- 01 Apr, 2009 40 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4Linus Torvalds authored
* 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4: (33 commits) ext4: Regularize mount options ext4: fix locking typo in mballoc which could cause soft lockup hangs ext4: fix typo which causes a memory leak on error path jbd2: Update locking coments ext4: Rename pa_linear to pa_type ext4: add checks of block references for non-extent inodes ext4: Check for an valid i_mode when reading the inode from disk ext4: Use WRITE_SYNC for commits which are caused by fsync() ext4: Add auto_da_alloc mount option ext4: Use struct flex_groups to calculate get_orlov_stats() ext4: Use atomic_t's in struct flex_groups ext4: remove /proc tuning knobs ext4: Add sysfs support ext4: Track lifetime disk writes ext4: Fix discard of inode prealloc space with delayed allocation. ext4: Automatically allocate delay allocated blocks on rename ext4: Automatically allocate delay allocated blocks on close ext4: add EXT4_IOC_ALLOC_DA_BLKS ioctl ext4: Simplify delalloc code by removing mpage_da_writepages() ext4: Save stack space by removing fake buffer heads ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/mason/btrfs-unstableLinus Torvalds authored
* git://git.kernel.org/pub/scm/linux/kernel/git/mason/btrfs-unstable: Btrfs: try to free metadata pages when we free btree blocks Btrfs: add extra flushing for renames and truncates Btrfs: make sure btrfs_update_delayed_ref doesn't increase ref_mod Btrfs: optimize fsyncs on old files Btrfs: tree logging unlink/rename fixes Btrfs: Make sure i_nlink doesn't hit zero too soon during log replay Btrfs: limit balancing work while flushing delayed refs Btrfs: readahead checksums during btrfs_finish_ordered_io Btrfs: leave btree locks spinning more often Btrfs: Only let very young transactions grow during commit Btrfs: Check for a blocking lock before taking the spin Btrfs: reduce stack in cow_file_range Btrfs: reduce stalls during transaction commit Btrfs: process the delayed reference queue in clusters Btrfs: try to cleanup delayed refs while freeing extents Btrfs: reduce stack usage in some crucial tree balancing functions Btrfs: do extent allocation and reference count updates in the background Btrfs: don't preallocate metadata blocks during btrfs_search_slot
-
git://git.kernel.org/pub/scm/linux/kernel/git/bart/ide-2.6Linus Torvalds authored
* git://git.kernel.org/pub/scm/linux/kernel/git/bart/ide-2.6: (59 commits) ide-floppy: do not complete rq's prematurely ide: be able to build pmac driver without IDE built-in ide-pmac: IDE cable detection on Apple PowerBook ide: inline SELECT_DRIVE() ide: turn selectproc() method into dev_select() method (take 5) MAINTAINERS: move old ide-{floppy,tape} entries to CREDITS (take 2) ide: move data register access out of tf_{read|load}() methods (take 2) ide: call {in|out}put_data() methods from tf_{read|load}() methods (take 2) ide-io-std: shorten ide_{in|out}put_data() ide: rename IDE_TFLAG_IN_[HOB_]FEATURE ide: turn set_irq() method into write_devctl() method ide: use ATA_HOB ide-disk: use ATA_ERR ide: add support for CFA specified transfer modes (take 3) ide-iops: only clear DMA words on setting DMA mode ide: identify data word 53 bit 1 doesn't cover words 62 and 63 (take 3) au1xxx-ide: auide_{in|out}sw() should be static ide-floppy: use ide_pio_bytes() ide-{floppy,tape}: fix padding for PIO transfers ide: remove CONFIG_BLK_DEV_IDEDOUBLER config option ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/jbarnes/pci-2.6Linus Torvalds authored
* 'linux-next' of git://git.kernel.org/pub/scm/linux/kernel/git/jbarnes/pci-2.6: (88 commits) PCI: fix HT MSI mapping fix PCI: don't enable too much HT MSI mapping x86/PCI: make pci=lastbus=255 work when acpi is on PCI: save and restore PCIe 2.0 registers PCI: update fakephp for bus_id removal PCI: fix kernel oops on bridge removal PCI: fix conflict between SR-IOV and config space sizing powerpc/PCI: include pci.h in powerpc MSI implementation PCI Hotplug: schedule fakephp for feature removal PCI Hotplug: rename legacy_fakephp to fakephp PCI Hotplug: restore fakephp interface with complete reimplementation PCI: Introduce /sys/bus/pci/devices/.../rescan PCI: Introduce /sys/bus/pci/devices/.../remove PCI: Introduce /sys/bus/pci/rescan PCI: Introduce pci_rescan_bus() PCI: do not enable bridges more than once PCI: do not initialize bridges more than once PCI: always scan child buses PCI: pci_scan_slot() returns newly found devices PCI: don't scan existing devices ... Fix trivial append-only conflict in Documentation/feature-removal-schedule.txt
-
git://git390.marist.edu/pub/scm/linux-2.6Linus Torvalds authored
* 'for-linus' of git://git390.marist.edu/pub/scm/linux-2.6: [S390] cio: online_store - trigger recognition for boxed devices [S390] cio: disallow online setting of device in transient state [S390] cio: introduce notifier for boxed state [S390] cio: introduce ccw_device_schedule_sch_unregister [S390] cio: wake up on failed recognition [S390] fix hypfs build failure [PATCH] sysrq: include interrupt.h instead of irq.h
-
Brian Maly authored
The current logic for dmi matching in efifb does not allow efifb to load on all hardware that we can dmi match for. For a real world example, boot with elilo (3.7 or 3.8 vanilla) and on a Apple (MacBook) and EFI framebuffer driver will not load (you will have no video). This specific hardware is efi v1.10, so we have UGA and not GOP. Without special bootloader magic (i.e. extra elilo patches for UGA graphics detection) no screen info will be passed to the kernel and as a result efifb will not load. This patch allows the dmi match to happen by moving it to earlier in efifb_init, and sets the video type (in set_system) so that efifb can load when we have a valid dmi match and already know the specifics of the hardware. Without this patch the efifb driver will fail to load in the event screen info is not found and passed in by the bootloader, being that we will never get to look for a dmi match. A primary reason for matching with dmi is because not all bootloaders detect the video info properly. The solution is that in the event of a dmi match, we should set screen_info.orig_video_isVGA. Most bootloaders fail to set screen info on Apple hardware, and this is a big problem for people who use Apple hardware. Tested on a MacBook SantaRosa with elilo-3.8 (vanilla) and resolves the issue, the dmi match now works, EFI framebuffer now loads and video works. Signed-off-by:
Brian Maly <bmaly@redhat.com> Acked-by:
Huang Ying <ying.huang@intel.com> Cc: Krzysztof Helt <krzysztof.h1@poczta.fm> Cc: Chandramouli Narayanan <mouli@linux.intel.com> Acked-by:
Peter Jones <pjones@redhat.com> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
Krzysztof Helt authored
Remove Kconfig option for tridentfb acceleration. The acceleration can be switched off with modules "noaccel" parameter. The acceleration for Trident chips was fixed in the 2.6.27 kernel. Also, add CyberXXX and CyberBlade names to Kconfig option's name. It should make easier to find the tridentfb choice for cyblafb driver's users. The cyblafb driver has been replaced by the tridentfb driver. Signed-off-by:
Krzysztof Helt <krzysztof.h1@wp.pl> Signed-off-by:
-
Krzysztof Helt authored
Save one fifo entry on cursor enabling and disabling. Save another fifo entry for FB_CUR_SETPOS operation by removing redundant one. Signed-off-by:
-
Krzysztof Helt authored
A hardware cursor is left enabled in the fb_set_par() which is called when a new console is created. This is inconsistent with software cursor's behaviour. Also, this makes a hardware cursor always visible in the Xfbdev (Xorg kdrive) server. Signed-off-by:
-
Alessio Igor Bogani authored
Remove mutex from the nvidiafb_open/nvidiafb_release functions as these operations are mutexed at fb layer. Signed-off-by:
Alessio Igor Bogani <abogani@texware.it> Cc: Krzysztof Helt <krzysztof.h1@wp.pl> Signed-off-by:
-
Wolfgang Kroener authored
Add suspend/resume for the Acer Travelmate 290D/292LMi with the following graphic-chip: 01:00.0 VGA compatible controller [0300]: ATI Technologies Inc RV350 [Mobility Radeon 9600 M10] [1002:4e50] (prog-if 00 [VGA controller]) Subsystem: Acer Incorporated [ALI] TravelMate 290 [1025:005a] Flags: bus master, 66MHz, medium devsel, latency 128, IRQ 10 Memory at a8000000 (32-bit, prefetchable) [size=128M] I/O ports at c100 [size=256] Memory at e0010000 (32-bit, non-prefetchable) [size=64K] [virtual] Expansion ROM at a0000000 [disabled] [size=128K] Capabilities: [58] AGP version 2.0 Capabilities: [50] Power Management version 2 Kernel driver in use: radeonfb Kernel modules: radeonfb Signed-off-by:
Wolfgang Kroener <lkml@azog.de> Cc: Krzysztof Helt <krzysztof.h1@poczta.fm> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by:
-
Felipe Contreras authored
The blank operation should receive FB_BLANK_POWERDOWN, not VESA_POWERDOWN. Signed-off-by:
Felipe Contreras <felipe.contreras@nokia.com> Cc: Krzysztof Helt <krzysztof.h1@poczta.fm> Cc: Russell King <rmk@arm.linux.org.uk> Cc: Andrea Righi <righi.andrea@gmail.com> Acked-by:
Trilok Soni <soni.trilok@gmail.com> Cc: Imre Deak <imre.deak@solidboot.com> Signed-off-by:
-
Michal Januszewski authored
If the vbemode option is used, uvesafb calls fb_get_mode() without first setting the resolution in info->var. This results in a division by zero in fb_get_mode(), as evidenced e.g. in [1]. Fix this by ensuring the info->var structure is populated before fb_get_mode() is called. [1] http://bugzilla.kernel.org/show_bug.cgi?id=11661#c37Signed-off-by:
Michal Januszewski <spock@gentoo.org> Cc: Krzysztof Helt <krzysztof.h1@poczta.fm> Signed-off-by:
-
Krzysztof Helt authored
A tridentfb driver has all the functionality of the cyblafb driver without the bugs of the latter. Changes to the tridentfb driver: - FBINFO_READS_FAST added to the tridentfb. The cyblafb used a blitter for scrolling which is faster than color expansion on Cyberblade chipsets. The blitter is slower on a discrete Blade3D core. Use the blitter for scrolling in the tridentfb only for integrated Blade3D cores. Now, scrolling speed is about equal for the tridentfb and the cyblafb. - a copyright notice addition is done on request of Jani Monoses (the first author of the tridentfb). Tested on AGP Blade3D card and PCChips M787CLR motherboard: VIA C3 cpu + VT8601 north bridge (aka Cyberblade/i1). Signed-off-by:
-
Ben Dooks authored
Add support for the newer Samsung devices, such as found in the S3C2443, S3C6400 or S3C6410 series SoC. It currently does not support all the alpha- or chroma-key options but it will support more exporting more than one framebuffer ready for adding overlay and blending functions. Signed-off-by:
Ben Dooks <ben-linux@fluff.org> Cc: Krzysztof Helt <krzysztof.h1@poczta.fm> Signed-off-by:
-
Herton Ronaldo Krzesinski authored
There is no entry for n411.c to be built, include one in Makefile. Signed-off-by:
Herton Ronaldo Krzesinski <herton@mandriva.com.br> Cc: Jaya Kumar <jayakumar.lkml@gmail.com> Cc: Krzysztof Helt <krzysztof.h1@poczta.fm> Signed-off-by:
-
Roel Kluin authored
Otherwise this will already return 0 if iteration MAXLOOP-2 occurs in the first loop. Signed-off-by:
Roel Kluin <roel.kluin@gmail.com> Cc: Joseph Chan <josephchan@via.com.tw> Signed-off-by:
-
Roel Kluin authored
Signed-off-by:
Michal Januszewski <michalj@gmail.com> Cc: Krzysztof Helt <krzysztof.h1@poczta.fm> Signed-off-by:
-
Roel Kluin authored
Signed-off-by:
-
Roel Kluin authored
Signed-off-by:
Ondrej Zajicek <santiago@crfreenet.org> Cc: Krzysztof Helt <krzysztof.h1@poczta.fm> Signed-off-by:
-
Andres Salomon authored
- fix cmap leak in removal path - fix cmap leak when register_framebuffer fails - check return value of fb_alloc_cmap - don't continue with driver setup if register_framebuffer fails [krzysztof.h1@wp.pl: spotted missing iounmap] [randy.dunlap@oracle.com: move data declaration before any code] Signed-off-by:
Andres Salomon <dilinger@debian.org> Cc: Krzysztof Helt <krzysztof.h1@wp.pl> Signed-off-by:
Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by:
-
Roel Kluin authored
With for(div = 0; div < max_clk_div; div++) { ... } div reaches max_clk_div. Signed-off-by: -
Kristoffer Ericson authored
The s1d13xxx chip provides two values of identification value: the Production id (e.g 13506/13505/13806..) and a revision number 0,1,2,3). Together these can help us to differentiate between similiar setups. This patch adds the proper way of grabbing both those values and save them for future reference (in order to decide what functions a card supports, e.g acceleration). We also move away from the concept of all s1d13xxx = s1d13806 when we really support alot more. [akpm@linux-foundation.org: coding-style fixes] [akpm@linux-foundation.org: simplify s1d13xxxfb_probe()] Signed-off-by: Kristoffer Ericson <kristoffer.ericson@gmail.com Cc: Krzysztof Helt <krzysztof.h1@poczta.fm> Signed-off-by:
-
Roel Kluin authored
With a postfix decrement t reaches -1 on timeout which results in a return of 0. Signed-off-by:
-
Andres Salomon authored
Signed-off-by:
-
Andres Salomon authored
- fix cmap leak in removal path - fix cmap leak when register_framebuffer fails Signed-off-by:
-
Andres Salomon authored
- fix cmap leak in removal path - fix cmap leak when register_framebuffer fails - check return value of fb_alloc_cmap Signed-off-by:
-
Andres Salomon authored
Fix cmap leak when register_framebuffer fails. Signed-off-by:
Krzysztof Helt <krzysztof.h1@poczta.fm> Signed-off-by:
-
Andres Salomon authored
- fix cmap leak in removal path - fix cmap leak when register_framebuffer fails Signed-off-by:
-
Andres Salomon authored
Signed-off-by:
-
Andres Salomon authored
Signed-off-by:
-
Andres Salomon authored
Signed-off-by:
-
Andres Salomon authored
Signed-off-by:
-
Andres Salomon authored
Bad example code, no cookie! Signed-off-by:
-
Andres Salomon authored
We were leaking the cmap memory. Signed-off-by:
-
Andres Salomon authored
We were leaking the cmap memory. Signed-off-by:
-
Andres Salomon authored
We were leaking the cmap memory. Signed-off-by:
-
Andres Salomon authored
We were leaking both the cmap memory and the info struct memory. Signed-off-by:
-
Andrew Morton authored
Before: text data bss dec hex filename 3648 2910 32 6590 19be drivers/video/backlight/backlight.o 3226 2812 32 6070 17b6 drivers/video/backlight/lcd.o 30990 16688 8480 56158 db5e drivers/video/console/fbcon.o 15488 8400 24 23912 5d68 drivers/video/fbmem.o After: text data bss dec hex filename 3537 2870 32 6439 1927 drivers/video/backlight/backlight.o 3131 2772 32 5935 172f drivers/video/backlight/lcd.o 30876 16648 8480 56004 dac4 drivers/video/console/fbcon.o 15506 8400 24 23930 5d7a drivers/video/fbmem.o Cc: Andrea Righi <righi.andrea@gmail.com> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Krzysztof Helt <krzysztof.h1@poczta.fm> Signed-off-by:
-
Andrea Righi authored
Fix a circular locking dependency in the frame buffer console driver pushing down the mutex fb_info->lock. Circular locking dependecies occur calling the blocking fb_notifier_call_chain() with fb_info->lock held. Notifier callbacks can try to acquire mm->mmap_sem, while fb_mmap() acquires the locks in the reverse order mm->mmap_sem => fb_info->lock. Tested-by:
Andrey Borzenkov <arvidjaar@mail.ru> Signed-off-by:
Andrea Righi <righi.andrea@gmail.com> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Krzysztof Helt <krzysztof.h1@poczta.fm> Cc: <stable@kernel.org> Signed-off-by:
-
