to link mode"), the implementation is slightly buggy - it doesn't correctly check the masked advertising mask as it used to. Remove it, and update the phy documentation to refer to its replacement function. Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
-