Remove few unnecessary comments since the macro definitions clearly
justify their purpose.
Signed-off-by: Himanshu Jha <himanshujha199640@gmail.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

Rename the macro definitions with suitable names specifying their
purpose.

* ADIS16201_STARTUP_DELAY_MS: Remove the comment specifying the delay in
  microseconds and rename it with addtition of _MS suffix.

* ADIS16201_MSC_CTRL_ACTIVE_DATA_RDY_HIGH: Rename the macro to make it
  similar to other misc control registers which denotes the data ready
  polarity.

* ADIS16201_DIAG_STAT_FLASH_UPT_FAIL_BIT: Rename to denote it is a
  failure bit.

* ADIS16201_GLOB_CMD_FACTORY_RESET: Remove ambiguous _CAL suffix and add
  _RESET suffix instead to denote factory reset command.
Signed-off-by: Himanshu Jha <himanshujha199640@gmail.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

The `ad7780` driver does not implement setting/getting the sampling
frequency.
For the ad7780/ad7781 devices, the control is done via an external pin,
and the ad7170/ad7171 devices have a fixed sampling rate (so, no control).

For these devices, and similar other that may be added later on,
a AD_SD_CHANNEL_NO_SAMPLE_FREQ() macro has been added, which doesn't set
the IIO_CHAN_INFO_SAMP_FREQ flag.
Signed-off-by: Alexandru Ardelean <alexandru.ardelean@analog.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

Now that the old read/write frequency sysfs attrs have been removed, we
have a clean slate to implement IIO_CHAN_INFO_SAMP_FREQ.

This driver also pre-dates IIO_CHAN_INFO_SAMP_FREQ, and this change
implements this behavior.

The `ad7791_write_raw` would have overlapped quite a bit with the old
read/write frequency functions, making things a bit harder to follow.

Fixes: a13e831f ("staging: iio: ad7192: implement
IIO_CHAN_INFO_SAMP_FREQ")
Signed-off-by: Alexandru Ardelean <alexandru.ardelean@analog.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

In the current state, these attributes are broken, because they are
registered already, and the kernel throws a warning.
The first registration happens via the `IIO_CHAN_INFO_SAMP_FREQ` flag from
the `ad_sigma_delta` driver.

In this commit these attrs are removed, and in the following the
IIO_CHAN_INFO_SAMP_FREQ behavior will be implemented, which replaces these
hooks.

This is done to make things a bit easier to review as there is a bit of
overlap in the patch if it's done all at once.

Fixes: a13e831f ("staging: iio: ad7192: implement IIO_CHAN_INFO_SAMP_FREQ")
Signed-off-by: Alexandru Ardelean <alexandru.ardelean@analog.com>
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

Similar to other common iio frameworks, move cros_ec_sensors_core.h from
drivers/iio/common/cros_ec_sensors/ to include/linux/iio/common.
Signed-off-by: Gwendal Grignou <gwendal@chromium.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

The Apex Embedded Systems STX104 series of devices provides 4 TTL
compatible lines of inputs accessed via a single 4-bit port. Since four
input lines are acquired on a single port input read, the STX104 GPIO
driver may improve multiple input reads by utilizing a get_multiple
callback. This patch implements the stx104_gpio_get_multiple function
which serves as the respective get_multiple callback.

Cc: Jonathan Cameron <jic23@kernel.org>
Cc: Hartmut Knaack <knaack.h@gmx.de>
Cc: Lars-Peter Clausen <lars@metafoo.de>
Cc: Peter Meerwald-Stadler <pmeerw@pmeerw.net>
Signed-off-by: William Breathitt Gray <vilhelm.gray@gmail.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

ixjuser.h includes the telephony.h header. Other than that no kernel
code uses any of these headers. The last user of the ixjuser.h header
has been removed in commit 7326446c (Staging: remove telephony
drivers), more than 5 years ago.
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Add a TODO file describing what needs to be added/changed before the driver
can be moved out of staging.
Signed-off-by: Razvan Stefanescu <razvan.stefanescu@nxp.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Add a README file describing the driver architecture, components and
interfaces.
Signed-off-by: Razvan Stefanescu <razvan.stefanescu@nxp.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Signed-off-by: Razvan Stefanescu <razvan.stefanescu@nxp.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Add driver information, link details and hardware statistics to be
reported via ethtool -S.
Signed-off-by: Razvan Stefanescu <razvan.stefanescu@nxp.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Introduce the DPAA2 Ethernet Switch driver, which manages Datapath Switch
(DPSW) objects discovered on the MC bus.
Suggested-by: Alexandru Marginean <alexandru.marginean@nxp.com>
Signed-off-by: Razvan Stefanescu <razvan.stefanescu@nxp.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Add the command build/parse APIs for operating on DPSW objects through
the DPAA2 Management Complex.
Signed-off-by: Razvan Stefanescu <razvan.stefanescu@nxp.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Move the source files out of staging into their final locations:
- dpcon.c goes to drivers/bus/fsl-mc/, next to the core infrastructure
- dpcon-cmd.h gets merged into drivers/bus/fsl-mc/fsl-mc-private.h, next
  to the other internally used APIs
- dpcon.h gets merged into include/linux/fsl/mc.h, exposing the public
  API

Update references in the dpaa2-eth staging driver.

DPCON stands for Data Path Concentrator - an interface between DPIO
(Data Path IO) and its users (e.g. dpaa2-eth). You can read more about
DPIO in Documentation/networking/dpaa2/overview.rst
Signed-off-by: Bogdan Purcareata <bogdan.purcareata@nxp.com>
Reviewed-by: Laurentiu Tudor <laurentiu.tudor@nxp.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Move the source files out of staging into their final locations:
- dpbp.c goes to drivers/bus/fsl-mc/, next to the core infrastructure
- dpbp-cmd.h gets merged into drivers/bus/fsl-mc/fsl-mc-private.h, next
  to the other internally used APIs
- dpbp.h gets merged into include/linux/fsl/mc.h, exposing the public
  API

Update references in the dpaa2-eth staging driver.

DPBP stands for Data Path Buffer Pool - you can read more about the
object in Documentation/networking/dpaa2/overview.rst
Signed-off-by: Bogdan Purcareata <bogdan.purcareata@nxp.com>
Reviewed-by: Laurentiu Tudor <laurentiu.tudor@nxp.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

No one has publicly stepped up to maintain this broken codebase for
devices that no one uses anymore, so let's just drop the whole thing.

If someone really wants/needs it, we can revert this and they can fix
the code up to work properly.

Cc: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Remove comments inbetween code as in this case.
Signed-off-by: HariPrasath Elango <hariprasath.elango@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Custom TKIP decryption replaced with lib80211 implementation.
MIC check use lib80211 too.
Signed-off-by: Ivan Safonov <insafonov@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

These are dead code, including in the downstream Raspberry Pi tree.
Signed-off-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Now we just need to get the other drivers merged and finish the style
cleanups/garbage collecting so we can get out of staging.
Signed-off-by: Eric Anholt <eric@anholt.net>
Acked-by: Stefan Wahren <stefan.wahren@i2se.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

The VCHIQ firmware communication channel operates in parallel with our
other mailbox-based channel.  This is the communication channel that
exposes the firmware's media decode/encode and ISP interfaces.
Signed-off-by: Eric Anholt <eric@anholt.net>
Acked-by: Stefan Wahren <stefan.wahren@i2se.com> (v2)
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

The VCHIQ communication channel can be provided by BCM283x and Capri
SoCs, to communicate with the VPU-side OS services.
Signed-off-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

It's been tempting to replace this with (L1) cache_line_size(), but
that's really not what the value is about.  It's about coordinating
the condition for the pagelist fragment behavior between the two
sides.  However, the property was not accepted for the upstream DT
binding, so we have to use the firmware's fallback value.
Signed-off-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

The ccree driver is now in the cryptodev tree, so remove it from
drivers/staging as it's no longer needed here.

Based on a patch from Gilad, but the mailing list didn't like it :(
Signed-off-by: Gilad Ben-Yossef <gilad@benyossef.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

This was requested by Rob Herring in DT bindings review.
Signed-off-by: Eric Anholt <eric@anholt.net>
Acked-by: Stefan Wahren <stefan.wahren@i2se.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Clean up checkpatch error:
ERROR: do not initialise globals to 0
Signed-off-by: Ji-Hun Kim <ji_hun.kim@samsung.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Fix 'line over 80 characters' issue found by checkpatch.pl script in
handle_scan_done().
Signed-off-by: Ajay Singh <ajay.kathat@microchip.com>
Reviewed-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Fix 'Avoid camelCase' issue found by checkpatch.pl script.
Signed-off-by: Ajay Singh <ajay.kathat@microchip.com>
Reviewed-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Fix 'Avoid camelCase' issue found by checkpatch.pl script.
Signed-off-by: Ajay Singh <ajay.kathat@microchip.com>
Reviewed-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Rename variables with datatype 'u8' in their name to follow the linux
coding style.

Renamed following variables:
u8abort_running_scan
pu8Buffer
pu8keybuf
pu8msa
u8remain_on_chan_flag
Signed-off-by: Ajay Singh <ajay.kathat@microchip.com>
Reviewed-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Refactor handle_disconnect() to avoid line over 80 characters issue
reported by checkpatch.pl script.
Signed-off-by: Ajay Singh <ajay.kathat@microchip.com>
Reviewed-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Fix 'line over 80 characters' issue reported by checkpatch.pl script.
Signed-off-by: Ajay Singh <ajay.kathat@microchip.com>
Reviewed-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Fix 'line over 80 character' issue reported by checkpatch.pl script in
handle_scan().
Signed-off-by: Ajay Singh <ajay.kathat@microchip.com>
Reviewed-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Cleanup patch to avoid use of uppercase for label names, to follow linux
coding style.
Signed-off-by: Ajay Singh <ajay.kathat@microchip.com>
Reviewed-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Fix 'Avoid camelCase' issue found by checkpatch.pl script.
Signed-off-by: Ajay Singh <ajay.kathat@microchip.com>
Reviewed-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Fix 'Avoid camelCase' issue found by checkpatch.pl script.
Signed-off-by: Ajay Singh <ajay.kathat@microchip.com>
Reviewed-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Refactor cfg_scan_result() API to avoid 'line over 80 chars' issue
reported by checkpatch.pl script.
Signed-off-by: Ajay Singh <ajay.kathat@microchip.com>
Reviewed-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Fix 'Avoid camelCase' issue found by checkpatch.pl script.
Signed-off-by: Ajay Singh <ajay.kathat@microchip.com>
Reviewed-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Fix 'line over 80 char' issue found in checkpatch.pl script.
Signed-off-by: Ajay Singh <ajay.kathat@microchip.com>
Reviewed-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>